AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

16G MOTOR GRADER 93U00001-01178 (MACHINE) POWER TRAIN Caterpillar SIS



MOTOR GRADER 16G MOTOR GRADER 93U
 16G MOTOR GRADER 93U00001-01178 (MACHINE) UEG0737S 16G 93U   (1973)

Parts group 16G:

  For full view, you need register
POWER TRAIN
CHAIN GP
CHAIN GROUP
8D-1710 CHAIN GROUP
8D1710 CHAIN GROUP
CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
8D-5215 CONTROL GP-CLUTCH
CLUTCH CONTROL (8D5215 N/S)
CONTROL GP-DIFFERENTIAL LOCK
DIFFERENTIAL LOCK CONTROL GROUP
8D-5240 DIFFERENTIAL LOCK CONTROL GROUP
8D5240 DIFFERENTIAL LOCK CONTROL GROUP
Serial No. 93U1 to 93U754 inclusive
2P7014 and 8D6813 Valve parts are shown on Page 76
DIFFERENTIAL LOCK CONTROL GROUP
8D-5240 DIFFERENTIAL LOCK CONTROL GROUP
8D5240 DIFFERENTIAL LOCK CONTROL GROUP
Serial No. 93U755 to 93U927 inclusive
8D6813 and 6P8226 Valve parts are shown on Pages 76 and 76A
DIFFERENTIAL LOCK CONTROL GROUP
8D-5240 DIFFERENTIAL LOCK CONTROL GROUP
8D5240 DIFFERENTIAL LOCK CONTROL GROUP
Serial No. 93U928 to 93U1069 inclusive
8D6813 and 6P8226 Valve parts are shown on Pages 76 and 76A
DIFFERENTIAL LOCK CONTROL GROUP
2G-6035 DIFFERENTIAL LOCK CONTROL GROUP
2G6035 DIFFERENTIAL LOCK CONTROL GROUP
Serial No. 93U1070-Up
8D6813 and 6P8226 Valve parts are shown on Pages 76 and 76A
DIFFERENTIAL LOCK VALVE GROUP
2P-7014 DIFFERENTIAL LOCK VALVE GROUP
2P7014 DIFFERENTIAL LOCK VALVE GROUP
Serial No. 93U1 to 93U754 inclusive
Part of 8D5240 Differential Lock Control Group shown on Page 75
DIFFERENTIAL LOCK VALVE GROUP
6P-8226 DIFFERENTIAL LOCK VALVE GROUP
6P8226 DIFFERENTIAL LOCK VALVE GROUP
Serial No. 93U775-Up
Part of 8D5240 Differential Lock Control Group shown on Pages 75A and 75B
CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
2P-5810 CONTROL GP-TRANSMISSION HYD
2P5810 TRANSMISSION HYDRAULIC CONTROL GROUP
Part of 3P300 Transmission Arrangement shown on Page 50
2P5812 and 2P5811 Valve parts are shown on Pages 60A through 62A
DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
8D-4290 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL AND BEVEL GEAR (8D4290 N/S)--Part 1 of 2
Serial No. 93U1 to 93U529 inclusive
8D4300 Differential parts are shown on Page 74
DIFFERENTIAL & BEVEL GEAR GP
8D-4290 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL AND BEVEL GEAR (8D4290 N/S)--Part 2 of 2
Serial No. 93U1 to 93U529 inclusive
DIFFERENTIAL & BEVEL GEAR GP
8D-4290 DIFFERENTIAL & BEVEL GEAR GP
8D4290 DIFFERENTIAL AND BEVEL GEAR GROUP--Part 1 of 2
Serial No. 93U530 to 93U713 inclusive
8D4300 Differential parts are shown on Page 74
DIFFERENTIAL & BEVEL GEAR GP
8D-4290 DIFFERENTIAL & BEVEL GEAR GP
8D4290 DIFFERENTIAL AND BEVEL GEAR GROUP--Part 2 of 2
Serial No. 93U530 to 93U713 inclusive
DIFFERENTIAL & BEVEL GEAR GP
8D-4290 DIFFERENTIAL & BEVEL GEAR GP
8D4290 DIFFERENTIAL AND BEVEL GEAR GROUP--Part 1 of 2
Serial No. 93U714 to 93U1107 inclusive
8D4300 Differential parts are shown on Page 74
DIFFERENTIAL & BEVEL GEAR GP
8D-4290 DIFFERENTIAL & BEVEL GEAR GP
8D4290 DIFFERENTIAL AND BEVEL GEAR GROUP--Part 2 of 2
Serial No. 93U714 to 93U1107 inclusive
DIFFERENTIAL & BEVEL GEAR GP
8D-4290 DIFFERENTIAL & BEVEL GEAR GP
8D4290 DIFFERENTIAL AND BEVEL GEAR GROUP--Part 1 of 2
Serial No. 93U1108-Up
8D4300 Differential parts are shown on Page 74
DIFFERENTIAL & BEVEL GEAR GP
8D-4290 DIFFERENTIAL & BEVEL GEAR GP
8D4290 DIFFERENTIAL AND BEVEL GEAR GROUP--Part 2 of 2
Serial No. 93U1108-Up
DIFFERENTIAL GP
8D-4300 DIFFERENTIAL GP
8D4300 DIFFERENTIAL GROUP
Part of Differential & Bevel Gear shown on Page 72
FILLER GP-POWER TRAIN OIL
COVER GP-TMSN GAUGE PROTECTION
9D-5455 COVER GP-TMSN GAUGE PROTECTION
9D5455 PROTECTION COVER GROUP--Transmission Gauge
AN ATTACHMENT
COVER GP-PROTECTION
6G-9000 COVER GP-PROTECTION
6G9000 TRANSMISSION GAUGE PROTECTION COVER GROUP--Replaced 9D5455
AN ATTACHMENT
FILLER GP-POWER TRAIN OIL
8D-5820 FILLER GP-POWER TRAIN OIL
8D5820 TRANSMISSION OIL FILLER GROUP
FILTER GP
TRANSMISSION FILTER GROUP
1P-8253 TRANSMISSION FILTER GROUP
1P8253 TRANSMISSION FILTER GROUP
1P8249 Base is replaced by 6P2218. Serial No. 93U1 to 602, 606, 608 to 610, 616,
623, 630, 637 and 93U640 inclusive. Part of 3P300 Transmission Arrangement
shown on Page 50
FILTER BASE SERVICE GROUP
6P-2218 FILTER BASE SERVICE GROUP
6P2218 FILTER BASE SERVICE GROUP
Serial No. 93U1 to 602, 606, 608 to 610, 616, 623, 630, 637 and 93U640 inclusive
Note: Provides Field Replacement for 1P8249 Base shown on Page 67B
FILTER GP-TRANSMISSION
6P-2091 FILTER GP-TRANSMISSION
6P2091 TRANSMISSION FILTER GROUP
Serial No. 93U603, 604, 605, 607, 611 to 615, 617 to 622, 624 to 629, 631 to 636,
638, 639 and 93U641-Up. Part of 3P300 Transmission Arrangement shown
on Page 50A
GEAR GP
CASE & TRANSFER GEAR GP
2P-6900 CASE & TRANSFER GEAR GP
TRANSFER CASE AND GEAR (2P6900 N/S)--Part 1 of 3
Serial No. 93U1 to 93U534 and 93U538 inclusive. Part of 3P300 Transmission
Arrangement shown on Page 50. 2P6899 Transmission Case parts are shown
on Page 54
CASE & TRANSFER GEAR GP
2P-6900 CASE & TRANSFER GEAR GP
TRANSFER CASE AND GEAR (2P6900 N/S) Part 2 of 3
Serial No. 93U1 to 93U534 and 93U538 inclusive
Part of 3P300 Transmission Arrangement shown on Pages 50 and 50A
CASE & TRANSFER GEAR GP
2P-6900 CASE & TRANSFER GEAR GP
TRANSFER CASE AND GEAR (2P6900 N/S)--Part 3 of 3
Serial No. 93U1 to 93U534 and 93U538 inclusive
Part of 3P300 Transmission Arrangement shown on Page 50
CASE & TRANSFER GEAR GP
2P-6900 CASE & TRANSFER GEAR GP
2P6900 TRANSFER CASE AND GEAR GROUP--Part 1 of 3
Serial No. 93U535 to 93U537 and 93U539 to 93U1157 inclusive
Part of 3P300 Transmission Arrangement shown on Pages 50 and 50A
2P6899 Transmission Case parts are shown on Page 54
CASE & TRANSFER GEAR GP
2P-6900 CASE & TRANSFER GEAR GP
2P6900 TRANSFER CASE AND GEAR GROUP--Part 2 of 3
Serial No. 93U535 to 93U537 and 93U539 to 93U1157 inclusive
Part of 3P300 Transmission Arrangement shown on Pages 50 and 50A
CASE & TRANSFER GEAR GP
2P-6900 CASE & TRANSFER GEAR GP
2P6900 TRANSFER CASE AND GEAR GROUP--Part 3 of 3
Serial No. 93U535 to 93U537 and 93U539 to 93U1157 inclusive
Part of 3P300 Transmission Arrangement shown on Pages 50 and 50A
CASE & TRANSFER GEAR GP
2P-6900 CASE & TRANSFER GEAR GP
2P6900 TRANSFER CASE AND GEAR GROUP--Part 1 of 3
