AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

518 SKIDDER 50S00597-01288 (MACHINE) POWER TRAIN Caterpillar SIS



WHEEL SKIDDER 518 WHEEL SKIDDER 50S
 518 SKIDDER 50S00597-01288 (MACHINE) UEG0741S 518 50S   (1971)

Parts group 518:

  For full view, you need register
POWER TRAIN
AXLE GP
FRONT FINAL DRIVE AND WHEEL
1V-3341 FRONT FINAL DRIVE AND WHEEL
FRONT FINAL DRIVE AND WHEEL (1V3341 N/S)--2 Required
Serial No. 50S597 to 50S608 inclusive, 55U152 and 55U153 inclusive and 94U1 to 94U79 inclusive
FRONT FINAL DRIVE AND WHEEL GROUP
1V-3341 FRONT FINAL DRIVE AND WHEEL GROUP
1V3341 FRONT FINAL DRIVE AND WHEEL GROUP--2 Required
Serial No. 50S609-Up, 55U154-Up and 94U80-Up
REAR FINAL DRIVE AND WHEEL GROUP
1V-3340 REAR FINAL DRIVE AND WHEEL GROUP
1V3340 REAR FINAL DRIVE AND WHEEL GROUP
Serial No. 50S597 to 50S608 inclusive, 55U152 and 55U153 inclusive and 94U1 to 94U79 inclusive
REAR FINAL DRIVE AND WHEEL GROUP
1V-3340 REAR FINAL DRIVE AND WHEEL GROUP
1V3340 REAR FINAL DRIVE AND WHEEL GROUP
Serial No. 50S609-Up, 55U154-Up and 94U80-Up
AXLE GP-FIXED
1V-4032 AXLE GP-FIXED
1V4032 FIXED AXLE GROUP
CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
2P-1058 CONTROL GP-TRANSMISSION HYD
TRANSMISSION HYDRAULIC CONTROL (2P1058 N/S)
Serial No. 50S597 to 50S738 inclusive, 55U152 to 55U173 and 55U180 inclusive and 94U1 to 94U108 inclusive
Part of 9S5223 Transmission Arrangement shown on Page 30
2P1055 Pressure Control and 2P1056 Selector Valve parts are shown on Pages 40C, 44 and 44A
CONTROL GP-TRANSMISSION HYD
2P-1058 CONTROL GP-TRANSMISSION HYD
2P1058 TRANSMISSION HYDRAULIC CONTROL GROUP
Serial No. 50S739 to 50S905 inclusive, 55U174 to 55U179 and 55U181 to 55U209 inclusive and 94U109-Up
Part of 9S5223 and 3P9402 Transmission Arrangements shown on Pages 30, 30A and 30B
3P4489 Pressure Control and 2P1056 Selector Valve parts are shown on Pages 40D, 44 and 44A
CONTROL GP-TRANSMISSION HYD
2P-1058 CONTROL GP-TRANSMISSION HYD
2P1058 TRANSMISSION HYDRAULIC CONTROL GROUP
Serial No. 50S906-Up and 55U210-Up. Part of 3P9402 Transmission Arrangement shown on Pages 30A
and 30B. 3P4489 Pressure Control Valve and 2P1056 Selector Valve parts are shown on Pages 40D, 44 and 44A
PRESSURE CONTROL GROUP
2P-1055 PRESSURE CONTROL GROUP
2P1055 PRESSURE CONTROL GROUP
Serial No. 50S597 to 50S738 inclusive, 55U152 to 55U173 and 55U180 inclusive and 94U1 to 94U108 inclusive
Part of Transmission Hydraulic Control shown on Page 40
PRESSURE CONTROL GROUP
3P-4489 PRESSURE CONTROL GROUP
3P4489 PRESSURE CONTROL GROUP--Replaced by 3P4490 shown on Page 41
Serial No. 50S739-Up, 55U174 to 55U179 and 55U181-Up and 94U109-Up
Part of 2P1058 Transmission Hydraulic Control Group shown on Pages 40A & 40B
VALVE GP-HYDRAULIC PRESS CONT
3P-4490 VALVE GP-HYDRAULIC PRESS CONT
3P4490 PRESSURE CONTROL GROUP--Field Installation
Serial No. 50S739-Up, 55U174 to 55U179 and 55U181-Up and 94U109-Up
DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
1V-3304 DIFFERENTIAL & BEVEL GEAR GP
1V3304 FRONT DIFFERENTIAL AND BEVEL GEAR GROUP
Serial No. 50S597 to 50S1185 inclusive, 55U152 to 55U254 inclusive and 94U1 to 94U239 inclusive
1V3305 Differential parts are shown on Page 52
DIFFERENTIAL & BEVEL GEAR GP
1V-3304 DIFFERENTIAL & BEVEL GEAR GP
1V3304 FRONT DIFFERENTIAL AND BEVEL GEAR GROUP
Serial No. 50S1186-Up, 55U255-Up and 94U240-Up
1V3305 Differential parts are shown on Page 52
