AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3P4646 LIGHTING SYSTEM--4 Lamp--24 Volt Serial No. 10K8167-Up FOR USE WITH BRAID PROTECTED WIRING HARNESS 1M1882 Lamp parts are shown on Page 53. AN ATTACHMENT D6C


ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
POWER TRAIN
TORQUE CONVERTER GP
TORQUE DIVIDER GP

TRACK-TYPE TRACTOR D6C TRACK-TYPE TRACTOR 10K
 D6C TRACTOR 10K07953-11939 (MACHINE) UEG0729S D6C 10K   (1967)

ELECTRICAL AND STARTING SYSTEM

LIGHTING GP
8S-1076 LIGHTING SYSTEM
LIGHTING SYSTEM
2P-4029 LIGHTING SYSTEM
LIGHTING SYSTEM
3P-4646 LIGHTING SYSTEM
LIGHTING SYSTEM
3P-4209 LIGHTING SYSTEM
LIGHTING SYSTEM
3P-4645 LIGHTING SYSTEM
LAMP GP
1M-1882 LAMP GP
 

#UEG0729S0070
 

3P-4646: LIGHTING SYSTEM

3P4646 LIGHTING SYSTEM--4 Lamp--24 Volt
Serial No. 10K8167-Up
FOR USE WITH BRAID PROTECTED WIRING HARNESS
1M1882 Lamp parts are shown on Page 53. AN ATTACHMENT
c118612 UEG0729S
3P4646 LIGHTING SYSTEM Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-1915 [8] BOLT  
  1D-4717 [8] NUT  
  4B-5271 [8] WASHER  
2. 3B-4506 [11] LOCKWASHER  
3. 1B-4206 [4] NUT  
  3B-4510 [4] LOCKWASHER  
4. 2B-8352 [8] WASHER  
5. 1M-1882 Y [4] LAMP ASSEM.  
    (Separate Illustration)
6. 9H-5156 [2] GROMMET  
7. 1S-1888 [2] BRACKET  
8. 2S-9726 [1] BRACKET  
9. 4K-5122 [2] FUSE HOLDER  
  3K-8781 [2] FUSE  
10. 2S-9727 [2] GROMMET  
11. 2S-9728 [1] WIRE ASSEM.  
  4S-8787 H WIRE 10 in.  
  4L-3916 [2] TERMINAL  
12. 2L-8057 [1] TERMINAL  
13. 4M-7470 [2] GROMMET  
14. 7M-3004 [1] GUARD ASSEM.  
15. 0L-1351 [2] BOLT  
16. 1H-5166 [10] CLIP  
17. 7M-3003 [1] GUARD ASSEM.  
18. 3P-4207 [1] WIRE ASSEM.  
  4S-8787 H WIRE 139 in.  
  [2] TERMINAL  
19. 4S-8760 H TUBE 101 in.  
20. 2S-1043 [1] BUTT  
21. 3S-2093 [5] TIE  
22. 1S-7837 [1] TERMINAL  
23. 0T-0102 [1] BOLT  
24. 1H-5165 [1] CLIP  
  0S-1595 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
25. 3P-4644 [1] WIRE ASSEM.  
  4S-8787 H WIRE 191 in.  
  3S-2093 [6] TIE  
26. 4S-8760 H TUBE 174 in.  
27. 2S-1043 [1] BUTT  
28. 1S-7837 [1] TERMINAL  
29. 2L-8075 [2] TERMINAL  
30. 2P-0772 [2] PLATE  
  H   ORDER BY THE FOOT
  Y   SEPARATE ILLUSTRATION
 

