AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3S8701 FINAL DRIVE GROUP--Lower Half-Part 2 of 2 D5 TRACK-TYPE TRACTOR


POWER TRAIN
DRIVE GP-FINAL
STEERING AND BRAKING SYSTEM
BRAKE GP
BAND & LINING AS-BRAKE
CLUTCH GP-STEERING
OPERATOR STATION
CONTROL GP-HYDRAULIC

TRACK-TYPE TRACTOR D5 TRACK-TYPE TRACTOR 98J
 D5 TRACTOR--SPECIAL APPLICATION 98J01134-01590 (MACHINE) UEG0714S D5 98J   (1967)

POWER TRAIN

DRIVE GP-FINAL
FINAL DRIVE GROUP
3S-8701 FINAL DRIVE GROUP
3S-8701 FINAL DRIVE GROUP
 

#UEG0714S0090
 

3S-8701: FINAL DRIVE GROUP

3S8701 FINAL DRIVE GROUP--Lower Half-Part 2 of 2
c158301 UEG0714S
3S8701 FINAL DRIVE GROUP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1571 [32] BOLT  
  8F-6809 [32] LOCKWASHER  
    USE 7M7260 GASKET SOLUTION
  2F-7576 [2] SHAFT  
  5M-2131 [2] NUT  
  2B-8093 [2] PIN  
  2B-8092 [2] RING  
  2B-8162 [4] DOWEL  
  5B-7267 [4] CORK  
  7B-0358 [2] CONE  
  7B-0357 [2] CUP  
  7M-0481 RC [4] SEAL GROUP  
  7M-0475 [2] RING  
    (Part of 7M781 Assem.)
  6B-4598 [28] BOLT  
  6B-6682 [28] NUT  
  1H-2433 [6] LOCK (6 75" LONG)  
  5M-5241 [8] LOCK (4" LONG)  
  5M-5242 [2] GEAR (49 TEETH)  
  0S-1585 [40] BOLT  
  2M-0849 [40] WASHER  
    USE 7M7260 GASKET SOLUTION
  2P-1511 [2] CASE  
  3S-9182 [4] PLUG  
  5S-0727 [2] SPROCKET GROUP  
  3S-8182 [27] BOLT  
  7H-3607 [27] NUT  
  5S-0724 [9] SEGMENT (std.)  
    (Parts of 5S727 Assem.)
    -OR-
  3P-5711 H [9] SEGMENT (snow & mud)  
  2P-1553 [2] BEARING  
  3P-5755 C [2] EXTENSION  
  4F-6070 [2] GUARD  
  4B-4340 [9] RIVET  
    (Parts of 5S726 Assem.)
  5S-0726 [1] HUB ASSEM.  
    (Part of 5S727 Assem.)
  3S-8636 [2] NUT  
  4H-9040 [2] NUT  
  3F-1960 [2] LOCK  
  3P-3954 C [2] GASKET  
  3F-1958 [2] GUARD  
  0S-0509 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  7S-7625 [2] SUPPORT ASSEM.  
  2B-7408 [2] PLUG (PIPE)  
  9M-5894 [2] SEAL  
  3B-8491 [2] FITTING  
  1F-1006 [1] DOWEL  
    (Part of 2S1477 Assem.)
  2B-7557 [2] CORK  
  3P-5754 RC [2] HUB  
  3F-1972 [2] RETAINER ASSEM.  
  8B-6343 [2] CUP  
  3F-1396 [2] CONE  
  1B-8742 [2] KEY  
  3H-2617 [4] PIN (Roll)  
    (Part of 3F1972 Assem.)
  2F-2815 [2] LOCK  
  2S-4366 [8] SHIM  
  1A-3585 [2] NUT  
  3F-1956 [2] CAP  
  9F-2247 [2] PLUG  
  8B-1312 [2] PIN  
    (Part of 2S1477 Assem.)
  2M-0122 [4] DOWEL  
  3F-1965 [1] BUSHING  
    (Part of 7S7625 Assem.)
  0S-1587 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  3F-1955 [2] GASKET  
  4B-1281 [16] SCREW  
  3F-1954 [2] RETAINER  
  8M-0476 [2] CAGE  
  2S-1477 [2] HOLDER ASSEM.  
  6F-7024 [2] BOLT  
  1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  3P-3623 C [2] LOCK  
  1F-4583 [2] SEAL  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF FINAL DRIVE
 

