AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

MOLDBOARD SHIFT CYLINDER AND MOUNTING (8D4955 N/S) 8J5568 Cylinder parts are shown on Page 122 16G MOTOR GRADER


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-CYLINDER
VALVE GP-CHECK & RELIEF
OPERATOR STATION
CONTROL GP-HYDRAULIC

MOTOR GRADER 16G MOTOR GRADER 93U
 16G MOTOR GRADER 93U00001-01178 (MACHINE) UEG0737S 16G 93U   (1973)

HYDRAULIC SYSTEM

CYLINDER GP
BLADE LIFT CYLINDER GROUP
8J-5827 BLADE LIFT CYLINDER GROUP
CYLINDER & MOUNTING GP
8D-4960 CYLINDER & MOUNTING GP
CYLINDER & MOUNTING GP
8D-4955 CYLINDER & MOUNTING GP
CYLINDER GP-DRAWBAR TIP
8J-3761 CYLINDER GP-DRAWBAR TIP
CYLINDER GP-DRAWBAR TIP
8J-3761 CYLINDER GP-DRAWBAR TIP
CYLINDER GP-BLADE SHIFT
8J-5568 CYLINDER GP-BLADE SHIFT
 

#UEG0737S0370
 

8D-4955: CYLINDER & MOUNTING GP

MOLDBOARD SHIFT CYLINDER AND MOUNTING (8D4955 N/S)
8J5568 Cylinder parts are shown on Page 122
c119463 UEG0737S
8D4955 CYLINDER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-5282 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
2. 1H-4478 [1] PIN  
3. 8J-5568 Y [1] CYLINDER GROUP  
    (Separate Illustration)
4. 1D-4626 [4] BOLT  
  3B-4514 [4] LOCKWASHER  
5. 2D-6341 [1] PIN  
  7B-2501 [1] RING  
6. 9D-2564 [1] BRACKET  
  Y   SEPARATE ILLUSTRATION
 

#UEG0737S0371
 

8J-3761: CYLINDER GP-DRAWBAR TIP

8J3761 DRAWBAR TIP CYLINDER GROUP (Change 0 & 1)--3.00" Bore x 21.62" Stroke
Serial No. 93U1 to 93U570 inclusive. Part of Blade Tip Cylinder and Mounting
c119466 UEG0737S
8J3761 CYLINDER GP-DRAWBAR TIP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-5733 [1] RING  
2. 8J-3762 R [1] CYLINDER ASSEM.  
3. 2D-8652 [1] BEARING  
  8J-3774 [2] RING  
4. 4J-8979 [1] SEAL  
5. 5H-8848 [1] SEAL  
6. 6J-5731 [1] RING  
7. 8J-0556 [1] HEAD  
8. 8J-5911 [1] CROWN  
9. 8J-3764 [1] ROD ASSEM.  
10. 2D-8652 [1] BEARING  
  8J-3774 [2] RING  
11. 8J-5912 [1] SCREW  
12. 5J-8150 [1] SEAL  
13. 7J-5639 [1] BOLT  
14. 6J-9733 [1] SEAL  
15. 6J-1972 [1] SEAL ASSEM.  
16. 8J-0553 [1] PISTON  
17. 8J-7415 [1] WASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0737S0372
 

8J-3761: CYLINDER GP-DRAWBAR TIP

8J3761 DRAWBAR TIP CYLINDER GROUP (Change 2 & 3)--3.00" Bore x 21.62" Stroke
Serial No. 93U571-Up
Part of Blade Tip Cylinder and Mounting shown on Page 120
c150215 UEG0737S
8J3761 CYLINDER GP-DRAWBAR TIP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6J-5733 [1] RING  
2. 8J-3762 R [1] CYLINDER ASSEM.  
3. 2D-8652 [1] BEARING  
  8J-3774 [2] RING  
4. 4J-8980 C [1] SEAL  
5. 5H-8848 [1] SEAL  
6. 6J-5731 [1] RING  
7. 7J-3351 C [1] HEAD  
8. 8J-5911 [1] CROWN  
9. 9J-4798 RC [1] ROD ASSEM.  
10. 2D-8652 [1] BEARING  
  8J-3774 [2] RING  
11. 8J-5912 [1] SCREW  
12. 5J-8175 C [1] SEAL  
13. 7J-5639 [1] BOLT  
14. 6J-9178 C [1] SEAL  
15. 6J-1972 [1] SEAL ASSEM.  
16. 7J-5682 C [1] PISTON  
17. 8J-7415 [1] WASHER  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0737S0373
 

