AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N3224 WOODWARD GOVERNOR ARRANGEMENT--Without Motor Provides Isochronous Control for Electric Set Applications Only separate parts serviced. AN ATTACHMENT 3406


FUEL SYSTEM
GOVERNOR GP
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
FUEL SYSTEM
GOVERNOR GP

INDUSTRIAL ENGINE 3406 INDUSTRIAL ENGINE 90U
 3406 INDUSTRIAL ENGINE 90U00001-00439 UEG0728S 3406 90U   (1973)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GROUP
4N-8144 GOVERNOR GROUP
GOVERNOR GROUP
4N-8144 GOVERNOR GROUP
4N-3224 WOODWARD GOVERNOR ARRANGEMENT
4N-4829 WOODWARD GOVERNOR ARRANGEMENT
WOODWARD GOVERNOR GROUP
4N-3697 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
4N-1416 WOODWARD GOVERNOR GROUP
 

#UEG0728S0360
 

4N-3224: WOODWARD GOVERNOR ARRANGEMENT

4N3224 WOODWARD GOVERNOR ARRANGEMENT--Without Motor
Provides Isochronous Control for Electric Set Applications
Only separate parts serviced. AN ATTACHMENT
UEG0728S0360 UEG0728S
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4N-0852 Y [1] WOODWARD GOVERNOR DRIVE GROUP  
  Y [1] WOODWARD GOVERNOR GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEG0728S0361
 

4N-4829: WOODWARD GOVERNOR ARRANGEMENT

4N4829 WOODWARD GOVERNOR ARRANGEMENT--With Motor
Provides Isochronous Control for Electric Set Applications
Only separate parts serviced. AN ATTACHMENT
UEG0728S0361 UEG0728S
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4N-0852 Y [1] WOODWARD GOVERNOR DRIVE GROUP  
  4N-1416 Y [1] WOODWARD GOVERNOR GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEG0728S0362
 

4N-3697: WOODWARD GOVERNOR GROUP

4N3697 WOODWARD GOVERNOR GROUP
Also part of 4N3224 Woodward Governor Arrangement listed on Page 129
AN ATTACHMENT
c148284 UEG0728S
4N3697 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-3222 Y [1] GOVERNOR GROUP  
    (Separate Illustration)
2. 6L-2081 [1] LEVER  
3. 3L-1474 [1] PIN  
  Y   SEPARATE ILLUSTRATION
 

#UEG0728S0363
 

4N-1416: WOODWARD GOVERNOR GROUP

4N1416 WOODWARD GOVERNOR GROUP
Also part of 4N4829 Woodward Governor Arrangement listed on Page 129
4N6337 Governor parts are shown on Page 131. AN ATTACHMENT
c148282 UEG0728S
4N1416 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-2081 [1] LEVER  
2. 3L-1474 [1] PIN  
3. 4N-6337 Y [1] GOVERNOR ASSEM.  
    (Separate Illustration)
4. 3L-3911 [1] SWITCH  
5. 3L-4576 [1] PLATE (name)  
6. 2L-8919 [6] DISCONNECT  
7. 8F-1559 [3] INSULATOR  
  H [1] WIRING DIAGRAM  
  H   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#UEG0728S0364
 