#UEG0729S0071
 

3P-4209: LIGHTING SYSTEM

3P4209 LIGHTING SYSTEM--2 Lamp--24 Volt
Serial No. 10K8167-Up
FOR USE WITH BRAID PROTECTED WIRING HARNESS
1M1882 Lamp parts are shown on Page 53. AN ATTACHMENT
c149204 UEG0729S
3P4209 LIGHTING SYSTEM Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-1882 Y [2] LAMP ASSEM.  
    (Separate Illustration)
2. 1S-1888 [1] BRACKET  
  9H-5156 [1] GROMMET  
4. 3B-1915 [4] BOLT  
  1D-4717 [4] NUT  
  4B-5271 [4] WASHER  
5. 3B-4506 [6] LOCKWASHER  
6. 1H-5166 [6] CLIP  
7. 3P-4205 [1] WIRE ASSEM.  
  4S-8760 H TUBE 68 in.  
  4S-8787 H WIRE 97 in.  
8. 2L-8075 [1] TERMINAL  
9. 3S-2093 [2] TIE  
10. 1S-7837 [1] TERMINAL  
11. 1H-5165 [1] CLIP  
12. 0S-1595 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
13. 0T-0102 [1] BOLT  
14. 2S-9726 [1] BRACKET  
15. 4K-5122 [2] FUSE HOLDER  
  3K-8781 [2] FUSE  
16. 2S-9727 [2] GROMMET  
17. 2S-9728 [1] WIRE ASSEM.  
  4S-8787 H WIRE (Use as required) 8.50 in.  
  4L-3916 [2] TERMINAL  
18. 2L-8057 [1] TERMINAL  
19. 3P-4206 [1] WIRE ASSEM.  
  4S-8760 H TUBE 51 in.  
  1S-7837 [1] TERMINAL  
20. 3S-2093 [2] TIE  
21. 4S-8787 H WIRE 73 in.  
22. 2L-8075 [1] TERMINAL  
23. 1B-4206 [2] NUT  
  3B-4510 [2] LOCKWASHER  
  2B-8352 [4] WASHER  
24. 0L-1351 [1] BOLT  
25. 4M-7470 [1] GROMMET  
26. 7M-3003 [1] GUARD ASSEM.  
27. 9S-9604 [1] CONDUIT ASSEM.  
  4S-8751 H CONDUIT 22 in.  
28. 1S-2294 [2] BOOT  
  1S-6870 [2] LINER  
  H   ORDER BY THE FOOT
  Y   SEPARATE ILLUSTRATION
 

#UEG0729S0072
 

3P-4645: LIGHTING SYSTEM

3P4645 LIGHTING SYSTEM--2 Lamp--24 Volt
Serial No. 10K8167-Up
FOR USE WITH BRAID PROTECTED WIRING HARNESS
AN ATTACHMENT
c118610 UEG0729S
3P4645 LIGHTING SYSTEM Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. J [2] LAMP ASSEM.  
2. [1] BRACKET  
  [1] GROMMET  
3. [1] PLATE  
4. [4] BOLT  
  [4] NUT  
  [4] WASHER  
5. [6] LOCKWASHER  
6. [6] CLIP  
7. [1] WIRE ASSEM.  
  H TUBE 101 in.  
  H WIRE 109 in.  
8. [1] TERMINAL  
9. [2] TIE  
10. [1] TERMINAL  
11. [1] CLIP  
12. [1] BOLT  
  [1] NUT  
  [1] LOCKWASHER  
13. [1] BOLT  
14. [1] BRACKET  
15. [2] FUSE HOLDER  
  [2] FUSE  
16. [2] GROMMET  
17. [1] WIRE ASSEM.  
  H WIRE (Use as required) 8.50 in.  
  [2] TERMINAL  
18. [1] TERMINAL  
19. [1] WIRE ASSEM.  
  H TUBE 51 in.  
  [1] TERMINAL  
20. [2] TIE  
21. H WIRE 73 in.  
22. [1] TERMINAL  
23. [2] NUT  
  [2] LOCKWASHER  
  [4] WASHER  
24. [1] BOLT  
25. [1] GROMMET  
26. [1] GUARD ASSEM.  
  H   ORDER BY THE FOOT
  J   SEPARATE ILLUSTRATION
 

#UEG0729S0073
 

1M-1882: LAMP GP

1M1882 FLOOD LAMP ASSEMBLY
Part of 7S7955, 2P4030, 8S1076, 2P4029, 3P4646, 3P4209, 3P4645 and
3P4210 Lighting Systems shown on Pages 42 through 52, 54 & 55
c119409 UEG0729S
1M1882 LAMP GP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-5898 [1] LAMP-SEALED UNIT  
2. 2P-2541 [1] BODY AS  
3. 2M-5282 [1] RING-MOUNTING  
4. 2M-5284 [2] MOLDING AS  
  5M-6668 [2] SCREW-MACHINE  
 

