AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N2260 CYLINDER HEAD GROUP Part of 4N4238, 4N6191, 6N460, 6N459 and 6N458 Engine Procurement Arrangements listed on Pages 13, 16, 16A and 16B. Only separate parts serviced 3406


BASIC ENGINE
CYLINDER HEAD GP
VALVE MECHANISM GP
CYLINDER HEAD GP
MOUNTING GP-ENGINE
VALVE MECHANISM GP
LIFTING GP-ENGINE
HOUSING GP-FRONT

INDUSTRIAL ENGINE 3406 INDUSTRIAL ENGINE 90U
 3406 INDUSTRIAL ENGINE 90U00001-00439 UEG0728S 3406 90U   (1973)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
4N-2270 CYLINDER HEAD GP
CYLINDER HEAD GP
4N-2260 CYLINDER HEAD GP
CYLINDER HEAD
4N-0749 CYLINDER HEAD
7N-0628 GASKET GROUP
 

#UEG0728S0030
 

4N-2260: CYLINDER HEAD GP

4N2260 CYLINDER HEAD GROUP
Part of 4N4238, 4N6191, 6N460, 6N459 and 6N458 Engine Procurement Arrangements
listed on Pages 13, 16, 16A and 16B. Only separate parts serviced
c205466 UEG0728S
4N2260 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-7253 [6] GASKET  
2. 2S-2251 [6] SEAL  
3. 4N-3714 [6] CHAMBER ASSEM.  
4. 5F-4899 C [12] BOLT  
5. Y [1] CYLINDER HEAD  
    (Separate Illustration)
6. 6L-7442 [6] STUD  
7. 3J-5390 [4] PLUG  
8. 3J-5389 C [2] PLUG  
9. 4N-1044 [1] GASKET  
10. 7L-0520 C [12] STUD  
11. 2H-3750 [20] BOLT  
  5H-1504 [20] WASHER  
12. 4N-2269 [24] SEAL  
13. 3J-5389 C [1] PLUG  
    (Use Without Air Compressor)
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0728S0031
 

4N-0749: CYLINDER HEAD

CYLINDER HEAD (4N749 N/S)
Part of 4N2270 and 4N2260 Cylinder Head Groups shown on Pages 23 and 24
c150840 UEG0728S
4N0749 CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-5906 [24] SPRING  
2. 2N-5571 C [24] ROTOCOIL  
3. 2A-4429 [48] LOCK  
4. 4N-5079 [1] HEAD ASSEM.  
5. 2N-5775 [12] DOWEL  
6. 4N-5893 [12] INSERT  
  4S-8898 H [12] INSERT .005 in. (.13mm)oversize  
  4S-8899 H [12] INSERT .010 in. (.26mm)oversize  
7. 2M-6471 [1] PLUG  
8. 9S-9699 [12] INSERT  
  4S-8902 H [12] INSERT .005 in. (.13mm)oversize  
  4S-8903 H [12] INSERT .010 in. (.26mm)oversize  
9. 3B-0623 [10] PLUG  
10. 4N-2803 [24] GUIDE  
11. 3B-0645 [12] PLUG  
12. 4N-5654 [12] VALVE (intake)  
13. 4N-5653 [12] VALVE (exhaust)  
  C   INDICATES CHANGE
  H   NOT PART OF 4N5079 ASSEM.
 

#UEG0728S0032
 

4N-2271: VALVE MECHANISM GP

4N2271 VALVE MECHANISM GROUP
4N1045--Page 26
c302496 UEG0728S
4N2271 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1045 CY [2] ROCKER ARM GP  
2. 4N-5611 C [6] BRIDGE AS-EXHAUST  
    (EACH INCLUDES)
  4N-5607 C [1] SEAT-WEAR  
3. 2N-5842 [1] SCREW  
  9L-7712 [1] NUT  
4. 2P-9845 [6] BOLT  
  5H-1504 [6] WASHER-HARD  
5. 4N-5609 [12] ROD-VALVE PUSH  
6. 6N-6872 C [12] SPRING-GUIDE  
7. 6N-4589 CR [12] LIFTER AS-VALVE  
8. 4N-5612 C [6] BRIDGE AS-INTAKE  
    (EACH INCLUDES)
  4N-5607 C [1] SEAT-WEAR  
9. 2N-5842 [1] SCREW  
  9L-7712 [1] NUT  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#UEG0728S0033
 