4N-3222: GOVERNOR GP

4N3222 WOODWARD GOVERNOR GROUP--Type 1
Part of 4N3697 Woodward Governor Group
c204497 UEG0728S
4N3222 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-7674 [1] NUT  
2. 3N-5761 [1] SCREW  
3. 3N-4219 [1] BRACKET ASSEM.  
4. 3N-5724 [1] COVER  
5. 3N-5723 [1] SPRING  
6. 2F-2293 C [2] GASKET  
7. 3N-5722 [1] CAP  
8. 3N-5729 [1] SEAT  
9. 6L-3987 [1] SHAFT  
10. 3N-5720 [1] LINK ASSEM.  
11. 6L-3991 [1] SPRING  
12. 6L-4005 [2] SPACER  
13. 2N-1894 [1] PIN  
14. 6L-9838 [2] SHAFT  
15. 3N-5726 [1] PIN  
16. 3N-5730 [1] LEVER  
17. 6L-4007 [1] VALVE ASSEM.  
18. 6L-4004 [1] SCREW  
19. 3N-5728 [1] STRUT  
20. 3N-5727 [1] PISTON  
21. 3N-5721 [1] CASE ASSEM.  
22. 6L-3990 [2] SPRING  
23. 6L-3997 [1] PISTON  
24. 7L-3107 [1] BASE ASSEM.  
25. 6L-3995 [1] SEAT  
26. 6L-3983 [1] GEAR (10 teeth)  
27. 6L-4003 [1] BUSHING  
28. 6L-3994 [1] PLUNGER  
29. 2N-6223 [1] BALLHEAD ASSEM.  
30. 6L-3989 [1] BEARING  
31. 6L-3996 [1] SEAT  
32. 2N-1021 [1] SPRING AND FORK ASSEM.  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  3N-5859 [1] KIT (hardware)  
    (Consists of Bearings, Shims, Pins, Seals, Packing, Washers, Lockwashers, Screws, Nuts, Rings, Ballarms, Gaskets, Valve, Plunger and Bushing)
  C   INDICATES CHANGE
 

#UEG0728S0365
 

4N-3222: GOVERNOR GP

4N3222 WOODWARD GOVERNOR GROUP--Type 2
Part of 4N3697 Woodward Governor Group
c301555 UEG0728S
4N3222 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3F-7674 [1] NUT  
2. 3N-3935 C [1] BOLT  
3. 3N-4219 [1] BRACKET ASSEM.  
4. 3N-5724 [1] COVER  
5. 3N-5723 [1] SPRING  
6. 2F-2293 [2] GASKET  
7. 7N-4689 C [1] CAP ASSEM.  
8. 3N-5729 [1] SEAT  
9. 6L-3987 [1] SHAFT  
10. 3N-5720 [1] LINK ASSEM.  
11. 6L-3991 [1] SPRING  
12. 6L-4005 [2] SPACER  
13. 2N-1894 [1] PIN  
14. 6L-9838 [2] SHAFT  
15. 6N-7530 C [1] PIN  
16. 1W-4891 C [1] LEVER ASSEM.  
17. 6L-4007 [1] VALVE ASSEM.  
18. 8N-2276 C [1] STOP ASSEM.  
19. 3N-5728 [1] STRUT  
20. 3N-5727 [1] PISTON  
21. 3N-5721 [1] CASE ASSEM.  
22. 6L-3990 [2] SPRING  
23. 6L-3997 [1] PISTON  
24. 7L-3107 [1] BASE ASSEM.  
25. 6L-3995 [1] SEAT  
26. 6L-3983 [1] GEAR (10 teeth)  
27. 6L-4003 [1] BUSHING  
28. 6L-3994 [1] PLUNGER  
29. 7N-0001 C [1] BALLHEAD ASSEM.  
30. 7N-4533 C [1] BEARING  
31. 6L-3996 [1] SEAT  
32. 2N-1021 [1] SPRING AND FORK ASSEM.  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  7N-7390 C [1] KIT (hardware)  
    (Consists of Bearings, Shims, Pins, Seals, Packing, Washers, Lockwashers, Screws, Nuts, Rings, Ballarms, Gaskets, Valve, Plunger and Bushing)
  C   INDICATES CHANGE
 

#UEG0728S0366
 

6N-3227: WOODWARD GOVERNOR GROUP

6N3227 WOODWARD GOVERNOR GROUP
Replaced by 6N9734 shown on Page 130B
6N1460 Governor Parts are shown on Page 130C
c205288 UEG0728S
6N3227 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-2081 [1] LEVER  
2. 3L-1474 [1] PIN  
3. 6N-1460 Y [1] GOVERNOR GROUP  
    (Separate Illustration)
4. 3L-3911 [1] SWITCH  
5. 3L-4576 [1] PLATE (name)  
6. 2L-8919 [6] DISCONNECT  
7. 8F-1559 [1] INSULATOR  
  H [1] WIRING DIAGRAM  
  H   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#UEG0728S0367
 

