AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J5733 CYLINDER GROUP (9K3172 N/S) (Chg. 0)--5" Bore x 21.4" Stroke Part of 6K1284 Side Dump Bucket Arrangement listed on Page 174 966C


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-HYDRAULIC
LINES GP-FRONT

WHEEL LOADER 966C WHEEL LOADER 30K
 966C WHEEL LOADER 30K01625-02368 (MACHINE) POWERED BY 3306 ENGINE UEG0716S 966C 30K   (1967)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-LH
8J-5727 CYLINDER GP-LH
CYLINDER GROUP
3K-5200 CYLINDER GROUP
CYLINDER GROUP
8J-5733 CYLINDER GROUP
CYLINDER GROUP
5J-0156 CYLINDER GROUP
CYLINDER GROUP
5J-0156 CYLINDER GROUP
CYLINDER GROUP
5J-0156 CYLINDER GROUP
 

#UEG0716S0310
 

8J-5733: CYLINDER GROUP

8J5733 CYLINDER GROUP (9K3172 N/S) (Chg. 0)--5" Bore x 21.4" Stroke
Part of 6K1284 Side Dump Bucket Arrangement listed on Page 174
c144856 UEG0716S
8J5733 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8J-5734 [1] CYLINDER ASSEM.  
  4J-4616 [1] PISTON  
  2J-3950 [1] NUT  
  2K-0044 [1] ELBOW  
    (Part of 8J5734 Assem.)
  5P-0094 H [2] SEAL  
  7J-9699 [1] BEARING  
    (Part of 8J5734 Assem.)
  4J-4630 [1] RING  
  5J-5020 [2] SEAL ASSEM.  
  8J-5737 [1] ROD ASSEM.  
  2K-3739 [1] HEAD  
  5F-3144 [1] SEAL  
  2K-4096 [1] WASHER  
  1K-7112 [1] PACKING  
  1K-6981 [1] SEAL  
  5P-0065 H [2] SEAL  
  8J-5696 [1] BEARING  
    (Part of 8J5737 Assem.)
  0S-1585 [2] BOLT  
  1K-5579 [1] GLAND  
  1K-7033 [2] SHIM (.032 in. thick)  
  5J-0391 [3] SHIM (.010 in. thick)  
  2A-1538 [4] BOLT  
  H   NOT PART OF 8J5733 CYLINDER GR
 

#UEG0716S0311
 

5J-0156: CYLINDER GROUP

5J156 CYLINDER GROUP--5.50" Bore x 19.50" Stroke--Type 1
Part of 6K5516 966 Ripper-Scarifier Arrangement listed on Page 175
c78570 UEG0716S
5J0156 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2J-0564 [1] NUT  
  5J-4988 [2] SEAL ASSEM.  
  2K-4665 [1] ELBOW  
    (PART OF CYLINDER ASSEM. 5J181)
  0S-1588 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  2K-0190 [2] FLANGE  
  4J-4609 [1] PISTON  
  4J-4606 [1] RING  
  4K-3128 [2] BEARING  
    (PART OF CYLINDER ASSEM. 5J181)
  2H-9247 [1] SEAL  
  2K-2961 [1] WASHER  
  2K-7827 [1] HEAD  
  1K-7114 [1] PACKING (4 RINGS)  
  1A-8063 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  2K-2014 [1] GLAND  
  0S-1589 [2] BOLT  
  3B-4510 [2] LOCKWASHER  
  4J-4769 [1] ROD ASSEM.  
  2K-4507 [1] BEARING  
    (PART OF ROD ASSEM. 4J4769)
  1K-6982 [1] SEAL  
  2K-1891 [2] SHIM (.032" THICK)  
  5J-0389 [3] SHIM (.010" THICK)  
  5J-0181 [1] CYLINDER ASSEM.  
 