#UEG0729S0074
 

3P-4210: LIGHTING SYSTEM

3P4210 LIGHTING SYSTEM--4 Lamp--24 Volt--Type 1
Serial No. 10K8167-Up
FOR USE WITH BRAID PROTECTED WIRING HARNESS
1M1882 Lamp parts are shown on Page 53. AN ATTACHMENT
c118620 UEG0729S
3P4210 LIGHTING SYSTEM Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-9604 [2] CONDUIT ASSEM.  
  4S-8751 H CONDUIT 22 in.  
2. 1S-2294 [2] BOOT  
  1S-6870 [2] LINER  
3. 1S-6420 [2] CLIP  
4. 0S-1595 [3] BOLT  
  1D-4719 [3] NUT  
  3B-4508 [3] LOCKWASHER  
5. 3P-4208 [1] WIRE ASSEM.  
  4S-8760 H TUBE 110 in.  
  3S-2093 [4] TIE  
6. 2L-8075 [2] TERMINAL  
7. 2S-1043 [1] BUTT  
8. 4S-8787 H WIRE 170 in.  
9. 1S-7837 [1] TERMINAL  
10. 3B-1915 [8] BOLT  
  1D-4717 [8] NUT  
  4B-5271 [8] WASHER  
11. 3B-4506 [11] LOCKWASHER  
12. 1S-1888 [2] BRACKET  
13. 1B-4206 [4] NUT  
  3B-4510 [4] LOCKWASHER  
  2B-8352 [8] WASHER  
14. 1M-1882 Y [4] LAMP ASSEM.  
    (Separate Illustration)
15. 9H-5156 [2] GROMMET  
16. 1H-5166 [10] CLIP  
17. 1H-5165 [1] CLIP  
18. 0T-0102 [1] BOLT  
19. 2S-9726 [1] BRACKET  
20. 4K-5122 [2] FUSE HOLDER  
  3K-8781 [2] FUSE  
21. 2S-9727 [2] GROMMET  
22. 2S-9728 [1] WIRE ASSEM.  
  4S-8787 H WIRE (use as required)8.50 in  
  4L-3916 [2] TERMINAL  
23. 2L-8057 [1] TERMINAL  
24. 7M-3004 [1] GUARD ASSEM. (L.H.)  
25. 3P-4207 [1] WIRE ASSEM.  
  4S-8787 H WIRE 139 in.  
  1S-7837 [1] TERMINAL  
26. 4S-8760 TUBE 101 in.  
27. 3S-2093 [5] TIE  
28. 2L-8075 [2] TERMINAL  
29. 2S-1043 [1] BUTT  
30. 0L-1351 [2] BOLT  
31. 4M-7470 [2] GROMMET  
32. 7M-3003 [1] GUARD ASSEM. (R.H.)  
  H   ORDER BY THE FOOT
  Y   SEPARATE ILLUSTRATION
 

