AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

16G MOTOR GRADER 93U00001-01178 (MACHINE) FUEL SYSTEM Caterpillar SIS



MOTOR GRADER 16G MOTOR GRADER 93U
 16G MOTOR GRADER 93U00001-01178 (MACHINE) UEG0737S 16G 93U   (1973)

Parts group 16G:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8D-5130 CONTROL GP-GOVERNOR
GOVERNOR CONTROL (8D5130 N/S)--Part 1 of 3
Serial No. 93U1 to 93U541 inclusive
CONTROL GP-GOVERNOR
8D-5130 CONTROL GP-GOVERNOR
GOVERNOR CONTROL (8D5130 N/S)--Part 2 of 3
Serial No. 93U1 to 93U541 inclusive
CONTROL GP-GOVERNOR
8D-5130 CONTROL GP-GOVERNOR
GOVERNOR CONTROL (8D5130 N/S)--Part 3 of 3
Serial No. 93U1 to 93U541 inclusive
CONTROL GP-GOVERNOR
8D-5130 CONTROL GP-GOVERNOR
8D5130 GOVERNOR CONTROL GROUP--Part 1 of 3
Serial No. 93U542 to 93U1166 inclusive
CONTROL GP-GOVERNOR
8D-5130 CONTROL GP-GOVERNOR
8D5130 GOVERNOR CONTROL GROUP--Part 2 of 3
Serial No. 93U542 to 93U1166 inclusive
CONTROL GP-GOVERNOR
8D-5130 CONTROL GP-GOVERNOR
8D5130 GOVERNOR CONTROL GROUP--Part 3 of 3
Serial No. 93U542 to 93U1166 inclusive
CONTROL GP-GOVERNOR
8D-5130 CONTROL GP-GOVERNOR
8D5130 GOVERNOR CONTROL GROUP--Part 1 of 3
Serial No. 93U1167-Up
CONTROL GP-GOVERNOR
8D-5130 CONTROL GP-GOVERNOR
8D5130 GOVERNOR CONTROL GROUP--Part 2 of 3
Serial No. 93U1167-Up
CONTROL GP-GOVERNOR
8D-5130 CONTROL GP-GOVERNOR
8D5130 GOVERNOR CONTROL GROUP--Part 3 of 3
Serial No. 93U1167-Up
LINES GP-FUEL
FUEL LINES GROUP
8D-6755 FUEL LINES GROUP
8D6755 FUEL LINES GROUP
Serial No. 93U1 to 93U627 inclusive
FUEL LINES GROUP
2G-0950 FUEL LINES GROUP
2G950 FUEL LINES GROUP
Serial No. 93U628 to 93U1069 inclusive
FUEL LINES GROUP
2G-0950 FUEL LINES GROUP
2G950 FUEL LINES GROUP
Serial No. 93U1070-Up
TANK GP-FUEL
TANK GP-FUEL
8D-4970 TANK GP-FUEL
8D4970 FUEL TANK GROUP
Serial No. 93U1 to 93U627 inclusive
TANK GP-FUEL
8D-4970 TANK GP-FUEL
8D4970 FUEL TANK GROUP
Serial No. 93U628 to 93U783 inclusive
TANK GP-FUEL
8D-4970 TANK GP-FUEL
8D4970 FUEL TANK GROUP
Serial No. 93U784 to 93U980 inclusive
TANK GP-FUEL
8D-4970 TANK GP-FUEL
8D4970 FUEL TANK GROUP
Serial No. 93U981-Up
PROTECTION COVER GROUP
5D-1920 PROTECTION COVER GROUP
5D1920 PROTECTION COVER GROUP--Fuel Tank Cap
AN ATTACHMENT
FAST FILL FUEL ADAPTER GROUP
9D-3510 FAST FILL FUEL ADAPTER GROUP
9D3510 FAST FILL FUEL ADAPTER GROUP--Type 1
9D630 Cover parts are shown on Page 104A
AN ATTACHMENT
FAST FILL FUEL ADAPTER GROUP
9D-3510 FAST FILL FUEL ADAPTER GROUP
9D3510 FAST FILL FUEL ADAPTER GROUP--Type 2
9D630 Cover parts are shown on Page 104A
AN ATTACHMENT
FAST FILL FUEL ADAPTER GROUP
9D-5565 FAST FILL FUEL ADAPTER GROUP
9D5565 FAST FILL FUEL ADAPTER GROUP--Type 1
FOR USE WITH 9D5415 NOISE SUPPRESSION ARRANGEMENT LISTED
ON PAGE 22. AN ATTACHMENT
FAST FILL FUEL ADAPTER GROUP
9D-5565 FAST FILL FUEL ADAPTER GROUP
9D5565 FAST FILL FUEL ADAPTER GROUP--Type 2
FOR USE WITH 9D5415 NOISE SUPPRESSION ARRANGEMENT LISTED
ON PAGE 22. AN ATTACHMENT
FAST FILL FUEL ADAPTER GROUP
9D-3515 FAST FILL FUEL ADAPTER GROUP
9D3515 FAST FILL FUEL ADAPTER GROUP
AN ATTACHMENT
COVER-DUST
9D-0630 COVER-DUST
9D630 DUST COVER GROUP
Part of 9D3510, 9D5565 and 2G2960 Fast Fill Fuel Adapter Groups
shown on Pages 103, 104 and 105
ADAPTER GP-FAST FILL FUEL
2G-2960 ADAPTER GP-FAST FILL FUEL
2G2960 FAST FILL FUEL ADAPTER GROUP--Type 1
9D630 Cover parts are shown on Page 104A
AN ATTACHMENT
ADAPTER GP-FAST FILL FUEL
2G-2960 ADAPTER GP-FAST FILL FUEL
2G2960 FAST FILL FUEL ADAPTER GROUP--Type 2
9D630 Cover and 2G9000 Adapter parts are shown on Pages 104A and 105B
ADAPTER GP-FAST FILL FUEL
2G-9000 ADAPTER GP-FAST FILL FUEL
2G9000 FAST FILL ADAPTER GROUP
Part of 2G2960 Fast Fill Fuel Adapter Group shown on Page 105
FAST FILL FUEL ADAPTER GROUP
9D-5665 FAST FILL FUEL ADAPTER GROUP
9D5665 FAST FILL FUEL ADAPTER GROUP
FOR USE WITH 9D5415 SOUND SUPPRESSION ARRANGEMENT LISTED ON PAGE 22
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
Service Magazine
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Fuel Ratio Control
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
New Adjustment Pin And Valve Seal Used In Fuel Ratio Control{1278}
1977/07/11
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Fuel Ratio Control
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Service Magazine
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Fuel Ratio Control<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Ratio Control
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Ratio Control
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Fuel Ratio Control
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Ratio Control (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Ratio Control (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Ratio Control
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Possible Cause Of A Low Idle Misfire And/Or Backfire{1278,1076,1250}
1980/05/12
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
New Adjustment Pin And Valve Seal Used In Fuel Ratio Control{1278}
1977/07/11
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Cat&reg; Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Machine Engines {1251, 1278}
2014/09/04
Cat<SUP>&reg;</SUP> Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Machine Applications {1278}
2015/06/25
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Switch (Governor)<BR> (3T3132)
"G" SERIES MOTOR GRADERS SUPPLEMENTAL STEERING SYSTEM
Governor Switch<BR> 3T3132
"G" SERIES MOTOR GRADERS SUPPLEMENTAL STEERING SYSTEM
Testing and Adjusting
Testing And Adjusting
12G, 14G, 16G, 120G, 130G & 140G MOTOR GRADERS GOVERNOR LINK