#UEG0716S0312
 

5J-0156: CYLINDER GROUP

5J156 CYLINDER GROUP (Change 4)--5.5" Bore x 19.5" Stroke--Type 2
Part of 6K5516 966 Ripper-Scarifier Arrangement listed on Pages 175 and 175B
c119878 UEG0716S
5J0156 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2J-0564 [1] NUT  
  5J-4988 [2] SEAL ASSEM.  
  2K-4665 [1] ELBOW  
    (PART OF CYLINDER ASSEM. 5J181)
  4J-4609 [1] PISTON  
  4J-4606 [1] RING  
  4K-3128 [2] BEARING  
    (PART OF CYLINDER ASSEM. 5J181)
  2H-9247 [1] SEAL  
  2K-2961 [1] WASHER  
  2K-7827 [1] HEAD  
  1K-7114 [1] PACKING (4 RINGS)  
  1A-8063 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  2K-2014 [1] GLAND  
  0S-1589 [2] BOLT  
  3B-4510 [2] LOCKWASHER  
  4J-4769 [1] ROD ASSEM.  
  2K-4507 [1] BEARING  
    (PART OF ROD ASSEM. 4J4769)
  1K-6982 [1] SEAL  
  2K-1891 [2] SHIM (.032" THICK)  
  5J-0389 [3] SHIM (.010" THICK)  
  5J-0181 [1] CYLINDER ASSEM.  
 

#UEG0716S0313
 

5J-0156: CYLINDER GROUP

5J156 CYLINDER GROUP (Change 5 & 6)--5.5" Bore x 19.5" Stroke--Type 3
Part of 6K5516 966 Ripper-Scarifier Arrangement listed on Pages 175 and 175B
c203863 UEG0716S
5J0156 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2J-0564 [1] NUT  
  5J-4988 [2] SEAL ASSEM.  
  2K-4665 [1] ELBOW  
    (PART OF CYLINDER ASSEM. 5J181)
  4J-4609 [1] PISTON  
  4J-4606 [1] RING  
  4K-3128 [2] BEARING  
    (PART OF CYLINDER ASSEM. 5J181)
  2H-9247 [1] SEAL  
  2K-2961 [1] WASHER  
  9J-4008 C [1] HEAD  
  1A-8063 [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  4J-4769 [1] ROD ASSEM.  
  2K-4507 [1] BEARING  
    (PART OF ROD ASSEM 4J4769)
  1K-6982 [1] SEAL  
  5J-0964 C [1] SEAL  
  5J-3620 C [1] SEAL  
  5J-0181 [1] CYLINDER ASSEM.  
  C   INDICATES CHANGE
 

#UEG0716S0314
 

5J-0156: CYLINDER GROUP

5J156 CYLINDER GROUP (Change 7)--5.5" Bore x 19.60" Stroke--Type 4
Part of 6K5516 966 Ripper-Scarifier Arrangement listed on Pages 175 and 175B
c160774 UEG0716S
5J0156 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2J-0564 [1] NUT  
  5J-4988 [2] SEAL ASSEM.  
  2K-4665 [1] ELBOW  
    (PART OF CYLINDER ASSEM. 5J181)
  4J-4609 [1] PISTON  
  4J-4606 [1] RING  
  4K-3128 [2] BEARING  
    (PART OF CYLINDER ASSEM. 5J181)
  2H-9247 [1] SEAL  
  2K-2961 [1] WASHER  
  9J-4008 [1] HEAD  
  1D-4608 C [4] BOLT  
  3B-4512 [4] LOCKWASHER  
  9J-5639 C [1] ROD ASSEM  
  2K-4507 [1] BEARING  
    (Part of Rod Assem. 9J5639)
  1K-6982 [1] SEAL  
  5J-0964 [1] SEAL  
  5J-3620 [1] SEAL  
  5J-0181 [1] CYLINDER ASSEM.  
  C   INDICATES CHANGE
 

#UEG0716S0315
 

6J-4513: CYLINDER GROUP

6J4513 CYLINDER GROUP
Part of 6K8574 Top Clamp Arrangement listed on Page 165
c112740 UEG0716S
6J4513 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-4517 [1] CYLINDER ASSEM.  
2. 2K-4507 [1] BEARING  
    (Part of 6J4517 Assem.)
3. 7J-2464 [1] HEAD  
4. 7J-2468 [1] ROD ASSEM.  
5. 2K-4507 [1] BEARING  
    (Part of 7J2468 Assem.)
6. 4J-3515 [1] SEAL  
7. 5J-8225 [1] SEAL  
8. 1D-4626 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
9. 2K-4096 [1] RING  
10. 5F-3144 [1] SEAL  
11. 7J-2466 [1] PISTON  
12. 5J-5020 [1] SEAL ASSEM.  
13. 4J-3420 [1] RING  
14. 5J-5731 [1] NUT  
15. 5J-3616 [1] SEAL  
16. 7J-2467 [1] WASHER  
 