#UEG0729S0075
 

3P-4210: LIGHTING SYSTEM

3P4210 LIGHTING SYSTEM--4 Lamp--24 Volt--Type 2
Serial No. 10K8167-Up
FOR USE WITH BRAID PROTECTED WIRING HARNESS
1M1882 Lamp parts are shown on Page 53. AN ATTACHMENT
c149028 UEG0729S
3P4210 LIGHTING SYSTEM Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-9604 [2] CONDUIT ASSEM.  
  4S-8751 H CONDUIT 22 in.  
2. 1S-2294 [2] BOOT  
  1S-6870 [2] LINER  
4. 0S-1595 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
5. 3P-4208 [1] WIRE ASSEM.  
  4S-8760 H TUBE 110 in.  
  3S-2093 [4] TIE  
6. 2L-8075 [2] TERMINAL  
7. 2S-1043 [1] BUTT  
8. 4S-8787 H WIRE 170 in.  
9. 1S-7837 [1] TERMINAL  
10. 3B-1915 [8] BOLT  
  1D-4717 [8] NUT  
  4B-5271 [8] WASHER  
11. 3B-4506 [11] LOCKWASHER  
12. 1S-1888 [2] BRACKET  
13. 1B-4206 [4] NUT  
  3B-4510 [4] LOCKWASHER  
  2B-8352 [8] WASHER  
14. 1M-1882 Y [4] LAMP ASSEM.  
    (Separate Illustration)
15. 9H-5156 [2] GROMMET  
16. 1H-5166 [10] CLIP  
17. 1H-5165 [1] CLIP  
18. 0T-0102 [1] BOLT  
19. 2S-9726 [1] BRACKET  
20. 4K-5122 [2] FUSE HOLDER  
  3K-8781 [2] FUSE  
21. 2S-9727 [2] GROMMET  
22. 2S-9728 [1] WIRE ASSEM.  
  4S-8787 H WIRE (use as required)8.50 in.  
  4L-3916 [2] TERMINAL  
23. 2L-8057 [1] TERMINAL  
24. 7M-3004 [1] GUARD ASSEM. (L.H.)  
25. 3P-4207 [1] WIRE ASSEM.  
  4S-8787 H WIRE 139 in.  
  1S-7837 [1] TERMINAL  
26. 4S-8760 TUBE 101 in.  
27. 3S-2093 [5] TIE  
28. 2L-8075 [2] TERMINAL  
29. 2S-1043 [1] BUTT  
30. 0L-1351 [2] BOLT  
31. 4M-7470 [2] GROMMET  
32. 7M-3003 [1] GUARD ASSEM. (R.H.)  
  H   ORDER BY THE FOOT
  Y   SEPARATE ILLUSTRATION
 

#UEG0729S0076
 

1T-0930: TORQUE CONVERTER GP

1T930 TORQUE CONVERTER GROUP
Part of Torque Divider shown on Page 58
c112440 UEG0729S
1T0930 TORQUE CONVERTER GP Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-6986 [1] RING-RETAINING  
2. 5H-1901 [1] BEARING-OUTER  
3. 1T-0443 [1] CARRIER AS-GUIDE  
4. 1T-0069 [2] RING-METAL SEAL  
5. 1T-0436 [1] GEAR-PUMP DRIVE (64 TEETH)  
6. 1T-0448 [8] BOLT-12 POINT HEAD  
7. 1T-0425 [1] BALL BEARING-SPL  
8. 1T-0051 [1] WHEEL-IMPELLER  
9. 4B-3388 [36] BOLT  
10. 1T-0738 [36] WASHER  
11. 1T-0064 [1] CARRIER-BEARING  
12. 1T-0937 [1] STATOR AS  
13. 4H-1440 [6] PIN-SPRING  
14. 1T-0414 [8] BOLT-12 POINT HEAD  
15. 3F-3727 [1] RING-SNAP  
16. 1T-0052 [1] WHEEL-TURBINE  
17. 1T-0599 [1] SPACER  
18. 1T-0421 [1] FLANGE AS-OUTPUT  
19. 1T-0902 [2] BEARING-SLEEVE  
20. 1T-0097 [1] RING-METAL SEAL  
21. 1T-0447 [1] CARRIER-RING  
22. 1T-0446 [6] BOLT-SPECIAL HEAD  
23. 1T-0438 [1] RETAINER-BEARING  
24. 1T-0441 [1] BALL BEARING  
25. 4B-4158 [2] SCREW  
26. 1T-0675 [1] NAMEPLATE  
27. 1T-0437 [1] HOUSING-ROTATING (66 TEETH)  
 

