AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

16G MOTOR GRADER 93U00001-01178 (MACHINE) WORK TOOLS Caterpillar SIS



MOTOR GRADER 16G MOTOR GRADER 93U
 16G MOTOR GRADER 93U00001-01178 (MACHINE) UEG0737S 16G 93U   (1973)

Parts group 16G:

  For full view, you need register
WORK TOOLS
BLADE GP
LIFT GP-BLADE
8D-4885 LIFT GP-BLADE
8D4885 BLADE LIFT GROUP--Part 1 of 2
Serial No. 93U1 to 93U730 inclusive
LIFT GP-BLADE
8D-4885 LIFT GP-BLADE
8D4885 BLADE LIFT GROUP--Part 2 of 2
Serial No. 93U1 to 93U730 inclusive
LIFT GP-BLADE
8D-4885 LIFT GP-BLADE
8D4885 BLADE LIFT GROUP--Part 1 of 2
Serial No. 93U731-Up
LIFT GP-BLADE
8D-4885 LIFT GP-BLADE
8D4885 BLADE LIFT GROUP--Part 2 of 2
Serial No. 93U731-Up
STABILIZER GP
9D-2380 STABILIZER GP
9D2380 STABILIZER GROUP
Part of 8D9760 Blade Control Arrangement listed on Page 170A
Only separate parts serviced
BLADE GP
9D-1440 BLADE GP
BLADE (9D1440 N/S)--16 Foot
BLADE GROUP
9D-1450 BLADE GROUP
9D1450 BLADE GROUP--14 Foot
AN ATTACHMENT
BLADE GP
9D-0385 BLADE GP
9D385 BLADE GROUP--14 Foot--Type 1
Part of 8D9755 Blade Control Arrangement listed on Page 170-1
BLADE GP
9D-0385 BLADE GP
9D385 BLADE GROUP--14 Foot--Type 2
Part of 8D9755 Blade Control Arrangement listed on Page 170-1
BLADE GP
9D-0375 BLADE GP
9D375 MOTOR GRADER BLADE GROUP--16 Foot--Type 1
Part of 8D9760 Blade Control Arrangement listed on Page 170A
BLADE GP
9D-0375 BLADE GP
9D375 MOTOR GRADER BLADE GROUP--16 Foot--Type 2
Part of 8D9760 Blade Control Arrangement listed on Page 170A
BLADE EXTENSION GROUP--R H
2G-6055 BLADE EXTENSION GROUP--R H
2G6055 BLADE EXTENSION GROUP--R.H.--2 Foot
AN ATTACHMENT
BLADE EXTENSION GROUP--L H
2G-6065 BLADE EXTENSION GROUP--L H
2G6065 BLADE EXTENSION GROUP--L.H.--2 Foot
AN ATTACHMENT
GROUND ENGAGING TOOLS (G.E.T.)
CUTTING EDGE REPLACEMENT
CUTTING EDGE REPLACEMENT--Field Installation
FOR USE WITH 4.27 m (14 Ft.) BLADE GROUP
CUTTING EDGE REPLACEMENT
CUTTING EDGE REPLACEMENT--Field Installation
FOR USE WITH 4.88 m (16 Ft.) BLADE GROUP
9D-2195 CUTTING EDGE REPLACEMENT GROUP
9D2195 CUTTING EDGE REPLACEMENT GROUP--CURVED 14 FOOT--.62" THICK
X 8.00" WIDE
AN ATTACHMENT
9D-2194 CUTTING EDGE REPLACEMENT GROUP
9D2194 CUTTING EDGE REPLACEMENT GROUP--CURVED 16 FOOT--.62" THICK
X 8.00 WIDE
AN ATTACHMENT
9D-2193 CUTTING EDGE REPLACEMENT GROUP
9D2193 CUTTING EDGE REPLACEMENT GROUP--FLAT 14 FOOT--1.00" THICK
X 10.00" WIDE
AN ATTACHMENT
9D-2192 EDGE GP-CUTTING
9D2192 CUTTING EDGE REPLACEMENT GROUP--FLAT 16 FOOT--1.00" THICK
X 10.00" WIDE
AN ATTACHMENT
TOOTH GP-RIPPER
8J-2189 TOOTH GP-RIPPER
8J2189 TOOTH GROUP
Serial No. 59M1-Up
Also part of 8J8971 Basic Ripper Arrangement shown on Page 174A
RIPPER GP
8J-8970 RIPPER AR
8J8970 16G RIPPER ARRANGEMENT
AN ATTACHMENT
RIPPER AR
8J-8971 RIPPER AR
8J8971 BASIC RIPPER ARRANGEMENT
Serial No. 59M1 to 59M213, 59M215 and 59M217 inclusive
Part of 8J8970 Ripper Arrangement listed on Page 173. 8J2189 Tooth parts are shown on Page 175
Note: One or Two 8J2189 Tooth Groups may be added to convert to a Four or Five Tooth Ripper
RIPPER AR
8J-8971 RIPPER AR
8J8971 BASIC RIPPER ARRANGEMENT
Serial No. 59M214, 59M216 and 59M218-Up
Part of 8J8970 Ripper Arrangement listed on Page 173. 8J2189 Tooth parts are shown on Page 175
Note: One or two 8J2189 Tooth Groups may be added to convert to a Four or Five Tooth Ripper
MOUNTING GP-RIPPER
8J-5333 MOUNTING GP-RIPPER
8J5333 RIPPER MOUNTING GROUP
Part of 8J8970 Ripper Arrangement listed on Page 173

