AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8D3790 FRAME AND CASE GROUP Serial No. 93U1070-Up 16G MOTOR GRADER


FRAME AND BODY
CASE & FRAME GP
IMPLEMENTS
CIRCLE GP
FUEL SYSTEM
TANK GP-FUEL

MOTOR GRADER 16G MOTOR GRADER 93U
 16G MOTOR GRADER 93U00001-01178 (MACHINE) UEG0737S 16G 93U   (1973)

FRAME AND BODY

CASE & FRAME GP
CASE & FRAME GP
8D-3790 CASE & FRAME GP
CASE & FRAME GP
8D-3790 CASE & FRAME GP
CASE & FRAME GP
8D-3790 CASE & FRAME GP
 

#UEG0737S0300
 

8D-3790: CASE & FRAME GP

8D3790 FRAME AND CASE GROUP
Serial No. 93U1070-Up
c164617 UEG0737S
8D3790 CASE & FRAME GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-6584 C [1] CASE ASSEM.  
    (Includes)
2. 8D-3645 [1] PLATE ASSEM.  
3. 8D-3530 [1] PLATE ASSEM.  
4. 8D-3508 [3] BOSS  
5. 1B-3310 [10] WASHER  
6. 7F-3206 [2] LUG  
7. 8F-9836 [14] LUG  
8. 6M-7939 [4] LUG  
9. 2R-1694 [2] SPACER  
10. 6B-5262 [1] PLUG  
  2A-3398 C [1] GASKET  
11. 7D-2838 [46] STUD  
12. 3D-8439 [10] STUD  
13. 7M-0348 C [1] DOWEL  
  C   INDICATES CHANGE
 

#UEG0737S0301
 

8D-4875: CIRCLE GP

8D4875 CIRCLE GROUP
Serial No. 93U1 to 93U541 inclusive
c172490 UEG0737S
8D4875 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1621 [10] BOLT  
2. 3B-4508 [34] LOCKWASHER  
3. 5D-4360 [2] CLAMP  
4. 6D-4178 [1] BAR ASSEM.  
5. 3H-5244 [2] NUT (castle)  
  5F-2401 [2] NUT (plain)  
6. 7F-8564 [4] PIN  
  3B-4617 [4] COTTER PIN  
  1K-7077 [4] WASHER  
7. 0S-1587 [24] BOLT  
8. 6D-6227 [8] BLOCK  
9. 7F-3708 C [2] PIN  
  3B-4615 [2] COTTER PIN  
10. 1B-4156 [2] NUT  
  5D-2360 [4] WASHER .188 in. (4.78 mm) thick  
  5D-2361 [2] WASHER .375 in. (9.53 mm) thick  
  5D-2359 [10] SHIM .020 in. (.51 mm) thick  
11. 8D-2348 [2] NUT  
12. 8D-2345 [1] BRACKET ASSEM. (R.H.)  
13. 8D-2343 [1] BEARING  
14. 9D-6584 [4] SEAL  
15. 8D-4547 [1] GUARD ASSEM.  
16. 4H-7728 [4] LUG  
17. 4B-4280 [2] WASHER  
  8F-4028 [2] SPACER  
18. 8D-2344 [1] BRACKET ASSEM. (L.H.)  
  8D-2343 [1] BEARING  
19. 6D-9676 [4] SHIM .060 in. (1.52 mm) thick  
  6D-9675 [4] SHIM .030 in. (.76 mm) thick  
20. 4B-3584 C [6] SCREW  
21. 6D-6229 [4] PLATE  
  6D-6228 [4] PLATE  
22. 4B-3596 C [4] SCREW  
23. 8D-2355 [1] CIRCLE AND BEAM ASSEM.  
24. 8F-9836 [4] LUG  
25. 9D-5371 [1] BRACE  
26. 8D-5602 [1] BEAM (R.H.)  
27. 5D-2357 [2] SHAFT  
28. 5D-4156 [2] BRACKET  
29. 8D-2349 [2] SHAFT  
30. 8D-5603 [1] BEAM (L.H.)  
31. 9D-5369 [1] BRACE  
32. 9D-0971 [1] PLATE  
  2G-9633 CH [1] SEGMENT (circle gear)  
    (4 teeth--not shown--service repair for worn or damaged teeth)
  C   INDICATES CHANGE
  H   NOT PART OF 8D4875 CIRCLE GROU
 

