16G MOTOR GRADER 93U00001-01178 (MACHINE) FRAME AND BODY Caterpillar SIS

MOTOR GRADER 16G MOTOR GRADER 93U
16G MOTOR GRADER 93U00001-01178 (MACHINE) UEG0737S 16G 93U (1973)

Parts group 16G:

For full view, you need register

FRAME AND BODY

AXLE GP

8D-2050 FRONT AXLE GROUP

8D2050 FRONT AXLE GROUP--Top View Part 1 of 2
Serial No. 93U1 to 93U751 inclusive

8D-2050 FRONT AXLE GROUP

8D2050 FRONT AXLE GROUP--Sectional View of L.H. Housing Part 2 of 2
Serial No. 93U1 to 93U751 inclusive

8D-2050 FRONT AXLE GROUP

8D2050 FRONT AXLE GROUP--Top View Part 1 of 2
Serial No. 93U752 to 93U1004 and 93U1006 to 93U1050 inclusive

8D-2050 FRONT AXLE GROUP

8D2050 FRONT AXLE GROUP--Sectional View of L.H. Housing Part 2 of 2
Serial No. 93U752 to 93U1004 and 93U1006 to 93U1050 inclusive

8D-2050 FRONT AXLE GROUP

8D2050 FRONT AXLE GROUP--Top View Part 1 of 2
Serial No. 93U1051 to 1058, 1063 to 1070, 1072 to 1081, 1083 to 1095, 1098 to 1100, 1102 to 1106, 1108 to 1110,
1114, 1116, 1118 to 1122, 1127 and 93U1129 to 93U1131 inclusive

8D-2050 FRONT AXLE GROUP

8D2050 FRONT AXLE GROUP--Sectional View of L.H. Housing Part 2 of 2
Serial No. 93U1051 to 1058, 1063 to 1070, 1072 to 1081, 1083 to 1095, 1098 to 1100, 1102 to 1106,
1108 to 1110, 1114, 1116, 1118 to 1122, 1127 and 93U1129 to 93U1131 inclusive

2G-8780 AXLE GP-FRONT

2G8780 FRONT AXLE GROUP--Top View Part 1 of 2
Serial No. 93U1005, 93U1059 to 1062, 1071, 1082, 1096, 1097, 1101, 1107, 1111 to 1113, 1115,
1117, 1123 to 1126, 1128 and 93U1132-Up

2G-8780 AXLE GP-FRONT

2G8780 FRONT AXLE GROUP--Sectional View of L.H. Housing Part 2 of 2
Serial No. 93U1005, 1059 to 1062, 1071, 1082, 1096, 1097, 1101, 1107, 1111 to 1113,
1115, 1117, 1123 to 1126, 1128 and 93U1132-Up

BOX GP-BATTERY

8D-6740 BATTERY BOX GROUP

8D6740 BATTERY BOX GROUP
Serial No. 93U1 to 93U826 inclusive

2G-2915 BATTERY BOX GP

2G2915 BATTERY BOX GROUP
Serial No. 93U827-Up

BUMPER GP

8D-4140 BUMPER GP-REAR

8D4140 REAR BUMPER GROUP
Serial No. 93U1 to 93U1025 inclusive

8D-4140 BUMPER GP-REAR

8D4140 REAR BUMPER GROUP
Serial No. 93U1026-Up

CASE & FRAME GP

8D-3790 CASE & FRAME GP

FRAME AND CASE (8D3790 N/S)
Serial No. 93U1 to 93U571 inclusive

8D-3790 CASE & FRAME GP

8D3790 FRAME AND CASE GROUP
Serial No. 93U572 to 93U1069 inclusive

8D-3790 CASE & FRAME GP

8D3790 FRAME AND CASE GROUP
Serial No. 93U1070-Up

COVER GP

9D-5455 COVER GP-TMSN GAUGE PROTECTION

9D5455 PROTECTION COVER GROUP--Transmission Gauge
AN ATTACHMENT

6G-9000 COVER GP-PROTECTION

6G9000 TRANSMISSION GAUGE PROTECTION COVER GROUP--Replaced 9D5455
AN ATTACHMENT

DOOR GP

9D-6110 HOOD SIDE DOOR GROUP

9D6110 HOOD SIDE DOOR GROUP
Replaced by 2G2770 shown on Pages 90B and 90C
FOR USE WITH 9D2480 AIR CONDITIONER ARRANGEMENT LISTED ON PAGE 186A. AN ATTACHMENT

2G-2770 HOOD SIDE DOOR GROUP

2G2770 HOOD SIDE DOOR GROUP--Part 1 of 2
FOR USE WITH 9D2480 AIR CONDITIONER ARRANGEMENT LISTED ON PAGE 186A. AN ATTACHMENT

2G-2770 HOOD SIDE DOOR GROUP

2G2770 HOOD SIDE DOOR GROUP--Part 2 of 2
FOR USE WITH 9D2480 AIR CONDITIONER ARRANGEMENT LISTED ON PAGE 186A. AN ATTACHMENT

2G-2770 HOOD SIDE DOOR GROUP

2G2770 HOOD SIDE DOOR GROUP--Part 1 of 2--Type 2--Replaced by 2G8080 shown on Pages 90D-2 & 90D-3
FOR USE WITH 9D2480 AIR CONDITIONER ARRANGEMENT LISTED ON PAGE 186A
AN ATTACHMENT

2G-2770 HOOD SIDE DOOR GROUP

2G2770 HOOD SIDE DOOR GROUP--Part 2 of 2--Type 2--Replaced by 2G8080 shown on Pages 90D-2 & 90D-3
FOR USE WITH 9D2480 AIR CONDITIONER ARRANGEMENT LISTED ON PAGE 186A
AN ATTACHMENT

2G-8080 DOOR GP-HOOD SIDE

2G8080 HOOD SIDE DOOR GROUP--Part 1 of 2
FOR USE WITH 9D2480 AIR CONDITIONER ARRANGEMENT LISTED ON PAGE 186A

2G-8080 DOOR GP-HOOD SIDE

2G8080 HOOD SIDE DOOR GROUP--Part 2 of 2
FOR USE WITH 9D2480 AIR CONDITIONER ARRANGEMENT LISTED ON PAGE 186A

9D-4770 HOOD SIDE DOOR GROUP

9D4770 HOOD SIDE DOOR GROUP
Replaced by 2G2260 shown on Pages 90F and 91
AN ATTACHMENT

2G-2260 HOOD SIDE DOOR GROUP

2G2260 HOOD SIDE DOOR GROUP--Part 1 of 2--Type 1
AN ATTACHMENT

2G-2260 HOOD SIDE DOOR GROUP

2G2260 HOOD SIDE DOOR GROUP--Part 2 of 2--Type 1
AN ATTACHMENT

2G-2260 HOOD SIDE DOOR GROUP

2G2260 HOOD SIDE DOOR GROUP--Part 1 of 2--Type 2--Replaced by 2G8070 shown on Pages 91C & 91D
AN ATTACHMENT

2G-2260 HOOD SIDE DOOR GROUP

2G2260 HOOD SIDE DOOR GROUP--Part 2 of 2--Type 2--Replaced by 2G8070 shown on Pages 91C & 91D
AN ATTACHMENT

2G-8070 DOOR GP-HOOD SIDE

2G8070 HOOD SIDE DOOR GROUP--Part 1 of 2
AN ATTACHMENT

2G-8070 DOOR GP-HOOD SIDE

2G8070 HOOD SIDE DOOR GROUP--Part 2 of 2
AN ATTACHMENT

FRAME GP

8D-7270 FRONT FRAME GROUP

8D7270 FRONT FRAME GROUP
Serial No. 93U1 to 93U541 inclusive
Note: 9D5833 Floormat Group is used

