AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N8008 GOVERNOR AND FUEL PUMP DRIVE GROUP Serial No. 91U68-Up 3406 MARINE ENGINE


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL INJECTION
TORQUE CONTROL GP
GOVERNOR GP

MARINE ENGINE 3406 MARINE ENGINE 91U
 3406 MARINE ENGINE 91U00001-00122 UEG0747S 3406 91U   (1975)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR AND FUEL PUMP DRIVE GROUP
4N-3950 GOVERNOR AND FUEL PUMP DRIVE GROUP
DRIVE GP-GOVERNOR & FUEL PUMP
4N-8008 DRIVE GP-GOVERNOR & FUEL PUMP
GOV & FUEL INJ PUMP GP
4N-4145 GOV & FUEL INJ PUMP GP
GOVERNOR GROUP
4N-3382 GOVERNOR GROUP
GOVERNOR GROUP
4N-3382 GOVERNOR GROUP
 

#UEG0747S0120
 

4N-8008: DRIVE GP-GOVERNOR & FUEL PUMP

4N8008 GOVERNOR AND FUEL PUMP DRIVE GROUP
Serial No. 91U68-Up
c217206 UEG0747S
4N8008 DRIVE GP-GOVERNOR & FUEL PUMP Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0582 [2] WEIGHT  
2. 4N-0577 [2] SPRING  
3. 7N-5576 C [2] SPRING  
4. 7N-5579 C [1] GEAR ASSEM. (64 Teeth)  
5. 6N-0493 [1] RING  
6. 4N-5230 [1] GASKET  
7. 6H-3957 [1] BEARING  
8. 1T-0033 [1] RING  
9. 6N-0491 [1] SHAFT  
10. 4N-3936 [1] HOUSING ASSEM.  
11. 4N-0684 [2] PIN  
12. 4N-4551 [1] SHAFT ASSEM. (11 Teeth)  
  6L-4081 [1] BEARING  
  6L-4082 [2] RACE  
13. 4N-3934 [1] ADAPTER  
  4N-3933 [1] GASKET  
14. 1B-7182 [2] BOLT  
  9M-1974 [2] WASHER  
15. 2N-7013 [1] STOP  
16. 8H-9788 [2] GASKET  
17. 2N-7014 [1] SPACER  
18. 0S-1588 [6] BOLT 3.18 cm(1.25 in.) long  
19. 0S-1571 [1] BOLT 4.45 cm(1.75 in.) long  
20. 5M-2894 [7] WASHER  
21. 4N-0813 [1] GASKET  
22. 0S-1591 [2] BOLT  
23. 5H-7370 [1] SEAL  
24. 4N-5232 [1] RETAINER  
25. 4N-0580 [2] SLIDE  
26. 6N-0495 [1] FLANGE ASSEM.  
27. 6N-3927 C [1] RETAINER  
28. 5J-5793 [4] BOLT  
29. 4N-4248 C [1] SEAL  
  C   INDICATES CHANGE
 

#UEG0747S0121
 

4N-4145: GOV & FUEL INJ PUMP GP

4N4145 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 4N2239 Basic Engine Arrangement listed on Page 13
4N817 Fuel Injection Pump, Governor Torque Control and 4N3382 Governor parts are shown on pages 76, 77, 78 and 79
c205302 UEG0747S
4N4145 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0817 Y [1] PUMP GROUP  
    (Separate Illustration)
2. 9S-4182 [1] PLUG  
  3J-7354 [1] SEAL  
3. 5J-5314 C [1] BOLT  
4. 0S-1618 [2] BOLT  
5. 4N-3382 Y [1] GOVERNOR GROUP  
    (Separate Illustration)
6. 4N-4267 YC [1] TORQUE CONTROL  
    (Separate Illustration)
7. 2N-0828 [2] WASHER (wave)  
  2P-9556 [1] WASHER (plain)  
8. 9L-6449 [1] SPRING  
9. 1H-5514 C [3] BOLT  
10. 4N-3818 [1] GASKET  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0747S0122
 