Serial No. 93U1158-Up. Part of 3P300 Transmission Arrangement shown on Page 50A
2P6899 Transmission Case parts are shown on Page 54
CASE & TRANSFER GEAR GP
2P-6900 CASE & TRANSFER GEAR GP
2P6900 TRANSFER CASE AND GEAR GROUP--Part 2 of 3
Serial No. 93U1158-Up
Part of 3P300 Transmission Arrangement shown on Pages 50 and 50A
CASE & TRANSFER GEAR GP
2P-6900 CASE & TRANSFER GEAR GP
2P6900 TRANSFER CASE AND GEAR GROUP--Part 3 of 3
Serial No. 93U1158-Up
Part of 3P300 Transmission Arrangement shown on Page 50A
LINES GP-POWER TRAIN OIL
LINES GP-POWER TRAIN OIL
2P-9194 LINES GP-POWER TRAIN OIL
2P9194 TRANSMISSION LINES GROUP
Serial No. 93U1 to 904, 906 and 93U924 inclusive and Test No. 1 to 2170 inclusive
Part of 3P300 Transmission Arrangement shown on Pages 50 and 50A
LINES GP-POWER TRAIN OIL
2P-9194 LINES GP-POWER TRAIN OIL
2P9194 TRANSMISSION LINES GROUP
Serial No. 93U905, 93U907 to 93U923 and 93U925-Up. Test No. 2171-Up
Part of 3P300 Transmission Arrangement shown on Page 50A
PUMP GP
PUMP GP-GEAR
2P-6876 PUMP GP-GEAR
2P6876 GEAR PUMP GROUP
Part of 3P300 Transmission Arrangement shown on Pages 50 and 50A
2P3645 Pump parts are shown on Page 68A
PUMP GP-GEAR
2P-3645 PUMP GP-GEAR
2P3645 BASIC GEAR PUMP GROUP--Double Section
Part of 2P6876 Gear Pump Group shown on Page 68
TANDEM & COVER GP
COVER & TANDEM GP
8D-1730 COVER & TANDEM GP
COVERS AND TANDEM (8D1730 N/S)
TRANSMISSION GP
TRANSMISSION AR
3P-0300 TRANSMISSION AR
3P300 TRANSMISSION ARRANGEMENT
Serial No. 93U1 to 602, 606, 608 to 610, 616, 623, 630, 637 and 93U640 inclusive
Test No. 1 to 906 inclusive. 2P6900 Transfer Case and Gear, 2P5800 Planetary
Transmission, 2P5810 Hydraulic Control, 2P9194 Lines, 1P8523 Filter and 2P6876
Pump parts are shown on Pages 51 through 53, 55 through 57, 60, 67 and 67B
Note: 5P2561 Gasket Kit is available
TRANSMISSION AR
3P-0300 TRANSMISSION AR
3P300 TRANSMISSION ARRANGEMENT
Serial No. 93U603 to 605, 607, 611 to 615, 617 to 622, 624 to 629, 631 to 636,
638, 639 and 93U641-Up. Test No. 907-Up. 2P6900 Transfer Case and Gear,
2P5800 Planetary Transmission, 2P5810 Hydraulic Control, 2P9194 Lines, 6P2091
Filter and 2P6876 Pump parts are shown on Pages 52B through 53, 56B through 57,
60, 67, 67A and 68. Note: 5P2561 Gasket Kit is available
CASE AS-TMSN
2P-6899 CASE AS-TMSN
2P6899 TRANSMISSION CASE ASSEMBLY
Part of Transfer Case and Gear shown on Pages 51 and 52B
PLANETARY GP
2P-5800 PLANETARY GP
PLANETARY TRANSMISSION (2P5800 N/S)--Part 1 of 3
Serial No. 93U1 to 93U513 inclusive
Part of 3P300 Transmission Arrangement shown on Page 50
PLANETARY GP
2P-5800 PLANETARY GP
PLANETARY TRANSMISSION (2P5800 N/S)--Part 2 of 3
Serial No. 93U1 to 93U513 inclusive
Part of 3P300 Transmission Arrangement shown on Page 50
PLANETARY GP
2P-5800 PLANETARY GP
PLANETARY TRANSMISSION (2P5800 N/S)--Part 3 of 3
Serial No. 93U1 to 93U513 inclusive
Part of 3P300 Transmission Arrangement shown on Page 50
PLANETARY GP
2P-5800 PLANETARY GP
PLANETARY TRANSMISSION (2P5800 N/S)--Part 1 of 3
Serial No. 93U514-Up
Part of 3P300 Transmission Arrangement shown on Pages 50 and 50A
PLANETARY GP
2P-5800 PLANETARY GP
PLANETARY TRANSMISSION (2P5800 N/S)--Part 2 of 3
Serial No. 93U514-Up
Part of 3P300 Transmission Arrangement shown on Pages 50 and 50A
PLANETARY GP
2P-5800 PLANETARY GP
PLANETARY TRANSMISSION (2P5800 N/S)--Part 3 of 3
Serial No. 93U514-Up
Part of 3P300 Transmission Arrangement shown on Page 50
ADAPTER GP-TRANSMISSION
9D-9840 ADAPTER GP-TRANSMISSION
9D9840 TRANSMISSION ADAPTER GROUP
Serial No. 93U535-Up
TRANSMISSION MOUNTING HARDWARE GROUP
9D-2310 TRANSMISSION MOUNTING HARDWARE GROUP
9D2310 TRANSMISSION MOUNTING HARDWARE GROUP
Serial No. 93U1 to 93U534 inclusive
VALVE GP
VALVE GP
2P-5812 VALVE GP
2P5812 UNIT TEST VALVE GROUP
Serial No. 93U1 to 93U479 inclusive and Test No. 1 to 400 inclusive
Part of Transmission Hydraulic Control shown on Page 60
2P5813, 2P5814, 2P5815 and 2P5816 Valve parts are shown on Pages 63, 64, 64A and 66
Only separate parts serviced
VALVE GP
2P-5812 VALVE GP
2P5812 VALVE GROUP
Serial No. 93U480 to 93U1023 and 93U1025 inclusive and Test No. 401 to 2670 inclusive
Part of 2P5810 Transmission Hydraulic Control Group shown on Page 60
2P5813, 2P5814, 6P3226 and 2P5816 Valve parts are shown on Pages 63, 64, 64-1, 64B and 66
VALVE GP
2P-5812 VALVE GP
2P5812 VALVE GROUP
Serial No. 93U1024 and 93U1026-Up. Test No. 2671-Up. Part of 2P5810 Transmission Hydraulic Control Group shown
on Page 60. 2P5813, 2P5814, 8P1100 and 2P5816 Valve parts are shown on Pages 63, 64-1, 65 and 66
VALVE GP
2P-5811 VALVE GP
2P5811 RELIEF CONTROL VALVE GROUP
Serial No. 93U1 to 1014, 1016, 1021 and 93U1022 inclusive. Part of 2P5810
Transmission Hydraulic Control Group shown on Page 60. 2P4548 Valve parts
are shown on Page 63
VALVE AS
2P-4548 VALVE AS
2P4548 VALVE ASSEMBLY
Part of 2P5811 Relief Control Valve Group shown on Pages 62 and 62A
VALVE GP-PILOT
VALVE GP-PILOT
2P-5813 VALVE GP-PILOT
2P5813 PILOT VALVE GROUP
Part of 2P5812 Valve Group shown on Pages 60A, 60B and 61
VALVE GP-SELECTOR & PRESS CONT
VALVE GP
2P-5814 VALVE GP
2P5814 SELECTOR AND PRESSURE CONTROL VALVE GROUP
Serial No. 93U1 to 574, 580 and 93U582 inclusive
Part of 2P5812 Unit Test Valve Group shown on Page 61
VALVE GP
2P-5814 VALVE GP
2P5814 SELECTOR AND PRESSURE CONTROL VALVE GROUP
Serial No. 93U575 to 579, 581 and 93U583-Up and Test No. 890-Up
Part of 2P5812 Unit Test Valve Group shown on Page 61
SELECTOR AND PRESSURE CONTROL VALVE GROUP
2P-5815 SELECTOR AND PRESSURE CONTROL VALVE GROUP
2P5815 SELECTOR AND PRESSURE CONTROL VALVE GROUP
Serial No. 93U1 to 93U479 inclusive and Test No. 1 to 400 inclusive
Part of 2P5812 Unit Test Valve Group shown on Page 60A
SELECTOR AND PRESSURE CONTROL VALVE GROUP
6P-3226 SELECTOR AND PRESSURE CONTROL VALVE GROUP
6P3226 SELECTOR AND PRESSURE CONTROL VALVE GROUP
Serial No. 93U480 to 93U1023 and 93U1025 inclusive and Test No. 401 to 2670 inclusive
Part of 2P5812 Valve Group shown on Page 60B
VALVE GP-SELECTOR & PRESS CONT
8P-1100 VALVE GP-SELECTOR & PRESS CONT
8P1100 SELECTOR AND PRESSURE CONTROL VALVE GROUP
Serial No. 93U1024 and 93U1026-Up. Test No. 2671-Up
Part of 2P5812 Valve Group shown on Page 61
VALVE GP
2P-5816 VALVE GP
2P5816 SELECTOR AND PRESSURE CONTROL VALVE GROUP