#UEG0737S0302
 

8D-4875: CIRCLE GP

8D4875 CIRCLE GROUP
Serial No. 93U542 to 93U700 inclusive
c172491 UEG0737S
8D4875 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1621 [10] BOLT  
2. 3B-4508 [34] LOCKWASHER  
3. 9D-7034 C [2] CLAMP  
4. 9D-7068 C [1] BAR  
5. 5F-2401 C [4] NUT  
6. 7F-8564 C [2] PIN  
  3B-4617 C [2] COTTER PIN  
  1K-7077 C [2] WASHER  
7. 0S-1587 [24] BOLT  
8. 6D-6227 [8] BLOCK  
9. 7F-3708 [2] PIN  
  3B-4615 [2] COTTER PIN  
10. 1B-4156 [2] NUT  
  5D-2360 [4] WASHER .188 in. (4.78 mm) thick  
  5D-2361 [2] WASHER .375 in. (9.53 mm) thick  
  5D-2359 [10] SHIM .02 in. (.508 mm) thick  
11. 8D-2348 [2] NUT  
12. 8D-2345 [1] BRACKET ASSEM. (R.H.)  
    (Includes)
13. 8D-2343 [1] BEARING  
14. 9D-6584 [4] SEAL  
15. 8D-4547 [1] GUARD ASSEM.  
    (Includes)
16. 4H-7728 [4] LUG  
17. 4B-4280 C [10] WASHER  
18. 8D-2344 [1] BRACKET ASSEM. (L.H.)  
    (Includes)
  8D-2343 [1] BEARING  
19. 6D-9676 [4] SHIM .06 in. (1.52 mm) thick  
  6D-9675 [4] SHIM .03 in. (.762 mm) thick  
20. [6] SCREW  
21. 6D-6229 [4] PLATE  
  6D-6228 [4] PLATE  
22. 4B-3596 C [4] SCREW  
23. 8D-2355 [1] CIRCLE AND BEAM ASSEM.  
    (Includes)
24. 8F-9836 [4] LUG  
25. 9D-5371 [1] BRACE  
26. 8D-5602 [1] BEAM (R.H.)  
27. 5D-2357 [2] SHAFT  
28. 5D-4156 [2] BRACKET  
29. 8D-2349 [2] SHAFT  
30. 8D-5603 [1] BEAM (L.H.)  
31. 9D-5369 [1] BRACE  
32. 9D-0971 [1] PLATE  
33. 9D-8588 C [1] ADAPTER  
34. 9D-9523 C [2] PLATE ASSEM.  
35. 8F-4028 C [2] SPACER  
  2G-9633 CH [1] SEGMENT (circle gear)  
    (4 teeth-not shown- service repair for worn or damaged teeth)
  C   INDICATES CHANGE
  H   NOT PART OF 8D4875 CIRCLE GROU
 

