AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

D4D TRACTOR--SPECIAL APPLICATION 84J01525-01929 (MACHINE) POWER TRAIN Caterpillar SIS



TRACK-TYPE TRACTOR D4D TRACK-TYPE TRACTOR 84J
 D4D TRACTOR--SPECIAL APPLICATION 84J01525-01929 (MACHINE) UEG0683S D4D 84J   (1968)

Parts group D4D:

  For full view, you need register
POWER TRAIN
CLUTCH GP
FLYWHEEL CLUTCH CONTROL
4K-5030 FLYWHEEL CLUTCH CONTROL
FLYWHEEL CLUTCH CONTROL (4K5030 N/S)
FLYWHEEL CLUTCH GROUP
4K-5034 FLYWHEEL CLUTCH GROUP
4K5034 FLYWHEEL CLUTCH GROUP--Part 1 of 3
7S7602 Pump parts are shown on Page 44
4K-5034 FLYWHEEL CLUTCH GROUP
4K5034 FLYWHEEL CLUTCH GROUP--Part 2 of 3
5K5008 Drive Shaft parts are shown on Page 44
4K-5034 FLYWHEEL CLUTCH GROUP
4K5034 FLYWHEEL CLUTCH GROUP--Part 3 of 3
PUMP GP
OIL PUMP GROUP
7S-7602 OIL PUMP GROUP
7S7602 OIL PUMP GROUP
Part of 4K5034 Flywheel Clutch Group shown on Page 41
SHAFT GP
UNIVERSAL JOINT GP
5K-5008 UNIVERSAL JOINT GP
5K5008 DRIVE SHAFT ASSEMBLY
Part of 4K5034 Flywheel Clutch Group shown on Page 42
TRANSMISSION GP
TRANSMISSION ARRANGEMENT
6K-2687 TRANSMISSION ARRANGEMENT
6K2687 TRANSMISSION ARRANGEMENT
Gear Shift Control, Transmission and Transmission Case &
Covers are shown on Pages 46, 47, 48, 49 and 52
TRANSMISSION
6K-2686 TRANSMISSION
TRANSMISSION (6K2686 N/S)--Part 1 of 2
Part of 6K2687 Transmission Arrangement shown on Page 45. Note: This Transmission provides the following
Speeds: (Forward) First-2.5, Second-2.9, Third-3.5, Fourth-4.0 and Fifth-4.6 M.P.H. (Reverse) First-3.0,
Second-3.4, Third-4.2, Fourth-4.8 and Fifth-5.5 M.P.H.
6K-2686 TRANSMISSION
TRANSMISSION (6K2686 N/S)--Part 2 of 2
Part of 6K2687 Transmission Arrangement shown on Page 45
TRANSMISSION CASE AND COVERS
4K-5032 TRANSMISSION CASE AND COVERS
TRANSMISSION CASE AND COVERS (4K5032 N/S)
Part of 6K2687 Transmission Arrangement shown on Page 45
DRIVE GP-FINAL
FINAL DRIVE
6K-4665 FINAL DRIVE
FINAL DRIVE (6K4665 N/S)--Upper Half--Part 1 of 2
Serial No. 84J1525 to 84J1778 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides
6K-4665 FINAL DRIVE
FINAL DRIVE (6K4665 N/S)--Lower Half--Part 2 of 2
Serial No. 84J1525 to 84J1778 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides
1V3672 Snow Sprocket Replacement Rim is available
FINAL DRIVE GROUP
6K-4665 FINAL DRIVE GROUP
6K4665 FINAL DRIVE GROUP--Upper Half--Part 1 of 2
Serial No. 84J1779 to 84J1825 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides
6K-4665 FINAL DRIVE GROUP
6K4665 FINAL DRIVE GROUP--Lower Half-Part 2 of 2
Serial No. 84J1779 to 84J1825 inclusive
Note: Quantities shown are those required for both R.H. and L.H. sides
1V3672 Snow Sprocket Replacement Rim is available
FINAL DRIVE GROUP
6K-4665 FINAL DRIVE GROUP
6K4665 FINAL DRIVE GROUP--Upper Half-Part 1 of 2
Serial No. 84J1826-Up
Note: Quantities shown are those required for both R.H. and L.H. sides
6K-4665 FINAL DRIVE GROUP
6K4665 FINAL DRIVE GROUP--Lower Half-Part 2 of 2
Serial No. 84J1826-Up
Note: Quantities shown are those required for both R.H. and L.H. sides
1V3672 Snow Sprocket Replacement Rim is available

