950 WHEEL LOADER 31K01201-01485 (MACHINE) WORK TOOLS Caterpillar SIS

WHEEL LOADER 950 WHEEL LOADER 31K
950 WHEEL LOADER 31K01201-01485 (MACHINE) UEG0690S 950 31K (1968)

Parts group 950:

For full view, you need register

WORK TOOLS

BUCKET GP

8K9043 GENERAL PURPOSE BUCKET ASSEMBLY--3.50 Cubic Yard--104" Wide
Only separate parts serviced. When complete Assembly is required order 9K8288
AN ATTACHMENT

9K-8288 BUCKET GP-GENERAL PURPOSE

9K8288 GENERAL PURPOSE BUCKET GROUP--3.50 Cubic Yard--105.75" Wide--Type 1
AN ATTACHMENT

9K-8288 BUCKET GP-GENERAL PURPOSE

9K8288 GENERAL PURPOSE BUCKET GROUP--2.68 Cubic Meters (3.5 Cubic Yards)--2686 mm (105.75 in.) Wide--Type 2
Replaced by 5V7268 Bucket Group shown on Page 160A. AN ATTACHMENT

5V-7268 BUCKET GP-GENERAL PURPOSE

5V7268 GENERAL PURPOSE BUCKET GROUP--2.68 Cubic Meters (3.5 Cubic Yards) 2623 mm (103.25 in.) Wide
AN ATTACHMENT

9K-8742 GENERAL PURPOSE BUCKET GROUP

9K8742 GENERAL PURPOSE BUCKET GROUP--3.50 Cubic Yard--105.75" Wide
Only separate parts serviced. AN ATTACHMENT

9K-8740 GENERAL PURPOSE BUCKET GROUP

9K8740 GENERAL PURPOSE BUCKET GROUP--3.00 Cubic Yard--105.75" Wide
Tip parts are shown on Page 172-2
AN ATTACHMENT

9K-8746 GENERAL PURPOSE BUCKET GROUP

9K8746 GENERAL PURPOSE BUCKET GROUP--3.00 Cubic Yard--105.75" Wide
Only separate parts serviced. When complete group is required order 9K8740 shown on Page 160B-1
AN ATTACHMENT

9K-8732 GENERAL PURPOSE BUCKET ASSEMBLY

9K8732 GENERAL PURPOSE BUCKET ASSEMBLY--2.50 Cubic Yard--96" Wide
Part of 9K8745 General Purpose Bucket Group shown on Page 164A

8K-9039 BUCKET ASSEMBLY

8K9039 BUCKET ASSEMBLY--2.25 Cubic Yard--96" Wide
Only separate parts serviced. When complete Assembly is required order 9K8306
Bucket Assembly shown on Page 161. AN ATTACHMENT

9K-8306 BUCKET GP-GENERAL PURPOSE

9K8306 BUCKET ASSEMBLY--2.50 Cubic Yard--96" Wide--Type 1
AN ATTACHMENT

9K-8306 BUCKET GP-GENERAL PURPOSE

9K8306 BUCKET ASSEMBLY--1.91 Cubic Meters (2.5 Cubic Yard)--2438 mm (96 in.) Wide--Type 2
Replaced by 5V7264 shown on Page 161B. AN ATTACHMENT

5V-7264 BUCKET GP-GENERAL PURPOSE

5V7264 GENERAL PURPOSE BUCKET GROUP--1.91 Cubic Meters (2.5 Cubic Yard)--2419 mm (95.25 in.) Wide
AN ATTACHMENT

8K-9042 BUCKET ASSEMBLY

8K9042 BUCKET ASSEMBLY--2.75 Cubic Yard--104" Wide
Only separate parts serviced. When complete Assembly is required order 9K8297

9K-8297 BUCKET GP-GENERAL PURPOSE

9K8297 BUCKET ASSEMBLY--3 Cubic Yard--105.75" Wide--Type 1
AN ATTACHMENT

9K-8297 BUCKET GP-GENERAL PURPOSE

9K8297 BUCKET ASSEMBLY--2.29 Cubic Meter (3.0 Cubic Yard)--2686 mm (105.75 in.) Wide--Type 2
Replaced by 5V7266 Shown on Page 162C
AN ATTACHMENT

5V-7266 BUCKET GP-GENERAL PURPOSE

5V7266 BUCKET ASSEMBLY--2.29 Cubic Meter (3.0 Cubic Yard)--2623 mm (103.25 in.) Wide
AN ATTACHMENT

5K-3227 MULTI-PURPOSE BUCKET GROUP

5K3227 MULTI-PURPOSE BUCKET GROUP--Type 1
Part of 7K1422 Multi-Purpose Bucket Arrangement listed on Page 165
AN ATTACHMENT

