AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

16G MOTOR GRADER 93U00001-01178 (MACHINE) AIR INLET AND EXHAUST SYSTEM Caterpillar SIS



MOTOR GRADER 16G MOTOR GRADER 93U
 16G MOTOR GRADER 93U00001-01178 (MACHINE) UEG0737S 16G 93U   (1973)

Parts group 16G:

  For full view, you need register
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
AIR CLEANER GP
4N-2720 AIR CLEANER GP
4N2720 AIR CLEANER GROUP
DUST EJECTOR GP
4N-8087 DUST EJECTOR GP
4N8087 DUST EJECTOR GROUP
DUST EJECTOR GP
4N-2596 DUST EJECTOR GP
4N2596 DUST EJECTOR GROUP
Part of 9D5415 Noise Suppression Arrangement listed on Page 22
OIL GAUGE FUEL GAUGE AND HEAT INDICATOR
8D-6750 OIL GAUGE FUEL GAUGE AND HEAT INDICATOR
OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR (8D6750 N/S)
Serial No. 93U1 to 93U470 inclusive
8S2541 Indicator parts are shown on Page 191
OIL GAUGE FUEL GAUGE AND HEAT INDICATOR
8D-6750 OIL GAUGE FUEL GAUGE AND HEAT INDICATOR
OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR (8D6750 N/S)
Serial No. 93U471 to 93U562 inclusive
8S2541 Indicator parts are shown on Page 191
OIL GAUGE FUEL GAUGE AND HEAT INDICATOR GROUP
8D-6750 OIL GAUGE FUEL GAUGE AND HEAT INDICATOR GROUP
8D6750 OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR GROUP
Serial No. 93U563 to 93U986 inclusive
8S2541 Indicator parts are shown on Page 191
OIL GAUGE FUEL GAUGE AND HEAT INDICATOR GROUP
8D-6750 OIL GAUGE FUEL GAUGE AND HEAT INDICATOR GROUP
8D6750 OIL GAUGE, FUEL GAUGE AND HEAT INDICATOR GROUP
Serial No. 93U987-Up
8S2541 Indicator parts are shown on Page 191
INDICATOR GP
8S-2541 INDICATOR GP
8S2541 AIR FILTER SERVICE INDICATOR GROUP
Part of 8D6750 Oil Gauge, Fuel Gauge and Heat Indicator Group shown
on Pages 190, 190A and 190B
EXHAUST GP
EXTENSION GP-EXHAUST
4N-4101 EXTENSION GP-EXHAUST
EXHAUST EXTENSION (4N4101 N/S)
EXTENSION GP-EXHAUST
4N-1746 EXTENSION GP-EXHAUST
EXHAUST EXTENSION (4N1746 N/S)
Part of 9D5415 Noise Suppression Arrangement listed on Page 22
LINES GP-AIR
LINES GP-AIR
4N-2597 LINES GP-AIR
4N2597 AIR LINES GROUP
MUFFLER GP
MUFFLER GP
4N-8086 MUFFLER GP
4N8086 MUFFLER GROUP
Serial No. 93U1 to 93U873 inclusive
MUFFLER GP
4N-8086 MUFFLER GP
4N8086 MUFFLER GROUP
Serial No. 93U874-Up
MUFFLER GP
4N-2598 MUFFLER GP
4N2598 MUFFLER GROUP--Type 1
Part of 9D5415 Sound Suppression Arrangement listed on Page 22
MUFFLER GP
4N-2598 MUFFLER GP
4N2598 MUFFLER GROUP--Type 2
Part of 9D5415 Sound Suppression Arrangement listed on Page 22
AN ATTACHMENT
MUFFLER GP
4N-2598 MUFFLER GP
4N2598 MUFFLER GROUP--Type 3
Part of 9D5415 Sound Suppression Arrangement listed on Page 22
AN ATTACHMENT
MUFFLER GP
4N-2598 MUFFLER GP
4N2598 MUFFLER GROUP--Type 4
Part of 9D5415 Sound Suppression Arrangement listed on Page 22
AN ATTACHMENT

Information:

(For parts list, see above)