REAR DIFF & BEVEL GEAR GP
1V-3303 REAR DIFF & BEVEL GEAR GP
1V3303 REAR DIFFERENTIAL AND BEVEL GEAR GROUP
Serial No. 50S597 to 50S1185 inclusive, 55U152 to 55U254 inclusive and 94U1 to 94U239 inclusive
1V3305 Differential parts are shown on Page 52
REAR DIFF & BEVEL GEAR GP
1V-3303 REAR DIFF & BEVEL GEAR GP
1V3303 REAR DIFFERENTIAL AND BEVEL GEAR GROUP
Serial No. 50S1186-Up, 55U255-Up and 94U240-Up
1V3305 Differential parts are shown on Page 52
DIFFERENTIAL GROUP
1V-3305 DIFFERENTIAL GROUP
1V3305 DIFFERENTIAL GROUP
Part of 1V3304 and 1V3303 Differential and Bevel Gear Groups shown on
Pages 50 through 51
FILLER GP-POWER TRAIN OIL
FILLER GP-POWER TRAIN OIL
8K-5018 FILLER GP-POWER TRAIN OIL
8K5018 TRANSMISSION OIL FILLER GROUP
FILTER GP
FILTER GP-TRANSMISSION
2S-6457 FILTER GP-TRANSMISSION
2S6457 TRANSMISSION FILTER GROUP
Part of 9S5223 and 3P9402 Transmission Arrangements
shown on Pages 30, 30A and 30B
GEAR GP
TRANSFER CASE AND GEAR
9S-5224 TRANSFER CASE AND GEAR
TRANSFER CASE AND GEAR (9S5224 N/S)--Part 1 of 2
Serial No. 50S597 to 659, 664 to 667, 814, 815, 818 and 50S820 inclusive
and 55U152 to 55U160 inclusive and 94U1 to 94U84 and 94U89 inclusive. Part of
9S5223 Transmission Arrangement shown on Page 30
See Page 153 for Gasket Kit
9S-5224 TRANSFER CASE AND GEAR
TRANSFER CASE AND GEAR (9S5224 N/S)--Part 2 of 2
Serial No. 50S597 to 659, 664 to 667, 814, 815, 818 and 50S820 inclusive
and 55U152 to 55U160 inclusive and 94U1 to 94U84 and 94U89 inclusive
Part of 9S5223 Transmission Arrangement shown on Page 30
TRANSFER CASE AND GEAR
9S-5224 TRANSFER CASE AND GEAR
TRANSFER CASE AND GEAR (9S5224 N/S)--Part 1 of 2
Serial No. 50S660 to 50S663, 668 to 813, 816, 817, 819 and 50S821 to 50S843
inclusive, 55U161 to 55U189 inclusive and 94U85 to 94U88 and 94U90 to
94U130 inclusive. Part of 9S5223 Transmission Arrangement shown on Page
30. See Page 153 for Gasket Kit
9S-5224 TRANSFER CASE AND GEAR
TRANSFER CASE AND GEAR (9S5224 N/S)--Part 2 of 2
Serial No. 50S660 to 50S663, 668 to 813, 816, 817, 819 and 50S821 to
50S843 inclusive, 55U161 to 55U189 inclusive and 94U85 to 94U88 and
94U90 to 94U130 inclusive. Part of 9S5223 Transmission Arrangement
shown on Page 30
CASE & TRANSFER GEAR GP
3P-9401 CASE & TRANSFER GEAR GP
3P9401 TRANSFER CASE AND GEAR GROUP--Part 1 of 2
Serial No. 50S844 to 1061, 1064 to 1066, 1068 to 1072 and 50S1074 inclusive
55U190 to 55U238 inclusive and 94U131 to 94U174 inclusive. Part of 3P9402
Transmission Arrangement shown on Pages 30A & 30B. See Page 153 for Gasket Kits
3P-9401 CASE & TRANSFER GEAR GP
3P9401 TRANSFER CASE AND GEAR GROUP--Part 2 of 2
Serial No. 50S844 to 1061, 1064 to 1066, 1068 to 1072 and 50S1074 inclusive, 55U190
to 55U238 inclusive and 94U131 to 94U174 inclusive. Part of 3P9402 Transmission
Arrangement shown on Pages 30A and 30B
CASE & TRANSFER GEAR GP
3P-9401 CASE & TRANSFER GEAR GP
3P9401 TRANSFER CASE AND GEAR GROUP--Part 1 of 2
Serial No. 50S1062, 1063, 1067 and 50S1073 inclusive, 55U239 and 55U242 to 55U245
inclusive and 94U175 to 94U180 inclusive. Part of 3P9402 Transmission Arrangement
shown on Page 30B. See Page 153 for Gasket Kits
3P-9401 CASE & TRANSFER GEAR GP
3P9401 TRANSFER CASE AND GEAR GROUP--Part 2 of 2
Serial No. 50S1062, 1063, 1067 and 50S1073 inclusive, 55U239 and 55U242 to 55U245
inclusive and 94U175 to 94U180 inclusive. Part of 3P9402 Transmission Arrangement