#UEG0714S0091
 

3S-8202: BRAKES

BRAKES (3S8202 N/S)--Part 1 of 2
c127481 UEG0714S
3S8202 BRAKES Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] END  
2. [8] NUT  
3. [2] ROD  
4. [2] PIN  
5. [8] COTTER PIN  
6. [1] PIN  
7. [2] ROD  
8. [2] ROD END  
9. [4] PIN  
10. [1] PEDAL (Right Hand)  
11. [1] PEDAL (Left Hand)  
12. [2] SHAFT  
13. [2] KEY  
14. [2] COTTER PIN  
15. [2] WASHER  
16. [2] SHAFT  
17. [4] WASHER  
18. [2] BOLT  
19. C [4] BEARING  
20. [4] BOLT  
21. C [2] BRACKET  
22. [4] BOLT  
23. [1] LEVER (Right Hand)  
  [1] LEVER (Left Hand)  
  [2] KEY  
24. [2] LEVER  
  [2] KEY  
  C   INDICATES CHANGE
 

#UEG0714S0092
 

3S-8202: BRAKES

BRAKES (3S8202 N/S)--Part 2 of 2
Brake Band parts are shown on Page 60
c127482 UEG0714S
3S8202 BRAKES Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1592 [8] BOLT  
  3B-4510 [8] LOCKWASHER  
2. 6B-7149 [2] LEVER  
3. 8B-1419 [2] PIN  
4. 3B-4617 [4] COTTER PIN  
5. 0L-1365 [2] WASHER  
6. 8H-9379 [2] NUT  
7. 1M-0547 Y [2] BAND ASSEM. (Upper)  
    (See Separate Illustration)
8. 0S-1588 [2] BOLT  
9. 3B-4506 [4] LOCKWASHER  
10. 3S-5310 [2] BRACKET  
11. 4B-6493 [2] SPRING  
12. 1S-6889 [1] SPRING  
13. 8M-7173 [1] PAWL  
14. 7S-8025 [1] ROD  
15. 4B-4278 [1] WASHER  
16. 3B-4615 [2] COTTER PIN  
17. 1B-4203 [1] NUT  
18. 1A-9252 [1] ROD END  
19. 1J-4384 [1] PIN  
20. 0T-0883 [1] WASHER  
21. 7S-8026 [1] LEVER  
22. 5S-9774 [1] BRACKET ASSEM.  
23. 0S-1594 [2] BOLT  
24. 3S-5300 [1] RATCHET ASSEM.  
25. 9M-6020 [1] PIN  
26. 4B-4281 [1] WASHER  
27. 6F-2686 Y [2] BAND ASSEM. (Center)  
    (See Separate Illustration)
28. 1B-4202 [12] NUT  
  3B-4505 [12] LOCKWASHER  
29. 1D-5117 [2] NUT  
30. 4B-3613 [2] SET SCREW  
31. 4M-8766 Y [2] BAND ASSEM.  
    (See Separate Illustration)
32. 6B-7155 [2] ANCHOR  
33. 6B-7144 [4] PIN  
  8B-0407 [4] WASHER  
34. 6B-7178 [2] FORK  
  Y   SEPARATE ILLUSTRATION
 

#UEG0714S0093
 

6F-2688: BRAKE BAND ASSEMBLIES

BRAKE BAND ASSEMBLIES (6F2688 N/S)
Part of Brakes shown on Page 59
c107540 UEG0714S
6F2688 BRAKE BAND ASSEMBLIES Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4M-8766 [1] BAND ASSEM.  
    (LOWER)
  7B-5052 [16] RIVET  
  8B-0832 [2] LINING  
  6F-2683 [1] SPACER  
  8B-9519 [6] BOLT  
    (PARTS OF ASSEM 4M8766)
  8B-0832 [2] LINING  
  7B-5056 [14] RIVET  
    (PARTS OF ASSEM. 1M547)
  1B-4202 [12] NUT  
  3B-4505 [12] LOCKWASHER  
  1M-0547 [1] BAND ASSEM.  
    (UPPER)
  8B-9519 [6] BOLT  
    (PART OF ASSEM. 6F2686)
  6F-2683 [1] SPACER  
    (PART OF ASSEM. 6F2686)
  4B-4310 [2] RIVET  
  6B-7482 [1] SPRING (3.875" LONG)  
  6B-7483 [1] SPRING (3.25" LONG)  
    (PARTS OF ASSEM. 1M547)
  6F-2686 [1] BAND ASSEM.  
    (CENTER)
  8B-0832 [2] LINING  
  7B-5052 [16] RIVET  
  4B-4320 [6] RIVET  
  6F-2682 [1] PLATE  
    (PARTS OF ASSEM. 6F2686)
 