Testing And Adjusting
SUPPLEMENT FOR 12G, 14G, 16G, 120G, 130G & 140G MOTOR GRADER
Service Magazine
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Adjustment Procedure For Governor Control Linkage{1265,1269,1250}
1985/02/11
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Purpose Of Governor Decelerator Linkage And Its Adjustment{1265,1269,1276}
1988/09/19
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Purpose Of Governor Decelerator Linkage And Its Adjustment{1265,1269,1276}
1993/07/12
Effort Needed To Depress And Hold The Foot Accelerator Pedal Can Be Reduced{1265,1250}
1993/11/09
Grease Fitting Can Be Installed To Lubricate The Governor Control Group Linkage {1265}
1994/04/25
Specifications
Drive For Fuel Transfer Pump And Tachometer
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Tachometer Drive
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Engine News
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Special Instruction
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Specifications
Secondary Fuel Filter Base - 16G Motor Grader Only
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Primary Fuel Filter
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Filter Base
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Primary Fuel Filter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Filter Base
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Primary Fuel Filter Base (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Primary Fuel Filter Base (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Filter Base (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Filter Base (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Filter &amp; Base
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/03/28
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Improved Seal on Fuel Filter {1261}
2005/09/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2007/07/30
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Special Instruction
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Magazine
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250}
1998/06/22
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Governor<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Governor and Fuel Pump Drive Group (Automatic Timing Advance Unit)<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Governor
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Tachometer Drive
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Air Compressor Governor<BR> (Bendix Corp. 287308)
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Switch (Governor)<BR> (3T3132)
"G" SERIES MOTOR GRADERS SUPPLEMENTAL STEERING SYSTEM
Governor Switch<BR> 3T3132
"G" SERIES MOTOR GRADERS SUPPLEMENTAL STEERING SYSTEM
Fuel Transfer Pump
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive Group<BR> Automatic Timing Advance Unit
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Automatic Timing Advance (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Automatic Timing Advance (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Automatic Timing Advance (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pumps (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump And Governor Drive (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing And Governor (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing And Governor (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing And Governor (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Governor (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Governor (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing &amp; Governor
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Governor
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Fuel Ratio Control
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
New Timing Advance Weight Used{1272,1288,1286,1264}
1980/10/06
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group{1272,1288}
1981/12/14
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Adjustment Procedure For Governor Control Linkage{1265,1269,1250}
1985/02/11
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
New Torque Control Group Used In Governor And Fuel Injection Group To Increase Torque Rise{1264}
1977/04/11
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Design Seals Decrease Shaft Wear In Fuel Transfer Pump{1256}
1978/08/28
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Purpose Of Governor Decelerator Linkage And Its Adjustment{1265,1269,1276}
1988/09/19
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Purpose Of Governor Decelerator Linkage And Its Adjustment{1265,1269,1276}
1993/07/12
Fuel Injection Pump Improvements{1251}
1994/02/07
Grease Fitting Can Be Installed To Lubricate The Governor Control Group Linkage {1265}
1994/04/25
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25
New Governor Weight And Race Increase Durability{1264}
1996/09/30
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/04
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/17
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/08
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Special Instruction
Installation Of 1N4440, 8N9527, 8N9751 Or 8N9752 Fuel Heater Groups{1296}
Installation Of 1N4440, 8N9527, 8N9751 Or 8N9752 Fuel Heater Groups{1296}
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Elbow Between Turbocharger And Air Inlet Manifold Has Hole For Ether Starting Aid{1058,1456}
