GASKET KITS 12F MOTOR GRADER

Pos.	Part No	Qty	Parts name	Comments
	5P-1915		DIESEL ENGINE COMPLETE
	5P-1937		WATER PUMP
	5P-1964		SUPPLEMENT ENGINE OVERHAUL
	5P-1988		VALVE GRINDING
	9S-3370		TRANSFER GEAR, BEVEL GEAR AND FLYWHEEL CLUTCH
	9S-3371		TRANSMISSION

#UEG0756S0021

7S-5141: ENGINE MOUNTING HARDWARE

ENGINE MOUNTING HARDWARE

ENGINE MOUNTING HARDWARE (7S5141 N/S)

UEG0756S0021 UEG0756S

For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
1A-8537	[1]	BOLT-SUPPORT TO FRAME ASSEMBLY
3B-4510	[4]	LOCKWASHER-SUPPORT TO FRAME ASSEMBLY
1D-4720	[4]	NUT-BOLT TO FRAME ASSEMBLY
1S-5761	[4]	SHIM-(.036" THICK) SUPPORT TO FRAME
1S-5763	[4]	SHIM-(.015" THICK) SUPPORT TO FRAME
1S-5762	[8]	SHIM-(.060" THICK) SUPPORT TO FRAME

#UEG0756S0022

6D-3700: GOVERNOR CONTROL

GOVERNOR CONTROL

GOVERNOR CONTROL (6D3700 N/S)-PART 1

c129820 UEG0756S

For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6D-5708	[1]	LEVER
2.	3K-4290	[2]	BALL JOINT
3.	2M-2830	[1]	ROD
4.	6D-0475	[1]	LINK ASSEM.
5.	5B-9079	[3]	NUT
6.	1B-4203	[3]	NUT
7.	3B-4506	[4]	LOCKWASHER
8.	1A-2029	[4]	BOLT
9.	5D-4103	[1]	BRACKET ASSEM.
10.	5D-4101	[1]	BEARING
			(Part of 5D4103 Bracket Assem.)
11.	6D-0746	[1]	BRACKET ASSEM.
12.	5D-4101	[1]	BEARING
			(Part of 6D746 Bracket Assem.)
13.	6H-1717	[2]	BOLT
14.	3B-4508	[2]	LOCKWASHER
15.	6D-5861	[1]	LEVER
16.	5D-4104	[1]	SHAFT
17.	1B-8704	[5]	KEY
18.	2A-4996	[1]	BOLT
19.	4B-2152	[1]	BOLT
20.	1B-4201	[1]	NUT
21.	3B-8485	[1]	FITTING
22.	6D-6046	[1]	ROD ASSEM.
23.	9S-1303 C	[2]	PIN
24.	3B-4607	[3]	COTTER PIN
25.	3B-3551	[1]	LEVER
26.	1A-2457	[1]	PIN
27.	3D-9609	[1]	END
28.	1A-8285	[2]	NUT
29.	6D-3449	[1]	ROD
30.	4F-1001	[1]	END
31.	5D-8444	[1]	LEVER
32.	6D-5707	[1]	LEVER
33.	0S-1591	[1]	BOLT
34.	1D-4717	[1]	NUT
35.	1B-4669	[1]	COLLAR
36.	4B-3574	[1]	SETSCREW
37.	1B-2578	[1]	NUT
38.	6D-3453	[1]	SHAFT
39.	3B-8489	[2]	FITTING
	C		INDICATES CHANGE FROM PREVIOUS