#UEG0714S0094
 

3S-6999: STEERING CLUTCH GROUP

3S6999 STEERING CLUTCH GROUP
Serial No. 98J1134 to 98J1450 inclusive
c209110 UEG0714S
3S6999 STEERING CLUTCH GROUP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7H-1319 [2] COUPLING ASSEM.  
  1B-5932 [2] DOWEL  
    (1 IN EACH COUPLING ASSEM. 7H1319)
  6B-5063 [16] BOLT  
  6B-8357 [8] LOCK  
  3S-6981 [2] SHIM-PACK  
  0S-1595 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  3S-5135 [2] SEAL  
  9B-3175 [2] BOLT  
  6B-9260 [2] LOCK  
  8P-1182 C [1] SHAFT  
  6H-3566 [2] CONE  
  6H-3568 [2] CUP  
  2P-9667 [2] CAGE  
  3B-4990 C [10] BOLT  
  6B-6683 C [10] NUT  
  7F-8351 C [5] LOCK  
  5P-4257 C [2] SEAL  
  2F-2625 [2] WASHER  
  6P-8359 C [2] GASKET  
  8P-1183 C [1] GEAR (47 TEETH)  
  5F-2254 [2] RING  
  1A-1420 [2] RING  
  8S-5723 [2] PLATE ASSEM.  
  5F-2287 [2] CAGE ASSEM.  
  2A-3746 [4] PLUG  
    (2 IN EACH CAGE ASSEM. 5F2287)
  5F-3999 [2] SEAL  
  5F-2252 [2] WASHER  
  8M-8068 [2] BEARING  
  6B-9633 [16] SPRING (OUTER)  
  6B-9632 [16] SPRING (INNER)  
  1B-5932 [2] DOWEL  
  6B-9273 [16] STUD  
  6B-4978 [16] COLLAR  
  6B-4977 [32] LOCK  
  9B-3175 [2] BOLT  
  6B-9260 [2] LOCK  
  2F-2625 [2] WASHER  
  1P-1931 [2] SHAFT  
  7M-5002 [2] DRUM  
  1F-3396 [2] BUSHING  
    (1 IN EACH PLATE ASSEM. 8S5723)
  5F-2257 [2] NUT  
  4B-9806 [4] SET SCREW  
  1A-3987 [24] DISC  
  2F-8621 [24] DISC ASSEMBLY-CLUTCH  
  C   INDICATES CHANGE
 

#UEG0714S0095
 

6P-4355: STEERING CLUTCH GROUP

6P4355 STEERING CLUTCH GROUP
Serial No. 98J1451-Up
c209729 UEG0714S
6P4355 STEERING CLUTCH GROUP Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2P-9667 [1] CAGE  
  6H-3566 [1] CONE  
  6H-3568 [1] CUP  
  3B-4990 [10] BOLT  
  6B-6683 [10] NUT  
  7F-8351 [5] LOCK  
  8P-1182 C [1] SHAFT  
  6P-4239 [1] CAGE  
  5P-4257 C [2] SEAL  
  3S-5135 [2] SEAL  
  2P-9091 [1] CONE  
  1L-7319 [1] CUP  
  9B-3175 [2] BOLT  
  6B-9260 [2] LOCK  
  2F-2625 [2] WASHER  
  6P-8359 C [2] GASKET  
  8P-1183 C [1] GEAR (47 teeth)  
  0S-1595 [12] BOLT  
  3B-4508 [12] LOCKWASHER  
  3S-6981 [2] SHIM PACK  
  7H-1319 [2] COUPLING ASSEM.  
  1B-5932 [2] DOWEL  
    (1 in each 7H1319 Assem.)
  5F-2254 [2] RING  
  1A-1420 [2] RING  
  8S-5723 [2] PLATE ASSEM.  
  6B-5063 [16] BOLT  
  6B-8357 [8] LOCK  
  5F-2287 [2] CAGE ASSEM.  
  2A-3746 [4] PLUG  
    (2 IN EACH CAGE ASSEM. 5F2287)
  5F-3999 [2] SEAL  
  5F-2252 [2] WASHER  
  8M-8068 [2] BEARING  
  6B-9633 [16] SPRING (OUTER)  
  6B-9632 [16] SPRING (INNER)  
  1B-5932 [2] DOWEL  
    (PART OF 7M5038 ASSEM.)
  6B-9273 [16] STUD  
  6B-4978 [16] COLLAR  
  6B-4977 [32] LOCK  
  9B-3175 [2] BOLT  
  6B-9260 [2] LOCK  
  2F-2625 [2] WASHER  
  1P-1931 [2] SHAFT  
  7M-5038 [2] DRUM ASSEM  
  1F-3396 [2] BUSHING  
    (1 IN EACH PLATE ASSEM.8S5723)
  5F-2257 [2] NUT  
  4B-9806 [4] SET SCREW  
  1A-3987 [24] DISC  
  2F-8621 [24] PLATE ASSEM.  
 