1977/11/21
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Nozzle And Adapter (Later Engines)<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter (Earlier Engines)<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Secondary Fuel Filter Base - 16G Motor Grader Only
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Primary Fuel Filter
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Filter Base
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Disassembly and Assembly
Fuel Injection Valves (Precombustion Chamber)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Valves (Direct Injection)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Valve Adapters
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Ratio Control
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Possible Cause Of A Low Idle Misfire And/Or Backfire{1278,1076,1250}
1980/05/12
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position{1106,1252}
1984/04/09
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
New Adjustment Pin And Valve Seal Used In Fuel Ratio Control{1278}
1977/07/11
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/03/28
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
New O-Ring Seals Used On &quot;Through-Head-Adapter&quot; And &quot;Internal Fuel Lines&quot; In Fuel Injection Lines Groups{1252}
1996/10/21
New Fuel Line Support Brackets Help Eliminate Vibration {1252}
1997/12/01
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Lines (Later Engines)<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Lines (Earlier Engines)<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter (Later Engines)<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter (Earlier Engines)<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Lines
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Lines
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Disassembly and Assembly
Fuel Injection Lines (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Lines (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Line Adapters
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Nozzles (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Nozzle Adapters (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Nozzles And Adapters (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Valves (Precombustion Chamber)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Valves (Direct Injection)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Valve Adapters
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Lines
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzles &amp; Adapters
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position{1106,1252}
1984/04/09
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
New O-Ring Seals Used On &quot;Through-Head-Adapter&quot; And &quot;Internal Fuel Lines&quot; In Fuel Injection Lines Groups{1252}
1996/10/21
New Fuel Line Support Brackets Help Eliminate Vibration {1252}
1997/12/01
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/01
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Machines {1250, 1251, 1290, 1713}
2013/10/17
Disassembly and Assembly
Fuel Ratio Control
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Ratio Control (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Ratio Control (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Ratio Control
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Possible Cause Of A Low Idle Misfire And/Or Backfire{1278,1076,1250}
1980/05/12
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
Improvements Made To Fuel Ratio Control {1278}
1982/11/29
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
New Adjustment Pin And Valve Seal Used In Fuel Ratio Control{1278}
1977/07/11
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Special Instruction
Installation Of 1N4440, 8N9527, 8N9751 Or 8N9752 Fuel Heater Groups{1296}
Installation Of 1N4440, 8N9527, 8N9751 Or 8N9752 Fuel Heater Groups{1296}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Possible Cause Of A Low Idle Misfire And/Or Backfire{1278,1076,1250}
1980/05/12
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
New Timing Advance Weight Used{1272,1288,1286,1264}
1980/10/06
New Vent Assembly Used In Fast Fill Fuel Adapter Groups; New Vent Repair Kit Available{1273}
1980/10/27
Inspection And Test Procedures To Follow When Fuel Ratio Control Does Not Operate Correctly{1278}
1981/01/19
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group{1272,1288}
1981/12/14
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
New Diaphragm Used In Fuel Ratio Control{1278}
1982/03/15
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Added Methods To Decrease The Effects Of High Sulfur Fuels{1355,1280,1318,1000}
1982/08/30
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position{1106,1252}
1984/04/09
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Adjustment Procedure For Governor Control Linkage{1265,1269,1250}
1985/02/11
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Location Of 6V5135 Setscrews In Fuel Pump Group{1250}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Faster Response Water Temperature Regulators; Service Simplified{1350,1355}
1985/11/25
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Fuel Dilution Troubleshooting Procedure{1250}
1986/12/22
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New Torque Control Group Used In Governor And Fuel Injection Group To Increase Torque Rise{1264}