shown on Page 30B
CASE & TRANSFER GEAR GP
3P-9401 CASE & TRANSFER GEAR GP
3P9401 TRANSFER CASE AND GEAR GROUP--Part 1 of 2
Serial No. 50S1075-Up, 55U240, 241 and 55U246-Up and 94U181-Up
Part of 3P9402 Transmission Arrangement shown on Page 30B
See Page 153 for Gasket Kits
3P-9401 CASE & TRANSFER GEAR GP
3P9401 TRANSFER CASE AND GEAR GROUP--Part 2 of 2
Serial No. 50S1075-Up, 55U240, 241 and 55U246-Up and 94U181-Up
Part of 3P9402 Transmission Arrangement shown on Page 30B
See Page 153 for Gasket Kits
PUMP GP
TRANSMISSION PUMP GROUP
1P-5279 TRANSMISSION PUMP GROUP
1P5279 TRANSMISSION PUMP GROUP
Serial No. 50S597 to 843, 845 to 977 and 50S979 inclusive, 55U152 to 55U189
and 55U191 to 55U222 inclusive and 94U1 to 94U130 and 94U132 to 94U168
inclusive. Part of 9S5223 and 3P9402 Transmission Arrangements shown
on Pages 30 and 30B
PUMP GP-GEAR
3P-7958 PUMP GP-GEAR
3P7958 TRANSMISSION PUMP GROUP
Serial No. 50S844, 50S978 and 50S980-Up, 55U190 and 55U223-Up and
94U131 and 94U169-Up. Part of 3P9402 Transmission Arrangement
shown on Page 30A
SHAFT GP
JOINT GROUP
7K-8645 JOINT GROUP
7K8645 JOINT GROUP
Part of Drive Shaft shown on Page 48
DRIVE SHAFT GROUP
7K-5382 DRIVE SHAFT GROUP
7K5382 DRIVE SHAFT GROUP
Serial No. 50S597 to 50S1240 inclusive, 55U152 to 55U262 inclusive and 94U1 to 94U254 inclusive
7K8645, 7K5535 and 7K5356 Joint parts are shown on Pages 47, 48B and 49
DRIVE SHAFT GROUP
7K-5382 DRIVE SHAFT GROUP
7K5382 DRIVE SHAFT GROUP
Serial No. 50S1241-Up, 55U263-Up and 94U255-Up
7K8645, 7K5535 and 7K5356 Joint parts are shown on Pages 47, 48B and 49
SLIP JOINT GROUP
7K-5535 SLIP JOINT GROUP
7K5535 SLIP JOINT GROUP--Type 1
Part of 7K5382 Drive Shaft Group shown on Pages 48 and 48A
SLIP JOINT GROUP
7K-5535 SLIP JOINT GROUP
7K5535 SLIP JOINT GROUP--Type 2
Part of 7K5382 Drive Shaft Group shown on Pages 48 and 48A
JOINT GROUP
7K-5356 JOINT GROUP
7K5356 JOINT GROUP
Part of 7K5382 Drive Shaft Group shown on Pages 48 and 48A
SLIP JOINT GROUP
7K-5446 SLIP JOINT GROUP
7K5446 SLIP JOINT GROUP
Part of Winch Drive shown on Page 128
SLIP JOINT GROUP
9K-6056 SLIP JOINT GROUP
9K6056 SLIP JOINT GROUP
Serial No. 50S597 to 50S1240 inclusive, 55U152 to 55U262 inclusive and 94U1 to
94U254 inclusive. Part of 7K5369 Winch Drive Group shown on Page 128
SLIP JOINT GROUP
2V-1153 SLIP JOINT GROUP
2V1153 SLIP JOINT GROUP
Serial No. 50S1241-Up, 55U263-Up and 94U255-Up
Part of 7K5369 Winch Drive Group shown on Page 128A
SLIP JOINT GROUP
7K-5447 SLIP JOINT GROUP
7K5447 SLIP JOINT GROUP
Part of 7K5369 Winch Drive Group shown on Pages 128 and 128A
GUARD GP-DRIVE SHAFT
8K-5273 GUARD GP-DRIVE SHAFT
WINCH DRIVE SHAFT GUARD (8K5273 N/S)
Also part of 8K9694 Hydraulic Arrangement listed on Page 108
GUARD GP-DRIVE SHAFT
9K-6506 GUARD GP-DRIVE SHAFT
WINCH DRIVE SHAFT GUARD (9K6506 N/S)
Serial No. 55U152-Up
TORQUE CONVERTER GP
TORQUE CONVERTER GP
1T-1005 TORQUE CONVERTER GP
1T1005 TORQUE CONVERTER GROUP
Torque Converter Serial No. 53T1-Up
Part of Torque Converter shown on Page 33
TORQUE CONVERTER GROUP
9S-5200 TORQUE CONVERTER GROUP
9S5200 TORQUE CONVERTER GROUP--Part 1 of 2
Part of 9S5223 and 3P9402 Transmission Arrangements shown on Pages 30, 30A & 30B
See Page 153 for Gasket Kits
9S-5200 TORQUE CONVERTER GROUP
9S5200 TORQUE CONVERTER GROUP--Part 2 of 2
Part of 9S5223 and 3P9402 Transmission Arrangements shown on Pages 30, 30A & 30B.