5K-3227 MULTI-PURPOSE BUCKET GROUP

5K3227 MULTI-PURPOSE BUCKET GROUP--Type 2
Part of 7K1422 Multi-Purpose Bucket Arrangement listed on Page 165
AN ATTACHMENT

2V-3160 MULTI-PURPOSE BUCKET GROUP

2V3160 MULTI-PURPOSE BUCKET GROUP--1.91 Cubic Meter (2.50 Cubic Yard)--2686 mm (105.75 in.) Wide
Replaced by 5V7273 Multi-Purpose Bucket Group shown on Page 163D. Part of 1V9785 Multi-Purpose Bucket Arrangement
listed on Page 164B. AN ATTACHMENT

5V-7273 MULTI-PURPOSE BUCKET GROUP

5V7273 MULTI-PURPOSE BUCKET GROUP--1.91 Cubic Meter (2.5 Cubic Yard)--2648 mm (104.25 in.) Wide
Part of 5V7272 Multi-Purpose Bucket Arrangement listed on Page 164C
AN ATTACHMENT

5K-3283 BUCKET & SUP GP

5K3283 BUCKET AND SUPPORT GROUP
Part of 5K1612 Side Dump Bucket Arrangement listed on Page 165
AN ATTACHMENT

9K-8745 GENERAL PURPOSE BUCKET GROUP

9K8745 GENERAL PURPOSE BUCKET GROUP
2.50 Cubic Yard--96" Wide
Only separate parts serviced

9K-6491 SIDE DUMP BUCKET ARRANGEMENT

9K6491 SIDE DUMP BUCKET ARRANGEMENT
FOR USE WITH SIDE COUNTERWEIGHT
AN ATTACHMENT

1V-9785 MULTI-PURPOSE BUCKET ARRANGEMENT

1V9785 MULTI-PURPOSE BUCKET ARRANGEMENT
Replaced by 5V7272 Multi-Purpose Bucket Arrangement listed on
Page 164C. AN ATTACHMENT

5V-7272 MULTI-PURPOSE BUCKET ARRANGEMENT

5V7272 MULTI-PURPOSE BUCKET ARRANGEMENT
AN ATTACHMENT

7K-1422 MULTI-PURPOSE BUCKET ARRANGEMENT

7K1422 MULTI-PURPOSE BUCKET ARRANGEMENT--Replaced by 1V9785 listed
on Page 164B
AN ATTACHMENT

5K-1612 SIDE DUMP BUCKET ARRANGEMENT

5K1612 SIDE DUMP BUCKET ARRANGEMENT--Replaced by 9K6491 shown on
Page 164B
FOR USE WITH SIDE COUNTERWEIGHT

9K-6495 BUCKET GP-SIDE DUMP

9K6495 SIDE DUMP BUCKET GROUP
Part of 9K6491 Side Dump Bucket Arrangement listed on Page 164B
AN ATTACHMENT

FELLER BUNCHER AR

5K-2001 FRAME AND CLAMP GROUP

5K2001 FRAME AND CLAMP GROUP--Side View
Part of Top Clamp Arrangement listed on Page 175

GROUND ENGAGING TOOLS (G.E.T.)

5K-1613 TOOTH GROUP

5K1613 TOOTH GROUP--Short Tip
FOR USE WITH MULTI-PURPOSE BUCKET ARRANGEMENT

1U-0629 TOOTH GP-LONG

1U629 TOOTH GROUP--Long Tip
FOR USE WITH 5V7268, 5V7264 AND 5V7266 BUCKET GROUPS SHOWN ON
PAGES 160A, 161B & 162C AND 5V7272 BUCKET ARRANGEMENT LISTED ON
PAGE 164C. AN ATTACHMENT

1U-0630 TOOTH GP-SHORT

1U630 TOOTH GROUP--Short Tip
FOR USE WITH 5V7268, 5V7264 & 5V7266 BUCKET GROUPS SHOWN ON PAGES
160A, 161B & 162C AND 5V7272 BUCKET ARRANGEMENT LISTED ON
PAGE 164C. AN ATTACHMENT

8J-2975 TOOTH GROUP

8J2975 TOOTH GROUP--Short Tip
FOR USE WITH 8K9043 & 8K9042 BUCKET ASSEMBLIES SHOWN ON PAGES 160 &
162. Only separate parts serviced. When complete group is required, order ten (10)
8J6589 shown on Page 172-2