1977/04/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Elbow Between Turbocharger And Air Inlet Manifold Has Hole For Ether Starting Aid{1058,1456}
1977/11/21
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Design Seals Decrease Shaft Wear In Fuel Transfer Pump{1256}
1978/08/28
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Purpose Of Governor Decelerator Linkage And Its Adjustment{1265,1269,1276}
1988/09/19
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly{0654,1250}
1979/04/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
5P7437 Adapter (Part Of 8T5301 Diesel Timing Adapter Group) Must Be Modified To Work On Current Fuel Lines.{0782}
1992/02/03
New Fuel Line Assemblies And Adapter Assembly Used{1252}
1992/02/17
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
Purpose Of Governor Decelerator Linkage And Its Adjustment{1265,1269,1276}
1993/07/12
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568}
1997/08/18
New Guideline For Product Information, SEBF8340, &quot; Fuel Systems Troubleshooting Guide For 3204, 3300, And 3400 Engines With New Scroll Fuel Systems (NSFS)&quot; Available {0374,1250}
1998/06/22
Special Instruction
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Specifications
Fuel Injection Nozzle And Adapter (Later Engines)<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter (Earlier Engines)<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Disassembly and Assembly
Fuel Injection Line Adapters
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Nozzles (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Nozzle Adapters (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Nozzles And Adapters (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Valves (Precombustion Chamber)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Valves (Direct Injection)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Valve Adapters
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Nozzles &amp; Adapters
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position{1106,1252}
1984/04/09
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
New O-Ring Seals Used On &quot;Through-Head-Adapter&quot; And &quot;Internal Fuel Lines&quot; In Fuel Injection Lines Groups{1252}
1996/10/21
Special Instruction
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Test Sequence for Capsule Type Fuel Nozzles{0782}
Specifications
Fuel Injection Nozzle And Adapter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Disassembly and Assembly
Fuel Injection Nozzles &amp; Adapters
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
The Procedure for the Installation of the Electronic Unit Injector has changed. {1290}
2014/05/08
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
3406 New Scroll Fuel System (NSFS) Camshaft Plugs{1110}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Remanufactured Fuel Injection Nozzles
Remanufactured Fuel Injection Nozzles
Valve Bonnets with Insufficient Hardness
Valve Bonnets with Insufficient Hardness
Specifications
New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter (Later Engines)<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Nozzle And Adapter (Earlier Engines)<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Governor and Fuel Pump Drive Group (Automatic Timing Advance Unit)<BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel System Identification
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Automatic Timing Advance Unit
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Tachometer Drive
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Air Compressor Governor<BR> (Bendix Corp. 287308)
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Switch (Governor)<BR> (3T3132)
"G" SERIES MOTOR GRADERS SUPPLEMENTAL STEERING SYSTEM
Fuel Injection Nozzle And Adapter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive Group<BR> Automatic Timing Advance Unit
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Disassembly and Assembly
Automatic Timing Advance (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Automatic Timing Advance (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Automatic Timing Advance (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pumps (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump And Governor Drive (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing And Governor (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing And Governor (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing And Governor (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Governor (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Governor (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Automatic Timing Advance
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing &amp; Governor
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pumps
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
New Timing Advance Weight Used{1272,1288,1286,1264}
1980/10/06
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group{1272,1288}
1981/12/14
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position{1106,1252}
1984/04/09
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Location Of 6V5135 Setscrews In Fuel Pump Group{1250}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Use Insert To Repair Bearing Seat In Water Pump Housing{1361}
1977/03/07
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New Torque Control Group Used In Governor And Fuel Injection Group To Increase Torque Rise{1264}
1977/04/11
