AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

NO. 14E MOTOR GRADER 12K02199-UP (MACHINE) HYDRAULIC SYSTEM Caterpillar SIS



MOTOR GRADER 14E MOTOR GRADER 12K
 NO. 14E MOTOR GRADER 12K02199-UP (MACHINE) UEG0702S 14E 12K   (1967)

Parts group 14E:

  For full view, you need register
HYDRAULIC SYSTEM
ACCUMULATOR GP
ACCUMULATOR GROUP
7D-3476 ACCUMULATOR GROUP
7D3476 ACCUMULATOR GROUP
Part of 7D8850 & 8D9640 Parking Brake Control Groups
shown on Pages 75 and 78
ACCUMULATOR GROUP
6J-6041 ACCUMULATOR GROUP
6J6041 ACCUMULATOR GROUP
Part of 6D5780 Rear Valve and Lines Group shown on Page 108
CENTERSHIFT GP
CENTERSHIFT
5D-8100 CENTERSHIFT
CENTERSHIFT (5D8100 N/S)
Centershift Mechanism parts are shown on Pages 100 and 101
CENTERSHIFT MECHANISM
CENTERSHIFT MECHANISM
CENTERSHIFT MECHANISM-Top View-Part 1 of 2
Part of Centershift shown on Page 99
CENTERSHIFT MECHANISM
CENTERSHIFT MECHANISM--As Viewed from L.H. Side of Machine-Part 2 of 2
Part of Centershift shown on Page 99
CONTROL GP-POWER
POWER CONTROL OUTPUT SHAFT
6D-3950 POWER CONTROL OUTPUT SHAFT
POWER CONTROL OUTPUT SHAFT (6D3950 N/S)
8D1502, 6D3414, 8D1501, 8D1563, 7D6842 and 8D1567 Joint parts are shown on
Pages 98, 128, 142, 144 and 145
POWER CONTROL VALVE GROUP
7J-9283 POWER CONTROL VALVE GROUP
7J9283 POWER CONTROL VALVE GROUP--R.H.
Part of Power Control shown on Page 153
7J9915 Valve parts are shown on Page 154
POWER CONTROL VALVE GROUP
7J-9284 POWER CONTROL VALVE GROUP
7J9284 POWER CONTROL VALVE GROUP--L.H.
Part of Power Control shown on Page 153
7J9915 Valve parts are shown on Page 154
POWER CONTROL
7D-2630 POWER CONTROL
POWER CONTROL (7D2630 N/S)--As Viewed from Operator's Seat--Part 1 of 4
7D-2630 POWER CONTROL
POWER CONTROL (7D2630 N/S)--As Viewed from Front of Machine--Part 2 of 4
6D8202 Pump parts are shown on Page 154
7D-2630 POWER CONTROL
POWER CONTROL (7D2630 N/S)--As Viewed from R.H. Side of Machine--Part 3 of 4
7D-2630 POWER CONTROL
POWER CONTROL (7D2630 N/S)--As Viewed from R.H. Side of Machine--Part 4 of 4
7J9283 and 9J9284 Valve parts are shown on Page 149
CYLINDER GP
LEANING WHEEL CYLINDER GROUP
4J-6633 LEANING WHEEL CYLINDER GROUP
4J6633 LEANING WHEEL CYLINDER GROUP--4.75" Bore x 8.50" Stroke
Part of Front Axle shown on Page 84
5J-7387 BLADE LIFT CYLINDER GROUP--R.H.,BLADE LIFT CYLINDER GROUP--L.H.
5J7387 BLADE LIFT CYLINDER GROUP-R.H.-4" Bore x 16.60" Stroke
5J7388 BLADE LIFT CYLINDER GROUP-L.H.-4" Bore x 16.60" Stroke
Part of 6D6040 Blade Lift Cylinder Group shown on Page 128
BLADE LIFT CYLINDER GROUP--R.H.,BLADE LIFT CYLINDER GROUP--L.H.
5J-7388 BLADE LIFT CYLINDER GROUP--R.H.,BLADE LIFT CYLINDER GROUP--L.H.
5J7387 BLADE LIFT CYLINDER GROUP-R.H.-4" Bore x 16.60" Stroke
5J7388 BLADE LIFT CYLINDER GROUP-L.H.-4" Bore x 16.60" Stroke
Part of 6D6040 Blade Lift Cylinder Group shown on Page 128
BLADE LIFT CYLINDER GROUP
6D-6040 BLADE LIFT CYLINDER GROUP
6D6040 BLADE LIFT CYLINDER GROUP
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements
listed on Pages 200 and 201. 5J7387 and 5J7388 Blade Lift
Cylinder parts are shown on Page 127
CYLINDER GP-STEER
4J-4115 CYLINDER GP-STEER
4J4115 STEERING CYLINDER GROUP--4" Bore x 6" Stroke
Part of Hydraulic Steering Gear shown on Page 138
CYLINDER GROUP
4D-3710 CYLINDER GROUP
4D3710 CYLINDER GROUP--5.25" Bore x 47" Stroke
Part of 6D6010, 7D2310, 7D7185, 7D7195, 7D7265, 7D7270, 7D7275 and 7D7280 Arrangements
listed on Pages 216 through 219
CYLINDER GROUP
5J-1952 CYLINDER GROUP
5J1952 CYLINDER GROUP--2 Required
Part of 7D7265 and 7D7270 Power Blade and Stabilizer Arrangements listed on Page 218
TIP CYLINDER GROUP
6J-7351 TIP CYLINDER GROUP
6J7351 TIP CYLINDER GROUP
Part of 6D6010, 7D2310, 7D7185 and 7D7195 Power Blade and Tip Arrangements listed on Pages 216 and 217
CYLINDER GROUP
5J-0156 CYLINDER GROUP
5J156 CYLINDER GROUP
Part of 7J4737 Ripper-Scarifier Arrangement listed on Page 229
HYDRAULIC CYLINDER GROUP
4J-8970 HYDRAULIC CYLINDER GROUP
4J8970 HYDRAULIC CYLINDER GROUP--5" Bore x 15" Stroke
Part of 6D6580 Scarifier Arrangement listed on Page 231
DRIVE GP
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
Part of Circle shown on Page 91
CIRCLE REVERSING MECHANISM CONTROL
CIRCLE REVERSING MECHANISM CONTROL
CIRCLE REVERSING MECHANISM CONTROL
Part of Circle shown on Page 91. 8D1505, 8D1566, 8D1502 and 8D1567
Joint parts are shown on Pages 87, 98 and 145
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
CIRCLE REVERSING MECHANISM
Part of 6D4475 Circle Group
CIRCLE REVERSING MECHANISM CONTROL
CIRCLE REVERSING MECHANISM CONTROL
CIRCLE REVERSING MECHANISM CONTROL
Part of 6D4475 Circle Group shown on Page 94
8D1505, 8D1566, 8D1502, and 8D1567 Joint parts are shown on
Pages 87, 98 and 145
CAMDRIVE AND BALL RESOLVER GROUP
7D-7295 CAMDRIVE AND BALL RESOLVER GROUP
7D7295 CAMDRIVE AND BALL RESOLVER GROUP
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements
listed on Pages 200 and 201. 8D2805 Camdrive and Ball
Resolver parts are shown on Pages 204 and 205
CAMDRIVE AND BALL RESOLVER GROUP
8D-2805 CAMDRIVE AND BALL RESOLVER GROUP
8D2805 CAMDRIVE AND BALL RESOLVER GROUP--Part 1 of 2
Part of 7D7295 Camdrive and Ball Resolver Group shown on Page 203
8D-2805 CAMDRIVE AND BALL RESOLVER GROUP
8D2805 CAMDRIVE AND BALL RESOLVER GROUP-Part 2 of 2
Part of 7D7295 Camdrive and Ball Resolver Group shown on Page 203
FILTER GP
FILTER GP-HYDRAULIC OIL
7J-0680 FILTER GP-HYDRAULIC OIL
7J680 HYDRAULIC OIL FILTER GROUP
Part of 6D5780 Rear Valve and Lines Group shown on Page 109
LINES GP-HYDRAULIC
FRONT VALVE AND LINES GROUP
6D-6060 FRONT VALVE AND LINES GROUP
6D6060 FRONT VALVE AND LINES GROUP--Part 1 of 2
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements listed on Page 200 and 201
6D-6060 FRONT VALVE AND LINES GROUP
6D6060 FRONT VALVE AND LINES GROUP--Part 2 of 2
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements listed on Pages 200 and 201
REAR VALVE AND LINES GROUP
6D-5780 REAR VALVE AND LINES GROUP
6D5780 REAR VALVE AND LINES GROUP--Part 1 of 2
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements listed on Pages 200 and 201
6J6041 Accumulator parts are shown on Page 105
6D-5780 REAR VALVE AND LINES GROUP
6D5780 REAR VALVE AND LINES GROUP--Part 2 of 2
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements listed on Pages 200 and 201
7J680 Filter and 6J2755 Valve parts are shown on Pages 111 and 118
FRAME VALVES AND LINES
6D-6370 FRAME VALVES AND LINES
FRAME VALVES AND LINES (6D6370 N/S)-As Viewed from R.H. Side of Machine
6J2400 and 7J8061 Valve parts are shown on Pages 118 and 119
POWER BLADE LINES GROUP
6D-6765 POWER BLADE LINES GROUP
6D6765 POWER BLADE LINES GROUP--As Viewed from R.H. Side of Machine--Part 1 of 2
Part of 7D7275 and 7D7280 Power Blade Arrangements listed on Page 219
6D-6765 POWER BLADE LINES GROUP
6D6765 POWER BLADE LINES GROUP--Tope View--Part 2 of 2
Part of 7D7275 and 7D7280 Power Blade Arrangements listed on Page 219
POWER BLADE AND STABLILIZER LINES GROUP
6D-6755 POWER BLADE AND STABLILIZER LINES GROUP
6D6755 POWER BLADE AND STABLILIZER LINES GROUP--Part 1 of 2
Part of 7D7265 and 7D7270 Power Blade & Stabilizer Arrangements listed on Page 218
7J4283 Swivel Joint parts are shown on Page 122
6D-6755 POWER BLADE AND STABLILIZER LINES GROUP
6D6755 POWER BLADE AND STABILIZER LINES GROUP--Part 2 of 2
Part of 7D7265 and 7D7270 Power Blade & Stabilizer Arrangements listed on Page 218
POWER BLADE AND TIP LINES GROUP
6D-6385 POWER BLADE AND TIP LINES GROUP
6D6385 POWER BLADE AND TIP LINES GROUP--Part 1 of 2
Part of 6D6010, 7D2310, 7D7185 and 7D7195 Power Blade & Tip Arrangements listed on Pages 216 & 217
6J2400 Valve parts are shown on Page 118
6D-6385 POWER BLADE AND TIP LINES GROUP
6D6385 POWER BLADE AND TIP LINES GROUP--Part 2 of 2
Part of 6D6010, 7D2310, 7D7185 and 7D7195 Power Blade & Tip Arrangements listed on Pages 216 & 217
7J4283 Swivel Joint parts are shown on Page 122
VALVES AND LINES GROUP
6D-6540 VALVES AND LINES GROUP
6D6540 VALVES AND LINES GROUP
Part of 6D6580 Scarifier Arrangement listed on Page 231
6J2400 Lock Valve parts are shown on Page 118
LINES GP-PUMP
PUMP, TANK AND LINES
7D-7690 PUMP, TANK AND LINES
PUMP, TANK AND LINES (7D7690 N/S)--Part 1 of 2
8J9410 Pump and Tank and Filter parts are shown on Page 123 and 126
7D-7690 PUMP, TANK AND LINES
PUMP, TANK AND LINES (7D7690 N/S)--Part 2 of 2
LINES GP-RIPPER
RIPPER HYDRAULIC LINES GROUP
7D-8590 RIPPER HYDRAULIC LINES GROUP
7D8590 RIPPER HYDRAULIC LINES GROUP
Part of 7J4737 Ripper-Scarifier Arrangement listed on Page 230
RIPPER HYDRAULIC LINES GROUP
7D-8580 RIPPER HYDRAULIC LINES GROUP
7D8580 RIPPER HYDRAULIC LINES GROUP
Part of 7J4737 Ripper-Scarifier Arrangement listed on Page 230
6J2400 Lock Valve parts are shown on Page 118
PENDULUM GP
POWERED PENDULUM GROUP
6D-3140 POWERED PENDULUM GROUP
6D3140 POWERED PENDULUM GROUP-Part 1 of 2
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements listed on Pages 200 and 201
6D-3140 POWERED PENDULUM GROUP
6D3140 POWERED PENDULUM GROUP-Part 2 of 2
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements listed on Pages 200 and 201
PUMP GP
GEAR PUMP GROUP
8J-9410 GEAR PUMP GROUP
8J9410 GEAR PUMP GROUP
Part of Pump, Tank and Lines shown on Page 124
GEAR PUMP GROUP
8J-9411 GEAR PUMP GROUP
8J9411 GEAR PUMP GROUP
Part of 8J9410 Gear Pump Group
GEAR PUMP ASSEMBLY
6D-8202 GEAR PUMP ASSEMBLY
6D8202 GEAR PUMP ASSEMBLY
Part of Power Control shown on Page 151
HYDRAULIC PUMP GROUP
9D-5200 HYDRAULIC PUMP GROUP
9D5200 HYDRAULIC PUMP GROUP
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements
listed on Pages 200 and 201. 9D5076 Universal Joint and 6J6320
Hydraulic Pump parts are shown on Pages 197 and 198
HYDRAULIC PUMP ASSEMBLY
6J-6320 HYDRAULIC PUMP ASSEMBLY
6J6320 HYDRAULIC PUMP ASSEMBLY
Part of 9D5200 Hydraulic Pump Group shown on Page 197
SHAFT GP
UNIVERSAL JOINT GP
8D-1505 UNIVERSAL JOINT GP
8D1505 JOINT ASSEMBLY
Part of Circle Reversing Mechanism Control shown on Pages 93 & 96
Only separate parts serviced. When complete Assembly is required
order 7D2059
UNIVERSAL JOINT GP
8D-1566 UNIVERSAL JOINT GP
8D1566 JOINT ASSEMBLY
Part of Circle Reversing Mechanism Control shown on Pages 93 & 96
Only separate parts serviced. When complete Assembly is required
order 7D2059
UNIVERSAL JOINT GP
8D-1502 UNIVERSAL JOINT GP
8D1502 JOINT ASSEMBLY
Part of Circle Reversing Mechanism Control and Power Control
Output Shaft shown on Pages 93 and 143
Only separate parts serviced. When complete Assembly is
required order 7D2058
JOINT ASSEMBLY
6D-3414 JOINT ASSEMBLY
6D3414 JOINT ASSEMBLY
Part of Power Control Output Shaft shown on Page 143
Only separate parts serviced. When complete Assembly
is required order 7D7012
JOINT ASSEMBLY
8D-1565 JOINT ASSEMBLY
8D1565 JOINT ASSEMBLY
Part of Hydraulic Steering Gear shown on Page 139
Only separate parts serviced. When complete Assembly is
required order 7D1983
JOINT ASSEMBLY
8D-2568 JOINT ASSEMBLY
8D2568 JOINT ASSEMBLY
Part of Hydraulic Steering Gear shown on Pages 138 and 139
Only separate parts serviced. When complete Assembly is
required order 7D6841
JOINT ASSEMBLY
8D-1504 JOINT ASSEMBLY
8D1504 JOINT ASSEMBLY
Part of Hydraulic Steering Gear shown on Page 139
Only separate parts serviced. When complete Assembly is
required order 7D1983
JOINT ASSEMBLY
8D-2569 JOINT ASSEMBLY
8D2569 JOINT ASSEMBLY
Part of Hydraulic Steering Gear shown on Pages 138 and 139
Only separate parts serviced. When complete Assembly is
required order 7D6841
JOINT ASSEMBLY
8D-1501 JOINT ASSEMBLY
8D1501 JOINT ASSEMBLY
Part of Power Control Output Shaft
Only separate parts serviced. When complete Assembly is
required order 7D1985
JOINT ASSEMBLY
8D-1563 JOINT ASSEMBLY
8D1563 JOINT ASSEMBLY
Part of Power Control Output Shaft shown on Page 143
Only separate parts serviced. When complete Assembly is
required order 7D1985
JOINT ASSEMBLY
7D-6842 JOINT ASSEMBLY
7D6842 JOINT ASSEMBLY
Part of Power Control Output Shaft shown on Page 143
Only separate parts serviced. When complete Assembly is
required order 7D7012
UNIVERSAL JOINT AS
8D-1567 UNIVERSAL JOINT AS
8D1567 JOINT ASSEMBLY
Part of Circle Reversing Mechanism Control and Power Control Output
Shaft shown on Pages 93, 96, & 143. Only separate parts serviced
When complete Assembly is required order 7D2058
POWER CONTROL DRIVE SHAFT
6D-5920 POWER CONTROL DRIVE SHAFT
POWER CONTROL DRIVE SHAFT (6D5920 N/S)
UNIVERSAL JOINT GROUP
9D-5076 UNIVERSAL JOINT GROUP
9D5076 UNIVERSAL JOINT GROUP
Part of 9D5200 Hydraulic Pump Group
SWIVEL GP
HYDRAULIC SWIVEL JOINT GROUP
7J-4283 HYDRAULIC SWIVEL JOINT GROUP
7J4283 HYDRAULIC SWIVEL JOINT GROUP
Part of 6D6755 and 6D6385 Blade and Lines Groups shown
on Pages 114 and 117
TANK GP
PUMP, TANK AND LINES
7D-7690 PUMP, TANK AND LINES
PUMP, TANK AND LINES (7D7690 N/S)--Part 1 of 2
8J9410 Pump and Tank and Filter parts are shown on Page 123 and 126
7D-7690 PUMP, TANK AND LINES
PUMP, TANK AND LINES (7D7690 N/S)--Part 2 of 2
TANK AND FILTER
6J-4020 TANK AND FILTER
TANK AND FILTER (6J4020 N/S)
Part of Pump, Tank and Lines shown on Page 124
COVER GP-PROTECTION
5D-1910 COVER GP-PROTECTION
5D1910 PROTECTION COVER GROUP--Hydraulic Tank Cap
Part of 9D2280 Vandalism Protection Arrangement
listed on Page 262
TANK AND FILTER GROUP
8J-8676 TANK AND FILTER GROUP
8J8676 TANK AND FILTER GROUP
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements
listed on Pages 200 and 201
VALVE GP
FRONT VALVE AND LINES GROUP
6D-6060 FRONT VALVE AND LINES GROUP
6D6060 FRONT VALVE AND LINES GROUP--Part 1 of 2
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements listed on Page 200 and 201
6D-6060 FRONT VALVE AND LINES GROUP
6D6060 FRONT VALVE AND LINES GROUP--Part 2 of 2
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements listed on Pages 200 and 201
REAR VALVE AND LINES GROUP
6D-5780 REAR VALVE AND LINES GROUP
6D5780 REAR VALVE AND LINES GROUP--Part 1 of 2
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements listed on Pages 200 and 201
6J6041 Accumulator parts are shown on Page 105
6D-5780 REAR VALVE AND LINES GROUP
6D5780 REAR VALVE AND LINES GROUP--Part 2 of 2
Part of 8D5315 and 8D5305 Slope and Grade Control Arrangements listed on Pages 200 and 201
7J680 Filter and 6J2755 Valve parts are shown on Pages 111 and 118
FRAME VALVES AND LINES
6D-6370 FRAME VALVES AND LINES
FRAME VALVES AND LINES (6D6370 N/S)-As Viewed from R.H. Side of Machine
6J2400 and 7J8061 Valve parts are shown on Pages 118 and 119
LOCK VALVE GROUP
6J-2400 LOCK VALVE GROUP
6J2400 LOCK VALVE GROUP
Part of Frame Valves and Lines, 6D6385, 7D8580 & 6D6540
Lines Groups shown on Pages 110, 116, 120 and 121
VALVES AND LINES GROUP
6D-6540 VALVES AND LINES GROUP
6D6540 VALVES AND LINES GROUP
Part of 6D6580 Scarifier Arrangement listed on Page 231
6J2400 Lock Valve parts are shown on Page 118
IMPLEMENT VALVE GROUP
6J-7251 IMPLEMENT VALVE GROUP
6J7251 IMPLEMENT VALVE GROUP
Part of Control Valve Bank, 6J7239, 6J6744, 6J7291, 6J7274, 6J7275, 6J7292, 6J6665, 6J7276, 6J7277,
6J7278, 6J7279, 6J7283, 6J7284, 6J7280, 6J7281, 6J7282, 6J7286, 6J7285, 6J7287, 6J7288, 6J7289 and
6J7290 Control Valve Bank Groups shown on Pages 147 and 175 through 193
IMPLEMENT VALVE GROUP
6J-7253 IMPLEMENT VALVE GROUP
6J7253 IMPLEMENT VALVE GROUP
Part of 6J7239, 6J6744, 6J7291, 6J7275, 6J7292, 6J6665, 6J7276, 6J7277, 6J7278, 6J7279, 6J7284,
6J7280, 6J7281, 6J7282, 6J7285, 6J7287, 6J7288, 6J7289 and 6J7290 Control Valve Bank Groups
shown on Pages 175 through 182, 184 through 187 and 189 through 193
IMPLEMENT VALVE GROUP
6J-7254 IMPLEMENT VALVE GROUP
6J7254 IMPLEMENT VALVE GROUP
Part of 6J7274, 6J7275, 6J6665, 6J7276, 6J7277, 6J7278, 6J7279, 6J7280, 6J7281, 6J7282, 6J7286,
6J7287, 6J7288, 6J7289 and 6J7290 Control Valve Bank Groups shown on Pages 176 through 182,
185 through 188 and 190 through 193
IMPLEMENT VALVE GROUP
6J-7255 IMPLEMENT VALVE GROUP
6J7255 IMPLEMENT VALVE GROUP
Part of 6J6665, 6J7283, 6J7284, 6J7286, 6J7285, 6J7287, 6J7288, 6J7289 and 6J7290 Control
Valve Bank Groups shown on Pages 178, 183, 184 and 188 through 193
VALVE GP-CONTROL
CONTROL VALVE ASSEMBLY
4D-7850 CONTROL VALVE ASSEMBLY
4D7850 CONTROL VALVE ASSEMBLY
Part of 4D7215 Steering Gear Assembly
LEANING WHEEL CONTROL
6D-6000 LEANING WHEEL CONTROL
LEANING WHEEL CONTROL (6D6000 N/S)
CONTROL VALVE BANK
6J-6701 CONTROL VALVE BANK
CONTROL VALVE BANK (6J6701 N/S)
Part of Leaning Wheel Control. 6J6682 and 6J7251 Implement Valve
parts are shown on Pages 147 and 148
CONTROL VALVE BANK GROUP
6J-7239 CONTROL VALVE BANK GROUP
6J7239 CONTROL VALVE BANK GROUP
Part of 6D6452 Hydraulic Control Group shown on Page 155
6J6682, 6J7251 & 6J7253 Valve parts are shown on
Pages 147, 148 and 194
CONTROL VALVE BANK GROUP
6J-6744 CONTROL VALVE BANK GROUP
6J6744 CONTROL VALVE BANK GROUP
Part of 6D6453 Hydraulic Control Group shown on Page 155
6J6682, 6J7251 and 6J7253 Valve parts are shown
on Pages 147, 148 and 194
CONTROL VALVE BANK GROUP
6J-7291 CONTROL VALVE BANK GROUP
6J7291 CONTROL VALVE BANK GROUP
Part of 6D6682 Hydraulic Control Group shown on Page 156
6J6682, 6J7251 and 6J7253 Valve parts are shown
on Pages 147, 148 and 194
CONTROL VALVE BANK GROUP
6J-7274 CONTROL VALVE BANK GROUP
6J7274 CONTROL VALVE BANK GROUP
Part of 6D6462 Hydraulic Control Group shown on Page 156
6J6682, 6J7251 and 6J7254 Valve parts are shown
on Pages 147, 148 and 195
CONTROL VALVE BANK GROUP
6J-7275 CONTROL VALVE BANK GROUP
6J7275 CONTROL VALVE BANK GROUP
Part of 6D6463 Hydraulic Control Group shown on Page 157
6J6682, 6J7251, 6J7253 and 6J7254 Valve parts are
shown on Pages 147, 148, 194 and 195
CONTROL VALVE BANK GROUP
6J-7292 CONTROL VALVE BANK GROUP
6J7292 CONTROL VALVE BANK GROUP
Part of 6D6684 Hydraulic Control Group shown on Page 174
6J6682, 6J7251 and 6J7253 Valve parts are shown
on Pages 147, 148 and 194
CONTROL VALVE BANK GROUP
6J-6665 CONTROL VALVE BANK GROUP
6J6665 CONTROL VALVE BANK GROUP
Part of 6D6456 Hydraulic Control Group shown on Page 158
6J6682, 6J7251, 6J7253, 6J7254 and 6J7255 Valve parts are
shown on Pages 147, 148, 194, 195 and 196
CONTROL VALVE BANK GROUP
6J-7276 CONTROL VALVE BANK GROUP
6J7276 CONTROL VALVE BANK GROUP
Part of 6D6464 Hydraulic Control Group shown on Page 159
6J6682, 6J7251, 6J7253 and 6J7254 Valve parts are shown on Pages 147, 148, 194 and 195
CONTROL VALVE BANK GROUP
6J-7277 CONTROL VALVE BANK GROUP
6J7277 CONTROL VALVE BANK GROUP
Part of 6D6473 Hydraulic Control Group shown on Page 160
6J6682, 6J7251, 6J7253 and 6J7254 Valve parts are shown on Pages 147, 148, 194 and 195
CONTROL VALVE BANK GROUP
6J-7278 CONTROL VALVE BANK GROUP
6J7278 CONTROL VALVE BANK GROUP
Part of 6D6474 Hydraulic Control Group shown on Page 161
6J6682, 6J7251, 6J7253 and 6J7254 Valve parts are shown on Pages 147, 148, 194 and 195
CONTROL VALVE BANK GROUP
6J-7279 CONTROL VALVE BANK GROUP
6J7279 CONTROL VALVE BANK GROUP