#UEG0714S0096
 

1P-0993: STEERING CLUTCH HYDRAULIC CONTROL

STEERING CLUTCH HYDRAULIC CONTROL (1P993 N/S)--Top View-Part 1 of 2
Serial No. 98J1134 to 98J1556 inclusive
c129201 UEG0714S
1P0993 STEERING CLUTCH HYDRAULIC CONTROL Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-0676 [4] PIN  
  3B-4615 [4] COTTER PIN  
2. [2] LEVER  
  1B-8703 [2] KEY  
3. 5B-9079 [2] NUT  
4. 1F-5403 [2] END  
5. 0S-1591 [2] BOLT  
6. 1D-4717 [2] NUT  
7. 3S-7862 [1] ROD (Left Hand)  
8. 8M-6776 [1] ROD (Left Hand)  
9. 3B-4631 [2] COTTER PIN  
10. 3S-7431 [1] SHAFT  
11. 9S-5690 [1] BRACKET (Left Hand)  
12. 6D-5974 [12] BEARING  
13. 9S-4775 [4] BEARING  
14. 1B-4203 [2] NUT  
15. 1A-9252 [2] END  
16. 3S-7428 [1] SHAFT (Left Hand)  
17. 0S-1595 [3] BOLT  
18. 3B-4508 [6] LOCKWASHER  
19. 9M-2979 [1] SHAFT  
20. 1M-1291 [4] PIN  
21. 3B-4621 [4] COTTER PIN  
22. 0S-1585 [3] BOLT  
23. 4S-8063 [1] SHAFT (Right Hand)  
24. 9S-5689 [1] BRACKET (Right Hand)  
25. 8M-6775 [1] ROD (Right Hand)  
26. 3S-7861 [1] ROD (Right Hand)  
27. 8B-0868 [2] BOLT  
28. 3B-6734 [2] NUT  
29. 3B-4617 [2] COTTER PIN  
30. 9B-1648 [2] ROD  
31. 4H-3651 [2] NUT  
32. 1B-4206 [2] NUT  
33. 3S-7869 [1] SUPPORT ASSEM.  
  9F-2978 [4] NUT  
  1J-4798 [2] WASHER  
  5B-7793 [2] LUG  
    (Parts of 3S7869 Support Assem.)
 

#UEG0714S0097
 

1P-0993: STEERING CLUTCH HYDRAULIC CONTROL

STEERING CLUTCH HYDRAULIC CONTROL (1P993 N/S)--As Viewed from Right Hand Side of Machine-Part 2 of 2
Serial No. 98J1134 to 98J1556 inclusive
1P994 Booster parts are shown on Page 64
c129202 UEG0714S
1P0993 STEERING CLUTCH HYDRAULIC CONTROL Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0994 Y [1] BOOSTER GROUP  
    (See Separate Illustration)
2. 3S-8723 [1] SPOUT ASSEM.  
  5M-6687 [2] STUD  
    (Part of 3S8723 Spout Assem.)
3. 8S-5820 [1] BREATHER  
4. 9F-0825 [1] PLUG  
5. 0L-1124 [1] GASKET  
6. 0S-1594 [4] BOLT  
7. 3B-4506 [8] LOCKWASHER  
8. 3S-8645 [1] GASKET  
9. 5B-0651 [2] FITTING  
10. 3H-2598 [2] SCREW  
11. 1B-4204 [2] NUT  
12. 8H-1172 [2] TUBE ASSEM.  
13. 0L-0925 [2] SCREW  
14. 0L-1649 [2] LOCK  
15. 2S-2616 [2] SCREW  
16. 5M-3390 [4] LOCK  
17. 8M-4448 [4] SEAL  
18. 7B-8691 [2] YOKE ASSEM.  
  1A-7657 [2] BALL  
  7B-8690 [2] INSERT  
    (1 each in 7B8691 Yoke Assem.)
19. 0L-0829 [2] HANDLE  
20. 1D-5118 [2] NUT  
21. 8M-6772 [1] BAR  
22. 7B-8777 [2] LEVER  
23. 9M-5884 [2] BUMPER  
24. 2D-2285 [2] BOLT  
25. 1B-2578 [2] NUT  
26. 0S-0509 [2] BOLT  
27. 4B-4278 [4] WASHER  
28. 9S-5303 [2] LEVER  
29. 1B-0676 [4] PIN  
30. 3B-4615 [4] COTTER PIN  
31. 9M-3010 [2] ROD  
32. 0S-1588 [2] BOLT  
33. 3S-7865 [2] LEVER  
34. 1B-8706 [4] KEY  
35. 0T-0924 [2] BOLT  
36. 1B-4203 [2] NUT  
37. 3S-7854 [2] LEVER  
38. 1A-2029 [2] BOLT  
39. 0S-1584 [2] BOLT  
40. 9S-5304 [2] LEVER  
41. 2S-2615 [2] SCREW  
42. 7B-8778 [2] SHAFT  
43. 1B-8719 [2] KEY  
  Y   SEPARATE ILLUSTRATION
 

