AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7L342 FUEL INJECTION VALVES AND LINES GROUP Part of 3N3207 Basic Engine Arrangement listed on Page 15 Only separate parts serviced 3304


FUEL SYSTEM
LINES GP-FUEL
CONTROL GP-FUEL RATIO
TORQUE CONTROL GP
CONTROL GP-FUEL RATIO
TORQUE CONTROL GP
CONTROL GP-GOVERNOR

INDUSTRIAL ENGINE 3304 INDUSTRIAL ENGINE 04B
 3304 ENGINE 04B06032-07793 UEG0687S 3304 04B   (1968)

FUEL SYSTEM

LINES GP-FUEL
LINES GP-FLEXIBLE FUEL
3N-6668 LINES GP-FLEXIBLE FUEL
LINES GP-FLEXIBLE FUEL
3N-6668 LINES GP-FLEXIBLE FUEL
FLEXIBLE FUEL LINES GROUP
8L-4454 FLEXIBLE FUEL LINES GROUP
FUEL INJECTION VALVES AND LINES GROUP
7L-0342 FUEL INJECTION VALVES AND LINES GROUP
FUEL INJECTION VALVES AND LINES GROUP
1N-5313 FUEL INJECTION VALVES AND LINES GROUP
 

#UEG0687S0180
 

7L-0342: FUEL INJECTION VALVES AND LINES GROUP

7L342 FUEL INJECTION VALVES AND LINES GROUP
Part of 3N3207 Basic Engine Arrangement listed on Page 15
Only separate parts serviced
c140885 UEG0687S
7L0342 FUEL INJECTION VALVES AND LINES GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1N-5404 [1] LINE ASSEM. (No. 4)  
2. 1N-5403 [1] LINE ASSEM. (No. 3)  
3. 1N-5402 [1] LINE ASSEM. (No. 2)  
4. 1N-5401 [1] LINE ASSEM. (No. 1)  
5. 7S-9891 [4] VALVE SERVICE GROUP  
6. 6F-1069 [4] SEAL ASSEM.  
7. 5B-3718 [4] SEAL  
    (1 each in 7L9891 Valve Service Group)
8. 5H-7225 [4] NUT  
9. 7M-4603 [4] BODY  
10. 6F-8868 [6] CLAMP  
11. 4H-1966 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
12. 4S-8385 H TUBING (.250" O.D.) 17.67" Long  
13. 2B-2404 [1] CLIP  
14. 0S-0509 [1] BOLT  
15. 3B-4506 [4] LOCKWASHER  
16. 1A-2029 [1] BOLT  
17. 0S-1588 [1] BOLT  
18. 8M-5248 [2] SEAL  
19. 3N-3694 C [1] BRACKET  
20. 8M-5253 [1] SEAL  
21. 3J-5389 [1] PLUG  
22. 0S-1591 [1] BOLT  
23. 1D-4569 C [1] BOLT  
24. 4L-3754 [1] LOCK  
25. 8M-5260 [1] SEAL  
26. 3B-7896 [1] ELBOW  
27. 4S-6574 [1] GAUGE (Fuel Pressure)  
28. 0S-1615 [3] BOLT  
29. 1B-4330 [3] NUT  
30. 3B-4504 [3] LOCKWASHER  
  C   INDICATES CHANGE
  H   ORDER BY THE FOOT
 