8J-2973 TOOTH GROUP

8J2973 TOOTH GROUP--Long Tip
FOR USE WITH 8K9039 BUCKET ASSEMBLY SHOWN ON PAGE 161. Only separate
parts serviced. When complete Group is required order nine (9) 8J6588 shown on
Page 172-1. AN ATTACHMENT

8J-2974 TOOTH GROUP

8J2974 TOOTH GROUP--Long Tip
FOR USE WITH 8K9043 & 8K9042 BUCKET ASSEMBLIES SHOWN ON PAGES 160 &
162. Only separate parts serviced. When complete group is required, order ten (10)
8J6588 shown on Page 172-1. AN ATTACHMENT

8J-1434 TOOTH GP-SCARIFIER

8J1434 TOOTH GROUP--Type 1
Also part of 5K1481 Ripper-Scarifier Group shown on Page 168

8J-1434 TOOTH GP-SCARIFIER

8J1434 TOOTH GROUP--Type 2
Also part of 5K1481 Ripper-Scarifier Group shown on Page 168

8J-6588 TOOTH GROUP

8J6588 TOOTH GROUP--Long Tip
FOR USE WITH 8K9043, 8K9039 and 8K9042 BUCKET ASSEMBLIES SHOWN
ON PAGES 160, 160E and 162. Tip parts are shown on Page 172-2

9J-3167 TIP GP-LONG

TIP GROUP (9J3167)--Long
Part of 9K8740 General Purpose Bucket and 8J6588 Tooth Groups shown on
Pages 160B-1 and 172-1

8J-6589 TOOTH GROUP

8J6589 TOOTH GROUP--Short Tip
FOR USE WITH 8K9043 AND 8K9039 BUCKET ASSEMBLIES SHOWN ON
PAGES 160 AND 160E. AN ATTACHMENT

8J-7748 CUTTING EDGE GROUP

8J7748 CUTTING EDGE GROUP--Field Installation
Replaced by 1U1463 Cutting Edge Group shown on Page 172C
PROVIDES BOLT-ON CUTTING EDGE
FOR USE WITH 8K9039 BUCKET ASSEMBLY SHOWN ON PAGE 160E

8J-7751 CUTTING EDGE GROUP

8J7751 CUTTING EDGE GROUP--Factory Installation
PROVIDES BOLT-ON CUTTING EDGE. FOR USE WITH 8K9043, 9K8288,
9K8306, 8K9042 AND 9K8297 BUCKET ASSEMBLIES SHOWN ON PAGES
160, 160A, 161, 162 AND 162A. AN ATTACHMENT

8J-9084 CUTTING EDGE GROUP

8J9084 CUTTING EDGE GROUP
Replaced by 1U1463 Cutting Edge Group shown on Page 172C. PROVIDES
BOLT-ON CUTTING EDGE. FOR USE WITH GENERAL PURPOSE BUCKET
ASSEMBLIES, 8J4254 WELD-ON ADAPTERS AND 8K8161 CUTTING EDGE
AN ATTACHMENT

8J-9085 CUTTING EDGE GROUP

8J9085 CUTTING EDGE GROUP
PROVIDES BOLT-ON CUTTING EDGE. FOR USE WITH 8K9042, 8K9043 BUCKET
ASSEMBLIES AND 8K8162 CUTTING EDGE. AN ATTACHMENT

8J-8141 CUTTING EDGE

8J8141 CUTTING EDGE--Half Arrow--Field Installation
Provides bulk length Half Arrow Cutting Edge stock for Bucket rebuilding
Refer to Buckets for quantity used

1U-1463 CUTTING EDGE GROUP

1U1463 CUTTING EDGE GROUP
PROVIDES BOLT-ON CUTTING EDGE. FOR USE WITH GENERAL
PURPOSE BUCKET ASSEMBLIES AND 8K8161 CUTTING EDGE
AN ATTACHMENT

1U-1930 BIT AND CUTTING EDGE GROUP

1U1930 BIT AND CUTTING EDGE GROUP
FOR USE WITH 5V7268 AND 5V7266 BUCKET GROUPS SHOWN ON PAGES
160A AND 162C. AN ATTACHMENT

1U-1931 BIT AND CUTTING EDGE GROUP

1U1931 BIT AND CUTTING EDGE GROUP
FOR USE WITH 5V7272 BUCKET ARRANGEMENT LISTED ON PAGE 164C
AN ATTACHMENT

1U-1932 BIT AND CUTTING EDGE GROUP

1U1932 BIT AND CUTTING EDGE GROUP
FOR USE WITH 5V7264 BUCKET GROUP SHOWN ON PAGE 161B
AN ATTACHMENT

7K-3917 CUTTING EDGE GROUP

7K3917 CUTTING EDGE GROUP--Field Installation
Provides Bolt-On Cutting Edge for 96" Wide Bucket Assemblies