#UEG0729S0077
 

5M-5800: TORQUE DIVIDER

TORQUE DIVIDER (5M5800 N/S)--Side View--Part 1 of 2
Serial No. 10K7953 to 10K8700 inclusive
1T930 Converter, 5M7864 Pump and 5M7882 Joint parts are shown on Pages 57 and 61
c129973 UEG0729S
5M5800 TORQUE DIVIDER Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5M-7874 [1] COVER ASSEM.  
  1A-4672 [1] PLUG  
  5B-5812 [2] DOWEL  
    (PARTS OF COVER ASSEM. 5M7874)
  9M-2008 [1] RING  
  1S-6543 [1] SEAL  
  8B-5964 [1] RACE  
  3S-4388 [1] WASHER  
  5M-7882 Y [1] JOINT ASSEM.  
    (SEE SEPARATE ILLUSTRATION)
  0T-0627 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  8M-8628 [1] FLANGE  
  6F-4718 [1] SEAL  
  5M-5822 [1] GEAR (43 TEETH)  
  1B-8705 [1] KEY  
  5M-7864 Y [1] PUMP GROUP  
    (SEE SEPARATE ILLUSTRATION)
  1B-4430 [1] NUT  
  3H-0449 [1] LOCK  
  4M-5876 [1] GASKET  
  5M-6604 [1] GASKET  
  1T-0930 CY [1] CONVERTER ASSEM.  
    (SEE SEPARATE ILLUSTRATION)
  9M-1976 [1] RING  
  5M-6208 [1] GEAR (82 TEETH)  
  9M-2028 [1] GEAR (66 TEETH)  
  5H-6480 [1] RING  
  9H-8712 [1] BEARING ASSEM.  
  9M-2014 [1] RACE  
  1M-4102 [1] PLUG  
    (PART OF SHAFT ASSEM. 9S5265)
  9S-5265 [1] SHAFT ASSEM.  
  2D-1523 [1] RING  
  5M-6181 [3] GEAR (23 TEETH)  
  1K-7041 [3] SPRING  
  7M-5734 [6] WASHER  
  2A-3746 [3] PLUG  
  5M-6198 [3] SHAFT  
  1K-6978 [3] SCREW  
  5M-7877 [3] LOCK  
  9S-5267 [1] CARRIER ASSEM.  
  7M-8594 [5] RIVET  
  5M-6178 [2] WASHER  
    (PARTS OF 9S5267 ASSEM.)
  2S-0669 [3] BEARING ASSEM.  
  5M-7878 [1] RING  
  [2] PIN  
  C   INDICATES CHANGE FROM PREVIOUS
  Y   SEPARATE ILLUSTRATION
 

#UEG0729S0078
 

5M-5800: TORQUE DIVIDER

TORQUE DIVIDER (5M5800 N/S)--End View--Part 2 of 2
Serial No. 10K7953 to 10K8700 inclusive
2S1390 and 2P3675 Valve parts are shown on Page 60
c116071 UEG0729S
5M5800 TORQUE DIVIDER Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1619 [ 3] BOLT  
  3B-4506 [ 3] LOCKWASHER  
  2P-3675 Y [ 1] VALVE GROUP  
  0L-0139 [ 2] BOLT  
  1A-2029 [ 8] BOLT  
  3B-4506 [ 8] LOCKWASHER  
  1A-2029 [ 6] BOLT  
  3B-4506 [ 6] LOCKWASHER  
  5M-5064 [ 1] GASKET  
  5M-5067 [ 1] COVER ASSEM  
  7B-0533 [ 1] STUD  
    (PART OF COVER ASSEM 5M5067)
  8B-6599 [ 1] PLUG  
  0L-1124 [ 1] GASKET  
  2S-1390 Y [ 1] VALVE GROUP  
  0T-0573 [ 3] BOLT  
  3B-4506 [ 3] LOCKWASHER  
  1D-4719 [ 12] NUT  
  3B-4508 [ 12] LOCKWASHER  
  4H-2978 [ 1] SCREEN ASSEM.  
  3H-1846 [ 1] SPACER  
  2F-8616 [ 1] NUT  
  1A-2029 [ 5] BOLT  
  3B-4506 [ 5] LOCKWASHER  
    SEPARATE ILLUSTRATION
 

#UEG0729S0079
 

5M-5800: TORQUE DIVIDER

TORQUE DIVIDER (5M5800 N/S)--Side View--Part 1 of 2
Serial No. 10K8701 to 10K10134 inclusive
1T930 Converter, 5M7864 Pump and 5M7882 Universal Joint parts are shown on Pages 57 and 61
c146162 UEG0729S
5M5800 TORQUE DIVIDER Parts scheme
  For full view, you need register