#UEG0687S0181
 

1N-5313: FUEL INJECTION VALVES AND LINES GROUP

1N5313 FUEL INJECTION VALVES AND LINES GROUP
Part of 3N6707 Engine Procurement Arrangement listed on Page 13
Only separate parts serviced
c140432 UEG0687S
1N5313 FUEL INJECTION VALVES AND LINES GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-6214 [1] LINE ASSEM. (No. 4)  
2. 8L-6213 [1] LINE ASSEM. (No. 3)  
3. 8L-6212 [1] LINE ASSEM. (No. 2)  
4. 8L-6211 [1] LINE ASSEM. (No. 1)  
5. 7S-9891 [4] VALVE GROUP  
6. 6F-1069 [1] SEAL ASSEM.  
7. 5B-3718 [1] SEAL  
8. 5H-7225 [4] NUT  
9. 8S-2389 [4] BODY  
10. 5M-5690 [8] DAMPER  
11. 4H-1966 [1] FITTING  
  4H-2495 [1] NUT  
  4H-2494 [1] SLEEVE  
12. 8L-4450 [1] TUBE  
13. 2B-2404 [1] CLIP  
14. 0S-0509 [1] BOLT  
15. 3B-4506 [4] LOCKWASHER  
16. 1A-2029 [1] BOLT  
17. 0S-1588 [1] BOLT  
18. 8M-5248 C [2] SEAL  
19. 3N-3694 C [1] BRACKET  
20. 8M-5253 C [1] SEAL  
21. 3J-5389 [1] PLUG  
22. 0S-1591 [1] BOLT  
23. 1D-4569 C [1] BOLT  
24. 4L-3754 [1] LOCK  
25. 8M-5260 C [1] SEAL  
26. 3B-7896 [1] ELBOW  
27. 4S-6574 [1] GAUGE (Fuel Pressure)  
28. 1B-7182 [4] BOLT  
29. 1D-4716 C [4] NUT  
30. 3B-4505 [4] LOCKWASHER  
31. 5M-5689 [8] CLAMP  
32. 5L-9125 [1] DAMPER  
33. 5L-9126 [1] DAMPER  
34. 5L-9127 [2] CLAMP  
35. 4F-7957 [3] BOLT  
36. 5L-4126 [3] NUT  
  C   INDICATES CHANGE
 

#UEG0687S0182
 

8L-4184: FUEL RATIO CONTROL GROUP

8L4184 FUEL RATIO CONTROL GROUP--Type 1
AN ATTACHMENT
c117627 UEG0687S
8L4184 FUEL RATIO CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1F-9369 [1] TEE  
  5M-6214 [1] PLUG  
  6L-6035 [1] DOWEL  
  6L-5764 [1] COVER  
  2N-5919 C [3] BOLT (drilled head)  
  1H-5089 [7] LOCKWASHER  
  6L-5766 [1] GASKET  
  6L-5768 [1] SPRING  
  6L-5769 [1] WASHER  
  4F-7957 [2] BOLT (.875 in. long)  
  2M-5471 C [2] BOLT (1.75 in. long)  
  3B-6768 [1] BUSHING  
  3B-8995 [1] FITTING  
  1F-1344 [1] NUT  
    (Part of 3B8995 Fitting)
  8L-4346 [1] TUBE (.25 in. dia.)  
  1F-1344 [1] NUT  
    (Part of 3B9003 Fitting)
  3B-9003 [1] FITTING  
  6L-5767 [1] COVER  
  6L-5771 [1] HOUSING  
  6L-5772 [1] SPRING  
  8L-4183 [1] BOLT  
  6L-5773 [1] GASKET  
  5S-6120 [1] RETAINER ASSEM.  
  4S-7458 [1] DIAPHRAGM  
  C   INDICATES CHANGE
 

#UEG0687S0183
 

8L-8682: GOVERNOR TORQUE SPRING GROUP

8L8682 GOVERNOR TORQUE SPRING GROUP--Type 1
AN ATTACHMENT
c112412 UEG0687S
8L8682 GOVERNOR TORQUE SPRING GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] BOLT  
2. [1] LOCK  
3. [1] INSULATOR  
4. [1] CONTACT (.018" Thick)  
5. [1] BAR  
6. [1] RETAINER  
7. [1] SPRING (.022" Thick)  
8. [1] SPACER (.032" Thick)  
9. [1] RETAINER  
 

#UEG0687S0184
 

8L-4184: FUEL RATIO CONTROL GROUP

8L4184 FUEL RATIO CONTROL GROUP--Type 2
AN ATTACHMENT
c149831 UEG0687S
8L4184 FUEL RATIO CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-6768 [1] BUSHING  
2. 3B-8995 [1] FITTING  
    (Includes)
3. 1F-1344 [1] NUT  
4. 6L-5766 [1] GASKET  
5. 6L-5771 [1] HOUSING  
6. 6L-5773 [1] GASKET  
7. 6L-5772 [1] SPRING  
8. 8L-4183 [1] BOLT  
9. 5S-6120 [1] RETAINER  
10. 4S-7458 [1] DIAPHRAGM  
11. 6L-5767 [1] COVER  
12. 4F-7957 [2] BOLT 2.22 cm(.875 in.) long  
  2M-5471 [2] BOLT 4.45 cm(1.75 in.) long  
13. 1H-5089 [7] LOCKWASHER  
14. 6L-5769 [1] WASHER  
15. 6L-5768 [1] SPRING  
16. 6L-5764 [1] COVER  
17. 2N-5919 [3] BOLT  
18. 6L-6035 [1] DOWEL  
19. 3N-8022 C [1] TUBE  
  3B-8998 [1] ELBOW  
20. 1F-9369 [1] TEE  
21. 5M-6214 [1] PLUG  
  C   INDICATES CHANGE
 