4N-1045: ROCKER ARM GP

4N1045 ROCKER ARM GROUP
Part of 4N2271 Valve Mechanism
c214020 UEG0728S
4N1045 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 006-7403 [1] RETAINER  
2. 2N-7228 [4] WASHER  
3. 4N-0955 [2] PIN  
4. 2N-7229 [2] SPRING  
5. 4N-0839 [1] SHAFT ASSEM.  
6. 5B-1866 [2] PLUG  
7. 4N-0833 [3] BRACKET  
8. 4N-5614 [6] ARM ASSEM.  
9. 9L-7712 [6] NUT  
10. 1A-2935 [6] SCREW  
 

#UEG0728S0034
 

7N-0628: GASKET GROUP

7N628 GASKET GROUP--Field Installation
Eliminates Oil Transfer from Rocker Arm Oil Supply Holes to Water Jacket Areas
Note: 7N624 Block Plate is available
UEG0728S0034 UEG0728S
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7N-0623 [6] SEAL- CYLINDER LINER  
  7N-0631 [1] GASKET -CYLINDER BLOCK PLATE  
  7N-0632 [1] GASKET- CYLINDER BLOCK TO CYLINDER HEAD  
 

#UEG0728S0035
 

8N-9560: MOUNTING GP-ENGINE

8N9560 ENGINE MOUNTING GROUP--Flexible
AN ATTACHMENT
c232563 UEG0728S
8N9560 MOUNTING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-9968 [2] MOUNT AS (REAR)  
2. 5P-7197 [4] WASHER  
3. 8N-9969 [2] MOUNT AS (FRONT)  
 

#UEG0728S0036
 

4N-2272: COVER GP-VALVE MECHANISM

4N2272 VALVE MECHANISM COVER GROUP
c218393 UEG0728S
4N2272 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-8925 C [26] BOLT  
2. 4N-4536 [1] COVER-ROCKER ARM  
3. 5P-3218 BC SEAL 5.79M(228IN)  
4. 4N-4537 [1] COVER-ROCKER ARM  
5. 4N-4535 [2] BASE-ARM COVER  
6. 6N-2985 C [1] CAP AS-FILLER  
7. 4N-0851 [2] ADAPTER  
8. 2H-3755 [1] BOLT  
  9M-1974 C [1] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0728S0037
 

4N-1331: LIFTING GP

4N1331 LIFTING EYE GROUP
c149051 UEG0728S
4N1331 LIFTING GP Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4308 [1] EYE-LIFTING (FRONT)  
2. 4N-5186 [1] EYE-LIFTING (REAR)  
3. 0S-1594 C [8] BOLT  
4. 0S-1595 C [4] BOLT  
5. 2M-0849 C [4] WASHER  
6. 5M-2894 C [8] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0728S0038
 

4N-3911: HOUSING GP-FRONT

4N3911 FRONT HOUSING GROUP
Serial No. 90U1 to 90U296 inclusive. Part of 4N2238 Basic Engine Arrangement listed
on Page 14. Only separate parts serviced
c147182 UEG0728S
4N3911 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-3212 [3] BOLT  
2. 2P-3210 [3] BOLT  
3. 4N-3916 [1] GASKET  
4. 2P-3200 [7] BOLT  
5. 4N-3914 C [1] PLATE  
6. 6N-0389 C [1] STUD  
  4H-6145 [1] GASKET  
7. 2P-3202 [4] BOLT  
8. 4N-0867 [1] GASKET  
9. 2P-3261 [1] NUT  
10. 4N-3913 [1] HOUSING ASSEM.  
11. 5M-6214 [1] PLUG  
12. 6F-7012 [2] STUD  
13. 0S-0699 [8] STUD  
14. 4B-4278 C [6] WASHER  
  C   INDICATES CHANGE
 