1T1005 Torque Converter parts are shown on Page 31
TRANSMISSION GP
TRANSMISSION ARRANGEMENT
9S-5223 TRANSMISSION ARRANGEMENT
9S5223 TRANSMISSION ARRANGEMENT--Side View
Serial No. 50S597 to 50S843 inclusive, 55U152 to 55U189 inclusive and 94U1 to 94U130 inclusive. Torque Converter,
Transmission Case, Planetary Transmission, Transfer Gear, Transmission Hydraulic Control, 2S6457. Transmission
Filter and 1P5279 Transmission Pump parts are shown on Pages 32, 33, 35, 36, 37, 38, 39, 40, 45 and 46
TRANSMISSION ARRANGEMENT
3P-9402 TRANSMISSION ARRANGEMENT
3P9402 TRANSMISSION ARRANGEMENT--Side View
Serial No. 50S844, 50S978 and 50S980-Up, 55U190 and 55U223-Up and 94U131 and and 94U169-Up. Torque Converter,
Transmission Case, Planetary Transmission, Transfer Case and Gear, Hydraulic Control, 2S6457 Filter and
3P7958 Pump parts are shown on Pages 32, 33, 34A, 35, 36B, 37, 38D, 39, 40A, 40B, 45 and 46A
TRANSMISSION ARRANGEMENT
3P-9402 TRANSMISSION ARRANGEMENT
3P9402 TRANSMISSION ARRANGEMENT--Side View
Serial No. 50S845 to 50S977 and 50S979 inclusive, 55U191 to 55U222 inclusive and 94U132 to 94U168 inclusive
Torque Converter, Transmission Case, Planetary Transmission, Transfer Case and Gear, Hydraulic Control,
2S6457 Filter and 1P5279 Pump parts are shown on Pages 32, 33, 34A, 36B, 37, 38D, 39, 40A, 40B, 45 and 46
CASE & PARTS GP
9S-5225 CASE & PARTS GP
TRANSMISSION CASE (9S5225 N/S)
Serial No. 50S597 to 990, 993, 995, 999, 1001, 1002 and 50S1013 inclusive and 55U152 to 55U227 inclusive
Part of 9S5223 and 3P9402 Transmission Arrangements shown on Pages 30, 30A and 30B
CASE & PARTS GP
9S-5225 CASE & PARTS GP
TRANSMISSION CASE (9S5225 N/S)
Serial No. 50S991, 992, 994, 996 to 998, 1000, 1003 to 1012 and 50S1014-Up and 55U228-Up
Part of 3P9402 Transmission Arrangement shown on Page 30A
PLANETARY GP
9S-5226 PLANETARY GP
PLANETARY TRANSMISSION (9S5226 N/S)--Part 1 of 2
Serial No. 50S597 to 50S843 inclusive, 55U152 to 55U189 inclusive and 94U1 to 94U130 inclusive
Part of 9S5223 Transmission Arrangement shown on Page 30. See Page 153 for Gasket Kit
9S-5226 PLANETARY GP
PLANETARY TRANSMISSION (9S5226 N/S)--Part 2 of 2
Serial No. 50S597 to 50S843 inclusive, 55U152 to 55U189 inclusive and 94U1 to 94U130 inclusive
Part of 9S5223 Transmission Arrangement shown on Page 30
PLANETARY GP
9S-5226 PLANETARY GP
9S5226 PLANETARY TRANSMISSION GROUP--Part 1 of 2
Serial No. 50S844-Up, 55U190-Up and 94U131-Up
Part of 3P9402 Transmission Arrangement shown on Pages 30A and 30B. See Page 153 for Gasket Kit
9S-5226 PLANETARY GP
9S5226 PLANETARY TRANSMISSION GROUP--Part 2 of 2
Serial No. 50S844-Up, 55U190-Up and 94U131-Up
Part of 3P9402 Transmission Arrangement shown on Pages 30A and 30B
TRANSMISSION PUMP GROUP
1P-5279 TRANSMISSION PUMP GROUP
1P5279 TRANSMISSION PUMP GROUP
Serial No. 50S597 to 843, 845 to 977 and 50S979 inclusive, 55U152 to 55U189
and 55U191 to 55U222 inclusive and 94U1 to 94U130 and 94U132 to 94U168
inclusive. Part of 9S5223 and 3P9402 Transmission Arrangements shown
on Pages 30 and 30B
SUPPORT GP-TRANSMISSION
7K-9626 SUPPORT GP-TRANSMISSION
TRANSMISSION SUPPORT (7K9626 N/S)
Serial No. 50S597 to 50S664 inclusive, 55U152 to 55U161
inclusive and 94U1 to 94U87 inclusive
PUMP GP-GEAR
3P-7958 PUMP GP-GEAR
3P7958 TRANSMISSION PUMP GROUP
Serial No. 50S844, 50S978 and 50S980-Up, 55U190 and 55U223-Up and
94U131 and 94U169-Up. Part of 3P9402 Transmission Arrangement
shown on Page 30A
SUPPORT GP-TRANSMISSION
7K-9626 SUPPORT GP-TRANSMISSION
TRANSMISSION SUPPORT (7K9626 N/S)
Serial No. 50S665-Up, 55U162-Up and 94U88-Up
VALVE GP-SELECTOR
VALVE GP-SELECTOR
2P-1056 VALVE GP-SELECTOR
2P1056 SELECTOR VALVE GROUP--Type 1
Part of Transmission Hydraulic Control shown on Pages 40 and 40B
VALVE GP-SELECTOR
2P-1056 VALVE GP-SELECTOR
2P1056 SELECTOR VALVE GROUP--Type 2
Part of Transmission Hydraulic Control shown on Pages 40, 40A and 40B
VALVE GP-TRANSMISSION CONTROL
CONTROL GP-TRANSMISSION HYD
2P-1058 CONTROL GP-TRANSMISSION HYD
TRANSMISSION HYDRAULIC CONTROL (2P1058 N/S)
Serial No. 50S597 to 50S738 inclusive, 55U152 to 55U173 and 55U180 inclusive and 94U1 to 94U108 inclusive
Part of 9S5223 Transmission Arrangement shown on Page 30
2P1055 Pressure Control and 2P1056 Selector Valve parts are shown on Pages 40C, 44 and 44A
CONTROL GP-TRANSMISSION HYD