#UEG0737S0303
 

8D-4875: CIRCLE GP

8D4875 CIRCLE GROUP
Serial No. 93U701 to 93U802 inclusive
c172492 UEG0737S
8D4875 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1621 C [2] BOLT  
2. 3B-4508 C [28] LOCKWASHER  
3. 0S-1595 C [2] BOLT  
4. 9D-7068 [1] BAR  
5. 5F-2401 [4] NUT  
6. 7F-8564 [2] PIN  
  3B-4617 [2] COTTER PIN  
  1K-7077 [2] WASHER  
7. 0S-1585 C [20] BOLT  
8. 6D-6227 [8] BLOCK  
9. 7F-3708 [2] PIN  
  3B-4615 [2] COTTER PIN  
10. 1B-4156 [2] NUT  
  5D-2360 [4] WASHER .188 in. (4.78 mm) thick  
  5D-2361 [2] WASHER .375 in. (9.53 mm) thick  
  5D-2359 [10] SHIM .02 in. (.508 mm) thick  
11. 8D-2348 [2] NUT  
12. 8D-2345 [1] BRACKET ASSEM. (R.H.)  
    (Includes)
13. 8D-2343 [1] BEARING  
14. 9D-6584 [4] SEAL  
15. 2G-1861 C [1] GUARD ASSEM.  
16. 8D-7481 C [2] BRACKET ASSEM.  
    (Each Includes)
  1F-0748 [1] NUT  
17. 4B-4280 C [4] WASHER  
18. 8D-2344 [1] BRACKET ASSEM. (L.H.)  
    (Includes)
  8D-2343 [1] BEARING  
19. 2G-2946 C [6] SHIM 1.52 mm(.060 in.) thick  
  2G-2945 C [6] SHIM .762 mm(.030 in.) thick  
20. 0S-1587 C [4] BOLT  
21. 6D-6229 [4] PLATE  
  6D-6228 [4] PLATE  
22. 4B-3596 C [4] SCREW  
23. 8D-2355 [1] CIRCLE AND BEAM ASSEM.  
    (Includes)
24. 8F-9836 [4] LUG  
25. 9D-5371 [1] BRACE  
26. 8D-5602 [1] BEAM (R.H.)  
27. 5D-2357 [2] SHAFT  
28. 5D-4156 [2] BRACKET  
29. 8D-2349 [2] SHAFT  
30. 8D-5603 [1] BEAM (L.H.)  
31. 9D-5369 [1] BRACE  
32. 9D-0971 [1] PLATE  
33. 9D-8588 [1] ADAPTER  
34. 9D-9523 [2] PLATE ASSEM.  
35. 8F-4028 C [4] SPACER  
  2G-9633 CH [1] SEGMENT (circle gear)  
    (4 teeth - not shown - service repair for worn or damaged teeth)
  C   INDICATES CHANGE
  H   NOT PART OF 8D4875 CIRCLE GROU
 

#UEG0737S0304
 

8D-4875: CIRCLE GP

8D4875 CIRCLE GROUP
Serial No. 93U803 to 93U906 inclusive
c172493 UEG0737S
8D4875 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1621 [2] BOLT  
2. 3B-4508 [28] LOCKWASHER  
3. 0S-1595 [2] BOLT  
4. 9D-7068 [1] BAR  
5. 5F-2401 [4] NUT  
6. 7F-8564 [2] PIN  
  3B-4617 [2] COTTER PIN  
  1K-7077 [2] WASHER  
7. 0S-1585 [20] BOLT  
8. 6D-6227 [8] BLOCK  
9. 7F-3708 [2] PIN  
  3B-4615 [2] COTTER PIN  
10. 1B-4156 [2] NUT  
  5D-2360 [4] WASHER 4.78 mm(.188 in.)thick  
  5D-2361 [2] WASHER 9.53 mm(.375 in.)thick  
  5D-2359 [10] SHIM .508 mm(.02 in.)thick  
11. 8D-2348 [2] NUT  
12. 2G-3347 C [1] BRACKET (R.H.)  
15. 2G-1861 [1] GUARD ASSEM.  
16. 8D-7481 [2] BRACKET ASSEM.  
    (Each Includes)
  1F-0748 [1] NUT  
17. 4B-4280 [4] WASHER  
18. 2G-3346 C [1] BRACKET (L.H.)  
19. 2G-2946 [6] SHIM 1.52 mm(.060 in.)thick  
  2G-2945 [6] SHIM .762 mm(.030 in.)thick  
20. 0S-1587 [4] BOLT  
21. 6D-6229 [4] PLATE  
  6D-6228 [4] PLATE  
22. 4B-3596 [4] SCREW  
23. 8D-2355 [1] CIRCLE AND BEAM ASSEM.  
    (Includes)
24. 8F-9836 [4] LUG  
25. 2G-2123 C [1] BRACE  
26. 8D-5602 [1] BEAM (R.H.)  
27. 5D-2357 [2] SHAFT  
28. 5D-4156 [2] BRACKET  
29. 8D-2349 [2] SHAFT  
30. 8D-5603 [1] BEAM (L.H.)  
31. 2G-2122 C [1] BRACE  
32. 9D-0971 [1] PLATE  
33. 9D-8588 [1] ADAPTER  
34. 9D-9523 [2] PLATE ASSEM.  
35. 8F-4028 [4] SPACER  
  2G-9633 CH [1] SEGMENT (circle gear)  
    (4 teeth--not shown--service repair for worn or damaged teeth)
  C   INDICATES CHANGE
  H   NOT PART OF 8D4875 CIRCLE GROU
 