Part of 2P5812 Unit Test Valve Group shown on Page 61
VALVE GP-TRANSMISSION CONTROL
CONTROL GP-TRANSMISSION HYD
2P-5810 CONTROL GP-TRANSMISSION HYD
2P5810 TRANSMISSION HYDRAULIC CONTROL GROUP
Part of 3P300 Transmission Arrangement shown on Page 50
2P5812 and 2P5811 Valve parts are shown on Pages 60A through 62A
WHEEL GP
WHEEL GP
8D-1700 WHEEL GP
8D1700 WHEEL GROUP--18.00 X 25 Tubeless Tires
WHEEL GP
9D-3575 WHEEL GP
9D3575 WHEEL GROUP--19.5 X 25--Type 1
FOR USE WITH 23.25 X 25 WIDE BASE TIRES
WHEEL GP
9D-3575 WHEEL GP
9D3575 WHEEL GROUP--19.5 X 25--Type 2
FOR USE WITH 23.5 X 25 WIDE BASE TIRES
WHEEL GP
9D-3575 WHEEL GP
9D3575 WHEEL GROUP--19.5 X 25--Type 3
FOR USE WITH 23.5 X 25 WIDE BASE TIRES
COOLER GP
LINES GP-POWER TRAIN COOLER
8D-7230 LINES GP-POWER TRAIN COOLER
8D7230 TRANSMISSION OIL COOLER LINES GROUP
DRIVE GP-FINAL
FINAL DRIVE GP
8D-2785 FINAL DRIVE GP
8D2785 FINAL DRIVE GROUP
Serial No. 93U1 to 93U582 inclusive
FINAL DRIVE GP
8D-2785 FINAL DRIVE GP
8D2785 FINAL DRIVE GROUP
Serial No. 93U583-Up
FINAL DRIVE SERVICE SEAL GROUP
6G-4440 FINAL DRIVE SERVICE SEAL GROUP
6G4440 FINAL DRIVE SERVICE SEAL GROUP--Field Installation
Improves sealing of the tandem oscillation bearings
FINAL DRIVE SERVICE SEAL GROUP
6G-4450 FINAL DRIVE SERVICE SEAL GROUP
6G4450 FINAL DRIVE SERVICE SEAL GROUP--Field Installation
Improves sealing of the tandem oscillation bearings

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Magazine
Improved Charging Valve For Accumulators And Suspension Cylinders{7107,7201}
1985/06/17
Retaining Ring Service Kit Available For Accumulators{5077,4263}
1998/11/16
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Reusability & Crack Inspection of Front & Rear Wheel Spindles on 14, 16, 18, & 24 Motor Graders Used in Mining Applications {4201, 4206, 4208, 4251, 4267, 4305, 4313, 5225}
Reusability & Crack Inspection of Front & Rear Wheel Spindles on 14, 16, 18, & 24 Motor Graders Used in Mining Applications {4201, 4206, 4208, 4251, 4267, 4305, 4313, 5225}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Procedure for the Repair of the Front Axle Assembly {3278}
2008/09/08
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
A New Reuse And Salvage Guideline Is Now Available for Front and Rear Wheel Spindles on Certain 16 and 24 Motor Graders {4201, 4206, 4208, 4251, 4267, 4305, 4313, 5225}
2012/11/28
Special Instruction
Caterpillar Motor Grader Series 14-16 Technician Checklist<BR>Transmission and Differential Removal and Installation{0372, 0374, 3258, 3258}
Caterpillar Motor Grader Series 14-16 Technician Checklist
Transmission and Differential Removal and Installation{0372, 0374, 3258, 3258}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Service Letter-NACD
7T9074 Parking Brake Solenoid Needs To Be Inspected On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
7T9074 Parking Brake Solenoid Needs To Be Inspected On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Control Valve For Parking Brake<BR> (5D4382)
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Clearance Adjustment Of Control Valve For Parking Brake
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Parking Brake
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Actuator For Parking Brake<BR> (8D7594)
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Control Valve For Parking Brake<BR> 5D4382
12G, 14G & 16G MOTOR GRADERS AIR SYSTEM & BRAKES
Clearance Adjustment Of Control Valve For Parking Brake
12G, 14G & 16G MOTOR GRADERS AIR SYSTEM & BRAKES
Actuator For Parking Brake<BR> 5T925 &amp; 8D7594
12G, 14G & 16G MOTOR GRADERS AIR SYSTEM & BRAKES
Parking Brake<BR> (12G)
12G, 14G & 16G MOTOR GRADERS AIR SYSTEM & BRAKES
Parking Brake<BR> (14G &amp; 16G)
12G, 14G & 16G MOTOR GRADERS AIR SYSTEM & BRAKES
Service Letter-China
7T9074 Parking Brake Solenoid Needs To Be Inspected On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
7T9074 Parking Brake Solenoid Needs To Be Inspected On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Parking Brake Control Valve
16G MOTOR GRADER VEHICLE SYSTEMS
Parking Brake Release Valve
16G MOTOR GRADER VEHICLE SYSTEMS
Parking Brake Rotochamber
16G POWER TRAIN
Parking Brake Control Valve
12G, 14G, 16G, 120G, 130G & 140G MOTOR GRADERS OPERATOR'S ST
Parking Brake Rotochamber
14G & 16G MOTOR GRADERS POWER TRAIN
Parking Brake Rotochamber (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Parking Brake Control Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Parking Brake Release Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Parking Brake Rotochamber And Release Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Service Magazine
Check Valve Prevents Release Of The Parking Brake{5220,4267}
1982/04/26
New Parking Brake Test Procedure {4267}
1993/10/18
Hose Has Been Added To The Brake Control Group To Increase The Service Life Of The 6G-8425 Control Valve Group{4257,4267}
1995/09/25
Reuse And Salvage Guidelines
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications
Drive Chains
14G & 16G MOTOR GRADERS POWER TRAIN
Drive Chains
14G & 16G MOTOR GRADERS POWER TRAIN
Disassembly and Assembly
Drive Chains
16G POWER TRAIN
Drive Chains
14G & 16G MOTOR GRADERS POWER TRAIN
Drive Chains (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
Recommendations For Replacement Of Tandem Drive Chains{4063}
1980/11/03
Fabricated Guard Gives Protection To Brake Tube On Motor Graders Equipped With Tire Chains{4257,4062}
1979/05/21
New Chain Groups Used In Tandem Drives; Special Cotter Pins Available For Connecting Links{4063}
1979/12/17
Checking Chain Wear In Motor Grader Tandem Drives {4063}
1990/06/11
Checking Chain Wear in Motor Grader Tandem Drives {3261, 4063}
2002/07/15
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Service Magazine
Parts Service For Replacement Pedal And Tread {3059}
1998/04/06
Special Instruction
Installation Of Differential Lock Control Groups{3273}
Installation Of Differential Lock Control Groups{3273}
Specifications
Control Valve For Differential Lock<BR> (8D6813)
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Disassembly and Assembly
Differential Lock Actuator Valve
16G MOTOR GRADER VEHICLE SYSTEMS
Differential Lock Actuator Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Service Magazine