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Service Magazine
Neutral Start Circuit Added To Prevent Operation Of The Electric Starting Motor When The Transmission Is In Gear{1424,3060,3065,3070,1453,1408}
1980/12/01
Specifications
Flywheel Clutch And Interlock Linkage
D4 (SA) TRACTOR POWER TRAIN
Flywheel Clutch Oil Pump<BR> (7S7602)
D4 (SA) TRACTOR POWER TRAIN
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Disassembly and Assembly
Flywheel Clutch Brake (Direct Drive &amp; Special Application)
D4D TRACTOR POWER TRAIN
Flywheel Clutch Oil Pump (Direct Drive &amp; Special Application)
D4D TRACTOR POWER TRAIN
Flywheel Clutch And Hub (Direct Drive &amp; Special Application)
D4D TRACTOR POWER TRAIN
Service Magazine
Hardened Idler Gear Now Used In Oil Pump For Flywheel Clutch{3056}
1978/05/22
Specifications
Steering Clutch Controls
D4 (SA) TRACTOR POWER TRAIN
Disassembly and Assembly
Steering Clutch Controls
D4D TRACTOR POWER TRAIN
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Disassembly and Assembly
Transmission Hydraulic Controls (Power Shift)
D4D TRACTOR POWER TRAIN
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Specifications
Bevel Gear And Steering Clutch
D4 (SA) TRACTOR POWER TRAIN
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}
Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Bevel Gear And Shaft
D4D TRACTOR POWER TRAIN
Bevel Gear And Pinion Shaft Settings (Direct Drive, Special Application &amp; Power Shift)
D4D TRACTOR POWER TRAIN
Torque Converter, Transmission And Transfer Gears (Power Shift)
D4D TRACTOR POWER TRAIN
Service Magazine
Loose Pinion Shaft In Transfer Gear Group: Increased Torque On Lock Nut{3159,3254}
1981/04/06
Locknut Now Used On Pinion Shaft In Transfer Gear Groups And Power Takeoff Group{3159,3254}
1979/11/26
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}
Thermal Spray Procedures for Bevel Gear Shafts{0679, 3256}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Specifications
Flexible Coupling Drive
3304 VEHICULAR ENGINE
Checking And Adjusting Alignment Of The Flexible Coupling Drive
3304 VEHICULAR ENGINE
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Disassembly and Assembly
Flexible Coupling Drive (Power Shift)
D4D TRACTOR POWER TRAIN
Service Magazine
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Transmission Oil Filter (Power Shift)
D4D TRACTOR POWER TRAIN
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2007/12/17
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Specifications
Bevel Gear And Steering Clutch
D4 (SA) TRACTOR POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Disassembly and Assembly
Bevel Gear And Shaft
D4D TRACTOR POWER TRAIN
Bevel Gear And Pinion Shaft Settings (Direct Drive, Special Application &amp; Power Shift)
D4D TRACTOR POWER TRAIN
Torque Converter, Transmission And Transfer Gears (Power Shift)
D4D TRACTOR POWER TRAIN
Service Magazine
Loose Pinion Shaft In Transfer Gear Group: Increased Torque On Lock Nut{3159,3254}
1981/04/06
Locknut Now Used On Pinion Shaft In Transfer Gear Groups And Power Takeoff Group{3159,3254}
1979/11/26
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Disassembly and Assembly
Transmission Oil Filter (Power Shift)
D4D TRACTOR POWER TRAIN
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Universal Joint
D4 (SA) TRACTOR POWER TRAIN
Flywheel Clutch And Interlock Linkage
D4 (SA) TRACTOR POWER TRAIN
Bevel Gear And Steering Clutch
D4 (SA) TRACTOR POWER TRAIN
Steering Clutch Controls
D4 (SA) TRACTOR POWER TRAIN
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Sprocket Assemblies
D4D TRACTOR POWER TRAIN
Final Drive Cases, Gears, And Hubs
D4D TRACTOR POWER TRAIN
Sprocket Shafts
D4D TRACTOR POWER TRAIN
Steering Clutch Controls
D4D TRACTOR POWER TRAIN
Bevel Gear And Shaft
D4D TRACTOR POWER TRAIN
Bevel Gear And Pinion Shaft Settings (Direct Drive, Special Application &amp; Power Shift)
D4D TRACTOR POWER TRAIN
Transmission Oil Filter (Power Shift)
D4D TRACTOR POWER TRAIN
Drive Shaft (Direct Drive &amp; Special Application)
D4D TRACTOR POWER TRAIN
Flexible Coupling Drive (Power Shift)
D4D TRACTOR POWER TRAIN
Flywheel Clutch Brake (Direct Drive &amp; Special Application)
D4D TRACTOR POWER TRAIN
Flywheel Clutch Oil Pump (Direct Drive &amp; Special Application)
D4D TRACTOR POWER TRAIN
Transmission Oil Pump (Power Shift)
D4D TRACTOR POWER TRAIN
Flywheel Clutch And Hub (Direct Drive &amp; Special Application)
D4D TRACTOR POWER TRAIN
Torque Converter (Power Shift)
D4D TRACTOR POWER TRAIN
Gearshift Controls (Direct Drive &amp; Special Application)
D4D TRACTOR POWER TRAIN
Transmission Hydraulic Controls (Power Shift)
D4D TRACTOR POWER TRAIN
Torque Converter, Transmission And Transfer Gears (Power Shift)
D4D TRACTOR POWER TRAIN
Service Magazine
