BASIC ENGINE
PISTON & ROD GPCAMSHAFT GP
CYLINDER HEAD GP
VALVE MECHANISM GP
BASIC ENGINE
PISTON & ROD GP#UEG0688S0030
2P-6272: PISTON & ROD GP
2P6272 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 66D8891 to 66D11325 inclusive
Part of 3N3209 Basic Engine Arrangement listed on Page 16
Serial No. 66D8891 to 66D11325 inclusive
Part of 3N3209 Basic Engine Arrangement listed on Page 16
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8M-6487 | [1] | PIN | |
2. | 1S-9543 | [2] | RETAINER | |
3. | 5S-2793 | [1] | ROD ASSEM. | |
7S-9348 | [1] | BEARING | ||
4. | 1P-9956 | [2] | BOLT | |
5S-6348 | [2] | NUT | ||
5. | 7M-7821 | [1] | BEARING (Standard) | |
2S-0502 | [1] | BEARING (.010" Undersize) | ||
2S-0503 | [1] | BEARING (.020" Undersize) | ||
7M-7826 | [1] | BEARING (.030" Undersize) | ||
6. | 2P-6271 | [1] | PISTON GROUP | |
7. | 9S-7788 | [1] | RING (Oil) | |
8. | 5S-6750 | [1] | RING (Intermediate) | |
9. | 7S-8378 | [1] | RING (Top) | |
7S-9404 | [1] | RING GROUP | ||
(Consists of Complete Set of Rings For One Piston) |
#UEG0688S0031
2P-6272: PISTON & ROD GP
2P6272 CONNECTING ROD & PISTON GROUP--6 Required
Serial No. 66D11326-Up
Serial No. 66D11326-Up
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7N-9805 C | [1] | PIN-PISTON | |
2. | 1S-9543 | [2] | RETAINER-PIN | |
3. | 5S-2793 | [1] | ROD AS | |
8N-0703 C | [1] | BEARING | ||
4. | 1P-9956 | [2] | BOLT-CONNECTING ROD | |
5S-6348 | [2] | NUT-SPECIAL | ||
5. | 7M-7821 | [1] | BEARING-CONNECTING ROD | |
2S-0502 | [1] | BEARING-.254MM US (.010IN) | ||
2S-0503 | [1] | BEARING-.508MM US (.020IN) | ||
7M-7826 | [1] | BEARING-.762MM US (.030IN) | ||
6. | 4N-9258 C | [1] | PISTON GP | |
7. | 9S-7788 | [1] | RING-PISTON OIL | |
8. | 5S-6750 | [1] | RING-INTERMEDIATE | |
9. | 9S-3029 | [1] | RING-PISTON TOP | |
9S-3068 C | [1] | RING GP | ||
(CONSISTS OF COMPLETE | ||||
SET OF RINGS FOR | ||||
ONE PISTON) | ||||
C | CHANGE FROM PREVIOUS TYPE |
#UEG0688S0032
2P-6202: CAMSHAFT GP-SINGLE
2P6202 CAMSHAFT GROUP
Part of 3N3209 Basic Engine Arrangement listed on Page 16
Only separate parts serviced
Part of 3N3209 Basic Engine Arrangement listed on Page 16
Only separate parts serviced
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SIS#UEG0688S0033
4N-7446: CYLINDER HEAD AS
4N7446 CYLINDER HEAD ASSEMBLY
Part of 3N3916 Cylinder Head Group shown on Page 26
Part of 3N3916 Cylinder Head Group shown on Page 26
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1S-3062 | [18] | DIRECTOR | |
2. | 2B-0858 C | [3] | PLUG | |
3. | 3B-0623 | [6] | PLUG | |
4. | 3S-8313 | [7] | PLUG | |
5. | 1P-6367 | [1] | COVER | |
6. | 5S-6735 | [1] | GASKET | |
7. | 0S-1594 | [4] | BOLT | |
3B-4506 | [4] | LOCKWASHER | ||
8. | 2P-1262 | [12] | GUIDE | |
9. | 2P-6497 | [1] | HEAD ASSEM. | |
10. | 5S-7218 | [6] | INSERT (Intake) | |
11. | 5S-7221 | [6] | INSERT (Exhaust) | |
C | INDICATES CHANGE |
#UEG0688S0034
3N-3916: CYLINDER HEAD GP
3N3916 CYLINDER HEAD GROUP
Part of 3N3209 Basic Engine Arrangement listed on Page 16. 4N7446 Cylinder Head parts are shown on Page 25
Only separate parts serviced
Part of 3N3209 Basic Engine Arrangement listed on Page 16. 4N7446 Cylinder Head parts are shown on Page 25
Only separate parts serviced
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7S-8809 C | [6] | VALVE (Intake) | |