Part of 6D6475 Hydraulic Control Group shown on Page 162
6J6682, 6J7251, 6J7253 and 6J7254 Valve parts are shown on Pages 147, 148, 194 and 195
CONTROL VALVE BANK GROUP
6J-7283 CONTROL VALVE BANK GROUP
6J7283 CONTROL VALVE BANK GROUP
Part of 6D6642 Hydraulic Control Group shown on Page 163
6J6682, 6J7251 and 6J7255 Valve parts are shown on Pages 147, 148 and 196
CONTROL VALVE BANK GROUP
6J-7284 CONTROL VALVE BANK GROUP
6J7284 CONTROL VALVE BANK GROUP
Part of 6D6643 Hydraulic Control Group shown on Page 164
6J6682, 6J7251, 6J7253 and 6J7255 Valve parts are shown on Pages 147, 148, 194 and 196
CONTROL VALVE BANK GROUP
6J-7280 CONTROL VALVE BANK GROUP
6J7280 CONTROL VALVE BANK GROUP
Part of 6D6644 Hydraulic Control Group shown on Page 165
6J6682, 6J7251, 6J7253 and 6J7254 Valve parts are shown on Pages 147, 148, 194 and 195
CONTROL VALVE BANK GROUP
6J-7281 CONTROL VALVE BANK GROUP
6J7281 CONTROL VALVE BANK GROUP
Part of 6D6645 Hydraulic Control Group shown on Page 166
6J6682, 6J7251, 6J7253 and 6J7254 Valve parts are shown on Pages 147, 148, 194 and 195
CONTROL VALVE BANK GROUP
6J-7282 CONTROL VALVE BANK GROUP
6J7282 CONTROL VALVE BANK GROUP
Part of 6D6646 Hydraulic Control Group shown on Page 167
6J6682, 6J7251, 6J7253 and 6J7254 Valve parts are shown on Pages 147, 148, 194 and 195
CONTROL VALVE BANK GROUP
6J-7286 CONTROL VALVE BANK GROUP
6J7286 CONTROL VALVE BANK GROUP
Part of 6D6653 Hydraulic Control Group shown on Page 168
6J6682, 6J7251, 6J7254 and 6J7255 Valve parts are shown on Pages 147, 148, 195 and 196
CONTROL VALVE BANK GROUP
6J-7285 CONTROL VALVE BANK GROUP
6J7285 CONTROL VALVE BANK GROUP
Part of 6D6654 Hydraulic Control Group shown on Page 169
6J6682, 6J7251, 6J7253 and 6J7255 Valve parts are shown on Pages 147, 148, 194 and 196
CONTROL VALVE BANK GROUP
6J-7287 CONTROL VALVE BANK GROUP
6J7287 CONTROL VALVE BANK GROUP
Part of 6D6664 Hydraulic Control Group shown on Page 170
6J6682, 6J7251, 6J7253, 6J7254 and 6J7255 Valve parts are shown on Pages 147, 148, 194, 195 and 196
CONTROL VALVE BANK GROUP
6J-7288 CONTROL VALVE BANK GROUP
6J7288 CONTROL VALVE BANK GROUP
Part of 6D6665 Hydraulic Control Group shown on Page 171
6J6682, 6J7251, 6J7253, 6J7254 and 6J7255 Valve parts are shown on Pages 147, 148, 194, 195 and 196
CONTROL VALVE BANK GROUP
6J-7289 CONTROL VALVE BANK GROUP
6J7289 CONTROL VALVE BANK GROUP
Part of 6D6674 Hydraulic Control Group shown on Page 172
6J6682, 6J7251, 6J7253, 6J7254 and 6J7255 Valve parts are shown on Pages 147, 148, 194, 195 and 196
CONTROL VALVE BANK GROUP
6J-7290 CONTROL VALVE BANK GROUP
6J7290 CONTROL VALVE BANK GROUP
Part of 6D6675 Hydraulic Control Group shown on Page 173
6J6682, 6J7251, 6J7253, 6J7254 and 6J7255 Valve parts are shown on Pages 147, 148, 194, 195 and 196
VALVE GP-PILOT
ACCUMULATOR CHARGING VALVE GROUP
8J-8761 ACCUMULATOR CHARGING VALVE GROUP
8J8761 ACCUMULATOR CHARGING VALVE GROUP
Part of 7D8850 & 8D9640 Parking Brake Control Groups shown on Pages 74 and 77
VALVE GP-RELIEF
SAFETY RELIEF VALVE GROUP
6J-2755 SAFETY RELIEF VALVE GROUP
6J2755 SAFETY RELIEF VALVE GROUP
Part of 6D5780 Rear Valve and Lines Group shown on Page 109
MANIFOLD AND RELIEF VALVE GROUP
7J-8061 MANIFOLD AND RELIEF VALVE GROUP
7J8061 MANIFOLD AND RELIEF VALVE GROUP
Part of Frame Valves and Lines shown on Page 110
7J8060 Relief Valve parts are shown on Page 122
VALVE GP-RELIEF
7J-8060 VALVE GP-RELIEF
7J8060 RELIEF VALVE GROUP
Part of 7J8061 Manifold and Relief Valve Groups shown on Page 119
IMPLEMENT RELIEF VALVE GROUP
6J-6682 IMPLEMENT RELIEF VALVE GROUP
6J6682 IMPLEMENT RELIEF VALVE GROUP
Part of all Control Valve Bank Groups shown on Pages 147 & 175
through 193
RELIEF VALVE GROUP
7J-9915 RELIEF VALVE GROUP
7J9915 RELIEF VALVE GROUP
Part of 7J9283 and 7J9284 Power Control Valve Groups shown
on Page 149

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Service Magazine
The Accumulator Discharging and Charging Procedures are Updated {5077}
The Accumulator Discharging and Charging Procedures are Updated {5077}
Different Seal For Control Shaft In Power Control Box{5201}