8D-7270 FRONT FRAME GROUP

8D7270 FRONT FRAME GROUP
Serial No. 93U542 to 93U643 inclusive
Note: 9D5833 Floormat Group is used

8D-7270 FRONT FRAME GROUP

8D7270 FRONT FRAME GROUP
Serial No. 93U644 to 93U1060 inclusive
Note: 9D5833 Floormat Group is used from Serial No. 93U644 to 93U801,
93U803 to 93U842 and 93U844 to 93U866 inclusive

8D-7270 FRONT FRAME GROUP

8D7270 FRONT FRAME GROUP
Serial No. 93U1061-Up

9D-2455 FRONT FRAME GROUP

9D2455 FRONT FRAME GROUP--Type 1
Part of 8D9760 Blade Control Arrangement listed on Page 170A

9D-2455 FRONT FRAME GROUP

9D2455 FRONT FRAME GROUP--Type 2
Part of 8D9760 Blade Control Arrangement listed on Page 170A

9D-2455 FRONT FRAME GROUP

9D2455 FRONT FRAME GROUP--Type 3
Part of 8D9760 Blade Control Arrangement listed on Page 170A

GUARD GP

8D-4260 RADIATOR GUARD AND SUPPORT GROUP

8D4260 RADIATOR GUARD AND SUPPORT GROUP
Serial No. 93U1 to 93U693 inclusive

8D-4260 RADIATOR GUARD AND SUPPORT GROUP

8D4260 RADIATOR GUARD AND SUPPORT GROUP
Serial No. 93U694-Up

8D-6790 GUARD GP-PLATFORM

8D6790 FRONT PLATFORM GUARD GROUP
Serial No. 93U1 to 93U801, 93U803 to 93U842 and 93U844 to 93U866 inclusive

9D-0210 GUARD GP-PLATFORM

9D210 REAR PLATFORM GUARD GROUP--Type 1
Serial No. 93U1 to 93U801, 93U803 to 93U842 and 93U844 to 93U866 inclusive

9D-0210 GUARD GP-PLATFORM

9D210 REAR PLATFORM GUARD GROUP--Type 2
Serial No. 93U1 to 93U801, 93U803 to 93U842 and 93U844 to 93U866 inclusive

2G-9450 BOTTOM GUARD GROUP

2G9450 BOTTOM GUARD GROUP
CANNOT BE USED WITH RIPPER
AN ATTACHMENT

8D-5550 DRIVE SHAFT GUARD GROUP

8D5550 DRIVE SHAFT GUARD GROUP

HITCH GP

8D-2385 HITCH GP-ARTICULATED

8D2385 ARTICULATED HITCH GROUP

HOOD GP

8D-6860 HOOD GP

8D6860 HOOD GROUP
Serial No. 93U1 to 93U1069 inclusive

8D-6860 HOOD GP

8D6860 HOOD GROUP
Serial No. 93U1070-Up

PLATE GP

9D-3250 PLATE GP-PUSH

9D3250 PUSH PLATE GROUP
AN ATTACHMENT

STEP GP

9D-1415 STEP GP

STEP (9D1415 N/S)

SUPPRESSION GP-SOUND

9D-5415 SUPPRESSION AR-NOISE

9D5415 SOUND SUPPRESSION ARRANGEMENT
AN ATTACHMENT

Information:

(For parts list, see above)

FRAME AND BODY

AXLE GP

Special Instruction

Rebuilding Front Axles, Spindle Housings and Lean Bars{4234, 4313, 5225}
Rebuilding Front Axles, Spindle Housings and Lean Bars{4234, 4313, 5225}

Installation Of Lubricated Front Axle Bearings{7551}
Installation Of Lubricated Front Axle Bearings{7551}

Specifications

Wheel Spindle
14G & 16G MOTOR GRADERS POWER TRAIN

Front Axle
16G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING

Front Axle
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING

Wheel Spindles
14G & 16G MOTOR GRADERS POWER TRAIN

Reuse And Salvage Guidelines

Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225}
Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225}