7K-3918 CUTTING EDGE GROUP

7K3918 CUTTING EDGE GROUP--Field Installation
Provides Bolt-On Cutting Edge for 104" Wide Bucket Assemblies

RIPPER GP

5K-1618 950 RIPPER-SCARIFIER ARRANGEMENT

5K1618 950 RIPPER-SCARIFIER ARRANGEMENT
AN ATTACHMENT

5K-1481 RIPPER-SCARIFIER GROUP

5K1481 RIPPER-SCARIFIER GROUP
Part of 5K1618 Arrangement listed on Page 167. 8J1434 Tooth parts are shown on Page 172
Note: One or Two 8J1434 Tooth Groups may be added to convert to a Four or Five Tooth Ripper

5K-2891 RIPPER MOUNTING GROUP

5K2891 RIPPER MOUNTING GROUP
Part of 5K1618 Arrangement listed on Page 167
AN ATTACHMENT

Information:

(For parts list, see above)

WORK TOOLS

BUCKET GP

Special Instruction

Installation of Parts Service Bucket Lift Pin Bosses{6109}
Installation of Parts Service Bucket Lift Pin Bosses{6109}

Installation Of Bucket Hinge Pin Bearing Bosses{6119}
Installation Of Bucket Hinge Pin Bearing Bosses{6119}

Inspection of Slag Buckets{6110}
Inspection of Slag Buckets{6110}

Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}

Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}

Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}

Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}

Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}

Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat^® Advansys Tips {0751, 6001, 6800, 6805}

Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat^® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}

Specifications

Bucket Positioner
950 WHEEL LOADER

Tool Operating Manual

Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}

Disassembly and Assembly

Bucket
950 WHEEL LOADER VEHICLE SYSTEMS

Bucket Positioner
950 WHEEL LOADER VEHICLE SYSTEMS

Bucket Positioner Master Cylinder
950 WHEEL LOADER VEHICLE SYSTEMS

Lift Arms And Bucket
950 WHEEL LOADER VEHICLE SYSTEMS

Service Magazine

New Bucket Cutting Edges Give Longer Service Life And Improved Penetration (Cutting Ability){6801}
1981/11/16

New Pins Available For Use In Bucket Linkage{6108,6126}
1982/10/11

Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30

Special Instruction Form Explains Weld Repair Of Bucket Corners For Corner Guard Systems{6802,6816}
1984/06/04

Replacement Tip Or Boss Assemblies Are Available For The Ends Of Bucket Lift Arms{6119}
1978/01/09

Stronger Link Assembly For Bucket Control Group; Longer Grease Fittings Make Lubrication Easier{6107}
1978/01/16

Changing Over to New Two-Bolt Corner Guard System{6800,6802,6803}
1993/11/09

Revised Special Instruction, SEHS8433-04, "Repair Of Wheel And Track Loader Lift Arms And Levers" Available {0374,6107,6116,6119}
1998/12/07

Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

Wheel Loader Bucket Lifting Point Color Change {6001, 6101, 6102, 6104, 6110, 6131, 6132, 6529, 6531, 6704}
2011/02/24

COUPLER GP-QUICK

Technical Information Bulletin

Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}

FELLER BUNCHER AR

Service Magazine

New Brake System Has Larger, Stronger Caliper Heads With Improved Pistons And More Lining Surface Area{4250,7000}
1980/01/21

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

GROUND ENGAGING TOOLS (G.E.T.)

Special Instruction

Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}
Installation Of Flush Mounted (*FM), Bottom Strap (**BS) And Flush Mounted Corner Tooth Adapters{6803}

Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}
Installation Of Improved Cutting Edge Replacement Parts{6100, 6800}

Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}

Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}

Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System

Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}

398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}

Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}

Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}

Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat^® Advansys Tips {0751, 6001, 6800, 6805}

Tool Operating Manual

Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Reuse And Salvage Guidelines

Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}

Service Magazine

6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23

New Bucket Cutting Edges Give Longer Service Life And Improved Penetration (Cutting Ability){6801}
1981/11/16

Bucket End Bits Are Thicker Than Bucket Center Edges{6804}
1983/05/30

Procedure To Install Weld-On Half Arrow Cutting Edges{6800,6801,6805}
1984/10/08

Changing Over to New Two-Bolt Corner Guard System{6800,6802,6803}
1993/11/09

The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23

Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16

Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01

Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}

WINCH GP

Special Instruction

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

TOOLS

Tool Operating Manual

Service Magazine

Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16

COLLECTOR AR-TREE

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Truck sale:

Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT

385,000

Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY

454,718

Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY

167,802

Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.

166,716

Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.