SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITSBASIC ENGINE
PARTS GP-MISCELLANEOUSFUEL SYSTEM
CONTROL GP-GOVERNORLINES GP-FUEL
LUBRICATION SYSTEM
FILLER GP-ENGINE OILELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGSERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS#UEG0718S0020
GASKET KITS
GASKET KITS
#UEG0718S0021
2S-6981: PARTS GP-MISCELLANEOUS
ENGINE MOUNTED HARDWARE (2S6981 N/S)
Parts for your 12F MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1A-8537 | [4] | BOLT- SUPPORT TO FRAME ASSEMBLY | ||
| 3B-4506 | [1] | LOCKWASHER -BRACKET TO CLAMP | ||
| 3B-4510 | [4] | LOCKWASHER- SUPPORT TO FRAME ASSEMBLY | ||
| 1D-4717 | [1] | NUT -BRACKET TO CLAMP | ||
| 1D-4720 | [4] | NUT -BOLT TO FRAME ASSEMBLY | ||
| 1L-3661 | [1] | CLAMP- PIPE TO BRACKET | ||
| 7M-7388 | [1] | PIPE- FLYWHEEL HOUSING OIL DRAIN TO COVER ASSEMBLY | ||
| 7M-7602 | [1] | BRACKET -CLIP TO PLATE | ||
| 0S-0509 | [1] | BOLT -BRACKET TO CLAMP | ||
| 1S-5761 | [4] | SHIM -SUPPORT TO FRAME | ||
| 1S-5762 | [4] | SHIM -SUPPORT TO FRAME | ||
| 1S-5763 | [4] | SHIM -SUPPORT TO FRAME |
#UEG0718S0022
6D-3700: GOVERNOR CONTROL
GOVERNOR CONTROL (6D3700 N/S)--Part 1 of 2
Parts for your 12F MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-5708 | [1] | LEVER | |
| 2. | 3K-4290 | [2] | BALL JOINT | |
| 3. | 2M-2830 | [1] | ROD | |
| 4. | 6D-0475 | [1] | LINK ASSEM. | |
| 5. | 5B-9079 | [3] | NUT | |
| 6. | 1B-4203 | [3] | NUT | |
| 7. | 3B-4506 | [4] | LOCKWASHER | |
| 8. | 1A-2029 | [4] | BOLT | |
| 9. | 5D-4103 | [1] | BRACKET ASSEM. | |
| 10. | 5D-4101 | [1] | BEARING | |
| (Part of 5D4103 Bracket Assem.) | ||||
| 11. | 6D-0746 | [1] | BRACKET ASSEM. | |
| 12. | 5D-4101 | [1] | BEARING | |
| (Part of 6D746 Bracket Assem.) | ||||
| 13. | 6H-1717 | [2] | BOLT | |
| 14. | 3B-4508 | [2] | LOCKWASHER | |
| 15. | 6D-5861 | [1] | LEVER | |
| 16. | 5D-4104 | [1] | SHAFT | |
| 17. | 1B-8704 | [5] | KEY | |
| 18. | 2A-4996 | [1] | BOLT | |
| 19. | 4B-2152 | [1] | BOLT | |
| 20. | 1B-4201 | [1] | NUT | |
| 21. | 3B-8485 | [1] | FITTING | |
| 22. | 6D-6046 | [1] | ROD ASSEM. | |
| 23. | 9S-1303 C | [2] | PIN | |
| 24. | 3B-4607 | [3] | COTTER PIN | |
| 25. | 3B-3551 | [1] | LEVER | |
| 26. | 1A-2457 | [1] | PIN | |
| 27. | 3D-9609 | [1] | END | |
| 28. | 1A-8285 | [2] | NUT | |
| 29. | 6D-3449 | [1] | ROD | |
| 30. | 4F-1001 | [1] | END | |
| 31. | 5D-8444 | [1] | LEVER | |
| 32. | 6D-5707 | [1] | LEVER | |
| 33. | 0S-1591 | [1] | BOLT | |
| 34. | 1D-4717 | [1] | NUT | |
| 35. | 1B-4669 | [1] | COLLAR | |
| 36. | 4B-3574 | [1] | SETSCREW | |
| 37. | 1B-2578 | [1] | NUT | |
| 38. | 6D-3453 | [1] | SHAFT | |
| 39. | 3B-8489 | [2] | FITTING | |
| C | INDICATES CHANGE FROM PREVIOUS | |||
#UEG0718S0023
6D-3700: GOVERNOR CONTROL
GOVERNOR CONTROL (6D3700 N/S)--Part 2 of 2
Parts for your 12F MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-5117 | [3] | NUT | |
| 2. | 4H-2186 | [1] | TREADLE ASSEM. | |
| 3H-3244 | [1] | SPACER | ||
| (Part of 4H2186 Assem.) | ||||
| 3. | 3B-1915 | [4] | BOLT | |
| 4. | 1D-4717 | [8] | NUT | |
| 5. | 3B-4506 C | [12] | LOCKWASHER | |
| 6. | 4D-9408 | [1] | SHAFT | |
| 7. | 1B-8706 | [2] | KEY | |
| 8. | 6D-7885 | [2] | PLATE | |
| 9. | 6D-7884 | [2] | BEARING ASSEM. | |
| 10. | 6D-5923 | [1] | LEVER | |
| 11. | 6D-3446 | [1] | TREADLE ASSEM. | |
| 12. | 5B-2208 | [1] | BOLT | |
| 13. | 3D-4559 | [1] | TUBE ASSEM. | |
| 14. | 6D-6045 | [1] | ROD ASSEM. | |
| 15. | 6B-7589 | [1] | SPRING | |
| 16. | 2D-6417 | [1] | RING | |
| 17. | 9S-1303 | [2] | PIN | |
| 18. | 3B-4607 | [4] | COTTER PIN | |
| 19. | 4B-4278 | [4] | WASHER | |
| 20. | 1A-2457 | [1] | PIN | |
| 21. | 4B-5273 | [1] | WASHER | |
| 22. | 5B-2551 | [1] | DISC | |
| 23. | 5D-0992 | [1] | PLATE ASSEM. | |
| 4F-8686 | [1] | BEARING | ||
| (Part of 5D992 Plate Assem.) | ||||
| 24. | 1A-2029 | [3] | BOLT | |
| 25. | 5M-9788 | [1] | NUT | |
| 26. | 6D-7203 | [1] | BRACKET ASSEM. | |
| 27. | 0S-1573 | [2] | BOLT | |
| 28. | 3B-4508 | [2] | LOCKWASHER | |
| 29. | 5D-1005 | [1] | RETAINER | |
| 30. | 4J-6580 | [1] | WASHER | |
| 31. | 0L-0829 | [1] | HANDLE | |
| 32. | 7D-1605 C | [1] | HANDLE | |
| 33. | 3B-1915 | [3] | BOLT | |
| 34. | 0L-0821 | [1] | RETAINER | |
| 35. | 5D-0998 | [6] | SPRING | |
| 36. | 7D-3362 C | [1] | ROD ASSEM. | |
| 37. | 5B-2279 | [1] | ROD END | |
| 38. | 1B-7238 | [1] | ROD END | |
| (Parts of 7D3362 Assem.) | ||||
| 39. | 4H-1224 | [1] | TUBE ASSEM. | |
| 40. | 0S-1571 | [1] | BOLT | |
| 41. | 4H-1232 | [1] | LEVER | |
| 42. | 5B-1133 | [1] | PIN | |
| 43. | 4H-2584 | [1] | LEVER ASSEM. | |
| 4H-1240 | [1] | BUSHING | ||
| (Part of 4H2584 Lever Assem.) | ||||
| 44. | 0S-1594 | [2] | BOLT | |
| 45. | 3B-4615 | [1] | COTTER PIN | |
| 4B-1040 | [1] | WASHER | ||
| 46. | 6D-3452 | [1] | BRACKET ASSEM. | |
| 47. | 4H-1271 | [1] | PIN | |
| (Part of 6D3452 Bracket Assem.) | ||||
| 48. | 2D-2285 | [2] | BOLT | |
| 1B-2578 | [2] | NUT | ||
| 49. | 4F-1001 | [1] | END | |
| 50. | 1A-8285 | [1] | NUT | |
| 51. | 3D-2193 | [1] | RETAINER | |
| 52. | 4F-9059 | [1] | SEAL | |
| 53. | 2D-6416 | [1] | WASHER | |
| 54. | 4D-9469 | [1] | SPRING | |
| C | INDICATES CHANGE FROM PREVIOUS | |||
#UEG0718S0024
7D-1050: FUEL LINES
FUEL LINES (7D1050 N/S)
Parts for your 12F MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8999 | [1] | FITTING | |
| 8F-8997 | [1] | NUT | ||