Information:

(For parts list, see above)

Special Instruction
Modifying Early Drawbars To Accept A Bolt-On Ball{6153, 6157, 6170, 6171}
Modifying Early Drawbars To Accept A Bolt-On Ball{6153, 6157, 6170, 6171}
Test Procedure For Automatic Blade Control On Articulated Motor Graders{5216}
Test Procedure For Automatic Blade Control On Articulated Motor Graders{5216}
Installation of 8W2408 Blade Float Arrangement{5241}
Installation of 8W2408 Blade Float Arrangement{5241}
Installation Of Blade Cushion Accumulator Arrangements{5077}
Installation Of Blade Cushion Accumulator Arrangements{5077}
Modifications To Blade Cushion Attachments{5077}
Modifications To Blade Cushion Attachments{5077}
Specifications
Blade Tip
16G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING
Centershift And Blade Lift
16G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING
Blade Lift Group
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Reuse And Salvage Guidelines
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Disassembly and Assembly
Blade Lift Arms
16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Bar
16G MOTOR GRADER VEHICLE SYSTEMS
Blade Cushion Accumulator
16G MOTOR GRADER VEHICLE SYSTEMS
Blade
16G MOTOR GRADER VEHICLE SYSTEMS
Blade Assembly
16G MOTOR GRADER VEHICLE SYSTEMS
Blade Sideshift Lock Check Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Lock Check And Relief Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Lock Check Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Tip Lock Check Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Lock Check And Relief Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Cylinders
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Arms
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Bar
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Sideshift Cylinder
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Centershift Cylinder
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Tip Cylinder
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Assembly
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Service Magazine
Valve Assembly Used In Centershift Lock Control Group To Prevent Accidental Rotation And Lowering Of Blade{5220,5221,5223,6151}
1980/10/20
Valve Assembly And Nipple Moved From Centershift Lock Control Group To Brake Control Group To Prevent Unauthorized Operation{4282,4267,5220,5221,5223,6151}
1980/11/10
Repair Procedure For Blade Tip Shaft Bores{6154,6151}
1981/04/20
New Blade Tip Brackets Used With New Circle And Beam Assembly For Stronger Blade Support{5254,6154}
1981/06/22
Replacement Moldboard Rail Sections Are Available{5230,6151}
1981/08/10
Shorter Wiper Blade Prevents Contact With Windshield Seal{7305}
1981/11/23
Correct Position Of Shims In Blade Lift And Centershift Cylinder Groups{5102,5223}
1982/04/12
New, Narrower Blade Tip Brackets Used{5254,6154}
1982/10/11
New Wear Strips For Moldboard Rail Will Increase Service Life Of The Rail{5230}
1984/03/12
New Control Valve Group Lets Blade Tip Forward Or Backward At Same Speed {5106}
1984/06/25
Improved Adjustment Procedure For Blade Rail Wear Strips{6151,6174}
1985/12/09
Steel Wear Strips Available For Motor Grader Blade Rail{6150,6153}
1986/06/02
New Bearings For Circle Beam And Blade Bracket Provide Longer Service Life{6154,5254}
1986/09/08
Modification Of Circuitry In 9D6720 Junction Box Prevents Failure Of Automatic Blade Control{5260}
1977/03/21
New Windshield Wiper Group Uses Single Arm Instead Of Double Parallel Arm, And Shorter Blade Arc (Movement){7305}
1977/04/11
Centershift Extension Groups: A Better Method To Cut A Bank Slope At A 2:1 Ratio{5229,6151}
1977/04/11
New Accumulator With Improved Piston And Seals Used In Blade Cushion Arrangement And Steering System{5077,5200,4300}