#UEG0737S0305
 

8D-4875: CIRCLE GP

8D4875 CIRCLE GROUP
Serial No. 93U907-Up
c172494 UEG0737S
8D4875 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1621 [2] BOLT  
2. 3B-4508 [28] LOCKWASHER  
3. 0S-1595 [2] BOLT  
4. 9D-7068 [1] BAR  
5. 5F-2401 [4] NUT  
6. 7F-8564 [2] PIN  
  3B-4617 [2] COTTER PIN  
  1K-7077 [2] WASHER  
7. 0S-1585 [20] BOLT  
8. 6D-6227 [8] BLOCK  
9. 7F-3708 [2] PIN  
  3B-4615 [2] COTTER PIN  
10. 1B-4156 [2] NUT  
  5D-2360 [4] WASHER 4.78 mm(.188 in.)thick  
  5D-2361 [2] WASHER 9.53 mm(.375 in.)thick  
  5D-2359 [10] SHIM .508 mm(.02 in.)thick  
11. 8D-2348 [2] NUT  
12. 2G-3347 [1] BRACKET (R.H.)  
15. 2G-1861 [1] GUARD ASSEM.  
16. 8D-7481 [2] BRACKET ASSEM.  
    (Each Includes)
  1F-0748 [1] NUT  
17. 4B-5273 C [4] WASHER  
18. 2G-3346 [1] BRACKET (L.H.)  
19. 2G-2946 [6] SHIM 1.52 mm(.060 in.) thick  
  2G-2945 [6] SHIM .762 mm(.030 in.)thick  
20. 0S-1587 [4] BOLT  
21. 6D-6229 [4] PLATE  
  6D-6228 [4] PLATE  
22. 4B-3596 [4] SCREW  
23. 8D-2355 [1] CIRCLE AND BEAM ASSEM.  
    (Includes)
24. 8F-9836 [4] LUG  
25. 2G-2123 [1] BRACE  
26. 8D-5602 [1] BEAM (R.H.)  
27. 5D-2357 [2] SHAFT  
28. 5D-4156 [2] BRACKET  
29. 2G-5837 C [2] SHAFT  
30. 8D-5603 [1] BEAM (L.H.)  
31. 2G-2122 [1] BRACE  
32. 9D-0971 [1] PLATE  
33. 9D-8588 [1] ADAPTER  
34. 9D-9523 [2] PLATE ASSEM.  
35. 8F-4028 [4] SPACER  
  2G-9633 CH [1] SEGMENT (circle gear)  
    (4 teeth-not shown-service repair for worn or damaged teeth)
  C   INDICATES CHANGE
  H   NOT PART OF 8D4875 CIRCLE GROU
 

#UEG0737S0306
 

9D-2450: CIRCLE GP

9D2450 CIRCLE GROUP--Type 1
Part of 8D9755 and 8D9760 Blade Control Arrangements listed on Pages 170-1 and 170A
c172489 UEG0737S
9D2450 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-4928 [1] CIRCLE AND BEAM ASSEM.  
    (Includes)
  8D-2355 [1] CIRCLE AND BEAM ASSEM.  
    (Includes)
  9D-0971 [1] PLATE  
2. 8F-9836 [4] LUG  
3. 9D-5371 [1] BRACE (R.H.)  
  9D-5369 [1] BRACE (L.H.)  
4. 5D-2357 [2] SHAFT  
5. 5D-4156 [2] BRACKET  
6. 8D-2349 [2] SHAFT  
7. 8D-5602 [1] BEAM (R.H.)  
  8D-5603 [1] BEAM (L.H.)  
8. 9D-8588 [1] ADAPTER  
9. 6D-3983 [1] SUPPORT ASSEM.  
    (Includes)
  8D-4696 [3] MACHINE SCREW  
10. 3P-1529 [1] LEVEL  
11. 1A-8096 [3] SPRING  
12. 6D-6339 [1] BUSHING  
13. 6D-3982 [3] NUT  
14. 6D-3994 [1] COVER  
  2G-9633 CH [1] SEGMENT (circle gear)  
    (4 teeth-Not Shown--service repair for worn or damaged teeth)
  C   INDICATES CHANGE
  H   NOT PART OF 9D2450 CIRCLE GROU
 