4N-0817: FUEL INJECTION PUMP GROUP

4N817 FUEL INJECTION PUMP GROUP--Type 1
Part of 4N4145 Governor & Fuel Injection Pump Group shown on Page 75
c154660 UEG0747S
4N0817 FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-1077 [6] SEAL  
2. 2M-4314 [6] BUSHING  
3. 8H-9204 [6] WASHER  
4. 4N-2484 [6] BONNET  
5. 2S-1631 [6] VALVE  
6. 1S-8634 [6] SPRING  
7. 1M-3506 [6] RING  
8. 4N-4997 [6] PLUNGER AND BARREL ASSEM.  
9. 5M-2697 [6] SPACER .1700 in. (4.32 mm) thick  
  2M-4208 [6] SPACER .1740 in. (4.42 mm) thick  
  2M-4209 [6] SPACER .1780 in. (4.52 mm) thick  
  2M-4210 C [6] SPACER .1820 in. (4.62 mm) thick  
  2M-4211 [6] SPACER .1860 in. (4.72 mm) thick  
  2M-4212 [6] SPACER .1900 in. (4.83 mm) thick  
  5M-2691 [6] SPACER .1940 in. (4.93 mm) thick  
  5S-7189 [6] SPACER .1980 in. (5.03 mm) thick  
10. 1S-7592 [6] SPRING  
11. 8S-3652 [6] WASHER  
12. 3S-9736 [6] LIFTER ASSEM.  
13. 0S-1618 [6] BOLT  
14. 7F-8036 [1] LOCK  
  9M-1974 C [2] WASHER  
  6N-1172 C [2] SLEEVE  
15. 4N-0631 [1] GEAR ASSEM.  
  [1] GEAR (72 teeth)  
16. 4N-2483 [1] SPRING  
17. 4N-4051 [1] YOKE  
18. 6D-9953 [2] PIN (spring)  
19. 4N-0627 [1] PIN  
20. 4N-0818 [1] CAMSHAFT ASSEM.  
21. 9S-8584 [1] DOWEL  
22. 4N-0812 [1] HOUSING ASSEM.  
23. 4B-9782 [1] BALL  
24. 4N-0811 [3] PIN  
25. 9S-4160 [1] BEARING  
26. 5M-6214 [3] PLUG  
27. 1P-0232 [6] BALL  
  1P-0234 [6] DOWEL  
28. 1S-7101 [2] BEARING  
29. 9F-2247 [1] PLUG  
30. 9S-6734 [2] DOWEL  
31. 1S-7103 [1] BEARING  
32. 4N-7353 [1] PLATE  
33. 2P-8617 [1] RACK  
34. 4N-4124 [1] COVER  
  4N-4125 [1] GASKET  
35. 4N-7354 [1] SPACER  
  C   INDICATES CHANGE
 