1977/06/20
Correct Adjustment Of Automatic Blade Control For Accuracy Of Slope Angle Cut In Relation To Slope Control Dial Position{5216}
1977/10/03
New Bearing Used In Blade Tip Brackets; Different Moldboard Pivot Shafts Used {5254,6151}
1978/04/17
One-Piece Wear Strip Is Replacement For Two-Piece Wear Plate And Adjustment Screw On The Moldboard Sideshift{6154,6151}
1978/05/22
Changes Can Be Made To Improve Blade Cushion Arrangement{5200,6150,5077}
1978/12/04
Modification To Make The Snow Wing And/Or Blade Sideshift Move Faster{5227,6150}
1988/04/18
New Mounting Pin Assemblies For Blade Tip Cylinder {5106}
1988/11/28
New Blade Lift And Centershift Cylinders Have Caps With Shims For Adjustment{5102,5223}
1979/03/12
Adjustment Procedure For Blade Lift Cylinders And Centershift Cylinders{5223,5102}
1979/03/26
More Information About Use Of Shims With New One-Piece Wear Strips In Circle Groups For Hydraulic Sideshift Moldboards{6154,6151}
1979/07/02
During Predelivery, Make Sure Nitrogen Charge Pressure Is Correct In Blade Cushion Accumulators{5077}
1989/10/16
Steel Wear Strips Can Be Modified To Make Them Adjustable {6151}
1990/02/05
New End Bits Used On Moldboards {6804}
1992/03/09
New Blade Lift Valves Used For Easier Addition Of Valve Sections To The Valve Group {5051}
1993/10/04
Thicker Retaining Ring Is Available For Use With CAT® GraderBit Assemblies{6151,6150}
1994/02/14
Special Instructions SEHS9896, REHS0037 And REHS0038 Available For Installation Of A Bolt-On Ball On Early Drawbars{6153,6157,6170,6171}
1996/11/11
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
2001/04/23
Hardened Full Length Moldboard Rails Are Available for Parts Service {6151}
2001/09/04
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Special Instruction
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
Procedure To Adjust Support Bearing Preload And Gear Backlash (Tooth Clearance) For Bevel Gear And Pinion{3258,3256,3257}
1980/04/14
6V6037, 6V6038, And 6V6039 Template Available For Installation Of Circle Tooth Segments{0626,6152}
1982/05/10
Circles With Cracked Or Broken Teeth Can Be Repaired With Fabricated Fixture And Circle Segment{6154,0665}
1978/02/06
Circle Segments Are Now Available To Make Repairs To Circles That Have Cracked Or Broken Teeth{6154}
1979/02/05
New Heavy-Duty Ripper Shank And Tips Available {6808,6810}
1989/05/08
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
New End Bits Used On Moldboards {6804}
1992/03/09
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
2001/04/23
New Adapters for the Moldboard are Now Available on Certain Motor Graders {6174, 6801, 6804}
2015/02/10
Specifications
Mounting For Ripper
16G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING
Service Magazine
Stronger Ripper Cylinder{5352,6164}
1977/07/11
New Heavy-Duty Ripper Shank And Tips Available {6808,6810}
1989/05/08
Procedure to Adapt Different Rippers to Different Series 16 Motor Graders {6324}
Procedure to Adapt Different Rippers to Different Series 16 Motor Graders {6324}
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Hydraulic Swivel {0679, 5060}
Thermal Spray Procedures for Hydraulic Swivel {0679, 5060}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Truck sale:

Caterpillar 16G
 
Caterpillar 16G
- motor graders
FINNING CANADA
Caterpillar 16G, motor graders, Construction
 
Caterpillar 16G, motor graders, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Caterpillar 16G
 
Caterpillar 16G
- motor graders
EMPIRE MACHINERY
 
89,900 
Caterpillar 16G, motor graders, Construction

EMPIRE MACHINERY
Caterpillar 16G, motor graders, Construction
31,500 
Caterpillar 16G, motor graders, Construction

ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.