ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGPOWER TRAIN
TRANSMISSION GPELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING#UEG0690S0070
5S-9088: ALTERNATOR GP-CHARGING
5S9088 ALTERNATOR ASSEMBLY--Part 2 of 2--Type 1
Part of 9S6693 Alternator Group listed on Page 42
AN ATTACHMENT
Part of 9S6693 Alternator Group listed on Page 42
AN ATTACHMENT
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-2242 | [1] | RACE | |
| 2. | 9S-2248 | [1] | FIELD COIL AND SUPPORT ASSEM. | |
| 3. | 9S-2004 | [1] | STATOR ASSEM. | |
| 4. | 9S-2006 | [1] | INSULATOR | |
| 5. | 9S-2005 | [1] | GROMMET | |
| 6. | 9S-2014 | [3] | CLIP | |
| 7. | 9S-2302 | [1] | ROTOR ASSEM. | |
| 8. | 9S-2390 | [1] | RETAINER ASSEM. | |
| 9. | 9S-2391 | [1] | SEAL | |
| 10. | 9S-2256 | [1] | GASKET | |
| 11. | 9S-2261 | [1] | COLLAR | |
| 12. | 2F-5721 | [1] | BEARING | |
| 13. | 2P-5616 | [1] | FRAME | |
| 14. | 3B-4502 | [4] | LOCKWASHER | |
| 15. | 9S-2009 | [4] | BOLT | |
| 16. | 9S-2391 | [1] | SEAL | |
| 17. | 9S-2254 | [1] | COLLAR | |
| 18. | 9S-2252 | [1] | SLINGER | |
| 19. | 9S-2008 | [4] | SCREW | |
| 20. | 9S-2258 | [1] | FAN AND BAFFLE ASSEM. | |
| 21. | 7F-7621 | [1] | WASHER | |
| 22. | 2K-4821 | [1] | LOCKNUT |
#UEG0690S0071
5S-9088: ALTERNATOR GP-CHARGING
5S9088 ALTERNATOR ASSEMBLY--24 Volt, 50 Ampere--Type 2
Part of 9S6693 Alternator Group listed on Page 42
Part of 9S6693 Alternator Group listed on Page 42
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS#UEG0690S0072
9G-9538: ALTERNATOR GP-CHARGING
9G9538 ALTERNATOR GROUP--Robert Bosch--24 Volt, 50 Ampere
Part of 5S9088 Alternator Assembly listed on Page 41A
Part of 5S9088 Alternator Assembly listed on Page 41A
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-7551 | [1] | BEARING | |
| 2. | 9G-7548 | [1] | RING | |
| 3. | 3T-1885 | [1] | COIL ASSEM. | |
| 4. | 9G-7560 | [1] | ROTOR ASSEM. | |
| 5. | 9G-7553 | [1] | RING | |
| 6. | 9G-7562 | [1] | COVER ASSEM. | |
| 7. | 9G-7567 | [1] | REGULATOR ASSEM. | |
| 8. | 9G-7552 | [1] | BEARING | |
| 9. | 9G-7557 | [1] | SCREW ASSEM. | |
| 10. | 9G-7568 | [1] | FRAME ASSEM. | |
| 11. | 3T-1887 | [1] | DIODE ASSEM. | |
| 12. | 3T-1886 | [1] | STATOR ASSEM. | |
| 13. | 9G-7566 | [1] | FRAME | |
| 14. | 9G-7564 | [1] | FAN | |
| 15. | 9G-7549 | [1] | SPACER | |
| 16. | 2K-4821 | [1] | LOCKNUT | |
| [1] | WASHER | |||
| THE FOLLOWING REPAIR KITS ARE AVAILABLE: | ||||
| 9G-7554 | [1] | KIT (ground terminal) | ||
| (Includes nuts & lockwashers) | ||||
| 9G-7555 | [1] | KIT (output terminal) | ||
| (Includes nuts, washers & bushings) | ||||
| 9G-7556 | [1] | KIT (capacitor) | ||
| (Includes capacitor, screw, lockwasher & washer) | ||||
| 9G-7559 | [1] | KIT (relay terminal) | ||
| (Includes splice, tube, nut, terminal, lockwasher, washers, and bushing) | ||||
| 9G-7565 | [1] | KIT (regulator terminal) | ||
| (Includes nuts, lockwashers, washers and bushing) | ||||
#UEG0690S0073
3T-1888: ALTERNATOR GP-CHARGING
3T1888 ALTERNATOR GROUP--Delco-Remy--24 Volt, 50 Ampere--Part 1 of 2
Part of 5S9088 Alternator Assembly listed on Page 41A
Part of 5S9088 Alternator Assembly listed on Page 41A
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-2260 | [1] | PLATE | |
| 2. | 9S-2544 | [4] | SCREW | |
| 3. | 8H-0878 | [6] | LOCKWASHER | |
| 4. | 9S-2438 | [2] | SCREW | |
| 5. | 7H-2079 | [7] | LOCKWASHER | |
| 6. | 095-2255 | [1] | COVER | |
| 7. | 9S-2262 | [1] | GASKET | |
| 8. | 9S-2246 | [1] | LEAD ASSEM. | |
| 9. | 9S-9830 | [6] | SCREW | |
| 10. | 8F-1326 | [3] | WASHER | |
| 11. | 9B-7233 | [3] | LOCKWASHER (shake proof) | |
| 12. | 9S-9829 | [1] | SCREW ASSEM. | |
| 13. | 4B-2043 | [4] | NUT | |
| 14. | 7N-0129 | [1] | REGULATOR ASSEM. | |
| 15. | 9S-2250 | [1] | GROMMET | |
| 16. | 9S-2542 | [1] | SCREW | |
| 17. | 9S-2437 | [5] | SCREW | |
| 18. | 9S-2389 | [1] | STUD ASSEM. | |
| 19. | 7N-0174 | [1] | HOUSING ASSEM. | |
| (Includes) | ||||
| 20. | 9N-0943 | [1] | PLUG | |
| 21. | 5P-3418 | [1] | BEARING | |
| 22. | 9S-2396 | [1] | BUSHING | |
| 23. | 9S-2292 | [1] | HEAT SINK ASSEM. | |
| 24. | 9S-2300 | [4] | INSULATOR | |
| 25. | 9S-2247 | [4] | WASHER (spring) | |
| 4B-4863 | [4] | WASHER (plain) | ||
| 26. | 9S-2007 | [3] | SCREW | |
| 27. | 9S-2301 | [1] | INSULATION | |
| 28. | 9S-2011 | [1] | SCREW | |
| 1L-4789 | [1] | LOCKWASHER | ||
| THE FOLLOWING REPAIR KITS ARE AVAILABLE: | ||||
| 9S-2013 | [1] | KIT (terminal relay) | ||
| (Consists of Bushing, "O" Ring and Hardware) | ||||
| 9S-2012 | [1] | KIT (terminal output) | ||
| (Consists of Gaskets, Terminal and Hardware) | ||||
| 9S-2290 | [3] | KIT (heat sink) | ||
| (Diode Junction Hardware) | ||||
| 9S-2291 | [3] | KIT (heat sink) | ||
| Positive Diode Hardware | ||||
#UEG0690S0074
3T-1888: ALTERNATOR GP-CHARGING
3T1888 ALTERNATOR GROUP--Delco-Remy--24 Volt, 50 Ampere--Part 2 of 2
Part of 5S9088 Alternator Assembly listed on Page 41A
Part of 5S9088 Alternator Assembly listed on Page 41A
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-3419 | [1] | RACE | |
| 2. | 9S-2248 | [1] | FIELD COIL AND SUPPORT ASSEM. | |
| 3. | 9S-2004 | [1] | STATOR ASSEM. | |
| (Includes) | ||||
| 4. | 9S-2006 | [1] | INSULATOR | |
| 5. | 9S-2005 | [1] | GROMMET | |
| 6. | 9S-2014 | [3] | CLIP | |
| 7. | 9S-2302 | [1] | ROTOR ASSEM. | |
| 8. | 9S-2390 | [1] | RETAINER ASSEM. | |
| (Includes) | ||||
| 9. | 9S-2391 | [1] | SEAL | |
| 10. | 9S-2256 | [1] | GASKET | |
| 11. | 9S-2261 | [1] | COLLAR | |
| 12. | 2F-5721 | [1] | BEARING | |
| 13. | 2P-5616 | [1] | FRAME | |
| 14. | 3B-4502 | [4] | LOCKWASHER | |
| 15. | 9S-2009 | [4] | SCREW | |
| 16. | 9S-2391 | [1] | SEAL | |
| 17. | 9S-2254 | [1] | COLLAR | |
| 18. | 9S-2252 | [1] | SLINGER | |
| 19. | 9S-2008 | [4] | SCREW | |
| 20. | 9S-2258 | [1] | FAN AND BAFFLE ASSEM. | |