2. | 2A-4429 | [24] | LOCK | |
3. | 5S-5912 | [12] | RETAINER | |
4. | 7S-7144 | [12] | SPRING | |
5. | 8S-3970 | [6] | CHAMBER ASSEM. | |
7S-3206 | [6] | SEAL | ||
2S-8966 | [6] | KIT (Gasket) | ||
6. | 7S-6767 C | [6] | VALVE (exhaust) | |
7. | 4N-7446 Y | [1] | HEAD ASSEM. | |
(Separate Illustration) | ||||
8. | 5S-6281 | [1] | GASKET | |
C | INDICATES CHANGE | |||
Y | SEPARATE ILLUSTRATION |
#UEG0688S0035
2P-6530: COVER GP-CYLINDER HEAD
2P6530 CYLINDER HEAD COVER GROUP
Part of 3N3209 Basic Engine Arrangement listed on Page 16
Part of 3N3209 Basic Engine Arrangement listed on Page 16
#UEG0688S0036
3N-2892: CYLINDER HEAD FASTENER GROUP
3N2892 CYLINDER HEAD FASTENER GROUP
Part of 3N3209 Basic Engine Arrangement listed on Page 16
Part of 3N3209 Basic Engine Arrangement listed on Page 16
#UEG0688S0037
2P-6546: FASTENER GP-CYLINDER HEAD
2P6546 CYLINDER HEAD FASTENER GROUP
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SIS#UEG0688S0038
2P-6526: VALVE-MECHANISM GP
2P6526 VALVE MECHANISM GROUP
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9S-9203 | [1] | SHAFT ASSEM. | |
0L-1026 | [2] | PLUG (.50 in. Diameter) | ||
2. | 5S-5879 | [1] | BRACKET | |
5M-4606 | [1] | DOWEL | ||
3. | 4B-4910 | [5] | SPRING | |
4. | 9H-1110 | [12] | WASHER | |
5. | 5S-5879 C | [4] | BRACKET | |
6. | 5S-6855 | [6] | ARM ASSEM. (Exhaust) | |
7. | 5S-6854 | [6] | ARM ASSEM. (Intake) | |
8. | 8S-1499 | [1] | BRACKET ASSEM. | |
3F-6795 | [1] | DOWEL | ||
9. | 9M-9886 | [2] | WASHER | |
9H-1112 | [2] | SPRING | ||
10. | 1B-4203 | [12] | NUT | |
11. | 5S-5917 C | [12] | SCREW | |
12. | 5S-5918 | [12] | ROD | |
13. | 7S-3161 | [12] | LIFTER | |
14. | 9H-1113 | [2] | RING | |
C | INDICATES CHANGE |
#UEG0688S0039
3N-2891: COVER GP-VALVE MECHANISM
3N2891 VALVE MECHANISM COVER GROUP
Part of 3N3209 Basic Engine Arrangement listed on Page 16
Only separate parts serviced
Part of 3N3209 Basic Engine Arrangement listed on Page 16
Only separate parts serviced
Parts for your 3306 INDUSTRIAL ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | [1] | COVER ASSEM. | ||
2. | [15] | BOLT | ||
[15] | LOCKWASHER | |||
3. | [1] | GASKET |
Information:
BASIC ENGINE
PISTON & ROD GP
Engine News
New Piston Groups Have The Piston Pin Bore Off-Center, Away From The Thrust Side Of The Piston
1980/02/27
1980/02/27
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Specifications
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Service Magazine
New Piston Groups Have The Piston Pin Bore Off-Center, Away From The Thrust Side Of The Piston{1214}
1980/01/21
1980/01/21
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
1980/06/09
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
1982/08/09
New Connecting Rod And Main Bearings Have Thicker Layer Of Surface Material{1230,1203,1219}
1982/10/04
1982/10/04
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
1978/04/17
Caterpillar Parts SIS Catalog 3306 :
Truck sale:
9,775
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
35,500
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
- Stationary Generator Sets
RING POWER CORP.
8,185
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
41,500
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
35,000
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC