AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3406 INDUSTRIAL ENGINE 90U00001-00439 LUBRICATION SYSTEM Caterpillar SIS



INDUSTRIAL ENGINE 3406 INDUSTRIAL ENGINE 90U
 3406 INDUSTRIAL ENGINE 90U00001-00439 UEG0728S 3406 90U   (1973)

Parts group 3406:

  For full view, you need register
LUBRICATION SYSTEM
BREATHER GP
BREATHER GP
2N-8220 BREATHER GP
2N8220 BREATHER GROUP
FILLER GP-ENGINE OIL
OIL FILLER GROUP
8N-1455 OIL FILLER GROUP
8N1455 OIL FILLER GROUP
NOT FOR USE WITH 7N6640 AND 7N6641 COOLANT FILTER GROUPS
AN ATTACHMENT
FILLER GP-OIL
6N-1016 FILLER GP-OIL
6N1016 OIL FILLER GROUP
AN ATTACHMENT
FILLER GP-OIL
7N-8488 FILLER GP-OIL
7N8488 OIL FILLER GROUP--R.H. Front
FOR USE WITHOUT BELT TIGHTENER. NOT FOR USE WITH 7N8085
TRANSMISSION OIL COOLER. AN ATTACHMENT
FILTER GP-ENGINE OIL
FILTER GP-OIL
4N-0731 FILTER GP-OIL
4N731 OIL FILTER GROUP
Part of 4N2238 Basic Engine Arrangement listed on Pages 14 and 15A
OIL FILTER GROUP
4N-7254 OIL FILTER GROUP
4N7254 OIL FILTER GROUP--Type 1
Replaced by 6N8789 shown on Page 39B
AN ATTACHMENT
OIL FILTER GROUP
4N-7254 OIL FILTER GROUP
4N7254 OIL FILTER GROUP--Type 2
Replaced by 6N8789 shown on Page 39B
AN ATTACHMENT
FILTER GP-OIL
6N-8789 FILTER GP-OIL
6N8789 OIL FILTER GROUP--Type 1
AN ATTACHMENT
FILTER GP-OIL
6N-8789 FILTER GP-OIL
6N8789 OIL FILTER GROUP--Type 2
AN ATTACHMENT
FUMES DISPOSAL GP
FUMES DISPOSAL GP
4N-1288 FUMES DISPOSAL GP
4N1288 FUMES DISPOSAL GROUP
5N-6134 FUMES DISPOSAL GP
5N6134 FUMES DISPOSAL GROUP--Enclosure
Provides a fumes disposal hose from the fumes disposal tube of engine to outside of
the package generator set. AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
GAUGE GP-OIL LEVEL (DIPSTICK)
6N-2282 GAUGE GP-OIL LEVEL (DIPSTICK)
6N2282 OIL LEVEL GAUGE GROUP
GAUGE GP-OIL LEVEL (DIPSTICK)
7N-8084 GAUGE GP-OIL LEVEL (DIPSTICK)
7N8084 OIL LEVEL GAUGE GROUP
FOR USE WITH 7N7085 TRANSMISSION OIL COOLER GROUP SHOWN ON
PAGE 50B. CANNOT BE USED WITH FRONT SUMP OIL PAN OR ENGINES WITH
WATERCOOLED MANIFOLDS. AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-9951 GAUGE GP-OIL LEVEL (DIPSTICK)
4N9951 OIL LEVEL GAUGE GROUP--L.H.--Type 1
AN ATTACHMENT
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-9951 GAUGE GP-OIL LEVEL (DIPSTICK)
4N9951 OIL LEVEL GAUGE GROUP--L.H.--Type 2
AN ATTACHMENT
LINES GP-ENGINE OIL
LINES GP-ENGINE OIL
4N-1128 LINES GP-ENGINE OIL
4N1128 OIL LINES GROUP
Serial No. 90U1 to 90U297 inclusive
Part of 4N2238 Basic Engine Arrangement listed on Page 14. Only separate parts serviced
LINES GP-ENGINE OIL
4N-1128 LINES GP-ENGINE OIL
4N1128 OIL LINES GROUP
Serial No. 90U298-Up
LINES GP-DRAIN
5N-6131 LINES GP-DRAIN
5N6131 OIL DRAIN LINES GROUP
FOR USE WITH WIDE BASE WITH OR WITHOUT ENCLOSURES
AN ATTACHMENT
LINES GP-DRAIN
5N-3874 LINES GP-DRAIN
5N3874 OIL DRAIN LINES GROUP
FOR USE WITH 3N6287 ENGINE BASE GROUP SHOWN ON PAGE 141A
AN ATTACHMENT
LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4N-5394 LINES GP-TURBOCHARGER OIL
4N5394 TURBOCHARGER OIL LINES GROUP
Part of 4N2238 Basic Engine Arrangement listed on Pages 15 and 15B
LINES GP-TURBOCHARGER OIL
4N-4073 LINES GP-TURBOCHARGER OIL
4N4073 TURBOCHARGER OIL LINES GROUP--Type 1
Part of 4N6191 and 6N460 Engine Procurement Arrangements
listed on Pages 16 and 16A
LINES GP-TURBOCHARGER OIL
4N-4073 LINES GP-TURBOCHARGER OIL
4N4073 TURBOCHARGER OIL LINES GROUP--Type 2
Part of 4N6191 and 6N460 Engine Procurement Arrangements
listed on Pages 16 and 16A
LINES GP-TURBOCHARGER OIL
4N-4073 LINES GP-TURBOCHARGER OIL
4N4073 TURBOCHARGER OIL LINES GROUP--Type 3
PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
4N-0733 PUMP GP-ENGINE OIL
4N733 OIL PUMP GROUP
FASTENER GP-OIL PUMP MOUNTING
4N-2481 FASTENER GP-OIL PUMP MOUNTING
4N2481 OIL PUMP MOUNTING FASTENER GROUP
Part of 4N2238 Basic Engine Arrangement listed on Pages 14 and 15A

Information:

(For parts list, see above)

Specifications
Breather Cap
3406 INDUSTRIAL & MARINE ENGINES
Engine News
New Rack Shutoff Solenoid Available
1983/03/16
New Fuel Shutoff Solenoid Assembly Used
1988/11/01
Improved Air Pipe And New Valve Assembly Used In Air Shut-Off Group
1992/01/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Installation of 5L8984, 3N584 and 8N1571 Solenoid Shutoff Groups{1259}
Engine News
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed
1980/11/12
New Support Prevents Vibration Of Left Side Oil Filters
1981/09/16
Plate Added To Hold Oil Lines In Adapter For Left Side Oil Filter
1981/12/16
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper
1986/03/01
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install
1987/02/01
New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01
Installation Procedure For 1R-0716 Engine Oil Filter {1318}
1994/06/01
New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01
New Tube Assemblies For Turbocharger Oil Lines; New Base Assemblies For Oil Filters
1977/09/07
New High Efficiency Oil Filters are Now Available {1308}
2004/03/01
Service Letter-NACD
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Oil Filter (Industrial)
3406 INDUSTRIAL & MARINE ENGINES
Oil Filter (Marine)
3406 INDUSTRIAL & MARINE ENGINES
Oil Cooler Bypass Valve
3406 INDUSTRIAL & MARINE ENGINES
Service Letter-China
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
The 2P4005 Lube Filter Needs To Be Removed From Dealer Inventory
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Oil Filter Base
3406 INDUSTRIAL & MARINE ENGINES
Oil Cooler
3406 INDUSTRIAL & MARINE ENGINES
Service Magazine
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed{1315,1302}
1980/11/17
New Support Prevents Vibration Of Left Side Oil Filters{1306,1318}
1981/09/07
Plate Added To Hold Oil Lines In Adapter For Left Side Oil Filter{1306,1307}
1981/11/23
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Engine Maintenance Information Films Available{1318,1352,0375}
1983/09/05
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up {4450}
1986/07/28
New Tube Assemblies For Turbocharger Oil Lines; New Base Assemblies For Oil Filters{1052,1306,1307}
1977/08/29
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Some 2P4005 Oil Filter Assemblies May Be Difficult To Install{1318}
1987/02/16
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Engine News
Changes To Oil Level Gauge Group Improve Accuracy Of Oil Level Indications
1980/05/14
Service Magazine
Changes To Oil Level Gauge Group Improve Accuracy Of Oil Level Indications, Increase Oil Capacity Of 245 Excavators And Front Shovels{1300}
1980/05/12
Engine News
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group
1979/03/07
Plate Added To Hold Oil Lines In Adapter For Left Side Oil Filter
1981/12/16
New Drain Plug And O-ring Seal Used In Oil Pan Groups
1991/05/01
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans
1991/06/01
New Tube Assemblies For Turbocharger Oil Lines; New Base Assemblies For Oil Filters
1977/09/07
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
Special Instruction
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Plate Added To Hold Oil Lines In Adapter For Left Side Oil Filter{1306,1307}
1981/11/23
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
Repair Of Drain Plug Threads In Oil Pan{1302}
1984/04/23
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
New Drain Plug And O-ring Seal Used In Oil Pan Groups{1302,7553,7555}
1991/05/06
New Oil Drain Assembly Used; Be Sure To Correctly Tighten Drain Plugs, Port Plugs, And Pipe Plugs In Oil Pans{1302}
1991/06/03
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Engine News
New Tube Assemblies For Turbocharger Oil Lines; New Base Assemblies For Oil Filters
1977/09/07
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
New Tube Assemblies For Turbocharger Oil Lines; New Base Assemblies For Oil Filters{1052,1306,1307}
1977/08/29
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Engine News
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group
1979/03/07
Changes To Oil Level Gauge Group Improve Accuracy Of Oil Level Indications
1980/05/14
Visual Checks And Easy Tests Can Be Of Assistance When Troubleshooting Coolant Leakage Into The Lubrication System
1980/07/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed
1980/11/12
New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01
New Tube Assemblies For Turbocharger Oil Lines; New Base Assemblies For Oil Filters
1977/09/07
Precision Oil Pump Bearings Now Available
1977/11/09
Specifications
Oil Pump
3406 INDUSTRIAL & MARINE ENGINES
Oil Filter (Industrial)
3406 INDUSTRIAL & MARINE ENGINES
Gauges For Engine Oil Pressure
3406 INDUSTRIAL & MARINE ENGINES
Sending Units For Oil Pressure<BR> 5L7450 Sending Unit 12V, 24V or 32V systems
3406 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Oil Filter Base
3406 INDUSTRIAL & MARINE ENGINES
Oil Pump
3406 INDUSTRIAL & MARINE ENGINES
Sump Pump
3406 INDUSTRIAL & MARINE ENGINES
Service Magazine
Changes To Oil Level Gauge Group Improve Accuracy Of Oil Level Indications, Increase Oil Capacity Of 245 Excavators And Front Shovels{1300}
1980/05/12
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed{1315,1302}
1980/11/17
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1980/12/01
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1981/02/16
New Support Prevents Vibration Of Left Side Oil Filters{1306,1318}
1981/09/07
Plate Added To Hold Oil Lines In Adapter For Left Side Oil Filter{1306,1307}
1981/11/23
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Remanufactured Oil Pumps Available{1304}
1984/06/04
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up {4450}
1986/07/28
Precision Oil Pump Bearings Now Available{1304}
1977/11/07
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group{1318,1307}
1979/02/05
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Engine News
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed
1980/11/12
Different O-Ring Seal Now Used On The Oil Pump Suction Tube
1980/12/10
Different O-Ring Seal Now Used On The Oil Pump Suction Tube
1981/04/01
Remanufactured Oil Pumps Available
1984/06/20
New Oil Pump Gears Used
1986/07/01
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up
1986/08/01
Precision Oil Pump Bearings Now Available
1977/11/09
Different Housings are Used on 3400 Remanufactured Engines {1304}
2007/04/09
Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304}
Identifying Oil Pumps on Certain 3400, C27, and C32 Engines {1304}
Special Instruction
Installation of 0R0918 Remanufactured Oil Pump{1304, 7754}
Installation of 0R0918 Remanufactured Oil Pump{1304, 7754}
3400 Engine Oil Pumps{1304}
3400 Engine Oil Pumps{1304}
Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304}
Assembly Instruction for the New 3400 Oil Pump Body Serviced Assembly{1304}
Technical Information Bulletin
Remanufactured Oil Pumps May Have a Shallow Suction Tube Port on Certain 3400 Engines{1304}
Remanufactured Oil Pumps May Have a Shallow Suction Tube Port on Certain 3400 Engines{1304}
Specifications
Oil Pump
3406 INDUSTRIAL & MARINE ENGINES
Gauges For Engine Oil Pressure
3406 INDUSTRIAL & MARINE ENGINES
Sending Units For Oil Pressure<BR> 5L7450 Sending Unit 12V, 24V or 32V systems
3406 INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315}
Reuse and Salvage for 3044, 3046, 3064, 3066, 3400, 3500, and C175 Engine Oil Pumps {1304, 1315}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Oil Pump
3406 INDUSTRIAL & MARINE ENGINES
Service Magazine
Check For Correct Spring Retainer On Oil Pump Bypass Valve When Oil Pan Is Removed{1315,1302}
1980/11/17
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1980/12/01
Different O-Ring Seal Now Used On The Oil Pump Suction Tube{1307,1304}
1981/02/16
Remanufactured Oil Pumps Available{1304}
1984/06/04
New Oil Pump Gears Used {1304}
1986/07/07
Change Wiring To Prevent Low Oil Pressure Shutdown Immediately After Start-Up {4450}
1986/07/28
Precision Oil Pump Bearings Now Available{1304}
1977/11/07
New Oil Pressure Sender Assembly Used{7455}
1988/11/07
Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304}
Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Sump Pump
3406 INDUSTRIAL & MARINE ENGINES
Engine News
Oil Total Base Number (TBN) Test Kit Available
1986/02/01
New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01
Reuse And Salvage Guidelines
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Contamination Control Guidelines

Truck sale:

Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
32.000 
Caterpillar 3406-365, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
FINNING CHILE S.A.
 
41.565 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


 
55.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.