| (Part of 3B8999 Fitting) | ||||
| 2. | 4S-8457 H | TUBE (.375" O.D.) 44.49" | ||
| 3. | 7B-1597 | [1] | CLIP | |
| 4. | 9M-8406 | [4] | CLIP | |
| 5. | 0S-1594 | [4] | BOLT | |
| 3B-4506 | [4] | LOCKWASHER | ||
| 6. | 8B-4509 | [1] | FITTING | |
| 8F-8997 | [1] | NUT | ||
| (Part of 8B4509 Fitting) | ||||
| 7. | 6B-2982 | [1] | TEE | |
| 8. | 7D-1047 | [2] | HOSE ASSEM. (45.38" long overall) | |
| 9. | 4K-8302 | [2] | CLIP | |
| 10. | 0S-1621 | [1] | BOLT | |
| 3B-4508 | [1] | LOCKWASHER | ||
| 11. | 3B-7255 | [2] | BUSHING | |
| 12. | 2D-5802 | [2] | VALVE | |
| H | ORDER BY THE FOOT | |||
#UEG0718S0025
2P-6854: FILLER GP-OIL
2P6854 OIL FILLER GROUP
Also part of 9D2280 Vandalism Protection Arrangement listed
on Page 254
Also part of 9D2280 Vandalism Protection Arrangement listed
on Page 254
Parts for your 12F MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2P-2720 | [1] | GASKET | |
| 2. | 0S-1588 C | [2] | BOLT | |
| 3. | 2P-2721 | [1] | PIPE ASSEM. | |
| 2P-2719 | [1] | PIPE | ||
| 4. | 8S-4212 | [1] | RIVET | |
| 5. | 2P-2717 | [1] | HASP | |
| 6. | 6N-2985 C | [1] | CAP ASSEM. | |
| 7. | 5M-2894 C | [2] | WASHER | |
| 8S-7949 H | PADLOCK GROUP | |||
| (Includes) | ||||
| 8M-0439 | [2] | KEY | ||
| (May Be Obtained From Parts Department | ||||
| C | INDICATES CHANGE | |||
| H | NOT PART OF 2P6854 OIL FILLER | |||
#UEG0718S0026
9D-1460: ALTERNATOR AR
9D1460 ALTERNATOR ARRANGEMENT--24 Volt, 50 Ampere--Factory Installation
AN ATTACHMENT
AN ATTACHMENT
Parts for your 12F MOTOR GRADER:
CATERPILLAR SIS#UEG0718S0027
9S-6693: ALTERNATOR GP-CHARGING
9S6693 ALTERNATOR GROUP--Factory Installation
Part of 9D1460 Alternator Arrangement
Part of 9D1460 Alternator Arrangement
Parts for your 12F MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5S-9088 RY | [1] | ALTERNATOR ASSEMBLY | ||
| 5M-6214 | [1] | PIPE PLUG -CYLINDER BLOCK | ||
| Oil Pressure | ||||
| 9S-6129 | [1] | PULLEY -ALTERNATOR DRIVE | ||
| 1H-6936 | [1] | WIRE ASSEMBLY- ALTERNATOR TO ENGINE | ||
| 9F-9353 | [1] | TERMINAL | ||
| 9F-5320 | [1] | TERMINAL | ||
| 8B-0653 | [2] | INSULATOR | ||
| R | REMFG PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#UEG0718S0028
5S-9088: ALTERNATOR GP-CHARGING
5S9088 ALTERNATOR ASSEMBLY--Part 1 of 2
Part of 9S6693 Alternator Group listed on Page 25
Part of 9S6693 Alternator Group listed on Page 25
Parts for your 12F MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-2260 | [1] | PLATE | |
| 2. | 9S-2544 | [4] | SCREW | |
| 3. | 8H-0878 | [6] | LOCKWASHER | |
| 4. | 9S-2438 | [2] | SCREW | |
| 5. | 7H-2079 | [7] | LOCKWASHER | |
| 6. | 9S-2255 | [1] | COVER | |
| 7. | 9S-2262 | [1] | GASKET | |