2P-1058 CONTROL GP-TRANSMISSION HYD
2P1058 TRANSMISSION HYDRAULIC CONTROL GROUP
Serial No. 50S739 to 50S905 inclusive, 55U174 to 55U179 and 55U181 to 55U209 inclusive and 94U109-Up
Part of 9S5223 and 3P9402 Transmission Arrangements shown on Pages 30, 30A and 30B
3P4489 Pressure Control and 2P1056 Selector Valve parts are shown on Pages 40D, 44 and 44A
CONTROL GP-TRANSMISSION HYD
2P-1058 CONTROL GP-TRANSMISSION HYD
2P1058 TRANSMISSION HYDRAULIC CONTROL GROUP
Serial No. 50S906-Up and 55U210-Up. Part of 3P9402 Transmission Arrangement shown on Pages 30A
and 30B. 3P4489 Pressure Control Valve and 2P1056 Selector Valve parts are shown on Pages 40D, 44 and 44A
PRESSURE CONTROL GROUP
2P-1055 PRESSURE CONTROL GROUP
2P1055 PRESSURE CONTROL GROUP
Serial No. 50S597 to 50S738 inclusive, 55U152 to 55U173 and 55U180 inclusive and 94U1 to 94U108 inclusive
Part of Transmission Hydraulic Control shown on Page 40
PRESSURE CONTROL GROUP
3P-4489 PRESSURE CONTROL GROUP
3P4489 PRESSURE CONTROL GROUP--Replaced by 3P4490 shown on Page 41
Serial No. 50S739-Up, 55U174 to 55U179 and 55U181-Up and 94U109-Up
Part of 2P1058 Transmission Hydraulic Control Group shown on Pages 40A & 40B
VALVE GP-HYDRAULIC PRESS CONT
3P-4490 VALVE GP-HYDRAULIC PRESS CONT
3P4490 PRESSURE CONTROL GROUP--Field Installation
Serial No. 50S739-Up, 55U174 to 55U179 and 55U181-Up and 94U109-Up
WHEEL GP
RIM GP-DEMOUNTABLE
1V-3519 RIM GP-DEMOUNTABLE
DEMOUNTABLE RIM (1V3519 N/S)
RIM GP-DEMOUNTABLE
1V-3855 RIM GP-DEMOUNTABLE
1V3855 DEMOUNTABLE RIM GROUP
FOR USE WITH 23.1 x 26 TIRES WITH TUBES
AN ATTACHMENT
RIM GP-DEMOUNTABLE
1V-3517 RIM GP-DEMOUNTABLE
1V3517 DEMOUNTABLE RIM GROUP
FOR USE WITH 28.1 x 26 TIRES WITH TUBES. AN ATTACHMENT
RIM GP-DEMOUNTABLE
1V-3518 RIM GP-DEMOUNTABLE
1V3518 DEMOUNTABLE RIM GROUP
FOR USE WITH 23.1 x 26 TIRES WITH TUBES. AN ATTACHMENT
DEMOUNTABLE RIM GROUP
1V-3858 DEMOUNTABLE RIM GROUP
1V3858 DEMOUNTABLE RIM GROUP
FOR USE WITH 18.4 x 34 TIRES WITH TUBES. AN ATTACHMENT
COOLER GP
LINES GP-TORQUE CONV COOLER
8K-5366 LINES GP-TORQUE CONV COOLER
TORQUE CONVERTER COOLER LINES (8K5366 N/S)

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Specifications
Rear Axle Housing
518 SKIDDER POWER TRAIN
Wheel Bearing Adjustment
518 SKIDDER POWER TRAIN
Final Drive And Wheels
518 SKIDDER POWER TRAIN
Final Drives
518 SKIDDER POWER TRAIN SPECIFICATIONS
Wheel Bearing Adjustment
518 SKIDDER POWER TRAIN SPECIFICATIONS
Front And Rear Axle Group<BR> 8V0759, 6W9566
518 SKIDDER POWER TRAIN SPECIFICATIONS
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Wheels And Wheel Spindles
518 SKIDDER POWER TRAIN
Axles
518 SKIDDER POWER TRAIN
Front Wheel Brakes
518 SKIDDER POWER TRAIN
Final Drives
518 SKIDDER POWER TRAIN
Front Axle Housing
518 SKIDDER POWER TRAIN
Rear Axle Housing
518 SKIDDER POWER TRAIN
Duo-Cone Seals
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Wheels &amp; Wheel Spindles
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Axles
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Front Wheel Brake
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Final Drives
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Front Axle Housing
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Rear Axle Housing
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Drive Line Brake
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Drive Line Brake Disc
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Parking Brake
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Service Magazine
Prevent Damage To Brake Lining Before And During Installation{4254,4001}
1983/07/04
Use Different Bearing For The Final Drive Planet Gears To Prevent Failure In High Torque Applications{4051,4055}
1983/10/31
Change To Lubricant Recommendations For Differential And Final Drives{3258,4070}
1984/02/20
Use Caution When Modifying Skidders For Use As Compactors{4051}
1986/11/10
New Thrust Washers Used In Sun Gear Of Final Drives{4050}
1988/08/08
Improved Retention Of Brake Disc To Wheel{4201,4255}
1988/12/05
Increased Tooth Width Strengthens Final Drive Gears And Reduces Case Loading{4055,3186,7551,7552}
1990/11/26
1U9891 Hydraulic Oil Additive Eliminates Noise From Final Drives{3263,3258,4055,4084,4091}
1992/08/17