Disassembly and Assembly

Steering Tie Rod
16G MOTOR GRADER VEHICLE SYSTEMS

Front Axle
16G MOTOR GRADER VEHICLE SYSTEMS

Wheel Spindles
16G MOTOR GRADER VEHICLE SYSTEMS

Wheel Spindle And Wheel Spindle Housing
16G MOTOR GRADER VEHICLE SYSTEMS

Wheel Lean Arms
16G MOTOR GRADER VEHICLE SYSTEMS

Wheel Lean Bar
16G MOTOR GRADER VEHICLE SYSTEMS

Brake And Wheel Spindle Housing
16G POWER TRAIN

Brake And Wheel Spindle Housing
14G & 16G MOTOR GRADERS POWER TRAIN

Brake And Wheel Spindle Housing (16G)
14G & 16G MOTOR GRADERS POWER TRAIN

Steering Tie Rod
14G & 16G MOTOR GRADER VEHICLE SYSTEMS

Wheel Spindles
14G & 16G MOTOR GRADER VEHICLE SYSTEMS

Wheel Spindles And Wheel Spindle Housings
14G & 16G MOTOR GRADER VEHICLE SYSTEMS

Wheel Lean Arms
14G & 16G MOTOR GRADER VEHICLE SYSTEMS

Wheel Lean Bar
14G & 16G MOTOR GRADER VEHICLE SYSTEMS

Front Axle
14G & 16G MOTOR GRADER VEHICLE SYSTEMS

Service Magazine

Oil Changes Not Necessary For Front Wheel Spindle Bearing Housings{4313,4300}
1984/12/10

Change To Front Frame Decreases Stress On Oscillation Bearings{4313,7051}
1977/05/16

Steel Bearings For Front Axle Are Stronger{4313}
1977/06/13

New Lubrication Plate Must Be Installed On Some Motor Graders In The Field That Have Steel Bearings In Front Axle Group{4300}
1978/05/01

Service Front Wheel Spindle Bearing Housings Every 500 Service Hours Or Three Months{4234,7525}
1990/03/05

Basics Of Front Wheel Alignment{4305,4313,4314,4318,4203,5225}
1990/06/25

Adjusting Front Wheel Bearings If The Spindles Are Too Long {4205,4201}
1994/01/24

Larger Retaining Bolts Can Be Used In The Front Axle Group Pivot Pins To Improve Service Life In Severe Applications{4313}
1994/06/27

Guideline for Reusable Parts and Salvage Operations, SEBF8420, "Rebuilding Front Axles, Spindle Housings, and Lean Bars" Is Available {3282}
2010/05/04

Correction to Guideline for Reusable Parts and Salvage Operation , "Rebuilding Front Axles, Spindle Housings, and Lean Bars" {3282}
2000/04/24

Correction to Special Instruction , "Rebuilding Front Axles, Spindle Housings and Lean Bars" {4234, 4313, 5225}
2003/01/20

BOX GP-BATTERY

Special Instruction

Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}

Service Magazine

Dirty Batteries Cause Light In LED's Of EMS Panel With Disconnect Switch Off{7490,1401}
1981/09/21

Maintenance Free Batteries{1401}
1986/03/10

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01

Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

Testing The Starter On The Engine{1401,1450}
1987/05/04

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22

Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05

Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26

High Performance Maintenance Free Battery Available{1401}
1989/01/16

Limitations On Engine Cranking Time{1453,1401}
1989/03/27

Preventive Maintenance For Batteries{1401}
1989/03/27

Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24

Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01

Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01

Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19

BRACKET GP

Torque Check Necessary For Front Support Bracket Bolts When Damper And Pulley Are Removed {1153}
1996/05/13

Guideline For Reusable Parts And Salvage Operations, SEBF8421, "Field Repair Welding Procedure of Centershift Bracket Assembly for 16G and 16H Motor Graders" Is Available {5222}
2000/04/17