#UEG0716S0316
 

8J-5755: CYLINDER GROUP

8J5755 CYLINDER GROUP (9k3176 N/S) (Chg. 0)--5.00" Bore x 19.38" Stroke--2 Required
Part of 6K8574 Top Clamp Arrangement listed on Page 165
AN ATTACHMENT
c147781 UEG0716S
8J5755 CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5756 [1] CYLINDER ASSEM.  
    (Includes)
2. 7J-9344 [1] BEARING  
3. 5P-0065 H [4] SEAL  
4. 8J-5759 [1] ROD ASSEM.  
    (Includes)
5. 7J-9344 [1] BEARING  
7. 5J-8225 [1] SEAL  
8. 1D-4626 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
9. 2K-4096 [1] RING  
10. 5F-3144 [1] SEAL  
11. 7J-2466 [1] PISTON  
12. 5J-5020 [1] SEAL ASSEM.  
13. 4J-3420 [1] RING  
14. 5J-5731 [1] NUT  
15. 5J-3616 [1] SEAL  
16. 7J-2467 [1] WASHER  
17. 7J-2464 [1] HEAD  
18. 4J-3515 [1] SEAL  
  H   NOT PART OF 8J5755 CYLINDER GR
 

#UEG0716S0317
 

9K-4067: LINES GP-HYDRAULIC

9K4067 HYDRAULIC LINES GROUP
Serial No. 76J6389 to 76J7034 inclusive and 30K1625 to 30K1769 inclusive
c141433 UEG0716S
9K4067 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
2. 9K-4065 [1] ELBOW  
  4H-9105 [1] SEAL  
3. 7K-1334 [1] HOSE  
4. 9M-5241 [4] CLAMP  
5. 9K-4066 [1] TUBE  
6. 4K-7979 [1] HOSE ASSEM. (32.75 in long)  
7. 4J-0524 [3] SEAL  
8. 5D-4177 [1] HOSE  
9. 9K-4063 [1] TUBE ASSEM.  
10. 0S-1585 [12] BOLT  
11. 3B-4508 [6] LOCKWASHER  
12. 1P-4579 [4] FLANGE  
13. 6K-6227 [1] BRACKET ASSEM.  
14. 1A-2029 [2] BOLT (1.125 in long)  
  3B-1915 [2] BOLT (1.375 in long)  
  1D-4717 [2] NUT  
  3B-4506 [4] LOCKWASHER  
  3L-9689 [4] WASHER  
15. 7K-6844 [1] TUBE ASSEM.  
16. 9S-8010 [1] PLUG  
  2S-4078 [1] SEAL  
17. 1A-5822 [2] BOLT  
 

#UEG0716S0318
 

9K-4067: LINES GP-HYDRAULIC

9K4067 HYDRAULIC LINES GROUP
Serial No. 76J7035-Up and 30K1770-Up
c145721 UEG0716S
9K4067 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
2. 9K-4065 [1] ELBOW  
  4H-9105 [1] SEAL  
3. 7K-1334 [1] HOSE  
4. 9M-5241 [4] CLAMP  
5. 9K-4066 [1] TUBE  
6. 1V-4835 C [1] HOSE ASSEM.  
    (Includes)
7. 5P-0183 H HOSE 65.90 cm(25.94 in.)  
8. 3S-8330 [2] SLEEVE  
9. 1P-1238 [1] STEM ASSEM. (straight)  
  3S-9330 [1] STEM ASSEM. (60 degrees)  
10. 0S-1585 [12] BOLT  
11. 3B-4508 [6] LOCKWASHER  
12. 1P-4579 [4] FLANGE  
13. 6K-6227 [1] BRACKET ASSEM.  
14. 1A-2029 [2] BOLT (1.125 in. long)  
  3B-1915 [2] BOLT (1.375 in. long)  
  1D-4717 [2] NUT  
  3B-4506 [4] LOCKWASHER  
  3L-9689 [4] WASHER  
15. 7K-6844 [1] TUBE ASSEM.  
    (Includes)
16. 9D-8010 [1] PLUG  
  2S-4078 [1] SEAL  
17. 1A-5822 [2] BOLT  
18. 4J-0524 [3] SEAL  
19. 5D-4177 [1] HOSE  
20. 9K-4063 [1] TUBE ASSEM.  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0716S0319
 

