AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

CYLINDER HEAD (4N749 N/S) Part of 4N2260 Cylinder Head Group shown on Page 23 3406 MARINE ENGINE


BASIC ENGINE
CYLINDER HEAD GP
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS
BASIC ENGINE
VALVE MECHANISM GP
LIFTING GP-ENGINE
GEAR GP
HOUSING GP-FRONT

MARINE ENGINE 3406 MARINE ENGINE 91U
 3406 MARINE ENGINE 91U00001-00122 UEG0747S 3406 91U   (1975)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
4N-2260 CYLINDER HEAD GP
CYLINDER HEAD
4N-0749 CYLINDER HEAD
 

#UEG0747S0020
 

4N-0749: CYLINDER HEAD

CYLINDER HEAD (4N749 N/S)
Part of 4N2260 Cylinder Head Group shown on Page 23
c150840 UEG0747S
4N0749 CYLINDER HEAD Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-5906 [24] SPRING  
2. 2N-5571 C [24] ROTOCOIL  
3. 2A-4429 [48] LOCK  
4. 4N-5079 [1] HEAD ASSEM.  
5. 2N-5775 [12] DOWEL  
6. 4N-5893 [12] INSERT  
  4S-8898 H [12] INSERT .005 in. (.13mm)oversize  
  4S-8899 H [12] INSERT .010 in. (.26mm)oversize  
7. 2M-6471 [1] PLUG  
8. 9S-9699 [12] INSERT  
  4S-8902 H [12] INSERT .005 in. (.13mm)oversize  
  4S-8903 H [12] INSERT .010 in. (.26mm)oversize  
9. 3B-0623 [10] PLUG  
10. 4N-2803 [24] GUIDE  
11. 3B-0645 [12] PLUG  
12. 4N-5654 [12] VALVE (intake)  
13. 4N-5653 [12] VALVE (exhaust)  
  C   INDICATES CHANGE
  H   NOT PART OF 4N5079 ASSEM.
 

#UEG0747S0021
 

7N-0628: GASKET GROUP

7N628 GASKET GROUP--Field Installation
Eliminates Oil Transfer from Rocker Arm Oil Supply Holes to Water Jacket Areas
Note: 7N624 Block Plate is available
UEG0747S0021 UEG0747S
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7N-0623 [6] SEAL CYLINDER LINER  
  7N-0631 [1] GASKET CYLINDER BLOCK PLATE  
  7N-0632 [1] GASKET CYLINDER BLOCK TO CYLINDER HEAD  
 

#UEG0747S0022
 

4N-2271: VALVE MECHANISM GP

4N2271 VALVE MECHANISM GROUP
c208835 UEG0747S
4N2271 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1045 CY [2] ROCKER ARM GROUP  
    (Separate Illustration)
2. 4N-5611 C [6] BRIDGE ASSEM. (exhaust)  
    (Each Includes)
3. 2N-5842 [1] SCREW  
  9L-7712 [1] NUT  
4. 2P-9845 [6] BOLT  
  5H-1504 [6] WASHER  
5. 4N-5609 [12] ROD  
6. 6N-6872 C [12] SPRING  
7. 6N-4589 RC [12] LIFTER ASSEM.  
8. 4N-5612 C [6] BRIDGE ASSEM. (intake)  
    (Each Includes)
9. 2N-5842 [1] SCREW  
  9L-7712 [1] NUT  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0747S0023
 

4N-1045: ROCKER ARM GP

4N1045 ROCKER ARM GROUP
Part of 4N2271 Valve Mechanism Group
c214020 UEG0747S
4N1045 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 006-7403 [1] RETAINER  
2. 2N-7228 [4] WASHER  
3. 4N-0955 [2] PIN  
4. 2N-7229 [2] SPRING  
5. 4N-0839 [1] SHAFT ASSEM.  
6. 5B-1866 [2] PLUG  
7. 4N-0833 [3] BRACKET  
8. 4N-5614 [6] ARM ASSEM.  
9. 9L-7712 [6] NUT  
10. 1A-2935 [6] SCREW  
 

#UEG0747S0024
 

4N-2272: COVER GP-VALVE MECHANISM

4N2272 VALVE MECHANISM COVER GROUP
c218393 UEG0747S
4N2272 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-8925 C [26] BOLT  
2. 4N-4536 [1] COVER-ROCKER ARM  
3. 5P-3218 BC SEAL 5.79M(228IN)  
4. 4N-4537 [1] COVER-ROCKER ARM  
5. 4N-4535 [2] BASE-ARM COVER  
6. 6N-2985 C [1] CAP AS-FILLER  
7. 4N-0851 [2] ADAPTER  
8. 2H-3755 [1] BOLT  
  9M-1974 C [1] WASHER  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0747S0025
 