#UEG0756S0023

6D-3700: GOVERNOR CONTROL

GOVERNOR CONTROL

GOVERNOR CONTROL (6D3700 N/S)-PART 2

c129821 UEG0756S

For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1D-5117	[3]	NUT
2.	4H-2186	[1]	TREADLE ASSEM.
	3H-3244	[1]	SPACER
			(Part of 4H2186 Assem.)
3.	3B-1915	[4]	BOLT
4.	1D-4717	[8]	NUT
5.	3B-4506 C	[12]	LOCKWASHER
6.	4D-9408	[1]	SHAFT
7.	1B-8706	[2]	KEY
8.	6D-7885	[2]	PLATE
9.	6D-7884	[2]	BEARING ASSEM.
10.	6D-5923	[1]	LEVER
11.	6D-3446	[1]	TREADLE ASSEM.
12.	5B-2208	[1]	BOLT
13.	3D-4559	[1]	TUBE ASSEM.
14.	6D-6045	[1]	ROD ASSEM.
15.	6B-7589	[1]	SPRING
16.	2D-6417	[1]	RING
17.	9S-1303	[2]	PIN
18.	3B-4607	[4]	COTTER PIN
19.	4B-4278	[4]	WASHER
20.	1A-2457	[1]	PIN
21.	4B-5273	[1]	WASHER
22.	5B-2551	[1]	DISC
23.	5D-0992	[1]	PLATE ASSEM.
	4F-8686	[1]	BEARING
			(Part of 5D992 Plate Assem.)
24.	1A-2029	[3]	BOLT
25.	5M-9788	[1]	NUT
26.	6D-7203	[1]	BRACKET ASSEM.
27.	0S-1573	[2]	BOLT
28.	3B-4508	[2]	LOCKWASHER
29.	5D-1005	[1]	RETAINER
30.	4J-6580	[1]	WASHER
31.	0L-0829	[1]	HANDLE
32.	7D-1605 C	[1]	HANDLE
33.	3B-1915	[3]	BOLT
34.	0L-0821	[1]	RETAINER
35.	5D-0998	[6]	SPRING
36.	7D-3362 C	[1]	ROD ASSEM.
37.	5B-2279	[1]	ROD END
38.	1B-7238	[1]	ROD END
			(Parts of 7D3362 Assem.)
39.	4H-1224	[1]	TUBE ASSEM.
40.	0S-1571	[1]	BOLT
41.	4H-1232	[1]	LEVER
42.	5B-1133	[1]	PIN
43.	4H-2584	[1]	LEVER ASSEM.
	4H-1240	[1]	BUSHING
			(Part of 4H2584 Lever Assem.)
44.	0S-1594	[2]	BOLT
45.	3B-4615	[1]	COTTER PIN
	4B-1040	[1]	WASHER
46.	6D-3452	[1]	BRACKET ASSEM.
47.	4H-1271	[1]	PIN
			(Part of 6D3452 Bracket Assem.)
48.	2D-2285	[2]	BOLT
	1B-2578	[2]	NUT
49.	4F-1001	[1]	END
50.	1A-8285	[1]	NUT
51.	3D-2193	[1]	RETAINER
52.	4F-9059	[1]	SEAL
53.	2D-6416	[1]	WASHER
54.	4D-9469	[1]	SPRING
	C		INDICATES CHANGE FROM PREVIOUS

#UEG0756S0024

7D-1050: FUEL LINES GROUP

FUEL LINES GROUP

7D1050 FUEL LINES GROUP

c111758 UEG0756S

For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8999	[1]	FITTING
	8F-8997	[1]	NUT
			(Part of 3B8999 Fitting)
2.	4S-8457 H		TUBE (.375" O.D.) 44.49"
3.	7B-1597	[1]	CLIP
4.	9M-8406	[4]	CLIP
5.	0S-1594	[4]	BOLT
	3B-4506	[4]	LOCKWASHER
6.	8B-4509	[1]	FITTING
	8F-8997	[1]	NUT
			(Part of 8B4509 Fitting)
7.	6B-2982	[1]	TEE
8.	7D-1047	[2]	HOSE ASSEM. (45.38" long overall)
9.	4K-8302	[2]	CLIP
10.	0S-1621	[1]	BOLT
	3B-4508	[1]	LOCKWASHER
11.	3B-7255	[2]	BUSHING
12.	2D-5802	[2]	VALVE
	H		ORDER BY THE FOOT