Be Sure To Clean Axle Housing Completely After Final Drive Or Differential Failure {3260,3280,4051}
1993/01/18
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Technical Information Bulletin
3V-0197 BOLTS MAY NOT HAVE THE PROPER HEAT TREATMENT
3V-0197 BOLTS MAY NOT HAVE THE PROPER HEAT TREATMENT
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Hydraulic Controls For The Transmission<BR> (2P1058)
518 SKIDDER POWER TRAIN
Pressure Control Valve<BR> (2P1055)
518 SKIDDER POWER TRAIN
Hydraulic Controls For The Transmission
518 SKIDDER POWER TRAIN SPECIFICATIONS
Pressure Control Valve
518 SKIDDER POWER TRAIN SPECIFICATIONS
Bench Test Procedures
Bench Test Procedure For a 518 Wheel Skidder Transmission {3030, 3073}
Bench Test Procedure For a 518 Wheel Skidder Transmission {3030, 3073}
Disassembly and Assembly
Transmission Hydraulic Control Valves
518 SKIDDER POWER TRAIN
Transmission Hydraulic Control Valves
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Service Magazine
New Transmission Valve Groups Increase Winch Line Pull When Transmission Is In Neutral{3150,3152,3157,3167,3100}
1978/02/20
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Specifications
Differential And Bevel Gear Adjustment
518 SKIDDER POWER TRAIN
Differential And Bevel Gear<BR> 1V3303, 1V3304, 6W9613, 6W9614
518 SKIDDER POWER TRAIN SPECIFICATIONS
NoSPIN Differential Group
518 SKIDDER POWER TRAIN SPECIFICATIONS
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Torque Proportioning Differential
TORQUE PROPORTIONING DIFFERENTIAL DISASSEMBLY & ASSEMBLY
Front Differential
518 SKIDDER POWER TRAIN
Front And Rear Differentials
518 SKIDDER POWER TRAIN
Bevel Gear And Shaft Assembly
518 WINCH
Front Differential
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Front &amp; Rear Differentials
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Service Magazine
Change To Lubricant Recommendations For Differential And Final Drives{3258,4070}
1984/02/20
Stronger Ring Gear And Pinion Gear Available{3254,3280}
1986/11/24
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
1U9891 Hydraulic Oil Additive Eliminates Noise From Final Drives{3263,3258,4055,4084,4091}
1992/08/17
Be Sure To Clean Axle Housing Completely After Final Drive Or Differential Failure {3260,3280,4051}
1993/01/18
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Specifications
Flexible Coupling Drive
3304 VEHICULAR ENGINE
Checking And Adjusting Alignment Of The Flexible Coupling Drive
3304 VEHICULAR ENGINE
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Disassembly and Assembly
Transfer Gears
518 SKIDDER POWER TRAIN
Service Magazine
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Specifications
Oil Filter For The Transmission<BR> (2S6457)
518 SKIDDER POWER TRAIN
Oil Filter For The Transmission
518 SKIDDER POWER TRAIN SPECIFICATIONS
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Transmission Oil Filter Group
518 SKIDDER POWER TRAIN
Transmission Oil Filter Group
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Specifications
Transfer Gears<BR> (9S5224)
518 SKIDDER POWER TRAIN
Transfer Gears
518 SKIDDER POWER TRAIN SPECIFICATIONS
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Disassembly and Assembly
Transfer Gears
518 SKIDDER POWER TRAIN
Transfer Gears
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Service Magazine
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Installation Of 8V5799 Parking Brake Group{4282}
Installation Of 8V5799 Parking Brake Group{4282}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Transfer Gears<BR> (9S5224)
518 SKIDDER POWER TRAIN
Transmission Oil Pump<BR> (1P2579)
518 SKIDDER POWER TRAIN
Oil Filter For The Transmission<BR> (2S6457)
518 SKIDDER POWER TRAIN
Pressure Control Valve<BR> (2P1055)
518 SKIDDER POWER TRAIN
Rear Axle Housing
518 SKIDDER POWER TRAIN
Wheel Bearing Adjustment
518 SKIDDER POWER TRAIN
Final Drive And Wheels
518 SKIDDER POWER TRAIN
Transfer Gears
518 SKIDDER POWER TRAIN SPECIFICATIONS
Transmission Oil Pump
518 SKIDDER POWER TRAIN SPECIFICATIONS
Oil Filter For The Transmission
518 SKIDDER POWER TRAIN SPECIFICATIONS
Pressure Control Valve
518 SKIDDER POWER TRAIN SPECIFICATIONS
NoSPIN Differential Group
518 SKIDDER POWER TRAIN SPECIFICATIONS
Final Drives
518 SKIDDER POWER TRAIN SPECIFICATIONS
Wheel Bearing Adjustment