8J-5568: CYLINDER GP-BLADE SHIFT

8J5568 BLADE SHIFT CYLINDER GROUP (Change 0 & 1)--4.25" Bore x 56.75" Stroke
Part of Moldboard Shift Cylinder and Mounting shown on Page 120
c119464 UEG0737S
8J5568 CYLINDER GP-BLADE SHIFT Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-8287 [1] BOLT  
2. 6J-4003 [1] RING  
3. 5J-7854 [1] SEAL ASSEM.  
4. 5J-3620 [1] SEAL  
5. 8J-5912 [1] SCREW  
6. 7J-9910 [1] CROWN  
7. 8J-5565 R [1] ROD ASSEM.  
8. 1K-6982 [1] SEAL  
9. 5J-0964 [1] SEAL  
10. 8J-8431 [1] HEAD  
11. 5J-7865 [1] RING  
12. 1H-6227 [1] SEAL  
13. 8J-5567 R [1] CYLINDER ASSEM.  
14. 8J-8430 [1] PISTON  
15. 4K-0684 [1] WASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0737S0374
 

8D-5145: LINES GP-LIFT CYLINDER

LIFT CYLINDER LINES (8D5145 N/S)
8J5458 and 8J9303 Valve parts are shown on Pages 113 and 124
c119516 UEG0737S
8D5145 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2673 [4] CONNECTOR  
2. 3K-0360 [24] SEAL  
3. 9D-6055 [4] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0179 H HOSE 172 cm(67.72 in.)  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
4. 9D-5933 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0179 H HOSE 108 cm(42.52 in.)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  9S-9727 [1] COUPLING ASSEM. (45 degrees)  
  3S-8606 [2] SLEEVE  
5. 9S-4191 [4] PLUG  
  3J-1907 [4] SEAL  
6. 8D-5955 [4] BLOCK  
7. 8D-4854 [2] CLAMP  
8. 0S-0509 [8] BOLT  
  4B-4278 [8] WASHER  
9. 3B-4506 [14] LOCKWASHER  
10. 8M-0505 [8] CONNECTOR  
11. 8D-4859 [2] TUBE ASSEM.  
12. 030-7948 [12] ELBOW  
13. 9D-6056 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0179 H HOSE 116 cm(45.67 in.)  
  9S-9727 [2] COUPLING  
  3S-8606 [2] SLEEVE  
14. 8D-4858 [2] TUBE ASSEM.  
15. 0L-1143 [6] BOLT  
16. 8J-5458 Y [1] VALVE GROUP (R.H. Check)  
  8J-9303 Y [1] VALVE GROUP (L. H. Check)  
    (Separate Illustration)
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
 

#UEG0737S0375
 

8J-9303: CHECK & RELIEF VALVE GP

8J9303 CHECK AND RELIEF VALVE GROUP
Part of 8D5145 Lift Cylinder Lines Group shown on Page 123
c225824 UEG0737S
8J9303 CHECK & RELIEF VALVE GP Parts scheme
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] VALVE  
2. [1] SHIM 1.22 mm(.048 in.)thick  
  5J-6153 [4] SHIM .193 mm(.0076 in.)thick  
3. 2J-6089 [1] SPRING  
4. 3K-6116 C [4] WASHER  
5. 9J-4871 C [2] BALL  
6. 9J-0404 [2] PLUG  
  7J-9933 [2] SEAL  
7. 9J-0403 [2] SPRING  
8. 9J-8274 C [1] BODY ASSEM.  
9. 8J-5456 [2] ADAPTER  
  3D-2824 [2] SEAL  
10. 8J-5438 [2] CHOKE  
11. 4J-5309 [1] SEAL  
12. 8J-9250 [1] PLUG  
  3K-0360 [1] SEAL  
  C   INDICATES CHANGE
 

#UEG0737S0376
 

9D-3590: CONTROL AR-HYDRAULIC

9D3590 HYDRAULIC CONTROL ARRANGEMENT
AN ATTACHMENT
UEG0737S0376 UEG0737S
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8D-5770 Y [1] RIPPER LINES GROUP  
  9D-1590 Y [1] RIPPER LINKAGE AND VALVE GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEG0737S0377
 

2G-6915: HYDRAULIC CONTROL ARRANGEMENT

2G6915 HYDRAULIC CONTROL ARRANGEMENT
DOZER/PLOW & WING
AN ATTACHMENT
UEG0737S0377 UEG0737S
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2G-6970 Y [1] LINES GROUP  
  2G-6965 Y [1] LINKAGE VALVE GROUP  
  9D-5675 Y [1] WIRING GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEG0737S0378
 

2G-6925: HYDRAULIC CONTROL ARRANGEMENT

2G6925 HYDRAULIC CONTROL ARRANGEMENT
DOZER/PLOW & RIPPER
AN ATTACHMENT
UEG0737S0378 UEG0737S
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2G-6970 Y [1] LINES GROUP  
  2G-6955 Y [1] LINKAGE VALVE GROUP  
  8D-5770 Y [1] LINES GROUP  
  9D-5675 Y [1] WIRING GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEG0737S0379
 

2G-6935: HYDRAULIC CONTROL ARRANGEMENT

2G6935 HYDRAULIC CONTROL ARRANGEMENT
DOZER/PLOW
AN ATTACHMENT
UEG0737S0379 UEG0737S
  For full view, you need register