#UEG0687S0185
 

8L-8682: GOVERNOR TORQUE SPRING GROUP

8L8682 GOVERNOR TORQUE SPRING GROUP--Type 2
AN ATTACHMENT
c158355 UEG0687S
8L8682 GOVERNOR TORQUE SPRING GROUP Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [2] BOLT  
2. 9M-6292 [1] LOCK  
3. 1P-6452 [1] INSULATOR  
4. 8S-4317 [1] CONTACT .4572 mm(.018 in.)thick  
5. 2S-7391 [1] BAR  
6. 3S-0602 [1] RETAINER  
7. 9L-3625 [1] SPRING .5588mm(.022 in.)thick  
8. 9L-3626 C [2] SPACER .4064mm(.016 in.)thick  
9. 8M-9062 [1] RETAINER  
10. 1P-9958 C [1] INSULATOR  
  C   INDICATES CHANGE
 

#UEG0687S0186
 

8L-4443: CONTROL GP-GOVERNOR

8L4443 GOVERNOR CONTROL GROUP--Positive Lock
AN ATTACHMENT
c203095 UEG0687S
8L4443 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4279 [1] SHAFT  
2. 4N-4523 C [1] HANDLE ASSEM.  
    (Includes)
3. 4N-9029 [1] WASHER  
4. 4N-4520 C [1] GUIDE  
5. 5K-0605 [1] PLUG  
6. 8L-4282 [1] HUB  
7. 1B-2790 [2] BOLT 3.49 cm(1.375 in.) long  
  1A-9136 H [2] BOLT 1.74 cm(.6875 in.) long  
  1B-9575 [2] BOLT 4.45 cm(1.75 in.) long  
8. 6D-4972 [2] SPACER 1.27 cm(.50 in.) long  
  8L-5449 H [2] SPACER 1.75 cm(.69 in.) long  
  3L-6008 [2] SPACER 2.86 cm(1.125 in.) long  
9. 1D-4716 [2] NUT  
10. 6N-0775 C [1] RATCHET  
11. 7M-1269 [1] SPRING  
12. 3B-4505 [2] LOCKWASHER  
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#UEG0687S0187
 

8L-4444: CONTROL GP-GOVERNOR

8L4444 GOVERNOR CONTROL GROUP--Vernier and Positive Lock
AN ATTACHMENT
c207023 UEG0687S
8L4444 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4279 [1] SHAFT  
2. 7M-1269 [1] SPRING  
3. 5K-0605 [1] PLUG  
4. 8L-4282 [1] HUB  
5. 8L-4436 [1] ROD ASSEM.  
6. 3H-1118 C [1] PIN  
7. 3B-0723 [1] NUT  
8. 8L-4278 [1] BRACKET  
9. 5B-1952 C [1] SPRING  
10. 4N-4735 C [1] ROD END  
11. 1K-6539 [1] PIN  
  3B-4604 [1] COTTER PIN  
12. 8L-9640 [2] SCREW 5.08 cm(2.00 in.) long  
  4B-1288 [2] SCREW 5.72 cm(2.25 in.) long  
  6L-3428 H [2] SCREW 1.91 cm(.75 in.) long  
  6D-4972 [2] SPACER 1.27 cm(.50 in.) long  
  3L-6008 [2] SPACER 2.86 cm(1.125 in.) long  
  8L-5449 [2] SPACER 1.75 cm(.69 in.) long  
13. 4N-4519 C [1] QUADRANT  
14. 6N-0775 C [1] RATCHET  
15. 4N-4520 C [1] GUIDE  
16. 4N-4523 C [1] HANDLE ASSEM.  
17. 4N-9029 [1] WASHER  
18. 1D-4716 [2] NUT  
  3B-4505 [2] LOCKWASHER  
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#UEG0687S0188
 