518 SKIDDER POWER TRAIN SPECIFICATIONS
Driveline Service And Parking Brake Group
518 SKIDDER POWER TRAIN SPECIFICATIONS
Front And Rear Axle Group<BR> 8V0759, 6W9566
518 SKIDDER POWER TRAIN SPECIFICATIONS
Priority Valve Group<BR> 7T5052
518 SKIDDER WINCH
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Tires And Rims
518 SKIDDER POWER TRAIN
Wheels And Wheel Spindles
518 SKIDDER POWER TRAIN
Axles
518 SKIDDER POWER TRAIN
Front Wheel Brakes
518 SKIDDER POWER TRAIN
Final Drives
518 SKIDDER POWER TRAIN
Front Axle Housing
518 SKIDDER POWER TRAIN
Rear Axle Housing
518 SKIDDER POWER TRAIN
Parking Brake
518 SKIDDER POWER TRAIN
Transmission Hydraulic Control Valves
518 SKIDDER POWER TRAIN
Transmission Oil Pump
518 SKIDDER POWER TRAIN
Transfer Gears
518 SKIDDER POWER TRAIN
Transmission Oil Filter Group
518 SKIDDER POWER TRAIN
Service Magazine
Prevent Damage To Brake Lining Before And During Installation{4254,4001}
1983/07/04
Use Different Bearing For The Final Drive Planet Gears To Prevent Failure In High Torque Applications{4051,4055}
1983/10/31
Change To Lubricant Recommendations For Differential And Final Drives{3258,4070}
1984/02/20
Brake Valve Repair Kit Available{4250,4265}
1985/08/19
New Engine Mount Keeps Forces Caused From Engine Side-To-Side Movement Away From The Frame Of The Vehicle{1152}
1977/03/21
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Lining Wear Caused By Wrong Application Of Parking Brake{4267}
1977/05/30
New Clutch Discs In Speed Clutches Of Power Shift Transmissions{3155}
1978/04/24
Repair of Stator Assembly With Damaged Bearing Contact Face{3101,3129}
1988/06/27
New Thrust Washers Used In Sun Gear Of Final Drives{4050}
1988/08/08
Improved Retention Of Brake Disc To Wheel{4201,4255}
1988/12/05
New Rotating Housing Used In Torque Converters{3105}
1989/10/23
Increased Tooth Width Strengthens Final Drive Gears And Reduces Case Loading{4055,3186,7551,7552}
1990/11/26
1U9891 Hydraulic Oil Additive Eliminates Noise From Final Drives{3263,3258,4055,4084,4091}
1992/08/17
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Transmission Oil Pump<BR> (1P2579)
518 SKIDDER POWER TRAIN
Transmission Oil Pump
518 SKIDDER POWER TRAIN SPECIFICATIONS
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Transmission Oil Pump
518 SKIDDER POWER TRAIN
Transmission Oil Pump
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2009/01/26
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Specifications
Drive Shaft
518 SKIDDER POWER TRAIN
Drive Shaft Group
518 SKIDDER POWER TRAIN SPECIFICATIONS
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Disassembly and Assembly
Accessory Drive Housing And Shaft
3304 VEHICULAR ENGINE FOR 518 SKIDDERS
Drive Shafts
518 SKIDDER POWER TRAIN
Drive Shafts
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Service Magazine
New Drive Shaft Group Has Universal Joints Of A Different Design{3251,3252,3267}
1980/11/10
Drive Shaft Group Improved{3253,3251}
1986/09/22
Drive Line Guard Prevents Possible Fuel Tank Damage{1273,3250,3253}
1977/09/12
Lubricate Main Drive Shaft U-Joint Every 250 Service Meter Hours or One Month {3251}
1989/10/09
Machine Articulation Changed To Improve Driveline Life; Procedure To Add Spacers To Steering Stop Blocks {7188,3251,7051}
1994/01/24
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Special Instruction
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Special Instruction
Installation of Torque Converter Sleeve Bearings{3135}
Installation of Torque Converter Sleeve Bearings{3135}
Specifications
Torque Converter<BR> (1T1005)
518 SKIDDER POWER TRAIN
Torque Converter Group
518 SKIDDER POWER TRAIN
Torque Converter
518 SKIDDER POWER TRAIN SPECIFICATIONS
Torque Converter Group<BR> 9G0926, 6T1511
518 SKIDDER POWER TRAIN SPECIFICATIONS
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Repair of Torque Converter Stator Wheels {3101, 3129}
Repair of Torque Converter Stator Wheels {3101, 3129}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Splined Shaft{0679, 3101}
Thermal Spray Procedures for Splined Shaft{0679, 3101}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Torque Converter
518 SKIDDER POWER TRAIN
Torque Converter
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Service Magazine
Harder Lock Plate Used For Bolts In Torque Converter{3101,3108}