#UEG0714S0098
 

3S-8201: STEERING CLUTCH HYDRAULIC CONTROL

STEERING CLUTCH HYDRAULIC CONTROL (3S8201 N/S)--Top View-Part 1 of 2
Serial No. 98J1557-Up
c154943 UEG0714S
3S8201 STEERING CLUTCH HYDRAULIC CONTROL Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-0676 [4] PIN  
  3B-4615 [4] COTTER PIN  
2. 2S-8384 [2] LEVER  
  1B-8703 [2] KEY  
3. 5B-9079 [2] NUT  
4. 1F-5403 [2] END  
5. 0S-1591 [2] BOLT (.375 dia. n.c.)  
  1D-4717 [2] NUT  
    -OR-
  0T-0924 [2] BOLT (.375 dia. n.f.)  
  1B-4203 [2] NUT  
7. 3S-7862 [1] ROD (L.H.)  
8. 8M-6776 [1] ROD (L.H.)  
9. 3B-4631 [2] COTTER PIN  
10. 3S-7431 [1] SHAFT  
11. 9S-5690 C [1] BRACKET (L.H.)  
12. 6D-5974 C [12] BEARING  
13. 9S-4775 C [4] BEARING  
14. 8M-6772 C [2] BAR  
15. 1A-9252 [2] END  
16. 3S-7428 [1] SHAFT (L.H.)  
17. 0S-1595 [3] BOLT  
18. 3B-4508 [6] LOCKWASHER  
19. 9M-2979 [1] SHAFT  
20. 1M-1291 [4] PIN  
21. 3B-4621 [4] COTTER PIN  
22. 0S-1585 [3] BOLT  
23. 4S-8063 [1] SHAFT (R.H.)  
24. 9S-5689 C [1] BRACKET (R.H.)  
25. 8M-6775 [1] ROD (R.H.)  
26. 3S-7861 [1] ROD (R.H.)  
27. 8B-0868 [2] BOLT  
28. 3B-6734 [2] NUT  
29. 3B-4617 [2] COTTER PIN  
30. 9B-1648 [2] ROD  
31. 2B-0989 [2] NUT  
32. 1B-4206 [2] NUT  
33. 1B-4203 [2] NUT  
34. 3S-7869 [1] SUPPORT ASSEM.  
    (Includes)
  9F-2978 [4] NUT  
  1J-4798 [2] WASHER  
  5B-7793 [2] LUG  
  C   INDICATES CHANGE
 

#UEG0714S0099
 

3S-8201: STEERING CLUTCH HYDRAULIC CONTROL

STEERING CLUTCH HYDRAULIC CONTROL (3S8201 N/S)--As Viewed from R.H. Side of Machine-Part 2 of 2
Serial No. 98J1557-Up
3S8181 Booster parts are shown on Page 64A
c127477 UEG0714S
3S8201 STEERING CLUTCH HYDRAULIC CONTROL Parts scheme
  For full view, you need register