#UEG0747S0123
 

4N-0817: FUEL INJECTION PUMP GROUP

4N817 FUEL INJECTION PUMP GROUP--Type 2
Part of 4N4145 Governor & Fuel Injection Pump Group shown on Page 75
6N1043 Pump parts are shown on Page 76B
c156322 UEG0747S
4N0817 FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1M-1077 [5] SEAL  
2. 2M-4314 [6] BUSHING  
3. 8H-9204 [6] WASHER  
4. 6N-1043 Y [6] PUMP GROUP  
    (Separate Illustration)
5. 4N-4124 [1] COVER  
6. 4N-4125 [1] GASKET  
7. 2P-8617 [1] RACK  
8. 4N-7354 [1] SPACER  
9. 5M-2697 [6] SPACER .1700 in. (4.32 mm) thick  
  2M-4208 [6] SPACER .1740 in. (4.42 mm) thick  
  2M-4209 [6] SPACER .1780 in. (4.52 mm) thick  
  2M-4210 [6] SPACER .1820 in. (4.62 mm) thick  
  2M-4211 [6] SPACER .1860 in. (4.72 mm) thick  
  2M-4212 [6] SPACER .1900 in. (4.83 mm) thick  
  5M-2691 [6] SPACER .1940 in. (4.93 mm) thick  
  5S-7189 [6] SPACER .1980 in. (5.03 mm) thick  
10. 4N-7353 [1] PLATE  
12. 3S-9736 [6] LIFTER ASSEM.  
13. 0S-1618 [6] BOLT  
14. 7F-8036 [1] LOCK  
  9M-1974 [2] WASHER  
  6N-1172 [2] SLEEVE  
15. 4N-0631 [1] GEAR ASSEM.  
  [1] GEAR (72 teeth)  
16. 4N-2483 [1] SPRING  
17. 4N-4051 [1] YOKE  
18. 6D-9953 [2] PIN (spring)  
19. 4N-0627 [1] PIN  
20. 4N-0818 [1] CAMSHAFT ASSEM.  
21. 9F-7882 C [1] DOWEL  
22. 4N-0812 [1] HOUSING ASSEM.  
23. 4B-9782 [1] BALL  
24. 4M-1474 C [3] PIN  
25. 9S-4160 [1] BEARING  
26. 5M-6214 [3] PLUG  
27. 1P-0232 [6] BALL  
  1P-0234 [6] DOWEL  
28. 1S-7101 [2] BEARING  
29. 2B-7408 C [1] PLUG  
30. 9S-9702 C [2] DOWEL  
31. 1S-7103 [1] BEARING  
32. 1S-1953 C [1] BEARING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0747S0124
 

6N-1043: PUMP GP-FUEL INJECTION

6N1043 FUEL INJECTION PUMP GROUP
Part of 4N817 Fuel Injection Pump Group shown on Page 76A
c157288 UEG0747S
6N1043 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8S-3652 [1] WASHER  
2. 1S-8634 [1] SPRING  
3. 4N-2484 [1] BONNET  
4. 2S-1631 [1] VALVE  
5. 1M-3506 [1] RING  
6. 4N-4997 [1] PLUNGER & BARREL ASSEM.  
7. 1S-7592 [1] SPRING  
 

#UEG0747S0125
 

4N-4267: TORQUE CONTROL GP

GOVERNOR TORQUE CONTROL (4N4267 N/S)--Type 1
Part of 4N4145 Governor and Fuel Injection Pump Group shown on Page 75
c143957 UEG0747S
4N4267 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [2] BOLT  
2. 9M-6292 [1] LOCK  
3. 4N-4218 [1] CONTACT  
4. 2S-7391 [1] BAR  
5. 8M-9062 [1] RETAINER  
6. 2S-7390 [2] SPACER  
7. 3S-0602 [1] RETAINER  
8. 1P-6452 [1] INSULATOR  
 

#UEG0747S0126
 

4N-4267: TORQUE CONTROL GP

GOVERNOR TORQUE CONTROL (4N4267 N/S)--Type 2
Part of 4N4145 Governor and Fuel Injection Pump Group shown on Page 75
c203605 UEG0747S
4N4267 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-7957 [ 2] BOLT  
2. 9M-6292 [ 1] LOCK  
3. 4N-4218 [ 1] CONTACT  
4. 2S-7391 [ 1] BAR  
5. 8M-9062 [ 1] RETAINER  
6. 1P-9958 C [ 2] INSULATOR  
7. 3S-0602 [ 1] RETAINER  
8. 1P-6452 [ 1] INSULATOR  
9. 9L-7235 C [ 1] SHIM  
    INDICATES CHANGE
 