8L-4445: CONTROL GP-GOVERNOR

8L4445 GOVERNOR CONTROL GROUP--Remote and Positive Lock
AN ATTACHMENT
c203097 UEG0687S
8L4445 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4279 [1] SHAFT  
2. 4N-4523 C [1] HANDLE ASSEM.  
    (Includes)
3. 4N-9029 [1] WASHER  
4. 4N-4520 C [1] GUIDE  
5. 5K-0605 [1] PLUG  
6. 8L-4282 [1] HUB  
7. 4N-4519 C [1] QUADRANT  
8. 6D-4972 [2] SPACER 1.27 cm(.50 in.)long  
  8L-5449 [2] SPACER 1.75 cm(.69 in.)long  
  3L-6008 [2] SPACER 2.86 cm(1.125 in.)long  
9. 1D-4716 [2] NUT  
10. 6N-0775 C [1] RATCHET  
11. 1B-2790 H [2] BOLT 3.49 cm(1.375 in.)long  
  1A-9136 H [2] BOLT 1.74 cm(.6875 in.)long  
  1B-9575 H [2] BOLT 4.45 cm(1.75 in.) long  
  3B-4505 [2] LOCKWASHER  
12. 7M-1269 [1] SPRING  
  C   INDICATES CHANGE
  H   USE AS REQUIRED
 

#UEG0687S0189
 

8N-2177: CONTROL GP-GOVERNOR

8N2177 GOVERNOR CONTROL GROUP
Provides Three Hole Governor Control Lever. AN ATTACHMENT
c220760 UEG0687S
8N2177 CONTROL GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3304 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-1254 [1] BOLT  
2. 3N-4892 [1] LEVER-GOVERNOR CONTROL  
 

Information:

Engine News
Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank
1979/03/07
New Fuel Injection Nozzle Assembly Used
1980/01/23
New Fuel Injection Lines And Clamps Prevent Stresses And Contact Which Can Cause Leakage
1980/03/12
Improvements Made To Water Separator Groups
1980/04/30
Use Only Caterpillar Water Separator Elements
1980/10/01
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Improved Water Separator Group Used
1982/06/16
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
Manufacturing And Design Improvements Incorporated Into Fuel Injection Nozzle Assemblies{1252,1307}
1997/07/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Needle Valve May Be Needed To Accurately Measure Engine Return Fuel Flow{1250,0782}
1999/04/01
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line
1977/09/28
Water Separators Needed On Engines In The Field With SMFS
1977/12/14
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage
1978/04/19
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Disassembly and Assembly
Fuel Injection Valves
D330, D333, 3304, 3306 INDUSTRIAL & MARINE ENGINES
Fuel Ratio Control
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Valves
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Fuel Injection Lines
3304 & 3306 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
New Fuel Injection Lines And Clamps Prevent Stresses And Contact Which Can Cause Leakage{1252}
1980/03/24
Improvements Made To Water Separator Groups{1263}
1980/05/05
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Improved Water Separator Group Used {1263}
1982/05/31
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Higher Torque Can Be Used With 6V6980 Nozzle Puller Group{0706,1254}
1985/06/10
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank{1275,1253,1274}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14

Caterpillar Parts SIS Catalog 3304 :

GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
GOVERNOR GROUP
8L-9650 GOVERNOR GROUP
FUEL INJECTION PUMP GROUP
3N-3387 FUEL INJECTION PUMP GROUP
FUEL INJECTION PUMP AND GOVERNOR GROUP
8L-9651 FUEL INJECTION PUMP AND GOVERNOR GROUP
FUEL INJECTION VALVES AND LINES GROUP
1N-5313 FUEL INJECTION VALVES AND LINES GROUP
FUEL RATIO CONTROL GROUP
8L-4184 FUEL RATIO CONTROL GROUP
GOVERNOR TORQUE SPRING GROUP
8L-8682 GOVERNOR TORQUE SPRING GROUP
FUEL RATIO CONTROL GROUP
8L-4184 FUEL RATIO CONTROL GROUP
GOVERNOR TORQUE SPRING GROUP
8L-8682 GOVERNOR TORQUE SPRING GROUP
CONTROL GP-GOVERNOR
8L-4443 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8L-4444 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8L-4445 CONTROL GP-GOVERNOR

Truck sale:

Caterpillar 303/304 20 HD BUCKET, bucket, Construction
854 
Caterpillar 303/304 20 HD BUCKET, bucket, Construction
- bucket
MILTON CAT
 
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction


Caterpillar 3304B, Stationary Generator Sets, Construction
30,000 
Caterpillar 3304B, Stationary Generator Sets, Construction

FOLEY EQUIPMENT COMPANY
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
650 
Caterpillar 303/304 ADAPTER SSL TO MHE, Schnellwechsler, Bau-Und Bergbauausrüstung
- Quick connectors
MILTON CAT
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
17.000 
Caterpillar 3304, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.