BUMPER GP

Disassembly and Assembly

Rear Bumper
16G MOTOR GRADER VEHICLE SYSTEMS

Rear Bumper
14G & 16G MOTOR GRADER VEHICLE SYSTEMS

CASE & FRAME GP

Special Instruction

Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}

Specifications

Frame And Case
14G & 16G MOTOR GRADERS POWER TRAIN

Frame And Case Groups
14G & 16G MOTOR GRADERS POWER TRAIN

Reuse And Salvage Guidelines

Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066}
Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066}

Disassembly and Assembly

Main Frames
16G MOTOR GRADER VEHICLE SYSTEMS

Main Frames
14G & 16G MOTOR GRADER VEHICLE SYSTEMS

Service Magazine

Installation Tips For Snow Wing{6150,7051,1356,7155}
1980/12/22

Different Washers Must Be Used On Motor Graders With Improved Front Frame{7051}
1984/02/27

Stronger Brackets Used To Mount The Hydraulic Implement Control Valves{7050,7051}
1984/05/21

Inspect Articulated Hitch; New Assembly Procedure For Seal Above Tapered Roller Bearing{7051}
1977/03/28

Change To Front Frame Decreases Stress On Oscillation Bearings{4313,7051}
1977/05/16

Improved Frame Has Stronger Boss For Upper Hitch Pivot Pin; Reinforcement Can Be Added To Earlier Frames{7051}
1979/07/09

CHASSIS GP

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

COVER GP

Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20

DOOR GP

Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}
Proper Maintenance Improves Performance of Lock Cylinders {0645, 7273, 7308}

FRAME GP

Special Instruction

Repair And Reinforcement Of Rear Frame At Articulation Joint On Motor Graders{7057}
Repair And Reinforcement Of Rear Frame At Articulation Joint On Motor Graders{7057}

Reuse And Salvage Guidelines

Welding Repair of Motor Grader Frame {0679, 7051}
Welding Repair of Motor Grader Frame {0679, 7051}

Field Repair Welding Procedure of Centershift Bracket Assembly for 16G and 16H Motor Graders{0679, 7052}
Field Repair Welding Procedure of Centershift Bracket Assembly for 16G and 16H Motor Graders{0679, 7052}

Disassembly and Assembly

Main Frames
16G MOTOR GRADER VEHICLE SYSTEMS

Main Frames
14G & 16G MOTOR GRADER VEHICLE SYSTEMS

Service Magazine

Different Washers Must Be Used On Motor Graders With Improved Front Frame{7051}
1984/02/27

Stronger Brackets Used To Mount The Hydraulic Implement Control Valves{7050,7051}
1984/05/21

Change To Front Frame Decreases Stress On Oscillation Bearings{4313,7051}
1977/05/16

Correction to Service Magazine , "Add Gussets To Strengthen Differential Case Assembly Side Plates If Weld Cracks Are Found In Seams" {3283}
2000/07/03

Guideline for Reusable Parts and Salvage and Operations, SEBF8421 , "Field Repair Welding Procedure of Centershift Bracket Assembly for 16G and 16H Motor Graders" Is Available {7050, 7051}
2002/09/23

GUARD GP

Special Instruction

Installation Of Transmission Guard Groups{7153}
Installation Of Transmission Guard Groups{7153}

Disassembly and Assembly

Radiator And Guard (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER

Radiator And Guard (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER

Service Magazine

Installation Tips For Snow Wing{6150,7051,1356,7155}
1980/12/22

Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20

New Bottom Guard Groups Available{7153}
1978/08/21

HITCH GP

Special Instruction

Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}

Installation of Electrical Connectors at The Articulation Joint{1408}
Installation of Electrical Connectors at The Articulation Joint{1408}

Repair And Reinforcement Of Rear Frame At Articulation Joint On Motor Graders{7057}
Repair And Reinforcement Of Rear Frame At Articulation Joint On Motor Graders{7057}

Specifications

Hitch<BR> (Articulation)
16G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING

Articulated Hitch Group
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING

Disassembly and Assembly

Pivot Pin Bearings
16G MOTOR GRADER VEHICLE SYSTEMS

Pivot Pin Bearings
14G & 16G MOTOR GRADER VEHICLE SYSTEMS

Service Magazine

Improved Charging Valve For Accumulators And Suspension Cylinders{7107,7201}
1985/06/17

Inspect Articulated Hitch; New Assembly Procedure For Seal Above Tapered Roller Bearing{7051}
1977/03/28

Improved Frame Has Stronger Boss For Upper Hitch Pivot Pin; Reinforcement Can Be Added To Earlier Frames{7051}
1979/07/09

LINK GP-STEERING

Reuse And Salvage Guidelines

Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225}
Rebuilding Front Axles, Spindle Housings, Leaning Arms, and Lean Bars {4313, 5211, 5225}

Disassembly and Assembly

Steering Tie Rod
16G MOTOR GRADER VEHICLE SYSTEMS

Steering Tie Rod
14G & 16G MOTOR GRADER VEHICLE SYSTEMS

Service Magazine

Basics Of Front Wheel Alignment{4305,4313,4314,4318,4203,5225}
1990/06/25

LUBRICATION GP

New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/20

MISCELLANEOUS INFORMATION

Special Instruction

Repair And Reinforcement Of Rear Frame At Articulation Joint On Motor Graders{7057}
Repair And Reinforcement Of Rear Frame At Articulation Joint On Motor Graders{7057}

Service Magazine

Installation Tips For Snow Wing{6150,7051,1356,7155}
1980/12/22

New Blade Tip Brackets Used With New Circle And Beam Assembly For Stronger Blade Support{5254,6154}
1981/06/22

Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20

New, Narrower Blade Tip Brackets Used{5254,6154}
1982/10/11

Oil Changes Not Necessary For Front Wheel Spindle Bearing Housings{4313,4300}
1984/12/10

Improved Charging Valve For Accumulators And Suspension Cylinders{7107,7201}
1985/06/17

New Bottom Guard Groups Available{7153}
1978/08/21

New 1U6539 And 1U6540 Hand Taps And 6V7052 Rethreading Die Available{0671,4202,4210}
1988/02/29

Service Front Wheel Spindle Bearing Housings Every 500 Service Hours Or Three Months{4234,7525}
1990/03/05

Improved Seals Used; Seal Replacement In Folded Core Radiators{1353}
1990/06/04

Basics Of Front Wheel Alignment{4305,4313,4314,4318,4203,5225}
1990/06/25

New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes{1209,1210}
1994/06/20

PUMP GP-LUBRICATION

Reuse And Salvage Guidelines

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

SEAL GP

Special Instruction

Assembly and Installation of Inverted Duo-Cone Seals{7561}
Assembly and Installation of Inverted Duo-Cone Seals{7561}

STEP GP

Service Magazine

Fabricated Ladder Improves Work Conditions{0690}
1977/08/22

Rubber Belted Steps Used{7254}
1989/09/11

STRUCTURAL GP

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

TOOLS

Tool Operating Manual

NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}

NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}
NEHS1259: 469-7632 Swing Gearbox Lifting Tool for 6015-6090 Hydraulic Mining Shovel {0629, 7000}

SUSPENSION GP

Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}
Assembly of 175-5507 and 361-3889 Nitrogen Charging Groups and 175-7410 Auxiliary Fitting Group{0647, 7200}

NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}
NEHS1214: 455-0126 Nitrogen Booster Pump Group {0374, 0599, 0647, 0756, 4263, 4331, 5077, 7200}

Service Magazine

Improved Charging Valve For Accumulators And Suspension Cylinders{7107,7201}
1985/06/17

Truck sale:

Caterpillar 16G
- motor graders
FINNING CANADA

Caterpillar 16G, motor graders, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.

Caterpillar 16G
- motor graders
EMPIRE MACHINERY

89,900

Caterpillar 16G, motor graders, Construction

EMPIRE MACHINERY

31,500

Caterpillar 16G, motor graders, Construction

ALTORFER INDUSTRIES