#UEG0747S0127
 

4N-3382: GOVERNOR GROUP

4N3382 GOVERNOR GROUP--Part 1 of 2 - Type 1
Part of 4N4145 Governor & Fuel Injection Pump Group shown on Page 75
c161160 UEG0747S
4N3382 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4154 [1] COLLAR  
2. 8H-9181 [1] SPRING  
3. 3P-0131 [1] SPRING  
4. 2P-8697 [1] GASKET  
5. 4N-4063 [1] LEVER ASSEM.  
  9S-4466 [1] LEVER ASSEM.  
6. 9M-9788 [1] PLUNGER  
7. 4L-9971 [1] SPRING  
8. 5H-1351 [1] PIN  
9. 9S-4468 [1] BOLT  
10. 2F-4159 [1] LOCK  
11. 9S-4673 [1] BAND ASSEM.  
12. 2N-0479 [1] WEIGHT ASSEM.  
  2N-0477 [2] WEIGHT  
13. 1S-5440 [2] DOWEL  
14. 9M-6303 [1] SPRING  
15. 8M-8993 [1] RING  
  8M-8726 [1] DOWEL  
16. 3K-0810 [1] RING  
17. 7B-8105 [1] LOCK  
18. 9M-6293 [1] LOCK  
19. 0S-1615 [3] BOLT  
20. 4N-3383 [1] PISTON ASSEM.  
  7S-8447 [1] PISTON ASSEM.  
21. 4N-0820 [1] SLEEVE  
22. 8M-8997 [1] SEAL  
23. 4N-3507 [1] CYLINDER  
24. 2S-0007 [1] SLEEVE  
25. 7M-7219 [1] BEARING  
  7M-7193 [2] RACE  
26. 9M-6302 [2] WASHER  
27. 2S-0008 [1] SEAT  
28. 2P-9557 [1] SEAT ASSEM.  
29. 3S-9637 C [1] WASHER  
30. 8M-8739 [1] BOLT  
31. 2P-8679 [1] STRAINER ASSEM.  
32. 8S-5388 [2] GASKET  
33. 1B-2714 [2] BOLT  
  1B-4330 [2] NUT  
  5P-0537 C [4] WASHER  
34. 2N-4386 [1] COVER  
35. 2P-8707 [1] PLATE ASSEM.  
36. 8L-4175 [1] DOWEL  
37. 9M-4704 [1] SCREW  
38. 8L-4155 [1] SCREW  
  5S-9607 [1] NUT  
39. 2P-8669 [1] GASKET  
  C   INDICATES CHANGE
 

#UEG0747S0128
 

4N-3382: GOVERNOR GROUP

4N3382 GOVERNOR GROUP--Part 2 of 2--Type 1
Part of 4N4145 Governor & Fuel Injection Pump Group shown on Page 75
c205601 UEG0747S
4N3382 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-1542 [1] SCREW (low-idle)  
2. 2J-0157 [2] SEAL  
3. 1D-4540 [3] BOLT  
4. 1B-9575 [1] BOLT  
5. 5L-8992 [1] COVER  
6. 6N-1810 C [1] HOUSING ASSEM.  
7. 4N-4879 [1] PLUG  
8. 8S-0134 [1] BEARING  
9. 4F-4585 [1] PLUG  
10. 8M-8403 [1] GUIDE  
11. 9S-0798 [1] BEARING  
12. 4N-3381 [1] COVER ASSEM.  
13. 4N-3384 [1] LEVER  
14. 5M-6228 [1] BEARING  
15. 1S-7984 [1] BEARING  
16. 2S-4434 [1] SPACER  
17. 5P-0796 [2] SEAL  
18. 4N-3390 [1] LEVER  
19. 1S-7336 [2] LOCK  
20. 0S-1614 [2] BOLT  
21. 4N-0951 [1] SHAFT  
22. 3P-0009 [1] INSULATOR  
23. 2A-0762 [2] BOLT  
24. 6L-1756 [1] BOLT  
  4B-9747 [1] WASHER  
25. 9M-1974 [5] WASHER  
26. 2B-2695 [1] BOLT  
27. 5L-8991 [1] GASKET  
28. 3S-1494 [1] SCREW (high-idle)  
29. 8L-4308 [1] BOLT  
30. 5P-3272 [1] SEAL  
31. 8L-8883 [1] SHAFT  
  C   INDICATES CHANGE
 

#UEG0747S0129
 

4N-3382: GOVERNOR GROUP

4N3382 GOVERNOR GROUP--Part 1 of 2--Type 2
Part of 4N4145 Governor & Fuel Injection Pump Group shown on Page 75
c161161 UEG0747S
4N3382 GOVERNOR GROUP Parts scheme
  For full view, you need register