Parts for your 16G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  2G-6970 Y [1] LINES GROUP  
  2G-6950 Y [1] LINKAGE VALVE GROUP  
  9D-5675 Y [1] WIRING GROUP  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Installation Of Improved Steering Cylinders, Sockets And Crossover Relief Valves On Motor Graders{4303}
Installation Of Improved Steering Cylinders, Sockets And Crossover Relief Valves On Motor Graders{4303}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders
16G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING
Mounting For Articulation Cylinder
16G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING
Cylinder Groups
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Cylinder Mounting
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Ball And Socket Joint Inserts
16G MOTOR GRADER VEHICLE SYSTEMS
Hydraulic Cylinders
16G MOTOR GRADER VEHICLE SYSTEMS
Steering Cylinders
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Adjustment For The Lengths Of The Rods In The Steering Cylinders When The Toe-In For The Front Wheels Is Correct:
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Wheel Lean Cylinder
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Cylinders
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Ball And Socket Joint Inserts
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Sideshift Cylinder
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Centershift Cylinder
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Tip Cylinder
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Articulation Cylinders
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Hydraulic Cylinders
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Service Magazine
Valve Assembly Used In Centershift Lock Control Group To Prevent Accidental Rotation And Lowering Of Blade{5220,5221,5223,6151}
1980/10/20
Valve Assembly And Nipple Moved From Centershift Lock Control Group To Brake Control Group To Prevent Unauthorized Operation{4282,4267,5220,5221,5223,6151}
1980/11/10
Correct Position Of Shims In Blade Lift And Centershift Cylinder Groups{5102,5223}
1982/04/12
New Pin For Moldboard Shift Cylinder Prevents Loss During Operation{5229}
1984/06/04
New Control Valve Group Lets Blade Tip Forward Or Backward At Same Speed {5106}
1984/06/25
Improved Charging Valve For Accumulators And Suspension Cylinders{7107,7201}
1985/06/17
Centershift Extension Groups: A Better Method To Cut A Bank Slope At A 2:1 Ratio{5229,6151}
1977/04/11
Stronger Ripper Cylinder{5352,6164}
1977/07/11
New Hydraulic Cylinder Washers Keep Piston Retaining Bolts Tighter{5200,5213,5223,5229,6150}
1988/05/16
New Mounting Pin Assemblies For Blade Tip Cylinder {5106}
1988/11/28
New Blade Lift And Centershift Cylinders Have Caps With Shims For Adjustment{5102,5223}
1979/03/12
Adjustment Procedure For Blade Lift Cylinders And Centershift Cylinders{5223,5102}
1979/03/26
Steering System Improvements Prevent Possible Damage To Steering Cylinder Sockets{4303,4304,4305,4322}
1979/08/27
Hydraulic Cylinder Drift On All Caterpillar Series G Motor Graders{5050,6150,7562}
1990/04/02
Improved Performance For The Thirteenth Valve{5106,5140,5212}
1992/05/25
New U-Cup Seal And Spacer(s) Replace Cylinder Rod Packing Seal {5101,5102,5103,5104,5213,5223,5229,5265}
1996/06/10
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Cat<SUP>&reg;</SUP> Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/07/21

Caterpillar Parts SIS Catalog 16G :

CYLINDER & MOUNTING GP
8D-4960 CYLINDER & MOUNTING GP
LIFT GP-BLADE
8D-4885 LIFT GP-BLADE
LIFT GP-BLADE
8D-4885 LIFT GP-BLADE
LIFT GP-BLADE
8D-4885 LIFT GP-BLADE
LIFT GP-BLADE
8D-4885 LIFT GP-BLADE
BLADE LIFT CYLINDER GROUP
8J-5827 BLADE LIFT CYLINDER GROUP
CENTERSHIFT CYLINDER GROUP
8J-5874 CENTERSHIFT CYLINDER GROUP
CYLINDER & MOUNTING GP
8D-4945 CYLINDER & MOUNTING GP
CYLINDER GP-DRAWBAR TIP
8J-3761 CYLINDER GP-DRAWBAR TIP
CYLINDER GP-DRAWBAR TIP
8J-3761 CYLINDER GP-DRAWBAR TIP
CYLINDER GP-BLADE SHIFT
8J-5568 CYLINDER GP-BLADE SHIFT
LINES GP-LIFT CYLINDER
8D-5145 LINES GP-LIFT CYLINDER
CHECK & RELIEF VALVE GP
8J-9303 CHECK & RELIEF VALVE GP
9D-3590 CONTROL AR-HYDRAULIC
2G-6915 HYDRAULIC CONTROL ARRANGEMENT
2G-6925 HYDRAULIC CONTROL ARRANGEMENT

Truck sale:

Caterpillar 16G
 
Caterpillar 16G
- motor graders
FINNING CANADA
Caterpillar 16G, motor graders, Construction
 
Caterpillar 16G, motor graders, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Caterpillar 16G
 
Caterpillar 16G
- motor graders
EMPIRE MACHINERY
 
89,900 
Caterpillar 16G, motor graders, Construction

EMPIRE MACHINERY
Caterpillar 16G, motor graders, Construction
31,500 
Caterpillar 16G, motor graders, Construction

ALTORFER INDUSTRIES
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.