Specifications
Aftercooler
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Aftercooler
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Special Instruction
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Instructions for Installation of Turbine Precleaners on Products with Dust Ejectors {1055}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Specifications
Air Cleaner
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Dust Ejector Group
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Air Cleaner
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Disassembly and Assembly
Air Cleaner Housing
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Service Magazine
Air Filter Maintenance{1051,1054}
1991/09/30
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Installation Guide for Particulate Trap Exhaust Filters{1091}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Specifications
Exhaust Manifold Shield
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Exhaust Elbow Adapter Group
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Exhaust Extension Group
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Reuse And Salvage Guidelines
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Inspection of Diesel Particulate Filters (DPF), Diesel Oxidation Catalysts (DOC) and CRS Bodies {108F, 1091}
Service Magazine
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Air Filter Maintenance{1051,1054}
1991/09/30
Additional Brackets Used To Improve Support Of Standard Muffler Group{1061,1062}
1992/07/27
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
A Special Instruction, REHS1807 , "Installation Guide for Diesel Particulate Filters" is Available {1089, 1091}
2003/12/15
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Service Magazine
New Air Inlet Manifold Has Longer Bolt Bosses With More Thread Depth To Keep Bolts Tight{1058}
1977/08/08
New Elbow Between Turbocharger And Air Inlet Manifold Has Hole For Ether Starting Aid{1058,1456}
1977/11/21
Air Filter Maintenance{1051,1054}
1991/09/30
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
New Air Inlet Manifold Has Longer Bolt Bosses With More Thread Depth To Keep Bolts Tight{1058}
1977/08/08
New Elbow Between Turbocharger And Air Inlet Manifold Has Hole For Ether Starting Aid{1058,1456}
1977/11/21
Specifications
Exhaust Manifold
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Exhaust Manifold Shield
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Exhaust Manifold
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Exhaust Manifold Shield
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Exhaust Manifold
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Exhaust Manifold
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
New Gasket Used In Exhaust Manifold Group{1059}
1978/09/04
Maintenance Procedure Extends Service Life Of Exhaust Manifold Studs{1050}
1988/12/12
New Exhaust Manifold End And Center Sections Used In Dry Type Exhaust Manifold Groups{1059}
1993/07/26
Stainless Steel Sleeve Assemblies Used In Exhaust Ports {1059}
1996/06/10
Use 165-4638 Guide To Install Exhaust Manifold {1059,0701,0702}
1999/08/30
Grind a Chamfer Around the Exhaust Ports When New 194-8124 Sleeves Are Installed {1059}
2000/10/16
A New Exhaust Gasket Is Now Available {1059}
2006/03/20
Disassembly and Assembly
Inlet Manifold
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Service Magazine
New Air Inlet Manifold Has Longer Bolt Bosses With More Thread Depth To Keep Bolts Tight{1058}
1977/08/08
New Elbow Between Turbocharger And Air Inlet Manifold Has Hole For Ether Starting Aid{1058,1456}
1977/11/21
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
New Air Inlet Manifold Has Longer Bolt Bosses With More Thread Depth To Keep Bolts Tight{1058}
1977/08/08
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
New Elbow Between Turbocharger And Air Inlet Manifold Has Hole For Ether Starting Aid{1058,1456}
1977/11/21
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
New Gasket Used In Exhaust Manifold Group{1059}
1978/09/04
Maintenance Procedure Extends Service Life Of Exhaust Manifold Studs{1050}
1988/12/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Light Green Gasket Material On Secondary Air Filter Elements May Stick To Filter Housing{1054,1051}
1992/02/10
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
New Exhaust Manifold End And Center Sections Used In Dry Type Exhaust Manifold Groups{1059}
1993/07/26
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Installation Guide for Particulate Trap Exhaust Filters{1091}
Installation Guide for Particulate Trap Exhaust Filters{1091}
Yellowmark Noise and Roading Homologation Statement {1062}
Yellowmark Noise and Roading Homologation Statement {1062}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Procedure to Handle and Ship Diesel Particulate Filters (DPF) and Catalytic Converter Mufflers (CCM){1091, 1091}
Specifications
Muffler and Ejector Group
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Muffler and Ejector Group
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Air Filter Maintenance{1051,1054}
1991/09/30
Additional Brackets Used To Improve Support Of Standard Muffler Group{1061,1062}
1992/07/27
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
2W719 Turbocharger Cartridge Repair Kit{1053}
2W719 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
2W715 Turbocharger Cartridge Repair Kit{1053}
7W4872 Turbocharger Cartridge Repair Kit{1053}
7W4872 Turbocharger Cartridge Repair Kit{1053}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Specifications
Turbocharger Impeller Installation (AiResearch Only)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger TV61
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger TV81
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger TW81
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger T12
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger TL81
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Turbocharger
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES EXPANDED TURBOCHARGER AND CARTRIDGE COVERAGE FOR CERTAIN ENGINE MODELS
Disassembly and Assembly
Turbocharger
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Service Magazine
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
New Air Inlet Manifold Has Longer Bolt Bosses With More Thread Depth To Keep Bolts Tight{1058}
1977/08/08
New Elbow Between Turbocharger And Air Inlet Manifold Has Hole For Ether Starting Aid{1058,1456}
1977/11/21
Oversize Bearings For Turbocharger Center Housings Available {1053,1052}
1987/03/30
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
New Plug And O-Ring Can Help Prevent Oil Leakage At The Flywheel Housing Gasket{1157,1307}
1992/09/21
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/09
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Packaging the Turbocharger {1052}
2007/02/26
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
New Air Inlet Manifold Has Longer Bolt Bosses With More Thread Depth To Keep Bolts Tight{1058}
1977/08/08
New Elbow Between Turbocharger And Air Inlet Manifold Has Hole For Ether Starting Aid{1058,1456}
1977/11/21
Special Instruction
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Installation and Operation of the Caterpillar Diesel Particulate Filter (DPF) and the Diagnostic Module for Non-Road Machine Applications (Non-California Applications) {108F, 1091, 7490}
Tool Operating Manual
Compact DPF Cleaner{0599, 0701, 0702, 108F}
Compact DPF Cleaner{0599, 0701, 0702, 108F}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
319-2187 Diesel Particulate Filter (DPF) Cleaner {0374, 0599, 0680, 0701, 0702, 108D}
Service Magazine
Additional Requirements Are Required for Emission Compliance on Replacement Engines {1000, 775E}
2012/09/11
New Tier 1, 2, and 3 Reman Emissions Repower Solutions Are Available for Certain Machines {775E}
2013/04/15
Exhaust Manifold And Air Lines Changes Prevent Broken Studs And Exhaust Leaks {1059,1061}
1981/09/14

Truck sale:

Caterpillar 16G
 
Caterpillar 16G
- motor graders
FINNING CANADA
Caterpillar 16G, motor graders, Construction
 
Caterpillar 16G, motor graders, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Caterpillar 16G
 
Caterpillar 16G
- motor graders
EMPIRE MACHINERY
 
89,900 
Caterpillar 16G, motor graders, Construction

EMPIRE MACHINERY
Caterpillar 16G, motor graders, Construction
31,500 
Caterpillar 16G, motor graders, Construction

ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.