1982/11/08
New Torque Converter Group Has Stronger Joint Between Impeller And Pump Drive Gear {3101}
1984/06/25
Repair of Stator Assembly With Damaged Bearing Contact Face{3101,3129}
1988/06/27
New Retainer Used Between Bolt And Gear In The Torque Converter{3101}
1979/04/23
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
New Rotating Housing Used In Torque Converters{3105}
1989/10/23
Remove Burrs On Bearing Retaining Ring In Torque Converter {3127,3101,3105}
1990/03/26
Improvements Help Prevent Loosening Of Torque Converter Output Gear{3101}
1990/06/18
Improved Torque Converter Stator Carriers Increase Output Shaft Bearing Service Life {3101,3130,3135}
1997/11/17
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2013/03/21
Reuse And Salvage Guidelines
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
2013/03/21
Special Instruction
Installation Of Transmission Mounting Brackets{3176}
Installation Of Transmission Mounting Brackets{3176}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Specifications
Transmission<BR> (9S5226)
518 SKIDDER POWER TRAIN
Transmission Oil Pump<BR> (1P2579)
518 SKIDDER POWER TRAIN
Planetary Transmission<BR> 9S5226 (earlier); 8P8277 (later)
518 SKIDDER POWER TRAIN SPECIFICATIONS
Transmission Oil Pump
518 SKIDDER POWER TRAIN SPECIFICATIONS
Engine Mounting Bolts
3304 VEHICULAR ENGINE
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Bench Test Procedures
Bench Test Procedure For a 518 Wheel Skidder Transmission {3030, 3073}
Bench Test Procedure For a 518 Wheel Skidder Transmission {3030, 3073}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission
518 SKIDDER POWER TRAIN
Transmission Oil Pump
518 SKIDDER POWER TRAIN
Engine &amp; Transmission
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Transmission
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Service Magazine
New Engine Mount Keeps Forces Caused From Engine Side-To-Side Movement Away From The Frame Of The Vehicle{1152}
1977/03/21
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
New Clutch Discs In Speed Clutches Of Power Shift Transmissions{3155}
1978/04/24
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Disassembly and Assembly
Transmission Hydraulic Control Valves
518 SKIDDER POWER TRAIN
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Specifications
Priority Valve Group<BR> 7T5052
518 SKIDDER WINCH
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Specifications
Hydraulic Controls For The Transmission<BR> (2P1058)
518 SKIDDER POWER TRAIN
Pressure Control Valve<BR> (2P1055)
518 SKIDDER POWER TRAIN
Hydraulic Controls For The Transmission
518 SKIDDER POWER TRAIN SPECIFICATIONS
Pressure Control Valve
518 SKIDDER POWER TRAIN SPECIFICATIONS
Bench Test Procedures
Bench Test Procedure For a 518 Wheel Skidder Transmission {3030, 3073}
Bench Test Procedure For a 518 Wheel Skidder Transmission {3030, 3073}
Disassembly and Assembly
Transmission Hydraulic Control Valves
518 SKIDDER POWER TRAIN
Transmission Hydraulic Control Valves
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Service Magazine
New Transmission Valve Groups Increase Winch Line Pull When Transmission Is In Neutral{3150,3152,3157,3167,3100}
1978/02/20
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Specifications
Rim group
518 SKIDDER POWER TRAIN SPECIFICATIONS
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Disassembly and Assembly
Tires And Rims
518 SKIDDER POWER TRAIN
Tires &amp; Rims
518 SERIES II LOG SKIDDER AND GRAPPLE SKIDDER POWER TRAIN
Service Magazine
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Disassembly and Assembly
Transmission Oil Cooler
3304 VEHICULAR ENGINE FOR 518 SKIDDERS
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Truck sale:

 
 
Caterpillar 518, Forestry Equipment
- skidder
CARTER MACHINERY COMPANY, INC.
 
 
Caterpillar 518, Forestry Equipment
- skidder
CARTER MACHINERY COMPANY, INC.
Caterpillar 518, Forestry Equipment
4,951 
Caterpillar 518, Forestry Equipment
- skidder
FINNING CANADA
Canada
Caterpillar 518, Forestry Equipment
24,500 
Caterpillar 518, Forestry Equipment
- skidder
MILTON CAT
Caterpillar 518SA, Forestry Equipment
24,000 
Caterpillar 518SA, Forestry Equipment
- skidder
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.