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
New Elbow Between Turbocharger And Air Inlet Manifold Has Hole For Ether Starting Aid{1058,1456}
1977/11/21
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Design Seals Decrease Shaft Wear In Fuel Transfer Pump{1256}
1978/08/28
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Purpose Of Governor Decelerator Linkage And Its Adjustment{1265,1269,1276}
1993/07/12
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
Fuel Injection Pump Improvements{1251}
1994/02/07
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25
New Governor Weight And Race Increase Durability{1264}
1996/09/30
New O-Ring Seals Used On &quot;Through-Head-Adapter&quot; And &quot;Internal Fuel Lines&quot; In Fuel Injection Lines Groups{1252}
1996/10/21
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/04
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/17
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/08
The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290}
2004/05/10
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/01
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Machine Engines {1251, 1290}
2012/07/09
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Machines {1250, 1251, 1290, 1713}
2013/10/17
Cat&reg; Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Machine Engines {1251, 1278}
2014/09/04
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Disassembly and Assembly
Fuel Priming Pump (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Priming Pump (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Service Magazine
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Fuel Transfer Pump Improved{1256}
1985/10/14
Gasket Leakage On Aftermarket Fuel Filters{1261}
1985/12/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Design Seals Decrease Shaft Wear In Fuel Transfer Pump{1256}
1978/08/28
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Improved 1R-0712 Fuel Filter Provides Improved Sealing{1261}
1994/03/28
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Specifications
Fuel Transfer Pump <BR> New Scroll Fuel System
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Transfer Pump
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Drive For Fuel Transfer Pump And Tachometer
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Air Compressor Governor<BR> (Bendix Corp. 287308)
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Switch (Governor)<BR> (3T3132)
"G" SERIES MOTOR GRADERS SUPPLEMENTAL STEERING SYSTEM
Fuel Transfer Pump
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Injection Pump Housing
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Governor And Fuel Pump Drive Group<BR> Automatic Timing Advance Unit
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Disassembly and Assembly
Automatic Timing Advance (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Automatic Timing Advance (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Automatic Timing Advance (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pumps (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump And Governor Drive (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing And Governor (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing And Governor (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Injection Pump Housing And Governor (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Governor (Earlier)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Governor (Later)
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Fuel Transfer Pump
3406C DIESEL ENGINES FOR CATERPILLAR BUILT MACHINES
Service Magazine
New Timing Advance Weight Used{1272,1288,1286,1264}
1980/10/06
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group{1272,1288}
1981/12/14
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Location Of 6V5135 Setscrews In Fuel Pump Group{1250}
1985/08/12
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
New Torque Control Group Used In Governor And Fuel Injection Group To Increase Torque Rise{1264}
1977/04/11
Improved Fuel Priming Pump Used{1258}
1987/04/20
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
New Design Seals Decrease Shaft Wear In Fuel Transfer Pump{1256}
1978/08/28
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Bonnet Used In Fuel Injection Pump Group {1251}
1993/06/14
Purpose Of Governor Decelerator Linkage And Its Adjustment{1265,1269,1276}
1993/07/12
Fuel Injection Pump Improvements{1251}
1994/02/07
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25
New Governor Weight And Race Increase Durability{1264}
1996/09/30
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/04
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/17
3406C Pump And Governor Changes Provide Improved Oil And Fuel Leak Resistence{7555}
1997/09/08
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Service Magazine
Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines{0650,1264,1257,1278}
1984/03/26
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10

Truck sale:

Caterpillar 16G
 
Caterpillar 16G
- motor graders
FINNING CANADA
Caterpillar 16G, motor graders, Construction
 
Caterpillar 16G, motor graders, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Caterpillar 16G
 
Caterpillar 16G
- motor graders
EMPIRE MACHINERY
 
89,900 
Caterpillar 16G, motor graders, Construction

EMPIRE MACHINERY
Caterpillar 16G, motor graders, Construction
31,500 
Caterpillar 16G, motor graders, Construction

ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.