#UEG0737S0307
 

9D-2450: CIRCLE GP

9D2450 CIRCLE GROUP--Type 2
Part of 8D9755 and 8D9760 Blade Control Arrangements listed on Pages 170-1 & 170A
AN ATTACHMENT
c180527 UEG0737S
9D2450 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-4928 [1] CIRCLE AND BEAM ASSEM.  
    (Includes)
  6G-6804 C [1] CIRCLE AND BEAM ASSEM.  
    (Includes)
  7D-3532 C [1] REINFORCEMENT  
2. 8F-9836 [4] LUG  
3. 2G-2122 C [1] BRACE (R.H.)  
  2G-2123 C [1] BRACE (L.H.)  
4. 2G-5837 C [2] SHAFT  
5. 4D-7438 C [1] ADAPTER  
  4D-7437 [1] ADAPTER  
6. 8D-5603 [1] BEAM (R.H.)  
  8D-5603 [1] BEAM (L.H.)  
7. 9D-8588 [1] ADAPTER  
8. 9D-9523 C [2] PLATE ASSEM.  
9. 6D-3983 [1] SUPPORT ASSEM.  
    (Includes)
  8D-4696 [3] MACHINE SCREW  
10. 3P-1529 [1] LEVEL  
11. 1A-8096 [3] SPRING  
12. 6D-6339 [1] BUSHING  
13. 6D-3982 [3] NUT  
14. 6D-3994 [1] COVER  
  2G-9633 CH [1] SEGMENT (circle gear)  
    (4 teeth-Not Shown-Service repair for worn or damaged teeth)
  C   INDICATES CHANGE
  H   NOT PART OF 9D2450 CIRCLE GROU
 

#UEG0737S0308
 

8D-4970: TANK GP-FUEL

8D4970 FUEL TANK GROUP
Serial No. 93U1 to 93U627 inclusive
c152602 UEG0737S
8D4970 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5202 [1] TANK ASSEM.  
2. 4D-8778 [1] TUBE ASSEM.  
  4D-1999 [1] FITTING  
3. 9F-2978 [2] NUT  
4. 4H-9027 [2] PLUG  
5. 4B-1455 [1] CAP ASSEM.  
6. 4B-1663 [1] ELEMENT  
7. 4B-5949 C [1] ELEMENT  
8. 4B-1453 [1] GASKET  
9. 3F-4135 [1] BAFFLE  
10. 2B-4031 [1] GASKET  
11. 7F-7461 [1] SCREW  
12. 7B-2001 [1] WASHER  
13. 8D-4442 [1] PLUNGER  
14. 4D-1998 [1] STRAINER ASSEM.  
15. 1A-2540 [1] LOCK  
16. 7B-3235 [2] BOLT  
  1D-4719 [2] NUT  
  6L-8261 [2] WASHER  
17. 3B-4508 [4] LOCKWASHER  
18. 1H-8306 [1] SCREW  
19. 5K-9246 [1] CONNECTOR  
20. 8D-4443 [1] TUBE ASSEM.  
21. 3B-5011 [1] CLIP  
22. 1D-4620 [2] BOLT  
  1B-4331 [2] NUT  
  3B-4512 [2] LOCKWASHER  
  2S-0115 [4] WASHER  
23. 1A-5822 [10] BOLT  
  9F-4831 [10] SPACER  
24. 6D-9081 [24] RETAINER  
25. 0S-1616 [1] BOLT  
  1B-4330 [1] NUT  
  3B-4504 [1] LOCKWASHER  
26. 1B-5174 [1] PLUG  
27. 9D-5121 [2] PLATE  
28. 6H-1717 [2] BOLT  
29. 0V-0375 [14] BOLT  
30. 9D-3065 [2] BRACE  
 