| 21. | 7F-7621 | [1] | WASHER | |
| 22. | 2K-4821 | [1] | LOCKNUT | |
#UEG0690S0075
9D-1460: ALTERNATOR AR
9D1460 ALTERNATOR ARRANGEMENT--24 Volt, 50 Ampere
FACTORY INSTALLATION
FACTORY INSTALLATION
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS#UEG0690S0076
9S-6693: ALTERNATOR GP-CHARGING
9S6693 ALTERNATOR GROUP--24 Volt, 50 Ampere
Part of 9D1460 Alternator Arrangement
Part of 9D1460 Alternator Arrangement
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS#UEG0690S0077
1P-5254: POWER SHIFT TRANSMISSION ARRANGEMENT
1P5254 POWER SHIFT TRANSMISSION ARRANGEMENT--Part 1 of 2
Serial No. 81J5411 to 81J5676 inclusive and 31K1201 to 31K1234 inclusive
Transmission, Magnetic Screen and 7S4629 Pump parts
are shown on Pages 46 and 47
Serial No. 81J5411 to 81J5676 inclusive and 31K1201 to 31K1234 inclusive
Transmission, Magnetic Screen and 7S4629 Pump parts
are shown on Pages 46 and 47
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Y | [1] | MAGNETIC SCREEN | |
| (Separate Illustration) | ||||
| 2. | 7S-4629 Y | [1] | PUMP GROUP | |
| (Separate Illustration) | ||||
| 3. | Y | [1] | TRANSMISSION | |
| (Separate Illustration) | ||||
| 4. | 0S-1587 H | [2] | BOLT | |
| 5. | 3B-4508 H | [2] | LOCKWASHER | |
| 6. | 6K-2857 H | [1] | TUBE ASSEM. | |
| 7. | 5M-8429 H | [1] | CLIP | |
| 8. | 6K-2362 H | [1] | PLUNGER ASSEM. | |
| 9. | 5K-0376 H | [2] | CLAMP | |
| 10. | 5K-1568 H | [1] | CAP | |
| 11. | 7B-6368 H | [1] | BALL | |
| 12. | 6H-5139 H | [1] | PLATE | |
| 13. | 6F-5188 H | [1] | GASKET | |
| 7S-4649 | [1] | COVERS GROUP (Not Shown) | ||
| (Includes such parts as Covers, Gaskets and Hardware) | ||||
| 14. | 0L-1351 H | [2] | BOLT | |
| 15. | 1D-4717 H | [2] | NUT | |
| 16. | 3B-4506 H | [16] | LOCKWASHER | |
| 17. | 6K-2350 H | [1] | TUBE ASSEM. | |
| 18. | 1H-9696 H | [1] | SEAL | |
| 19. | 0S-1591 H | [2] | BOLT | |
| 20. | 4K-5537 H | [1] | GASKET | |
| 21. | 0L-1178 H | [8] | BOLT | |
| 22. | 3B-4512 H | [8] | LOCKWASHER | |
| 23. | 7K-8461 CH | [2] | SUPPORT ASSEM. | |
| 24. | 1A-2029 H | [12] | BOLT | |
| 25. | 5H-3252 | [1] | SEAL | |
| 26. | 8M-5249 | [2] | SEAL | |
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
| H | NOT PART OF 1P5254 POWER SHIFT | |||
#UEG0690S0078
1P-5254: POWER SHIFT TRANSMISSION ARRANGEMENT
1P5254 POWER SHIFT TRANSMISSION ARRANGEMENT--Part 2 of 2
Serial No. 81J5411 to 81J5676 inclusive and 31K1201 to 31K1234 inclusive
Torque Converter and 2S6457 Filter parts are shown on Pages 48 and 57
9S1059 Gasket Kit is available
Serial No. 81J5411 to 81J5676 inclusive and 31K1201 to 31K1234 inclusive
Torque Converter and 2S6457 Filter parts are shown on Pages 48 and 57
9S1059 Gasket Kit is available
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-4205 | [4] | NUT | |
| 2. | 3B-4508 | [11] | LOCKWASHER | |
| 3. | 8M-4443 | [2] | SEAL | |
| 4. | 2S-6457 Y | [1] | FILTER GROUP | |