Seal Kit Available For Differential Lock Solenoid{3272}
1983/06/20
New Differential Lock Control Is Activated Electrically And Can Be Locked In All Speed Ranges{3258,3264,3272,3273,3266}
1977/10/31
New Differential Lock Solenoid Valve Group Used With Improved Coil{3273}
1991/11/18
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Technical Information Bulletin
Machine Creeps WIth Manual Modulation Pedal Depressed
Machine Creeps WIth Manual Modulation Pedal Depressed
Specifications
Transmission Control Valve Group
14G & 16G MOTOR GRADERS POWER TRAIN
Bench Test Procedures
Bench Test Procedure For A 120G, 130G, 140G, 160G, 12G, 14G, and 16G Motor Grader Transmission{3030, 3073}
Bench Test Procedure For A 120G, 130G, 140G, 160G, 12G, 14G, and 16G Motor Grader Transmission{3030, 3073}
Disassembly and Assembly
Transmission Hydraulic Control Valve
16G POWER TRAIN
Transfer Gears
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
Improvements To Selector And Pressure Control Valve Group Give Operator Better Control When Manual Modulation Pedal Is Depressed (Pushed In){3167,3162,3157,3152}
1980/12/15
Spring Changed In Manual Modulation Valve Of Transmission Pressure Control Valve{3152,3167}
1977/11/21
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
New Pin For Moldboard Shift Cylinder Prevents Loss During Operation{5229}
1984/06/04
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Special Instruction
Installation Of Differential Lock Control Groups{3273}
Installation Of Differential Lock Control Groups{3273}
Caterpillar Motor Grader Series 14-16 Technician Checklist<BR>Transmission and Differential Removal and Installation{0372, 0374, 3258, 3258}
Caterpillar Motor Grader Series 14-16 Technician Checklist
Transmission and Differential Removal and Installation{0372, 0374, 3258, 3258}
Service Letter-NACD
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Technical Information Bulletin
Updated Differential Bushing is Available for Certain Motor Graders{3258}
Updated Differential Bushing is Available for Certain Motor Graders{3258}
Specifications
2P5815, 6P3226 and 8P1100 Valve Group For Differential, Selector And Pressure Control
14G & 16G MOTOR GRADERS POWER TRAIN
Valve Group For Differential Lock<BR> (2P7014)
14G & 16G MOTOR GRADERS POWER TRAIN
2G8990 Differential Lock Solenoid Valve<BR> (For Later Machines With a Differential)
14G & 16G MOTOR GRADERS POWER TRAIN
16G Differential And Bevel Gear<BR> (8D4290)
14G & 16G MOTOR GRADERS POWER TRAIN
14G Differential And Bevel Gear<BR> (8D5415)
14G & 16G MOTOR GRADERS POWER TRAIN
Adjustment Procedure For Backlash Of Ring Gear And Preload Of Differential Support Bearings Through The Side Bores In The Differential Case:
14G & 16G MOTOR GRADERS POWER TRAIN
Control Valve For Differential Lock<BR> (8D6813)
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Differential Lock Valve<BR> (2P7014)
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Differential Lock Solenoid Valve<BR> (2G8990) (For Later Machines With a Differential)
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Differential, Selector And Pressure Control Valve
14G & 16G MOTOR GRADERS POWER TRAIN
Differential And Bevel Gear
14G & 16G MOTOR GRADERS POWER TRAIN
Differential Lock Solenoid Valve
14G & 16G MOTOR GRADERS POWER TRAIN
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Service Letter-China
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Service Letter-Asia
Reuse And Salvage Guidelines
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Differential Housing Components for Wheel Loaders, Articulated Trucks, Wheel Tractors, Compactors, Integrated Toolcarriers, and Motor Graders {3258, 3284}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Disassembly and Assembly
Differential Lock Actuator Valve
16G MOTOR GRADER VEHICLE SYSTEMS
Differential
16G POWER TRAIN
Differential
14G & 16G MOTOR GRADERS POWER TRAIN
Differential (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Differential (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Differential Lock Actuator Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Service Magazine
Different Nuts Now Used To Adjust Preload On Bearings For Differential And Bevel Gears{3258,3256,3257}
1980/02/04
Procedure To Adjust Support Bearing Preload And Gear Backlash (Tooth Clearance) For Bevel Gear And Pinion{3258,3256,3257}
1980/04/14
Improvements To Differential, Differential Carrier, And Differential Lock{3258,3264,3280}
1982/02/15
Seal Kit Available For Differential Lock Solenoid{3272}
1983/06/20
Oil Level In Differential Compartment Lowered To Prevent Oil Transfer From Differential To Tandem Housing{3179,3177,3258,4071}
1977/08/08
New Differential Lock Control Is Activated Electrically And Can Be Locked In All Speed Ranges{3258,3264,3272,3273,3266}
1977/10/31
New Differential Lock Solenoid Valve Group Used With Improved Coil{3273}
1991/11/18
Check Hole And Tap Depth Of Differential Carrier During Rebuild {3283,3284}
1993/03/01
Correct Use Of The Motor Grader Differential Lock Feature Extends Service Life Of Power Train{3258,5250}
1993/11/29
The Differential Bevel Pinion Parts Are Now Available for Service on Certain Motor Graders {3258}
2011/07/18
Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Caterpillar Motor Grader Series 14-16 Technician Checklist<BR>Transmission and Differential Removal and Installation{0372, 0374, 3258, 3258}
Caterpillar Motor Grader Series 14-16 Technician Checklist
Transmission and Differential Removal and Installation{0372, 0374, 3258, 3258}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Checking Chain Wear in Motor Grader Tandem Drives {3261, 4063}
2001/11/05
Special Instruction
Installation Of Motor Grader Tandem Oscillation Seal Groups{4052}
Installation Of Motor Grader Tandem Oscillation Seal Groups{4052}
Specifications
Tandem Groups
14G & 16G MOTOR GRADERS POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Information Release Memo
CAT REMAN EXPANDS HYD GEAR &amp; PISTON PUMP &amp; MOTOR OPTIONS
CAT REMAN EXPANDS HYD GEAR & PISTON PUMP & MOTOR OPTIONS
Disassembly and Assembly
Tandem Housings
16G POWER TRAIN
Drive Sprockets
16G POWER TRAIN
Tandem Housings