Neutral Start Circuit Added To Prevent Operation Of The Electric Starting Motor When The Transmission Is In Gear{1424,3060,3065,3070,1453,1408}
1980/12/01
Use 6V4032 Adapter Plate During Preload Adjustment Of Final Drive Bearings{4066,4074,4054,4053,0626}
1981/04/20
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Locknut Now Used On Pinion Shaft In Transfer Gear Groups And Power Takeoff Group{3159,3254}
1979/11/26
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Service Magazine
Locknut Now Used On Pinion Shaft In Transfer Gear Groups And Power Takeoff Group{3159,3254}
1979/11/26
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Transmission Oil Pump (Power Shift)
D4D TRACTOR POWER TRAIN
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Specifications
Universal Joint
D4 (SA) TRACTOR POWER TRAIN
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Disassembly and Assembly
Drive Shaft (Direct Drive &amp; Special Application)
D4D TRACTOR POWER TRAIN
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Disassembly and Assembly
Sprocket Assemblies
D4D TRACTOR POWER TRAIN
Sprocket Shafts
D4D TRACTOR POWER TRAIN
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Special Instruction
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Use 6V4032 Adapter Plate During Preload Adjustment Of Final Drive Bearings{4066,4074,4054,4053,0626}
1981/04/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
Cast Aluminum Stator Wheels for Torque Converters {3101, 3129}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Repair of Pump Drive Gears for Torque Converters {3100, 3101}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101}
Thermal Spray Procedures for Torque Converter Output Flange {0679, 3101}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Torque Converter Flange - Bearing Diameter {0679, 3101}
Thermal Spray Procedures for Torque Converter Flange - Bearing Diameter {0679, 3101}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Torque Converter (Power Shift)
D4D TRACTOR POWER TRAIN
Torque Converter, Transmission And Transfer Gears (Power Shift)
D4D TRACTOR POWER TRAIN
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Special Instruction
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Specifications
Transmission
D4 (SA) TRACTOR POWER TRAIN
Engine Mounting Bolts
3304 VEHICULAR ENGINE
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Sintered Bronze Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Repair of Reaction Dowel Holes in Transmission Clutch Housings {3030, 3155, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission Oil Cooler
D4 TRACTOR ENGINE
Transmission Oil Filter (Power Shift)
D4D TRACTOR POWER TRAIN
Transmission Oil Pump (Power Shift)
D4D TRACTOR POWER TRAIN
Transmission (Direct Drive &amp; Special Application)
D4D TRACTOR POWER TRAIN
Transmission Hydraulic Controls (Power Shift)
D4D TRACTOR POWER TRAIN
Torque Converter, Transmission And Transfer Gears (Power Shift)
D4D TRACTOR POWER TRAIN
Service Magazine
Neutral Start Circuit Added To Prevent Operation Of The Electric Starting Motor When The Transmission Is In Gear{1424,3060,3065,3070,1453,1408}
1980/12/01
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Portable Test and Fill Machine Designed for a Service Vehicle but Works Fast Enough for the Shop {0768}
2006/02/27
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Disassembly and Assembly
Transmission Hydraulic Controls (Power Shift)
D4D TRACTOR POWER TRAIN
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Disassembly and Assembly
Transmission Oil Cooler
D4 TRACTOR ENGINE
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Specifications
Final Drive
D4 (SA) TRACTOR POWER TRAIN
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Brake Drums for Track-Type Tractors and Loaders{4050, 4252}
Brake Drums for Track-Type Tractors and Loaders{4050, 4252}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Final Drive Cases, Gears, And Hubs
D4D TRACTOR POWER TRAIN
Final Drive Pinions And Flanges
D4D TRACTOR POWER TRAIN
Service Magazine
Use 6V4032 Adapter Plate During Preload Adjustment Of Final Drive Bearings{4066,4074,4054,4053,0626}
1981/04/20
Stronger Recoil Springs Used{4158,4157,4151,4055}
1977/11/28
Stronger Final Drive Gear And Pinion Used{4055,4091}
1978/01/09
Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Truck sale:

Caterpillar D4D, Construction
14,000 
Caterpillar D4D, Construction
- Dozers
MICHIGAN CAT
CATERPILLAR D4D 1966
 
CATERPILLAR D4D 1966
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR D4D 1973
 
CATERPILLAR D4D 1973
- TRACK TYPE TRACTORS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CAT D4D
USD $39,016 
CAT D4D

Hydraulics & Tractors Service Pty Ltd
Dubbo, NSW, Australia
CAT D4D
USD $18,900 
CAT D4D

DRC Ranch
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.