| (Separate Illustration) | ||||
| 5. | 5S-4355 | [1] | MANIFOLD ASSEM. | |
| 6. | 4H-9304 C | [4] | STUD | |
| 7. | 7B-3235 | [3] | BOLT | |
| 8. | 8M-5254 | [1] | SEAL | |
| 9. | 8M-5248 | [1] | SEAL | |
| 10. | 8M-5010 | [3] | SEAL | |
| 11. | 0S-1588 | [2] | BOLT | |
| 12. | 3B-4506 | [6] | LOCKWASHER | |
| 13. | 4B-4278 | [2] | WASHER | |
| 14. | 5H-3252 | [1] | SEAL | |
| 15. | 8M-5661 | [1] | SEAL | |
| 16. | 1D-4717 | [2] | NUT | |
| 17. | 2B-2006 | [4] | BOLT | |
| 18. | 8M-4992 | [1] | SEAL | |
| 19. | 5M-7927 | [1] | ADAPTER ASSEM. | |
| 20. | [1] | DOWEL | ||
| 21. | 3F-0957 | [1] | DOWEL | |
| 22. | 8S-6379 | [1] | TUBE ASSEM. | |
| 23. | 0S-1571 | [2] | BOLT | |
| 24. | Y | [1] | TORQUE CONVERTER | |
| (Separate Illustration) | ||||
| 25. | 8M-4432 | [2] | SEAL | |
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
#UEG0690S0079
1P-5254: POWER SHIFT TRANSMISSION ARRANGEMENT
1P5254 POWER SHIFT TRANSMISSION ARRANGEMENT--Part 1 of 2
Serial No. 81J5677 to 81J6132 inclusive and 31K1235 to 31K1284 inclusive
Transmission, Magnetic Screen and 7S4629 Pump parts
are shown on Pages 46, 46A and 47
Serial No. 81J5677 to 81J6132 inclusive and 31K1235 to 31K1284 inclusive
Transmission, Magnetic Screen and 7S4629 Pump parts
are shown on Pages 46, 46A and 47
Parts for your 950 WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Y | [1] | MAGNETIC SCREEN | |
| (Separate Illustration) | ||||
| 2. | 7S-4629 Y | [1] | PUMP GROUP | |
| (Separate Illustration) | ||||
| 3. | Y | [1] | TRANSMISSION | |
| (Separate Illustration) | ||||
| 4. | 0S-1587 H | [2] | BOLT | |
| 5. | 3B-4508 H | [2] | LOCKWASHER | |
| 6. | 6K-2857 H | [1] | TUBE ASSEM. | |
| 7. | 5M-8429 H | [1] | CLIP | |
| 8. | 6K-2362 H | [1] | PLUNGER ASSEM. | |
| 9. | 5K-0376 H | [2] | CLAMP | |
| 10. | 5K-1568 H | [1] | CAP | |
| 11. | 7B-6368 H | [1] | BALL | |
| 12. | 6H-5139 H | [1] | PLATE | |
| 13. | 6F-5188 H | [1] | GASKET | |
| 7S-4649 | [1] | COVERS GROUP (Not Shown) | ||
| (Includes such parts as Covers, Gaskets and Hardware) | ||||
| 14. | 0L-1351 H | [2] | BOLT | |
| 15. | 1D-4717 H | [2] | NUT | |
| 16. | 3B-4506 H | [16] | LOCKWASHER | |
| 17. | 6K-2350 H | [1] | TUBE ASSEM. | |
| 18. | 1H-9696 H | [1] | SEAL | |
| 19. | 0S-1591 H | [2] | BOLT | |
| 20. | 4K-5537 H | [1] | GASKET | |
| 21. | 0L-1178 H | [8] | BOLT | |
| 22. | 3B-4512 H | [8] | LOCKWASHER | |
| 23. | 6K-2503 CH | [2] | FLANGE | |
| 24. | 1A-2029 H | [12] | BOLT | |
| 25. | 5H-3252 | [1] | SEAL | |
| 26. | 8M-5249 | [2] | SEAL | |
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
| H | NOT PART OF 1P5254 POWER SHIFT | |||
Information:
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Troubleshooting
Disassembly and Assembly
Service Magazine
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
1987/05/04
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}