#UEG0728S0039
 

4N-6006: FASTENER GP-FRONT HOUSING

4N6006 FRONT HOUSING FASTENER GROUP
Part of 4N2238 Basic Engine Arrangement listed on Pages 14 and 15A
Only separate parts serviced
c148695 UEG0728S
4N6006 FASTENER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-2029 C [4] BOLT  
  5M-2894 C [4] WASHER  
2. 4N-4107 [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
New Tool Makes Glow Plug Wire Removal Easier
1981/05/20
Service Manual Information About Inside Diameters Of Valve Guides
1981/10/21
New Fuel Nozzle Adapter Assembly Used
1982/02/24
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1982/04/07
Carbon Build-Up In Combustion And Inlet Areas
1982/04/07
Improved Inlet And Exhaust Valves
1982/09/22
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/19
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
New Cylinder Head Assembly Made With A Different Material
1984/02/22
New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position
1984/04/11
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/07/11
New Inlet Valves Used In Cylinder Heads
1984/09/12
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Change To Interval For Valve Lash Adjustment
1987/02/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Rubber Water Seals Available
1987/07/01
High Alloy Cylinder Head Improved
1987/07/01
Improved Valve Mechanism Cover Groups
1988/01/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Improved Head Gasket Used; Service Tips
1990/03/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1990/05/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
New Cylinder Heads Have Additional Coolant Passages
1992/06/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
New Intake And Exhaust Valves Used {1105,1100}
1994/06/01
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
Valve Lash Adjustment Intervals{1105}
1995/08/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01
Improved Exhaust Valve Now Available
1977/03/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed
1977/07/13
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Clearly Mark all of the Cracks on the Cylinder Head Including Remanufactured Engines with Serial Number Prefixes 1WW, BFF, DLA, BFD, BKY, BLR, ECP, BGE, BKS, BLJ, B1A, BNF and 2MZ {1101, 7754}
2006/04/10
Special Instruction
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Installation Of Cylinder Head Assembly{1101}
Installation Of Cylinder Head Assembly{1101}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Valves
3406 INDUSTRIAL & MARINE ENGINES
Cylinder Head
3406 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Precombustion Chambers
3406 INDUSTRIAL & MARINE ENGINES
Cylinder Head
3406 INDUSTRIAL & MARINE ENGINES
Valves
3406 INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3406 INDUSTRIAL & MARINE ENGINES
Bridge Dowels, Valve Guides
3406 INDUSTRIAL & MARINE ENGINES
Valve Guides
3406 INDUSTRIAL & MARINE ENGINES
Service Magazine
Use The Correct Water Temperature Contactor{1350,1100}
1980/02/11
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
Service Manual Information About Inside Diameters Of Valve Guides{1104,0374}
1981/10/05
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Improved Inlet And Exhaust Valves{1105}
1982/09/06
New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/06
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Cylinder Head Assembly Made With A Different Material {1101}
1984/02/06
New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position{1106,1252}
1984/04/09
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02
New Inlet Valve Used{1105}
1984/09/03
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
New Water Temperature Regulator Has A Closer Fit At The Valve Seat To Keep Leakage At A Minimum{1355}
1977/01/17
Same Valve Camshaft Assembly Used On Direct Injection Engines Now Used On Engines That Have Precombustion Chambers{1210}
1977/01/24
Improved Exhaust Valve Now Available{1105}
1977/02/28
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads{0663,1101}
1977/06/20
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed{1101,1201}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Change To Interval For Valve Lash Adjustment{1103,1105,1123}
1987/02/16
Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/16
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Silicone Rubber Water Seals Available{1100}
1987/07/06
High Alloy Cylinder Head Improved{1101}
1987/07/06
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Cylinder Heads Have Additional Coolant Passages{1101,1100}
1992/06/29
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13

Caterpillar Parts SIS Catalog 3406 :

CYLINDER HEAD GP
4N-2270 CYLINDER HEAD GP
CAMSHAFT ASSEMBLY
6N-1405 CAMSHAFT ASSEMBLY
CAMSHAFT
6N-1406 CAMSHAFT
PISTON & ROD GP
4N-0758 PISTON & ROD GP
CONNECTING ROD AND PISTON GROUP
4N-0764 CONNECTING ROD AND PISTON GROUP
CONNECTING ROD ASSEMBLY
8N-2486 CONNECTING ROD ASSEMBLY
CONNECTING ROD AND PISTON GROUP
4N-0764 CONNECTING ROD AND PISTON GROUP
GASKET KITS
GASKET KITS
CYLINDER HEAD
4N-0749 CYLINDER HEAD
VALVE MECHANISM GP
4N-2271 VALVE MECHANISM GP
ROCKER ARM GP
4N-1045 ROCKER ARM GP
7N-0628 GASKET GROUP
MOUNTING GP-ENGINE
8N-9560 MOUNTING GP-ENGINE
COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
LIFTING GP
4N-1331 LIFTING GP
HOUSING GP-FRONT
4N-3911 HOUSING GP-FRONT

Truck sale:

Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
32.000 
Caterpillar 3406-365, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
FINNING CHILE S.A.
 
41.565 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


 
55.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.