#UEG0756S0025

2P-6854: OIL FILLER GROUP

OIL FILLER GROUP

2P6854 OIL FILLER GROUP
Part of 8D6530 Vandalism Protection Arrangement listed on Page 274

c212537 UEG0756S

For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2P-2720	[1]	GASKET
2.	0S-1588 C	[2]	BOLT
3.	2P-2721	[1]	PIPE ASSEM.
	2P-2719	[1]	PIPE
4.	8S-4212	[1]	RIVET
5.	2P-2717	[1]	HASP
6.	6N-2985 C	[1]	CAP ASSEM.
7.	5M-2894 C	[2]	WASHER
	8S-7949 H		PADLOCK GROUP
			(Includes)
	8M-0439	[2]	KEY
			(May Be Obtained From Parts Department
	C		INDICATES CHANGE
	H		NOT PART OF 2P6854 OIL FILLER

#UEG0756S0026

4N-6392: REFRIGERANT COMPRESSOR

REFRIGERANT COMPRESSOR

4N6392 REFRIGERANT COMPRESSOR ARRANGEMENT-Factory Installation
Also part of 9D5755 Air Conditioner and Cab Arrangement
listed on Page 272A. AN ATTACHMENT

UEG0756S0026 UEG0756S

For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
4N-6016	[1]	REFRIGERANT COMPRESSOR GROUP
4N-6013	[1]	VEE BELT
4N-6381	[1]	PULLEY ASSEMBLY

#UEG0756S0027

1P-2780: REFRIGERANT COMPRESSOR

REFRIGERANT COMPRESSOR

1P2780 REFRIGERANT COMPRESSOR GROUP
Part of 4N6016 Refrigerant Compressor Group shown on Page 26

c150160 UEG0756S

1P2780 REFRIGERANT COMPRESSOR Parts scheme

For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-6416	[1]	COMPRESSOR GROUP
2.	4N-9269 CH	[1]	COIL KIT
			(Consists of Coil Assem. & Gasket)
3.	4N-5417 CH	[1]	PULLEY KIT
			(Consists of Pulley Assem., Shield ASSEM., GASKET & SEAL)
4.	4N-5416 CH	[1]	BEARING KIT
			(Consists of Bearing, Shield Assem. SEAL & GASKET)
5.	1P-6361	[1]	DRIVE ASSEM.
6.	1P-6355	[1]	VALVE ASSEM.
7.	4N-5418 CH	[1]	SEAL KIT
			(Consists of Shield Assem., Seal & GASKET)
8.	1P-6357 H	[1]	SEAL KIT
	C		INDICATES CHANGE
	H		REPAIR KITS ARE AVAILABLE

#UEG0756S0028

1P-2780: REFRIGERANT COMPRESSOR

REFRIGERANT COMPRESSOR

1P2780 REFRIGERANT COMPRESSOR GROUP-Type 2-Replaced by 7N4297
shown on Page 26D
Part of 4N6016 Refrigerant Compressor Group shown on Pages 26, 26A and 26B

c213717 UEG0756S

For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-6416	[1]	COMPRESSOR GROUP
2.	7N-4295 C	[1]	REFRIGERANT COMPRESSOR KIT
			(Includes coil assem., cover kit, drive assem., key, nut, pulley assem., rings, seals, seal kit, shield group and sleeve.)
3.	7N-0809 C	[1]	KEY
4.	6N-8639 C	[1]	NUT
5.	014-5111 C	[3]	SCREW
6.	1P-6355	[1]	VALVE ASSEM.
7.	1H-8171 C	[2]	SEAL
	C		INDICATES CHANGE