Parts for your 3406 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8L-4154 [1] COLLAR  
2. 8H-9181 [1] SPRING  
3. 9N-2289 C [1] SPRING  
4. 2P-8697 [1] GASKET  
5. 4N-4063 [1] LEVER ASSEM.  
  9S-4466 [1] LEVER ASSEM.  
6. 9M-9788 [1] PLUNGER  
7. 4L-9971 [1] SPRING  
8. 5H-1351 [1] PIN  
9. 9S-4468 [1] BOLT  
10. 2F-4159 [1] LOCK  
11. 9S-4673 [1] BAND ASSEM.  
12. 2N-0479 [1] WEIGHT ASSEM.  
  2N-0477 [2] WEIGHT  
13. 1S-5440 [2] DOWEL  
14. 9M-6303 [1] SPRING  
15. 4N-3887 C [1] RING  
  2P-8630 C [1] DOWEL  
16. 3K-0810 [1] RING  
17. 7B-8105 [1] LOCK  
18. 9M-6293 [1] LOCK  
19. 0S-1615 [3] BOLT  
20. 4N-3383 [1] PISTON ASSEM.  
  7S-8447 [1] PISTON ASSEM.  
21. 4N-0820 [1] SLEEVE  
22. 8M-8997 [1] SEAL  
23. 4N-3507 [1] CYLINDER  
24. 2S-0007 [1] SLEEVE  
25. 7M-7219 [1] BEARING  
  7M-7193 [2] RACE  
26. 9M-6302 [2] WASHER  
27. 6N-8629 C [1] SEAT  
28. 6N-3504 C [1] SEAT  
30. 8M-8739 [1] BOLT  
31. 2P-8679 [1] STRAINER ASSEM.  
32. 8S-5388 [2] GASKET  
33. 1B-2714 [2] BOLT  
  1B-4330 [2] NUT  
  5P-0537 [4] WASHER  
34. 2N-4386 [1] COVER  
35. 2P-8707 [1] PLATE ASSEM.  
36. 8L-4175 [1] DOWEL  
37. 9M-4704 [1] SCREW  
38. 8L-4155 [1] SCREW  
  1B-4201 C [1] NUT  
39. 2P-8669 [1] GASKET  
  C   INDICATES CHANGE
 

Information:

Engine News
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar
1979/08/08
New Timing Advance Weight Used
1980/10/01
Explanation Of Differences In Timing Advance Information
1981/08/26
Part Number For Fuel Injection Pump Group In New Location
1981/11/25
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1981/12/16
New Idler Shaft Used In Fuel Transfer Pumps
1982/02/24
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
Change 6V3060 EGR Testers To LES Testers
1983/04/27
Service Information For Woodward Governors
1983/10/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
Fill Oil Sump Before Installing Woodward Governor
1985/01/16
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct
1986/05/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters
1987/10/01
New Fuel Shutoff Solenoid Assembly Used
1988/11/01
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups
1991/05/01
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks
1992/08/01
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/01
Improvements Made To Remanufactured 0R-3008 Fuel Transfer Pump{1256}
1997/03/01
New Spring Used In Fuel Ratio Control
1977/03/15
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Fuel Transfer Pump Shaft With Chromium Plate
1977/10/12
New Design Seals Decrease Shaft Wear In Fuel Transfer Pump
1978/08/30
Different O-Ring Seals Now Used In Fuel Injection Pump Group
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
Fuel System and Fuel Ratio Control Test Procedure{1264, 1278}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Specifications
Fuel System Identification
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection
3406 INDUSTRIAL & MARINE ENGINES
Governor
3406 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance Unit<BR> [4N8008 (PC); [6N5202 (DI)]
3406 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3406 INDUSTRIAL & MARINE ENGINES
Drive For Fuel Transfer Pump And Tachometer
3406 INDUSTRIAL & MARINE ENGINES
Woodward PSG Governor
3406 INDUSTRIAL & MARINE ENGINES
Governor Linkage
3406 INDUSTRIAL & MARINE ENGINES
Governor Air Actuator
3406 INDUSTRIAL & MARINE ENGINES
Governor Controls
3406 INDUSTRIAL & MARINE ENGINES
Disassembly and Assembly
Fuel Transfer Pump
3406 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump (Earlier)
3406 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump (Later)
3406 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance (Earlier)
3406 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance (Later)
3406 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor (Earlier)
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor (Later)
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor (Earlier And Later)
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing And Governor
3406 INDUSTRIAL & MARINE ENGINES
Governor
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump And Governor Drive
3406 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Timing Advance Weight Used{1272,1288,1286,1264}
1980/10/06
Troubleshooting The Fuel Ratio Control Group For Low Power Complaints{1278}
1981/08/24
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group{1272,1288}
1981/12/14
New Idler Shaft Used In Fuel Transfer Pumps{1256}
1982/02/22
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
New Rack Shutoff Solenoid Available{1257,1259}
1983/02/28
Information For Repair Of Hydraulic Fuel Ratio Controls{1278}
1983/08/15
Service Information For Woodward Governors{0374,1264}
1983/09/26
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Fill Oil Sump Before Installing Woodward Governor{1264,1288,1289}
1984/12/10
Remanufactured Air Fuel Ratio Controls {1278,7754}
1985/01/14
Only The External Needle Valve Can Be Adjusted On Woodward EG3PC Or EG10PC Actuators{1265,1289}
1985/02/04
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Be Sure The Polarity Of The Electrical Connector On EG3P Woodward Actuator Assembly Is Correct{1265,1250}
1986/05/05
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Spring Used In Fuel Ratio Control{1278}
1977/03/21
Fuel Transfer Pump Shaft With Chromium Plate{1256}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Design Seals Decrease Shaft Wear In Fuel Transfer Pump{1256}
1978/08/28
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
To Prevent A Possible Change In The Fuel Rack Setting, A Specific Assembly Procedure Must Be Used To Tighten The Bolt On The Governor Stop Collar{1259,1257,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Replace Camshaft And Install New Lifters If Pitting, Spalling, Or Wear Occurs On Lobes Of 4N0599 And 4N0602 Camshafts In Fuel Injection Pump Groups{1251,1253}
1991/05/20
Fuel Injection Pump Improvements{1251}
1994/02/07

Caterpillar Parts SIS Catalog 3406 :

GOVERNOR AND FUEL PUMP DRIVE GROUP
4N-3950 GOVERNOR AND FUEL PUMP DRIVE GROUP
FUEL TRANSFER PUMP GROUP
4N-3948 FUEL TRANSFER PUMP GROUP
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
FUEL TRANSFER PUMP GROUP
4N-3948 FUEL TRANSFER PUMP GROUP
LINES GP-FUEL INJECTION
4N-1662 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4N-1662 LINES GP-FUEL INJECTION
LINES GP-FLEXIBLE FUEL
3N-6668 LINES GP-FLEXIBLE FUEL
LINES GP-FLEXIBLE FUEL
3N-6668 LINES GP-FLEXIBLE FUEL
GOV & FUEL INJ PUMP GP
4N-4145 GOV & FUEL INJ PUMP GP
FUEL INJECTION PUMP GROUP
4N-0817 FUEL INJECTION PUMP GROUP
FUEL INJECTION PUMP GROUP
4N-0817 FUEL INJECTION PUMP GROUP
PUMP GP-FUEL INJECTION
6N-1043 PUMP GP-FUEL INJECTION
TORQUE CONTROL GP
4N-4267 TORQUE CONTROL GP
TORQUE CONTROL GP
4N-4267 TORQUE CONTROL GP
GOVERNOR GROUP
4N-3382 GOVERNOR GROUP
GOVERNOR GROUP
4N-3382 GOVERNOR GROUP

Truck sale:

Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
32.000 
Caterpillar 3406-365, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
FINNING CHILE S.A.
 
41.565 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


 
55.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
45.000 
Caterpillar 3406, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.