14G & 16G MOTOR GRADERS POWER TRAIN
Drive Sprockets
14G & 16G MOTOR GRADERS POWER TRAIN
Tandem Housings
14G & 16G MOTOR GRADERS POWER TRAIN
Drive Sprockets (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
Recommendations For Replacement Of Tandem Drive Chains{4063}
1980/11/03
Specifications For Reconditioning Of Final Drive Inner And Outer Housings{4052,4059,4062}
1981/07/06
New Final Drive Groups And Replacement Seal Groups Have Tandem Oscillation Seals With Double Lips{4052,4064}
1985/02/11
Oil Level In Differential Compartment Lowered To Prevent Oil Transfer From Differential To Tandem Housing{3179,3177,3258,4071}
1977/08/08
The Original O-Ring Seals Used Between The Inner And Outer Housing Of The Tandem Drive Are Used Again{4064}
1978/05/01
Stronger Tandem Drive Housings Now Used{4064}
1979/03/12
Fabricated Guard Gives Protection To Brake Tube On Motor Graders Equipped With Tire Chains{4257,4062}
1979/05/21
New Chain Groups Used In Tandem Drives; Special Cotter Pins Available For Connecting Links{4063}
1979/12/17
New Cover And Tandem Groups Used{4062,4064,4071}
1989/09/25
Checking Chain Wear In Motor Grader Tandem Drives {4063}
1990/06/11
New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Specifications
Oil Filter<BR> (1P8253)
14G & 16G MOTOR GRADERS POWER TRAIN
Oil Filter<BR> (6P2091)
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Oil Filter
14G & 16G MOTOR GRADERS POWER TRAIN
Primary Fuel Filter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Fuel Filter Base
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Oil Filter
3406C ENGINE FOR CATERPILLAR BUILT MACHINES
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Transmission Oil Filter Base
16G POWER TRAIN
Transmission Oil Filter Base (Earlier)
16G POWER TRAIN
Transmission Oil Filter Housing And Base
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Oil Filter Base (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
Oil Level In Differential Compartment Lowered To Prevent Oil Transfer From Differential To Tandem Housing{3179,3177,3258,4071}
1977/08/08
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Technical Information Bulletin
Locknut Coming Loose On Directional Clutch Hubs
Locknut Coming Loose On Directional Clutch Hubs
Transfer Idler Gear Bearing Failures
Transfer Idler Gear Bearing Failures
Specifications
Transfer Gears
14G & 16G MOTOR GRADERS POWER TRAIN
Transfer Gear Groups
14G & 16G MOTOR GRADERS POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Disassembly and Assembly
Transfer Gears
16G POWER TRAIN
Transfer Gears
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
Wrong Installation Of Washers Between Bearing Cone And Bearing Retainer Nut Can Cause Directional Clutch Damage{3155,3159,3176}
1980/11/10
Several Changes Have Been Made To Transfer Gear Group To Improve Service Life Of The Power Shift Transmission{3155,3159}
1978/02/20
Improvements Made To Planetary Groups And Transfer Gear Groups{3176}
1988/03/28
New Stake Locknut And Washer Used To Prevent Loosening Of Support Assembly In Transfer Case And Gear Group{3159,3176}
1990/03/05
Sealed Needle Bearing Used On Parking Brake Control Shaft{4284,4250}
1992/11/30
New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12
Supplement To Correct Seal Ring Positioning {3159,7555}
1999/02/15
A New Locknut is Used on the Clutch Shafts {3030, 3063, 3132, 3159}
2001/04/23
The Bearing Assembly for the Transfer Gear Assembly Has Changed {3159}
2001/06/18
A New Locknut Improves Serviceability {3159}
2002/12/23
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Installation Of Differential Lock Control Groups{3273}
Installation Of Differential Lock Control Groups{3273}
Installation Of Motor Grader Tandem Oscillation Seal Groups{4052}
Installation Of Motor Grader Tandem Oscillation Seal Groups{4052}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Transmission Oil Pump
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Oil Filter
14G & 16G MOTOR GRADERS POWER TRAIN
Differential And Bevel Gear
14G & 16G MOTOR GRADERS POWER TRAIN
Differential Lock Solenoid Valve
14G & 16G MOTOR GRADERS POWER TRAIN
Tandem Groups
14G & 16G MOTOR GRADERS POWER TRAIN
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Rear Wheels (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
New Bonnet Used On Transmission Oil Cooler; Bracket Holds Bonnet To Oil Pan{1375,1302}
1980/02/04
Different Nuts Now Used To Adjust Preload On Bearings For Differential And Bevel Gears{3258,3256,3257}
1980/02/04
Procedure To Adjust Support Bearing Preload And Gear Backlash (Tooth Clearance) For Bevel Gear And Pinion{3258,3256,3257}
1980/04/14
Improvements To Differential, Differential Carrier, And Differential Lock{3258,3264,3280}
1982/02/15
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Seal Kit Available For Differential Lock Solenoid{3272}
1983/06/20
Identification Grooves Used On Slippers For Pistons In Hydraulic Pumps And Motors{5070,5058}
1984/11/26
New Final Drive Groups And Replacement Seal Groups Have Tandem Oscillation Seals With Double Lips{4052,4064}
1985/02/11
Improved Charging Valve For Accumulators And Suspension Cylinders{7107,7201}
1985/06/17
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Oil Level In Differential Compartment Lowered To Prevent Oil Transfer From Differential To Tandem Housing{3179,3177,3258,4071}
1977/08/08
New Differential Lock Control Is Activated Electrically And Can Be Locked In All Speed Ranges{3258,3264,3272,3273,3266}
1977/10/31
Service Supports Available For Rear Of Engine{0701,0720,1000,3150}
1987/07/27
New 1U6539 And 1U6540 Hand Taps And 6V7052 Rethreading Die Available{0671,4202,4210}
1988/02/29
Seal And Valve Repair Kit Available for 2G3537 Relay Valve{4280}
1988/10/10
Fabricated Guard Gives Protection To Brake Tube On Motor Graders Equipped With Tire Chains{4257,4062}
1979/05/21
Spring Removed From Relay Valve On Scraper Brake Control Group{4280}
1979/06/18
New Chain Groups Used In Tandem Drives; Special Cotter Pins Available For Connecting Links{4063}
1979/12/17
Changes Made To Final Drive Group To Give Less End-Play In The Oscillation Joint{4050}
1979/12/24
New Cover And Tandem Groups Used{4062,4064,4071}
1989/09/25