1980/01/28
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Service Magazine
Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Easy Five-Minute Coolant Conditioner Test With 8T5296 Coolant Conditioner Test Kit{1395,0786}
1987/03/23
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Improved Seals Used; Seal Replacement In Folded Core Radiators {1353}
1988/05/09
New Publication Available-"Coolant And Your Engine"{1395,0374,0375}
1989/02/13
Engine Coolant Can Be Recycled{1395}
1989/11/13
Caterpillar Introduces New Long Life Heavy Duty Engine Coolant{1395}
1994/09/19
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
New Pin For Moldboard Shift Cylinder Prevents Loss During Operation{5229}
1984/06/04
New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Reuse And Salvage Guidelines
Motor Grader Circle Pinion Reuse {5207}
Motor Grader Circle Pinion Reuse {5207}
Reconditioning of Worn 6D-7995 Circle Drive Housing on 12F and 14E Motor Graders{5207}
Reconditioning of Worn 6D-7995 Circle Drive Housing on 12F and 14E Motor Graders{5207}
Service Magazine
Change To Parts Service Of Shaft Assemblies Used In Circle Drive Transfer Gear Housing{5208}
1982/01/25
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Tool Operating Manual
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
A Replacement Filter Is Incorrectly Identified {5050, 5068}
2002/12/23
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Special Instruction
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
New Protective Caps For Hose Clamps Are Now Available {5057}
2001/11/19
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
2005/02/21
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Technical Information Bulletin
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Service Magazine
New Pin For Moldboard Shift Cylinder Prevents Loss During Operation{5229}
1984/06/04
New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Service Magazine
Different Seal For Control Shaft In Power Control Box{5201}
1980/01/28
New Pin For Moldboard Shift Cylinder Prevents Loss During Operation{5229}
1984/06/04
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Canister Size Of Coolant Conditioner Element Has Changed{1350}
1985/11/25
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Special Instruction
Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
The Serviceability of Metering Pumps Has Been Limited {4312}
2014/07/14
New Metering Pump Groups For Steering Control Prevent Oil Leaks {4300, 4301, 4312}
2010/01/27
Reuse And Salvage Guidelines
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Thermal Spray Procedures for Hydraulic Swivel {0679, 5060}
Thermal Spray Procedures for Hydraulic Swivel {0679, 5060}
Tool Operating Manual
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Service Magazine
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
A New Strainer Assembly For the Hydraulic Tank Is Now Available {5056, 5068}
2013/09/02
Welding On Fuel And Hydraulic Tanks {0353, 0679, 1273, 5056, 7000}
2005/12/19
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/10/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Changes to the Usage and Cleaning of the Contamination Monitor Group {0784, 5050}
2010/09/10
Special Instruction
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Operating Instructions for Cat 1U-9400 Series Hydraulic Test Center {0784}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Technical Information Bulletin
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Updated Ride Control Accumulator Test and Charge Instructions{0738, 5004, 5077, 5081, 7474}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
204-7392 (Air Motor Driven) Filter Cart {0645, 0680, 0738, 5056, 5068}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
9U-5000 Series Hydraulic Test Bench {0599, 0738}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