9K-1119: LINES GP-HYDRAULIC

9K1119 FRONT HYDRAULIC LINES GROUP--Part 1 of 2
Part of 8K5558, 8K5559, 8K5595 and 8K5596 Hydraulic Arrangements listed on Page 99
4K4895 Joint parts are shown on Page 134
c211443 UEG0716S
9K1119 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 966C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1591 [8] BOLT  
2. 3B-4506 [16] LOCKWASHER  
3. 4K-4986 [4] SEAL  
4. 4K-4987 [2] SEAT  
5. 4K-4895 Y [2] SWIVEL JOINT GROUP  
    (Separate Illustration)
6. 6K-4624 [1] BRACKET  
7. 1A-2029 [3] BOLT  
8. 0S-1585 [2] BOLT  
  4B-4280 [2] WASHER  
9. 1D-4719 [6] NUT  
10. 3B-4508 [10] LOCKWASHER  
11. 5K-3340 [2] BRACKET  
12. 1K-7063 [2] "U" BOLT  
  1D-4717 [4] NUT  
13. 4B-4278 [5] WASHER  
14. 5K-3347 [2] ANGLE  
15. 5K-3555 [1] TUBE ASSEM.  
16. 3K-2943 [2] CLAMP  
17. 5K-3553 [1] TUBE ASSEM.  
  5K-3338 [1] BAR  
18. 9K-0713 [1] TUBE ASSEM.  
19. 9S-4190 [2] PLUG  
  2M-9780 [2] SEAL  
20. 4J-5573 [2] SEAL  
21. 1A-1460 [4] BOLT  
22. 9K-0711 [1] TUBE ASSEM.  
23. 7K-8947 [1] BRACKET (R.H.)  
24. 0S-1587 [4] BOLT  
25. 7K-8948 [1] BRACKET (L.H.)  
26. 0L-1351 [1] BOLT  
27. 7K-8894 [1] TUBE ASSEM.  
28. 6K-5535 C [1] CLIP ASSEM.  
  6K-5536 C [1] BRACKET  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation Of Tilt Cylinder Link Assembly Oversize Bearings{6119}
Installation Of Tilt Cylinder Link Assembly Oversize Bearings{6119}
Installation Of Tilt Cylinder Link Assembly Oversize Bearings{6119}
Installation Of Tilt Cylinder Link Assembly Oversize Bearings{6119}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders
966C WHEEL LOADER HYDRAULIC SYSTEM
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Positioner Master Cylinder
966 WHEEL LOADER VEHICLE SYSTEMS
Lift Cylinders
966 WHEEL LOADER VEHICLE SYSTEMS
Tilt Cylinders
966 WHEEL LOADER VEHICLE SYSTEMS
Service Magazine
Smaller Diameter Piston Used In Tilt Cylinders{5104}
1978/03/20
Use Earlier Rod Bearings For Lift Cylinders To Prevent Failures{5102}
1978/12/04
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 966C :

CYLINDER GROUP
3K-5200 CYLINDER GROUP
CYLINDER GP-LH
8J-5727 CYLINDER GP-LH
CYLINDER GP-RH
8J-5726 CYLINDER GP-RH
CYLINDER GROUP--R.H.,CYLINDER GROUP--L.H.
3K-0482 CYLINDER GROUP--R.H.,CYLINDER GROUP--L.H.
3K-0481 CYLINDER GROUP--R.H.,CYLINDER GROUP--L.H.
CYLINDER GP-TILT
7J-9364 CYLINDER GP-TILT
CYLINDER GP-TILT
7J-9363 CYLINDER GP-TILT
CYLINDER GP-LIFT
9J-2434 CYLINDER GP-LIFT
CYLINDER GROUP
5J-0156 CYLINDER GROUP
CYLINDER GROUP
5J-0156 CYLINDER GROUP
CYLINDER GROUP
5J-0156 CYLINDER GROUP
CYLINDER GROUP
5J-0156 CYLINDER GROUP
CYLINDER GROUP
6J-4513 CYLINDER GROUP
CYLINDER GROUP
8J-5755 CYLINDER GROUP
LINES GP-HYDRAULIC
9K-4067 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
9K-4067 LINES GP-HYDRAULIC

Truck sale:

Caterpillar 966C
 
Caterpillar 966C
- Wheel Loaders
PETERSON TRACTOR CO
Caterpillar 966C, Wheel Loaders, Construction
30,547 
Caterpillar 966C, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
31,209 
Caterpillar 966C, Wheel Loaders, Construction


Caterpillar 966C, Wheel Loaders, Construction
35,551 
Caterpillar 966C, Wheel Loaders, Construction

FINNING CANADA
Caterpillar 966C, Wielladers, Bouw
28.000 
Caterpillar 966C, Wielladers, Bouw
- Wheel loaders
MICHIGAN CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.