Correct Handling And Replacement of 3T6962 Pressure Switch Assembly{7332}
1990/12/10
New Differential Lock Solenoid Valve Group Used With Improved Coil{3273}
1991/11/18
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Service Magazine
Identification Grooves Used On Slippers For Pistons In Hydraulic Pumps And Motors{5070,5058}
1984/11/26
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
An Explanation of Motor Grader Bounce{3000, 4000, 4200, 4203}
An Explanation of Motor Grader Bounce{3000, 4000, 4200, 4203}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Correct Use Of The Motor Grader Differential Lock Feature Extends Service Life Of Power Train{3258,5250}
1993/11/29
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Oil Pump For The Transmission<BR> (2P3645)
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Oil Pump
14G & 16G MOTOR GRADERS POWER TRAIN
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Information Release Memo
CAT REMAN EXPANDS HYD GEAR &amp; PISTON PUMP &amp; MOTOR OPTIONS
CAT REMAN EXPANDS HYD GEAR & PISTON PUMP & MOTOR OPTIONS
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Transmission Oil And Scavenge Pump
16G POWER TRAIN
Transmission Oil And Scavenge Pump
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Oil And Scavenge Pump (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
New Grooved Piston Assemblies Available For Piston Pump Rotating Groups {5070}
1996/08/12
Service Replacements For Discontinued Piston Pump Groups{5070}
1996/11/11
Disassembly and Assembly
Transmission Oil Filter Base
16G POWER TRAIN
Transmission Oil Filter Base (Earlier)
16G POWER TRAIN
Transmission Oil Filter Housing And Base
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Oil Filter Base (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Installation Of Transmission Guard Groups{7153}
Installation Of Transmission Guard Groups{7153}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Service Magazine
New Bottom Guard Groups Available{7153}
1978/08/21
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Specifications
Tandem Groups
14G & 16G MOTOR GRADERS POWER TRAIN
Disassembly and Assembly
Tandem Housings
16G POWER TRAIN
Tandem Housings
14G & 16G MOTOR GRADERS POWER TRAIN
Tandem Housings
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
Specifications For Reconditioning Of Final Drive Inner And Outer Housings{4052,4059,4062}
1981/07/06
Oil Level In Differential Compartment Lowered To Prevent Oil Transfer From Differential To Tandem Housing{3179,3177,3258,4071}
1977/08/08
Fabricated Guard Gives Protection To Brake Tube On Motor Graders Equipped With Tire Chains{4257,4062}
1979/05/21
New Cover And Tandem Groups Used{4062,4064,4071}
1989/09/25
Addition of the Service Interval for the Tandem Breather {4064}
2001/08/27
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/27
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Special Instruction
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Caterpillar Motor Grader Series 14-16 Technician Checklist<BR>Transmission and Differential Removal and Installation{0372, 0374, 3258, 3258}
Caterpillar Motor Grader Series 14-16 Technician Checklist
Transmission and Differential Removal and Installation{0372, 0374, 3258, 3258}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Service Supports Available For Rear Of Engine{0701,0720,1000,3150}
1987/07/27
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Service Magazine
Improved Corrosion Inhibiting Procedure Used For Remanufactured Transmissions And Torque Converters {3001}
1997/03/03
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2013/03/21
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2013/03/21
Special Instruction
Installation Of Transmission Guard Groups{7153}
Installation Of Transmission Guard Groups{7153}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Technical Information Bulletin
Locknut Coming Loose On Directional Clutch Hubs
Locknut Coming Loose On Directional Clutch Hubs
Tooth Wear On 6Y5914 (Rotating) Clutch Disc
Tooth Wear On 6Y5914 (Rotating) Clutch Disc
Some 2P-4472, 7G-0825, and 8P-1656 Clutch Plates May Have Been Shipped Into the Parts System Before Finish Grinding
Some 2P-4472, 7G-0825, and 8P-1656 Clutch Plates May Have Been Shipped Into the Parts System Before Finish Grinding
Specifications
Engine And Transmission Support (980C Wheel Loader)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Transmission<BR> (2P5800)
14G & 16G MOTOR GRADERS POWER TRAIN
Oil Pump For The Transmission<BR> (2P3645)
14G & 16G MOTOR GRADERS POWER TRAIN
Relief Valve Group<BR> (2P5811)
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Control Group<BR> (2P5812)
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Control
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Oil Pump
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Oil Filter
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Control Valve Group
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Control Group
14G & 16G MOTOR GRADERS POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Identification and Applications of Transmission Clutch Plates and Specifications to Machine Reaction Faces for Power Shift Transmissions {3054, 3155, 3160, 3190}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Bench Test Procedures
Bench Test Procedure For A 120G, 130G, 140G, 160G, 12G, 14G, and 16G Motor Grader Transmission{3030, 3073}
Bench Test Procedure For A 120G, 130G, 140G, 160G, 12G, 14G, and 16G Motor Grader Transmission{3030, 3073}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission Oil Filter Base
16G POWER TRAIN
Transmission Oil Filter Base (Earlier)
16G POWER TRAIN
Transmission Oil And Scavenge Pump
16G POWER TRAIN
Transmission
16G POWER TRAIN
Transmission Hydraulic Control Valve
16G POWER TRAIN
Transmission Oil Cooler
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Transmission Control
12G, 14G, 16G, 120G, 130G & 140G MOTOR GRADERS OPERATOR'S ST
Transmission Oil Filter Housing And Base
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Oil And Scavenge Pump
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Oil Filter Base (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Transmission Oil And Scavenge Pump (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