#UEG0756S0029

4N-6016: REFRIGERANT COMPRESSOR

REFRIGERANT COMPRESSOR

4N6016 REFRIGERANT COMPRESSOR GROUP
Part of 4N6392 Refrigerant Compressor Arrangement listed
on Page 25. 1P2780 Compressor parts are shown on Page 25

c119385 UEG0756S

4N6016 REFRIGERANT COMPRESSOR Parts scheme

For full view, you need register

Parts for your 12F MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1P-2780 Y	[1]	COMPRESSOR GROUP
			(Separate Illustration)
2.	4B-9883	[2]	BOLT
	9M-1974	[2]	WASHER
3.	2P-7424	[1]	COVER
4.	2P-7864	[3]	SCREW
5.	2P-3203	[1]	BOLT
6.	6B-6122	[1]	WASHER
7.	4B-4278	[4]	WASHER
8.	1P-2237	[1]	SWIVEL
9.	1D-4719	[2]	NUT
10.	2P-3201	[2]	BOLT
11.	4N-6010	[1]	PLATE
12.	2P-3204	[2]	BOLT
13.	2P-3261	[3]	NUT
14.	2P-3206	[1]	BOLT
15.	4N-6297	[1]	SUPPORT ASSEM.
19.	2P-3209	[3]	BOLT
20.	1P-2238	[1]	END
21.	0S-1595	[2]	BOLT
22.	1P-2236	[1]	ROD ASSEM.
23.	1D-5117	[1]	NUT
24.	2P-6539	[1]	SUPPORT ASSEM.
	1F-0748	[1]	NUT
25.	9S-7968	[1]	FITTING ASSEM.
26.	0S-1748	[1]	BOLT
27.	9S-7967	[1]	FITTING ASSEM.
28.	7B-3235	[1]	BOLT
	4B-4280	[1]	WASHER (.095 in. thick)
	8S-8320	[1]	SPACER (.69 in. thick)
29.	4N-6011	[1]	PLATE
	Y		SEPARATE ILLUSTRATION

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}

Engine News

Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/23

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}

Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}

Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}

Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Differences in Appearance of Cat <SUP>®</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ^® Reman Parts when Compared to New Parts {1000, 1250}

Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}

Technical Information Bulletin

A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Specifications

Introduction
3306 VEHICULAR ENGINE

Engine Design
3306 VEHICULAR ENGINE

Tool Operating Manual

Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}
Using the Caterpillar Fuel Flow Monitor System{0782, 1000, 1250}

Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}

NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}

142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO₂) {0680, 1000, 7000}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Technical Analysis

Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}
Technical Analysis 1 (TA1) Visual Inspection for Motor Grader {0372, 1000, 7000, 753T, 7565}

Service Magazine

The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11

Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26

New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

A New Screen In The TMI System Provides The Status Of Emission Certification Of Engines {1000}
2000/12/25

A List Of Contacts For Caterpillar Product Support Is Available {1000, 4450, 7000}
2002/03/25

Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27

Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17

Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}

Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}

Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}

Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}

A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog 12F :

8S-1335 MUFFLER GROUP

2P-5610 MUFFLER GROUP

1P-1241 MUFFLER GROUP

7D-7320 AIR CLEANER EXTENSION GROUP

9M-1827 AIR CLEANER ASSEMBLY

7S-6748 AIR CLEANER GROUP

7N-5483 AIR CLEANER GROUP

7S-3605 AIR CLEANER GROUP

7S-5141 ENGINE MOUNTING HARDWARE

6D-3700 GOVERNOR CONTROL

7D-1050 FUEL LINES GROUP

2P-6854 OIL FILLER GROUP

4N-6392 REFRIGERANT COMPRESSOR

1P-2780 REFRIGERANT COMPRESSOR

Truck sale:

Caterpillar 12F, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
MUSTANG CAT

Caterpillar 12F, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
FABICK CAT

149.800

Caterpillar 312F, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
YANCEY BROS. CO.

13,000

Caterpillar 12F, Construction
- motor graders
ALTORFER INC.

159,900

Caterpillar 312F GC, Construction
- Crawler Excavators
N C MACHINERY CO.