Parts for your D6C TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  3P-5987 C [1] COVER ASSEM.  
  1A-4672 [1] PLUG  
  5B-5812 [2] DOWEL  
    (PARTS OF COVER ASSEM. 3P5987)
  9M-2008 [1] RING  
  1S-6543 [1] SEAL  
  8B-5964 [1] RACE  
  3S-4388 [1] WASHER  
  5M-7882 Y [1] JOINT ASSEM.  
    (SEE SEPARATE ILLUSTRATION)
  0T-0627 [8] BOLT  
  3B-4506 [8] LOCKWASHER  
  8M-8628 [1] FLANGE  
  6F-4718 [1] SEAL  
  5M-5822 [1] GEAR (43 TEETH)  
  1B-8705 [1] KEY  
  5M-7864 Y [1] PUMP GROUP  
    (SEE SEPARATE ILLUSTRATION)
  1B-4430 [1] NUT  
  3H-0449 [1] LOCK  
  4M-5876 [1] GASKET  
  5M-6604 [1] GASKET  
  1T-0930 Y [1] CONVERTER ASSEM.  
    (SEE SEPARATE ILLUSTRATION)
  9M-1976 [1] RING  
  5M-6208 [1] GEAR (82 TEETH)  
  9M-2028 [1] GEAR (66 TEETH)  
  5H-6480 [1] RING  
  9H-8712 [1] BEARING ASSEM.  
  9M-2014 [1] RACE  
  1M-4102 [1] PLUG  
    (PART OF SHAFT ASSEM. 9S5265)
  9S-5265 [1] SHAFT ASSEM.  
  2D-1523 [1] RING  
  5M-6181 [3] GEAR (23 TEETH)  
  1K-7041 [3] SPRING  
  7M-5734 [6] WASHER  
  2A-3746 [3] PLUG  
  5M-6198 [3] SHAFT  
  1K-6978 [3] SCREW  
  5M-7877 [3] LOCK  
  9S-5267 [1] CARRIER ASSEM.  
  7M-8594 [5] RIVET  
  5M-6178 [2] WASHER  
    (PARTS OF 9S5267 ASSEM.)
  2S-0669 [3] BEARING ASSEM.  
  5M-7878 [1] RING  
  2K-5986 [2] PIN  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Current Draw Of Electric Starting Motors{1453}
Current Draw Of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/06/29

Caterpillar Parts SIS Catalog D6C :

LIGHTING SYSTEM
2P-4029 LIGHTING SYSTEM
8S-1076 LIGHTING SYSTEM
LIGHTING SYSTEM
8S-1076 LIGHTING SYSTEM
2P-4030 LIGHTING SYSTEM
LIGHTING SYSTEM
2P-4030 LIGHTING SYSTEM
7S-7955 LIGHTING SYSTEM
LIGHTING SYSTEM
7S-7955 LIGHTING SYSTEM
SWITCH AS-SOLENOID
4M-1812 SWITCH AS-SOLENOID
LIGHTING SYSTEM
3P-4209 LIGHTING SYSTEM
LIGHTING SYSTEM
3P-4645 LIGHTING SYSTEM
LAMP GP
1M-1882 LAMP GP
LIGHTING SYSTEM
3P-4210 LIGHTING SYSTEM
LIGHTING SYSTEM
3P-4210 LIGHTING SYSTEM
TORQUE CONVERTER GP
1T-0930 TORQUE CONVERTER GP
TORQUE DIVIDER
5M-5800 TORQUE DIVIDER
5M-5800 TORQUE DIVIDER

Truck sale:

Caterpillar D6C
 
Caterpillar D6C
- Crawler dozers
QUINN COMPANY
 
22.000 
Caterpillar D6C, Bulldozer, Bau-Und Bergbauausrüstung


 
25.522 
Caterpillar D6C, Bulldozer, Bau-Und Bergbauausrüstung


Caterpillar D6C, Crawler dozers, Construction
19,500 
Caterpillar D6C, Crawler dozers, Construction
- Crawler dozers
PETERSON CAT
Caterpillar D6C, Construction
13,900 USD 
Caterpillar D6C, Construction
- Crawler dozers
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.