Clearance Increased Between Sleeve Bearing And Transmission Center Shaft {3176}
1980/01/07
New Bonnet Used On Transmission Oil Cooler; Bracket Holds Bonnet To Oil Pan{1375,1302}
1980/02/04
Larger Diameter Retainer Ring Used To Hold Rear Bearing In Transmission{3176,3150}
1980/10/20
Wrong Installation Of Washers Between Bearing Cone And Bearing Retainer Nut Can Cause Directional Clutch Damage{3155,3159,3176}
1980/11/10
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
New Rod Ends With Steel Bearings Are Now Used For The Transmission Control Linkage{3156}
1983/05/30
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Spring Changed In Manual Modulation Valve Of Transmission Pressure Control Valve{3152,3167}
1977/11/21
Several Changes Have Been Made To Transfer Gear Group To Improve Service Life Of The Power Shift Transmission{3155,3159}
1978/02/20
Improvements Made To Planetary Groups And Transfer Gear Groups{3176}
1988/03/28
Improved Corrosion Inhibiting Procedure Used For Remanufactured Transmissions And Torque Converters {3001}
1997/03/03
Recommendations To Extend Transmission Clutch Service Life After Rebuild {3065}
1999/10/18
A New Locknut is Used on the Clutch Shafts {3030, 3063, 3132, 3159}
2001/04/23
An Updated Planetary Group Improves Service Life {3160}
2002/08/26
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Specifications
Relief Valve Group<BR> (2P5811)
14G & 16G MOTOR GRADERS POWER TRAIN
2P5814 Valve Group For Direction Selector And Pressure Control
14G & 16G MOTOR GRADERS POWER TRAIN
2P5815, 6P3226 and 8P1100 Valve Group For Differential, Selector And Pressure Control
14G & 16G MOTOR GRADERS POWER TRAIN
2P5816 Valve Group For Modulating, Selector And Pressure Control
14G & 16G MOTOR GRADERS POWER TRAIN
Direction Selector And Pressure Control Valve
14G & 16G MOTOR GRADERS POWER TRAIN
Differential, Selector And Pressure Control Valve
14G & 16G MOTOR GRADERS POWER TRAIN
Modulating Selector And Pressure Control Valve Group
14G & 16G MOTOR GRADERS POWER TRAIN
Disassembly and Assembly
Transmission Hydraulic Control Valve
16G POWER TRAIN
Transfer Gears
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
Improvements To Selector And Pressure Control Valve Group Give Operator Better Control When Manual Modulation Pedal Is Depressed (Pushed In){3167,3162,3157,3152}
1980/12/15
Spring Changed In Manual Modulation Valve Of Transmission Pressure Control Valve{3152,3167}
1977/11/21
Specifications
Relief Valve Group
14G & 16G MOTOR GRADERS POWER TRAIN
Disassembly and Assembly
Relief Control Valve
16G POWER TRAIN
Relief Control Valve
14G & 16G MOTOR GRADERS POWER TRAIN
Relief Control Valve (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Special Instruction
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Seal And Valve Repair Kit Available for 2G3537 Relay Valve{4280}
1988/10/10
Spring Removed From Relay Valve On Scraper Brake Control Group{4280}
1979/06/18
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Disassembly and Assembly
Relief Control Valve
16G POWER TRAIN
Relief Control Valve
14G & 16G MOTOR GRADERS POWER TRAIN
Relief Control Valve (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Specifications
2P5814 Valve Group For Direction Selector And Pressure Control
14G & 16G MOTOR GRADERS POWER TRAIN
2P5815, 6P3226 and 8P1100 Valve Group For Differential, Selector And Pressure Control
14G & 16G MOTOR GRADERS POWER TRAIN
2P5816 Valve Group For Modulating, Selector And Pressure Control
14G & 16G MOTOR GRADERS POWER TRAIN
Direction Selector And Pressure Control Valve
14G & 16G MOTOR GRADERS POWER TRAIN
Differential, Selector And Pressure Control Valve
14G & 16G MOTOR GRADERS POWER TRAIN
Modulating Selector And Pressure Control Valve Group
14G & 16G MOTOR GRADERS POWER TRAIN
Reuse And Salvage Guidelines
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Specifications For Hydraulic Piston Pump And Motor Components {3083, 3203, 3221, 3222, 4351, 5058, 5069, 5070, 5117}
Disassembly and Assembly
Transmission Hydraulic Control Valve
16G POWER TRAIN
Transfer Gears
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
Improvements To Selector And Pressure Control Valve Group Give Operator Better Control When Manual Modulation Pedal Is Depressed (Pushed In){3167,3162,3157,3152}
1980/12/15
Spring Changed In Manual Modulation Valve Of Transmission Pressure Control Valve{3152,3167}
1977/11/21
Specifications
2P5815, 6P3226 and 8P1100 Valve Group For Differential, Selector And Pressure Control
14G & 16G MOTOR GRADERS POWER TRAIN
Valve Group For Differential Lock<BR> (2P7014)
14G & 16G MOTOR GRADERS POWER TRAIN
2G8990 Differential Lock Solenoid Valve<BR> (For Later Machines With a Differential)
14G & 16G MOTOR GRADERS POWER TRAIN
Control Valve For Differential Lock<BR> (8D6813)
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Differential Lock Valve<BR> (2P7014)
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Differential Lock Solenoid Valve<BR> (2G8990) (For Later Machines With a Differential)
16G MOTOR GRADER AIR SYSTEM AND BRAKES
Differential, Selector And Pressure Control Valve
14G & 16G MOTOR GRADERS POWER TRAIN
Differential Lock Solenoid Valve
14G & 16G MOTOR GRADERS POWER TRAIN
Disassembly and Assembly
Differential Lock Actuator Valve
16G MOTOR GRADER VEHICLE SYSTEMS
Differential Lock Actuator Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Service Magazine
Seal Kit Available For Differential Lock Solenoid{3272}
1983/06/20
Seal And Valve Repair Kit Available for 2G3537 Relay Valve{4280}
1988/10/10
Spring Removed From Relay Valve On Scraper Brake Control Group{4280}
1979/06/18
New Differential Lock Solenoid Valve Group Used With Improved Coil{3273}
1991/11/18
Technical Information Bulletin
Machine Creeps WIth Manual Modulation Pedal Depressed
Machine Creeps WIth Manual Modulation Pedal Depressed
Specifications
Transmission Control Valve Group
14G & 16G MOTOR GRADERS POWER TRAIN
Bench Test Procedures
Bench Test Procedure For A 120G, 130G, 140G, 160G, 12G, 14G, and 16G Motor Grader Transmission{3030, 3073}
Bench Test Procedure For A 120G, 130G, 140G, 160G, 12G, 14G, and 16G Motor Grader Transmission{3030, 3073}
Disassembly and Assembly