4C-9437 Portable Hydraulic Tester , 1U-8761 Portable Hydraulic Tester (Canceled), 4C-9675 Portable Hydraulic Tester , 1U-9951 Portable Hydraulic Tester (Canceled){0599, 0738}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures for Using 9U-5971 and 173-9842 Filter Cart Group {0599, 0738, 5050, 5056, 5057, 5068, 5095, 7579}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedures For Using: 127-8781 Transfer Filter Cart , old 9U-7361 (110V, 60 hz), 169-7159 Transfer Filter Cart , old 127-8782 (220V, 50 hz) CE, 174-9158 Transfer Filter Cart , old 129-0849 (Air Motor Driven){0374, 0599, 0680, 0738}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Procedure for Using 173-8839 Fluid Storage Filter Cart {0113, 0374, 0599, 0680, 0738, 7579}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
Using the 164-2691 Printer Group {0374, 0599, 0684, 5057}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
188-3242 Filter Cart Group and 227-2479 Filter Cart Group{0374, 0599, 0680, 0738, 0768, 5050, 5056, 5095}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Crimping Permanent Couplings Using the 136-3642 Crimp Tool Group in Combination and XT Hose Machines{0374, 0599, 0684, 5057}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Procedure for Filtering <NOBR> 9U-5000</NOBR> Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Procedure for Filtering 9U-5000 Hydraulic Test Bench Hydraulic Oil {0680, 0738, 0768, 0784, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Excavator Hydraulic Oil {0680, 0768, 5050, 5056}
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
Filtration Procedure for Motor Grader Hydraulic Oil. {0680, 0768, 5050, 5056}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Procedure for Operating Caterpillar Filter Carts {0680, 0768, 5050}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Basic Principles of Kidney Loop Filtering Hydraulic Fluid Systems {0680, 0768, 5050, 5056}
Bench Test Procedures
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Required Tooling for Bench Testing Hydraulic Components {0784, 4000, 4005, 4129, 4250, 4300, 5050}
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New Hydraulic Hose Assembly Machine Integrates Crimputer II with Radial Crimping Technology {0738}
2004/05/03
Single Element and Multiple Element Filter Heads are Available for Customized Systems {0738}
2004/03/29
Hose Kit Helps the Technician Properly Prepare Hydraulic Hose for Assembly {0684}
2004/05/31
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Test Kit Checks Oil Coolers for Leaks {0768, 0781, 0783, 0784}
2004/12/27
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/27
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Remove Certain 6D-7726 Hose Assemblies from Inventory {0738}
2005/12/12
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Proper Identification of Ports on 5P-0306 Vacuum Transducer {0768, 5050, 5056}
2006/01/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
New Valve Guide Available{1104}
1995/12/25
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Specifications
Fuel Bypass Valve<BR> (Scroll Fuel System-PC)
3306 VEHICULAR ENGINE
Tool Operating Manual
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Magazine
New Valve Guide Available{1104}
1995/12/25
The 6V-8633 Connector Has Changed {5057, 7553}
2005/11/28
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/11/29
Tool Operating Manual
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}
Repairing Line Relief Valve Seats in Hydraulic Control Valves Using the 229-3612 Hydraulic Valve Seat Repair Kit{0738, 5117}

Truck sale:

Caterpillar 14E
 
Caterpillar 14E
- motor graders
NMC
Caterpillar 314E STL, Crawler Excavators, Construction
104,500 
Caterpillar 314E STL, Crawler Excavators, Construction
- Crawler Excavators
HOLT OF CALIFORNIA
Caterpillar 314E, Crawler Excavators, Construction
80,003 
Caterpillar 314E, Crawler Excavators, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
 
128,589 
Caterpillar 314E, Crawler Excavators, Construction


 
165,000 
Caterpillar 314EL, Crawler Excavators, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.