#UEG0737S0309
 

8D-4970: TANK GP-FUEL

8D4970 FUEL TANK GROUP
Serial No. 93U628 to 93U783 inclusive
c152895 UEG0737S
8D4970 TANK GP-FUEL Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-1004 C [1] TANK ASSEM.  
2. 4D-8778 [1] TUBE ASSEM.  
3. 8F-9836 [3] LUG  
4. 9F-2978 [4] NUT  
5. 4B-1455 [1] CAP ASSEM.  
6. 4B-1663 [1] ELEMENT  
7. 4B-5949 C [1] ELEMENT  
8. 4B-1453 [1] GASKET  
9. 3F-4135 [1] BAFFLE  
10. 2B-4031 [1] GASKET  
11. 7F-7461 [1] SCREW  
12. 7B-2001 [1] WASHER  
13. 8D-4442 [1] PLUNGER  
14. 4D-1998 [1] STRAINER ASSEM.  
15. 1A-2540 [1] LOCK  
16. 7B-3235 [2] BOLT  
  1D-4719 [2] NUT  
  6L-8261 [2] WASHER  
17. 3B-4508 [4] LOCKWASHER  
18. 1H-8306 [1] SCREW  
19. 5K-9246 [1] CONNECTOR  
20. 8D-4443 [1] TUBE ASSEM.  
21. 3B-5011 [1] CLIP  
22. 1D-4620 [2] BOLT  
  1B-4331 [2] NUT  
  3B-4512 [2] LOCKWASHER  
  2S-0115 [4] WASHER  
23. 1A-5822 [10] BOLT  
24. 6D-9081 [24] RETAINER  
25. 0S-1616 [1] BOLT  
  1B-4330 [1] NUT  
  3B-4504 [1] LOCKWASHER  
26. 1B-5174 [1] PLUG  
27. 9D-5121 [2] PLATE  
28. 6H-1717 [2] BOLT  
29. 0V-0375 [14] BOLT  
30. 9D-3065 [2] BRACE  
31. 4H-9027 [2] PLUG  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Specifications
Frame And Case
14G & 16G MOTOR GRADERS POWER TRAIN
Frame And Case Groups
14G & 16G MOTOR GRADERS POWER TRAIN
Reuse And Salvage Guidelines
Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066}
Dimensions for Articulated Joints and Steering Cylinder Bores for Motor Graders {7050, 7051, 7065, 7066}
Disassembly and Assembly
Main Frames
16G MOTOR GRADER VEHICLE SYSTEMS
Main Frames
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Service Magazine
Installation Tips For Snow Wing{6150,7051,1356,7155}
1980/12/22
Different Washers Must Be Used On Motor Graders With Improved Front Frame{7051}
1984/02/27
Stronger Brackets Used To Mount The Hydraulic Implement Control Valves{7050,7051}
1984/05/21
Inspect Articulated Hitch; New Assembly Procedure For Seal Above Tapered Roller Bearing{7051}
1977/03/28
Change To Front Frame Decreases Stress On Oscillation Bearings{4313,7051}
1977/05/16
Improved Frame Has Stronger Boss For Upper Hitch Pivot Pin; Reinforcement Can Be Added To Earlier Frames{7051}
1979/07/09

Caterpillar Parts SIS Catalog 16G :

CASE & FRAME GP
8D-3790 CASE & FRAME GP
CASE & FRAME GP
8D-3790 CASE & FRAME GP
FRONT FRAME GROUP
9D-2455 FRONT FRAME GROUP
FRONT FRAME GROUP
9D-2455 FRONT FRAME GROUP
FRONT FRAME GROUP
9D-2455 FRONT FRAME GROUP
FRONT FRAME GROUP
8D-7270 FRONT FRAME GROUP
FRONT FRAME GROUP
8D-7270 FRONT FRAME GROUP
FRONT FRAME GROUP
8D-7270 FRONT FRAME GROUP
CIRCLE GP
8D-4875 CIRCLE GP
CIRCLE GP
8D-4875 CIRCLE GP
CIRCLE GP
8D-4875 CIRCLE GP
CIRCLE GP
8D-4875 CIRCLE GP
CIRCLE GP
8D-4875 CIRCLE GP
CIRCLE GP
9D-2450 CIRCLE GP
CIRCLE GP
9D-2450 CIRCLE GP
TANK GP-FUEL
8D-4970 TANK GP-FUEL

Truck sale:

Caterpillar 16G
 
Caterpillar 16G
- motor graders
FINNING CANADA
Caterpillar 16G, motor graders, Construction
 
Caterpillar 16G, motor graders, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Caterpillar 16G
 
Caterpillar 16G
- motor graders
EMPIRE MACHINERY
 
89,900 
Caterpillar 16G, motor graders, Construction

EMPIRE MACHINERY
Caterpillar 16G, motor graders, Construction
31,500 
Caterpillar 16G, motor graders, Construction

ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.