4N-1331: LIFTING GP

4N1331 LIFTING EYE GROUP
c149051 UEG0747S
4N1331 LIFTING GP Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4308 [1] EYE-LIFTING (FRONT)  
2. 4N-5186 [1] EYE-LIFTING (REAR)  
3. 0S-1594 C [8] BOLT  
4. 0S-1595 C [4] BOLT  
5. 2M-0849 C [4] WASHER  
6. 5M-2894 C [8] WASHER  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0747S0026
 

4N-3911: HOUSING GP-FRONT

4N3911 FRONT HOUSING GROUP
Serial No. 91U95-Up
c218405 UEG0747S
4N3911 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0T-0055 C [2] BOLT  
2. 0L-1352 C [3] BOLT  
3. 4N-3916 [1] GASKET  
4. 0S-1594 C [7] BOLT  
5. 4N-3914 [1] PLATE  
6. 6N-0389 [1] STUD  
  4H-6145 [1] GASKET  
7. 1A-2029 C [4] BOLT  
8. 4N-0867 [1] GASKET  
9. 1D-4717 C [1] NUT  
10. 4N-3913 [1] HOUSING ASSEM.  
11. 5M-6214 [1] PLUG  
12. 6F-7012 C [10] STUD  
13. 8S-9191 C [1] BOLT  
14. 5M-2894 C [18] WASHER  
  C   INDICATES CHANGE
 

#UEG0747S0027
 

4N-3911: HOUSING GP-FRONT

4N3911 FRONT HOUSING GROUP
Serial No. 91U1 to 91U94 inclusive. Part of 4N2239 Basic Engine Arrangement
listed on Page 12. Only separate parts serviced
c147182 UEG0747S
4N3911 HOUSING GP-FRONT Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-3212 [3] BOLT  
2. 2P-3210 [3] BOLT  
3. 4N-3916 [1] GASKET  
4. 2P-3200 [7] BOLT  
5. 4N-3914 C [1] PLATE  
6. 6N-0389 C [1] STUD  
  4H-6145 [1] GASKET  
7. 2P-3202 [4] BOLT  
8. 4N-0867 [1] GASKET  
9. 2P-3261 [1] NUT  
10. 4N-3913 [1] HOUSING ASSEM.  
11. 5M-6214 [1] PLUG  
12. 6F-7012 [2] STUD  
13. 0S-0699 [8] STUD  
14. 4B-4278 C [6] WASHER  
  C   INDICATES CHANGE
 

#UEG0747S0028
 

4N-6006: FASTENER GP-FRONT HOUSING

4N6006 FRONT HOUSING FASTENER GROUP
Part of 4N2239 Basic Engine Arrangement listed on Page 12
Only separate parts serviced
c148695 UEG0747S
4N6006 FASTENER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1A-2029 C [4] BOLT  
  5M-2894 C [4] WASHER  
2. 4N-4107 [1] PLATE  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0747S0029
 

4N-5691: COVER GP-FRONT HOUSING

4N5691 FRONT COVER GROUP
Serial No. 91U1 to 91U80 inclusive
Part of 4N2239 Basic Engine Arrangement listed on Page 12
c201072 UEG0747S
4N5691 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-3213 [7] BOLT  
2. 4N-0273 [1] COVER  
  4N-0274 [1] GASKET  
3. 2P-3201 [3] BOLT  
4. 3B-4506 [5] LOCKWASHER  
5. 6D-2675 C [2] STUD  
6. 1D-4719 [3] NUT  
  2M-0849 [3] WASHER  
7. 9L-0758 [1] COVER  
  9L-1633 [1] GASKET  
8. 5S-2184 [2] SCREW  
9. 2P-3261 [10] NUT  
10. 4B-4278 [8] WASHER  
11. 4N-3990 [1] COVER  
  4N-3989 [1] GASKET  
12. 0S-1587 [2] BOLT  
13. 2P-3204 [2] BOLT  
14. 4N-5250 [1] COVER  
15. 4N-3854 [1] GASKET  
  C   INDICATES CHANGE
 

Information:

Engine News
Service Manual Information About Inside Diameters Of Valve Guides
1981/10/21
New Fuel Nozzle Adapter Assembly Used
1982/02/24
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1982/04/07
Carbon Build-Up In Combustion And Inlet Areas
1982/04/07
Improved Inlet And Exhaust Valves
1982/09/22
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter
1982/10/20
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1983/01/19
Use Caution During Replacement Of Damaged Nozzle Adapters Or Precombustion Chambers
1983/01/19
Engine Valve Stem "Use Again" Specifications
1983/03/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/10/26
New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/30
New Cylinder Head Assembly Made With A Different Material
1984/02/22
New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position
1984/04/11
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/16
Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/07/11
New Inlet Valves Used In Cylinder Heads
1984/09/12
New High Alloy Material Is Used In Cylinder Head Assemblies
1984/10/24
A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures" Is Available
1985/03/01
Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01
Determining The Cause Of Glow Plug Tip Failures
1986/06/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Change To Interval For Valve Lash Adjustment
1987/02/01
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts
1987/04/01
Silicone Rubber Water Seals Available
1987/07/01
High Alloy Cylinder Head Improved
1987/07/01
Improved Valve Mechanism Cover Groups
1988/01/01
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips
1989/08/01
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary
1990/05/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/01
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
New Intake And Exhaust Valves Used {1105,1100}
1994/06/01
New Rocker Arm Adjustment Screw Used To Adjust Valve Clearance {1123,1100}
1994/06/01
New Valve Lifter Assembly Provides Improved Lubrication Of Lifter Roller And Camshaft Lobes {1209,1210}
1994/06/01
New And Reconditioned Valve Projection Specifications{1105}
1995/09/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01
Improved Exhaust Valve Now Available
1977/03/15
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed
1977/07/13
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Special Instruction
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Valves
3406 INDUSTRIAL & MARINE ENGINES
Cylinder Head
3406 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
PRODUCT LINE ADDITIONS: REMANUFACTURED SHORT AND LONG BLOCKS FOR VARIOUS APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Precombustion Chambers
3406 INDUSTRIAL & MARINE ENGINES
Cylinder Head
3406 INDUSTRIAL & MARINE ENGINES
Valves
3406 INDUSTRIAL & MARINE ENGINES
Valve Seat Inserts
3406 INDUSTRIAL & MARINE ENGINES
Bridge Dowels, Valve Guides
3406 INDUSTRIAL & MARINE ENGINES
Valve Guides
3406 INDUSTRIAL & MARINE ENGINES
Service Magazine
Use The Correct Water Temperature Contactor{1350,1100}
1980/02/11
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
Service Manual Information About Inside Diameters Of Valve Guides{1104,0374}
1981/10/05
New Fuel Nozzle Adapter Assembly Used{1106}
1982/02/15
Reconditioning of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1100}
1982/03/08
Carbon Build-Up In Combustion And Inlet Areas{1058,1101,1105,1214,1104}
1982/03/22
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Improved Inlet And Exhaust Valves{1105}
1982/09/06
New Instruction Card Available For 6V87 Valve Stem Gauge{0653}
1982/09/06
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Engine Valve Stem "Use Again" Specifications{0653,1105}
1983/02/28
New Liner Seat Insert Available{1217}
1983/08/15
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
New Cylinder Head Assembly Made With A Different Material {1101}
1984/02/06
New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position{1106,1252}
1984/04/09
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Surface Grinding Of Compacted Graphite Iron Cylinder Heads{1101}
1984/07/02
New Inlet Valve Used{1105}
1984/09/03
New High Alloy Material Is Used In Cylinder Head Assemblies{1101}
1984/10/15
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
Adjust Bridge Whenever Valve Clearance Adjustments Are Made{1121,1105,1100}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Avoid Oil Contact With New Water Passage Seals Used In Cylinder Head Groups{1100}
1986/12/15
Same Valve Camshaft Assembly Used On Direct Injection Engines Now Used On Engines That Have Precombustion Chambers{1210}
1977/01/24
Improved Exhaust Valve Now Available{1105}
1977/02/28
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Clean Bolt Holes In Cylinder Block Before Cylinder Heads Are Installed{1101,1201}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Remanufactured Cylinder Heads For 3406 Engines{1100}
1987/03/16
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Silicone Rubber Water Seals Available{1100}
1987/07/06
High Alloy Cylinder Head Improved{1101}
1987/07/06
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Additional Information For Checking Valve Camshaft Timing{1105,1110,1112,1121}
1989/12/11
Reconditioning Of Bridge Wear Seat Is Permitted; Will Prevent Bridge Replacement When Not Necessary{1121}
1990/04/30
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08

Caterpillar Parts SIS Catalog 3406 :

CYLINDER HEAD GP
4N-2260 CYLINDER HEAD GP
CAMSHAFT ASSEMBLY
4N-6598 CAMSHAFT ASSEMBLY
CAMSHAFT GROUP
4N-0961 CAMSHAFT GROUP
CRANKSHAFT ASSEMBLY
4N-0928 CRANKSHAFT ASSEMBLY
PISTON & ROD GP
4N-0758 PISTON & ROD GP
CRANKSHAFT ASSEMBLY
4N-0928 CRANKSHAFT ASSEMBLY
CRANKSHAFT GP
4N-0741 CRANKSHAFT GP
COVER GP-CYLINDER BLOCK
9N-0015 COVER GP-CYLINDER BLOCK
7N-0628 GASKET GROUP
VALVE MECHANISM GP
4N-2271 VALVE MECHANISM GP
ROCKER ARM GP
4N-1045 ROCKER ARM GP
COVER GP-VALVE MECHANISM
4N-2272 COVER GP-VALVE MECHANISM
LIFTING GP
4N-1331 LIFTING GP
HOUSING GP-FRONT
4N-3911 HOUSING GP-FRONT
HOUSING GP-FRONT
4N-3911 HOUSING GP-FRONT
FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING

Truck sale:

Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
32.000 
Caterpillar 3406-365, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
FINNING CHILE S.A.
 
41.565 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


 
55.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.