| 8. | 9S-2246 | [1] | LEAD ASSEM. | |
| 9. | 9S-9830 | [1] | SCREW | |
| 10. | 8F-1326 | [3] | WASHER | |
| 11. | 9B-7233 | [3] | LOCKWASHER (Shake Proof) | |
| 12. | 9S-9829 | [1] | SCREW ASSEM. | |
| 13. | 4B-2043 | [4] | NUT | |
| 14. | 9S-2259 | [1] | REGULATOR | |
| 15. | 9S-2250 | [1] | GROMMET | |
| 16. | 9S-2011 | [1] | SCREW | |
| 17. | 1L-4789 | [1] | LOCKWASHER | |
| 18. | 9S-2389 | [1] | STUD ASSEM. | |
| 19. | 9S-2398 | [1] | HOUSING ASSEM. | |
| 20. | 9S-2393 | [3] | DIODE | |
| 21. | 9S-2397 | [1] | COVER | |
| 22. | 9F-2247 | [1] | PLUG | |
| 23. | 9S-2395 | [1] | BEARING | |
| 24. | 9S-2394 | [1] | SEAL | |
| 25. | 9S-2396 | [1] | BUSHING | |
| 26. | 9S-2007 | [3] | SCREW | |
| 27. | 9S-2301 | [1] | INSULATION | |
| 28. | 9S-2292 | [1] | HEAT SINK ASSEM. | |
| 29. | 9S-2300 | [4] | INSULATOR | |
| 30. | 9S-2440 | [4] | SCREW | |
| 9S-2247 | [4] | WASHER (Spring) | ||
| 4B-4863 | [4] | WASHER (Plain) | ||
| 31. | 9S-2542 | [1] | SCREW | |
| 32. | 9S-2437 | [5] | SCREW | |
| 9S-2013 H | [1] | KIT (Terminal Relay) | ||
| (Consists of Bushing, "O" Ring & Hardware) | ||||
| 9S-2012 H | [1] | KIT (Terminal Output) | ||
| (Consists of Gaskets, Terminal & Hardware) | ||||
| 9S-2290 H | [1] | KIT (Heat Sink) | ||
| (Diode Junction Hardware) | ||||
| 9S-2291 H | [1] | KIT (Heat Sink) | ||
| (Positive Diode Hardware) | ||||
| H | NOT PART OF 5S9088 ALTERNATOR | |||
#UEG0718S0029
5S-9088: ALTERNATOR GP-CHARGING
5S9088 ALTERNATOR ASSEMBLY--Part 2 of 2
Part of 9S6693 Alternator Group listed on Page 25
Part of 9S6693 Alternator Group listed on Page 25
Parts for your 12F MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-2242 | [1] | RACE | |
| 2. | 9S-2248 | [1] | FIELD COIL AND SUPPORT ASSEM. | |
| 3. | 9S-2004 | [1] | STATOR ASSEM. | |
| 4. | 9S-2006 | [1] | INSULATOR | |
| 5. | 9S-2005 | [1] | GROMMET | |
| 6. | 9S-2014 | [3] | CLIP | |
| 7. | 9S-2302 | [1] | ROTOR ASSEM. | |
| 8. | 9S-2390 | [1] | RETAINER ASSEM. | |
| 9. | 9S-2391 | [1] | SEAL | |
| 10. | 9S-2256 | [1] | GASKET | |
| 11. | 9S-2261 | [1] | COLLAR | |
| 12. | 2F-5721 | [1] | BEARING | |
| 13. | 2P-5616 | [1] | FRAME | |
| 14. | 3B-4502 | [4] | LOCKWASHER | |
| 15. | 9S-2009 | [4] | BOLT | |
| 16. | 9S-2391 | [1] | SEAL | |
| 17. | 9S-2254 | [1] | COLLAR | |
| 18. | 9S-2252 | [1] | SLINGER | |
| 19. | 9S-2008 | [4] | SCREW | |
| 20. | 9S-2258 | [1] | FAN AND BAFFLE ASSEM. | |
| 21. | 7F-7621 | [1] | WASHER | |
| 22. | 2K-4821 | [1] | LOCKNUT |
Information:
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS
Truck Engine News
Engine News
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Magazine
Caterpillar Parts SIS Catalog 12F :
Truck sale:
149.800