Parts for your D5 TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-8181 Y [1] BOOSTER GROUP  
    (See Separate Illustration)
2. 3S-8723 [1] SPOUT ASSEM.  
  5M-6687 [2] STUD  
    (Part of 3S8723 Spout Assem.)
3. 8S-5820 [1] BREATHER  
4. 9F-0825 [1] PLUG  
5. 0L-1124 [1] GASKET  
6. 0S-1594 [4] BOLT  
7. 3B-4506 [8] LOCKWASHER  
8. 3S-8645 [1] GASKET  
9. 5B-0651 [2] FITTING  
10. 3H-2598 [2] SCREW  
11. 1B-4204 [2] NUT  
12. 8H-1172 [2] TUBE ASSEM.  
13. 0L-0925 [2] SCREW  
14. 0L-1649 [2] LOCK  
15. 2S-2616 [2] SCREW  
16. 5M-3390 [4] LOCK  
17. 8M-4435 C [4] SEAL  
18. 7B-8691 [2] YOKE ASSEM.  
  1A-7657 [2] BALL  
  7B-8690 [2] INSERT  
    (1 each in 7B8691 Assem.)
19. 0L-0829 [2] HANDLE  
20. 1D-5118 [2] NUT  
21. 1B-8719 [2] KEY  
22. 7B-8777 [2] LEVER  
23. 9M-5884 [2] BUMPER  
24. 2D-2285 [2] BOLT  
25. 1B-2578 [2] NUT  
26. 0S-0509 [2] BOLT  
27. 4B-4278 [4] WASHER  
28. 9S-5303 C [2] LEVER  
29. 1B-0676 [4] PIN  
30. 3B-4615 [4] COTTER PIN  
31. 9M-3010 [2] ROD  
32. 0S-1588 [2] BOLT  
33. 3S-7865 [2] LEVER  
34. 1B-8706 [4] KEY  
35. 0T-0924 [2] BOLT  
36. 1B-4203 [2] NUT  
37. 3S-7854 [2] LEVER  
38. 1A-2029 [2] BOLT  
39. 0S-1584 [2] BOLT  
40. 9S-5304 C [2] LEVER  
41. 2S-2615 [2] SCREW  
42. 7B-8778 [2] SHAFT  
  C   INDICATES CHANGE FROM PREVIOUS
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Specifications
Final Drive
D5 (SA) TRACTOR POWER TRAIN
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Reusability of Planetary Final Drive Components for Track-Type Tractors {4050, 4084, 4092}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Salvage of Final Drive Sprocket Hubs For Pipelayers, Track Loaders, and Track-Type Tractors {4050, 4184}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Conventional (Non-Planetary) Final Drive Gears for Track Type Tractors and Track Type Loaders {4055, 7552}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Thermal Spray Procedures for TTT Sprocket Hub Bearing Bores {0374, 0599, 0679, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Instructions For Modification Of The 5P8630 Driver Head Which Is Part Of The 6V82 Final Drive Bearing Adjustment Tool Arrangement{0654,4050}
1980/10/20
Changes To Procedure For Alignment Of Track Roller Frames{0374,4150,4050}
1982/10/04
New Seal Groups Used At Final Drive Sprockets{4052}
1977/03/21
Higher Capacity Bearing Used On Final Drive Pinion{4091}
1978/10/30
Self-contained Filter Cart Evacuates Oil, Filters Oil and Refills System {0727}
2004/02/16
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Caterpillar Parts SIS Catalog D5 :

FINAL DRIVE GROUP
3S-8701 FINAL DRIVE GROUP
8S-2154 TRANSMISSION GP
TRANSMISSION GP
8S-2154 TRANSMISSION GP
UNIVERSAL JOINT GP
5S-0723 UNIVERSAL JOINT GP
UNIVERSAL JOINT GP
5S-0723 UNIVERSAL JOINT GP
3S-7095 CLUTCH GP-FLYWHEEL
3S-7095 CLUTCH GP-FLYWHEEL
CLUTCH GP-FLYWHEEL
3S-7095 CLUTCH GP-FLYWHEEL
BRAKES
3S-8202 BRAKES
3S-8202 BRAKES
BRAKE BAND ASSEMBLIES
6F-2688 BRAKE BAND ASSEMBLIES
STEERING CLUTCH GROUP
3S-6999 STEERING CLUTCH GROUP
STEERING CLUTCH GROUP
6P-4355 STEERING CLUTCH GROUP
STEERING CLUTCH HYDRAULIC CONTROL
1P-0993 STEERING CLUTCH HYDRAULIC CONTROL
1P-0993 STEERING CLUTCH HYDRAULIC CONTROL
STEERING CLUTCH HYDRAULIC CONTROL
3S-8201 STEERING CLUTCH HYDRAULIC CONTROL

Truck sale:

1980 CAT D550B
USD $19,800 
1980 CAT D550B

DON'S TRUCK & TRAILER SALES
Henryville, Indiana
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.