6N-9734: GOVERNOR GP-WOODWARD

6N9734 WOODWARD GOVERNOR GROUP
6N9731 Governor parts are shown on Page 130D
AN ATTACHMENT
c163053 UEG0728S
6N9734 GOVERNOR GP-WOODWARD Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-2081 [1] LEVER  
2. 3L-1474 [1] PIN  
3. 6N-9731 Y [1] GOVERNOR GROUP  
    (Separate Illustration)
4. 3L-3911 [1] SWITCH (toggle)  
5. 3L-4576 [1] PLATE (name)  
6. 2L-8919 [6] DISCONNECT  
7. 8F-1559 [1] INSULATOR  
  H [1] WIRING DIAGRAM  
  H   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#UEG0728S0368
 

8N-1635: SWITCH GP

8N1635 WOODWARD GOVERNOR SWITCH GROUP
FOR USE WITH WOODWARD PSG GOVERNOR & WOODWARD EG3P
WOODWARD ELECTRIC GOVERNOR. AN ATTACHMENT
c222478 UEG0728S
8N1635 SWITCH GP Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-4576 [1] PLATE  
2. 3L-3911 [1] SWITCH (governor)  
  [1] WIRING DIAGRAM  
 

#UEG0728S0369
 

6N-1460: WOODWARD GOVERNOR GROUP

6N1460 WOODWARD GOVERNOR GROUP
Replaced by 6N9731 shown on Page 130D
Part of 6N3227 Woodward Governor Group shown on Page 130B
c162805 UEG0728S
6N1460 WOODWARD GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3406 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-1539 [1] COVER ASSEM.  
2. 2N-1021 [1] SPRING AND FORK ASSEM.  
3. 3N-4219 [1] BRACKET ASSEM.  
4. 6L-3996 [1] SEAT  
5. 3N-5723 [1] SPRING  
6. 2F-2293 [1] GASKET  
7. 6L-3989 [1] BEARING  
8. 3N-5729 [1] SEAT  
9. 6L-3987 [1] SHAFT  
10. 3N-5720 [1] LINK ASSEM.  
11. 6L-3991 [1] SPRING  
12. 6L-4005 [2] SPACER  
13. 2N-1894 [1] PIN  
14. 6L-9838 [2] SHAFT  
15. C [1] PIN  
16. 3N-5730 [1] LEVER  
17. 6L-4007 [1] VALVE ASSEM.  
18. 6L-4004 [1] SCREW  
19. 3N-5728 [1] STRUT  
20. 3N-5727 [1] PISTON  
21. 3N-5721 [1] CASE ASSEM.  
22. 6L-3990 [2] SPRING  
23. 6L-3997 [1] PISTON  
24. 7L-3107 [1] BASE ASSEM.  
25. 6L-3995 [1] SEAT  
26. 6L-3983 [1] GEAR (10 teeth)  
27. 6L-4003 [1] BUSHING  
28. 6L-3994 [1] PLUNGER  
29. 2N-6223 [1] BALLHEAD ASSEM.  
30. 6N-7531 C [1] VALVE (needle)  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  3N-5860 [1] KIT (hardware)  
    (Includes Bearings, Shims, Pins, Seals, Packing, Washers, Lockwashers, Screws, Nuts, Rings, Ballarms, Gaskets, Valves, Plunger and Bushing)
  C   INDICATES CHANGE
 

Information:

Engine News
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only
1979/04/04
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar
1979/08/08
New Timing Advance Weight Used
1980/10/01
Explanation Of Differences In Timing Advance Information
1981/08/26
Part Number For Fuel Injection Pump Group In New Location
1981/11/25
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1981/12/16
New Idler Shaft Used In Fuel Transfer Pumps
1982/02/24
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New EG3P Actuator Assemblies Available
1984/03/07
Overvoltage Protection For Woodward 2301 Governor
1984/04/11
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators
1984/05/16
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
New Fuel Shutoff Solenoid Assembly Used
1988/11/01
Governor Control Motor Polarity May Require A Change
1990/11/01
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups
1991/05/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
Pressure Compensated Simple Governor (PSG Governor) Changes From Aluminum To Cast Iron Housing {1264}
1995/04/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/12
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
Improved EG-3P Actuator Assembly For 3406 Engines{1903}
1997/04/01
New Spring Used In Fuel Ratio Control
1977/03/15
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Fuel Transfer Pump Shaft With Chromium Plate
1977/10/12
A One-Piece Spring Seat Is Now Used In The Governor
1978/07/05
New Design Seals Decrease Shaft Wear In Fuel Transfer Pump
1978/08/30
Different O-Ring Seals Now Used In Fuel Injection Pump Group
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 6N8859 And 6N8860 Governor Spring Service Groups{1286}
Installation Of 6N8859 And 6N8860 Governor Spring Service Groups{1286}
Governor Linkage Adjustments{1264, 1289}
Governor Linkage Adjustments{1264, 1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Installation Of 4W5391 Preregulator Box Assembly{1289}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel System Identification
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection
3406 INDUSTRIAL & MARINE ENGINES
Governor
3406 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance Unit<BR> [4N8008 (PC); [6N5202 (DI)]
3406 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3406 INDUSTRIAL & MARINE ENGINES
Drive For Fuel Transfer Pump And Tachometer
3406 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3406 INDUSTRIAL & MARINE ENGINES
Governor Linkage
3406 INDUSTRIAL & MARINE ENGINES
Governor Air Actuator
3406 INDUSTRIAL & MARINE ENGINES
Governor Controls
3406 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Transfer Pump
3406 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump (Earlier)
3406 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump (Later)
3406 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance (Earlier)
3406 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance (Later)
3406 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor (Earlier)
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor (Later)
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor (Earlier And Later)
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3406 INDUSTRIAL & MARINE ENGINES
Governor
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Timing Advance Weight Used{1272,1288,1286,1264}
1980/10/06
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group{1272,1288}
1981/12/14
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
New Rack Shutoff Solenoid Available{1257,1259}
1983/02/28
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New EG3P Actuator Assemblies Available{1289}
1984/02/27
Overvoltage Protection For Woodward 2301 Governor{1289}
1984/04/09
Only The External Needle Valve Can Be Adjusted On Woodward EG3P or EG10P Actuators{1265,1289}
1984/04/23
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
More Precise Governor Speed Adjustment Possible With Attachment Governor Control Groups{1265,1264,1250}
1986/06/02
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
A One-Piece Spring Seat Is Now Used In The Governor{1264}
1978/06/26
New Design Seals Decrease Shaft Wear In Fuel Transfer Pump{1256}
1978/08/28
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only{1265}
1979/03/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar{1259,1257,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Control Motor Polarity May Require A Change{1265,1408,7556}
1990/10/29
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Major Engine Component Changes{1201,1202,1205,1218,1219,1230,1253,1288,1331}
1992/09/07
Fuel Injection Pump Improvements{1251}
1994/02/07
Improved Governor Servo Components Available For Use With Energize To Run Solenoids; Energize To Run Solenoid Stop Bolt Adjustment Procedure{1264,1259}
1996/06/03

Caterpillar Parts SIS Catalog 3406 :

CONTROL GP-GOVERNOR
8N-1730 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8N-1731 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7N-0241 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7N-0240 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-5326 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-5325 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8N-2177 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
4N-5358 CONTROL GP-GOVERNOR
4N-4829 WOODWARD GOVERNOR ARRANGEMENT
WOODWARD GOVERNOR GROUP
4N-3697 WOODWARD GOVERNOR GROUP
WOODWARD GOVERNOR GROUP
4N-1416 WOODWARD GOVERNOR GROUP
GOVERNOR GP
4N-3222 GOVERNOR GP
GOVERNOR GP
4N-3222 GOVERNOR GP
WOODWARD GOVERNOR GROUP
6N-3227 WOODWARD GOVERNOR GROUP
GOVERNOR GP-WOODWARD
6N-9734 GOVERNOR GP-WOODWARD
SWITCH GP
8N-1635 SWITCH GP

Truck sale:

Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
32.000 
Caterpillar 3406-365, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
FINNING CHILE S.A.
 
41.565 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


 
55.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.