Transmission Hydraulic Control Valve
16G POWER TRAIN
Transfer Gears
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
Improvements To Selector And Pressure Control Valve Group Give Operator Better Control When Manual Modulation Pedal Is Depressed (Pushed In){3167,3162,3157,3152}
1980/12/15
Spring Changed In Manual Modulation Valve Of Transmission Pressure Control Valve{3152,3167}
1977/11/21
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
An Explanation of Motor Grader Bounce{3000, 4000, 4200, 4203}
An Explanation of Motor Grader Bounce{3000, 4000, 4200, 4203}
Reuse Guidelines for Wheels that are used on certain Motor Graders{4201}
Reuse Guidelines for Wheels that are used on certain Motor Graders{4201}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Specifications
Wheel Groups
14G & 16G MOTOR GRADERS POWER TRAIN
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Reusability & Crack Inspection of Front & Rear Wheel Spindles on 14, 16, 18, & 24 Motor Graders Used in Mining Applications {4201, 4206, 4208, 4251, 4267, 4305, 4313, 5225}
Reusability & Crack Inspection of Front & Rear Wheel Spindles on 14, 16, 18, & 24 Motor Graders Used in Mining Applications {4201, 4206, 4208, 4251, 4267, 4305, 4313, 5225}
Disassembly and Assembly
Front Wheels
16G MOTOR GRADER VEHICLE SYSTEMS
Rear Wheels
16G POWER TRAIN
Rear Wheels
14G & 16G MOTOR GRADERS POWER TRAIN
Rear Wheels (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Adjustment For The Lengths Of The Rods In The Steering Cylinders When The Toe-In For The Front Wheels Is Correct:
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Front Wheels
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Service Magazine
Oil Changes Not Necessary For Front Wheel Spindle Bearing Housings{4313,4300}
1984/12/10
New 1U6539 And 1U6540 Hand Taps And 6V7052 Rethreading Die Available{0671,4202,4210}
1988/02/29
Service Front Wheel Spindle Bearing Housings Every 500 Service Hours Or Three Months{4234,7525}
1990/03/05
Basics Of Front Wheel Alignment{4305,4313,4314,4318,4203,5225}
1990/06/25
Adjusting Front Wheel Bearings If The Spindles Are Too Long {4205,4201}
1994/01/24
Recommended Tire And Rim Usage {4201,4202,4203}
1997/12/22
Recommended Limits to the Difference in Tire Diameters {4203}
2003/07/28
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
A New Reuse And Salvage Guideline Is Now Available for Front and Rear Wheel Spindles on Certain 16 and 24 Motor Graders {4201, 4206, 4208, 4251, 4267, 4305, 4313, 5225}
2012/11/28
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Specifications
Oil Cooler (621B and 623B - Torque Converter Oil, 980C - Hydraulic Oil)
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Disassembly and Assembly
Transmission Oil Cooler
3406 VEHICULAR ENGINE FOR 16G MOTOR GRADER
Service Magazine
New Bonnet Used On Transmission Oil Cooler; Bracket Holds Bonnet To Oil Pan{1375,1302}
1980/02/04
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Installation Of Motor Grader Tandem Oscillation Seal Groups{4052}
Installation Of Motor Grader Tandem Oscillation Seal Groups{4052}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Letter-NACD
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Service Letter-Australia
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Service Letter-CFEL
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Service Letter-CSARL
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Service Letter-Americas
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Service Letter-Brazil
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Specifications
Final Drive<BR> 8D2860 (14G)
14G & 16G MOTOR GRADERS POWER TRAIN
Final Drive<BR> 8D2785 (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Wheels
14G & 16G MOTOR GRADERS POWER TRAIN
Final Drive Groups
14G & 16G MOTOR GRADERS POWER TRAIN
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Service Letter-China
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Service Letter-Asia
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Procedures to Salvage Thrust Faces on Planetary Carriers {3160, 4050, 4051, 4093}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Installing New Final Drive Thrust Washers On Certain 12G, 14G, 16G, 120G, 130G, 140G, And 160G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Product Support Program For Tightening The Mounting Nuts That Hold The Final Drive To The Differential Case On Certain 12G, 14G, 16G, 120G, And 140G Motor Graders
Disassembly and Assembly
Axles
16G POWER TRAIN
Drive Sprockets
16G POWER TRAIN
Final Drives
16G POWER TRAIN
Axles
14G & 16G MOTOR GRADERS POWER TRAIN
Drive Sprockets
14G & 16G MOTOR GRADERS POWER TRAIN
Final Drives
14G & 16G MOTOR GRADERS POWER TRAIN
Axles (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Drive Sprockets (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Final Drives (16G)
14G & 16G MOTOR GRADERS POWER TRAIN
Service Magazine
Specifications For Reconditioning Of Final Drive Inner And Outer Housings{4052,4059,4062}
1981/07/06
Make Sure Sprocket Retainer Bolts Can Be Installed By Hand{4251}
1983/11/21
New Final Drive Groups And Replacement Seal Groups Have Tandem Oscillation Seals With Double Lips{4052,4064}
1985/02/11
Changes Made To Final Drive Group To Give Less End-Play In The Oscillation Joint{4050}
1979/12/24
New Final Drive Thrust Washers {4093,4056}
1991/07/22
New Retainers, New Wear Rings, and a New Setting for End Play Improve the Service Life of the Final Drive {4050}
2005/05/09
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
New Thrust Washers Update the Final Drive Groups on Certain Motor Graders {4050}
2010/11/11
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Truck sale:

Caterpillar 16G
 
Caterpillar 16G
- motor graders
FINNING CANADA
Caterpillar 16G, motor graders, Construction
 
Caterpillar 16G, motor graders, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Caterpillar 16G
 
Caterpillar 16G
- motor graders
EMPIRE MACHINERY
 
89,900 
Caterpillar 16G, motor graders, Construction

EMPIRE MACHINERY
Caterpillar 16G, motor graders, Construction
31,500 
Caterpillar 16G, motor graders, Construction

ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.