AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

12G MOTOR GRADER 61M00001-02628 (MACHINE) IMPLEMENTS Caterpillar SIS



MOTOR GRADER 12G MOTOR GRADER 61M
 12G MOTOR GRADER 61M00001-02628 (MACHINE) UEG0772S 12G 61M   (1973)

Parts group 12G:

  For full view, you need register
IMPLEMENTS
CIRCLE GP
CIRCLE GP
8D-5910 CIRCLE GP
8D5910 CIRCLE GROUP
Serial No. 61M1 to 61M2514 Inclusive
8D9993 Circle parts are shown on Page 115
CIRCLE GP
8D-5910 CIRCLE GP
8D5910 CIRCLE GROUP
Serial No. 61M2515-Up
8D9993 Circle parts are shown on Page 115
CIRCLE AND BEAM ASSEMBLY
8D-9993 CIRCLE AND BEAM ASSEMBLY
8D9993 CIRCLE AND BEAM ASSEMBLY
Part of 8D5910 Circle Group shown on Pages 114 and 114A
9D2977 Circle parts are shown on Page 115A
CIRCLE ASSEMBLY
9D-2977 CIRCLE ASSEMBLY
9D2977 CIRCLE ASSEMBLY
Part of 8D9993 Circle and Beam Assembly shown on Page 115
CIRCLE GP
9D-2385 CIRCLE GP
9D2385 CIRCLE GROUP
Part of 8D9735 & 8D9740 Blade Control Arrangement listed on Pages 170A
& 170B. 9D4926 Circle parts are shown on Pages 115B & 115C
CIRCLE AS
9D-4926 CIRCLE AS
9D4926 CIRCLE ASSEMBLY--Type 1
Part of 9D2385 Circle Group
8D9993 Circle & Beam parts are shown on Page 115
CIRCLE AS
9D-4926 CIRCLE AS
9D4926 CIRCLE ASSEMBLY--Type 2
Part of 9D2385 Circle Group shown on Page 115B
2G3976 Circle & Beam parts are shown on Page 115D
CIRCLE AND BEAM ASSEMBLY
2G-3976 CIRCLE AND BEAM ASSEMBLY
2G3976 CIRCLE AND BEAM ASSEMBLY
Part of 9D4926 Circle Assembly shown on Page 115C
DRAWBAR GP
DRAWBAR GP
8D-5400 DRAWBAR GP
8D5400 DRAWBAR GROUP
Serial No. 61M1 to 61M1587 inclusive
DRAWBAR GP
8D-5400 DRAWBAR GP
8D5400 DRAWBAR GROUP
Serial No. 61M1588-Up
DRAWBAR GP
9D-2400 DRAWBAR GP
DRAWBAR (9D2400 N/S)--Part 1 of 2--Type 1
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 170A and 170B
9D2350 Camdrive parts are shown on Pages 107C and 107D
DRAWBAR GP
9D-2400 DRAWBAR GP
DRAWBAR (9D2400 N/S)--Part 2 of 2--Type 1
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 170A and 170B
9D2475 Ball Resolver parts are shown on Page 107F
DRAWBAR GP
9D-2400 DRAWBAR GP
DRAWBAR (9D2400 N/S)--Part 1 of 2--Type 2
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 170A and 170B
9D2350 Camdrive parts are shown on Pages 107C and 107D
DRAWBAR GP
9D-2400 DRAWBAR GP
DRAWBAR (9D2400 N/S)--Part 2 of 2--Type 2
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 170A and 170B
9D2475 Ball Resolver parts are shown on Page 107F
DRAWBAR GP
9D-2400 DRAWBAR GP
9D2400 DRAWBAR GROUP--Part 1 of 2--Type 3
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 170A and 170B
2G5540 Camdrive parts are shown on Pages 107B-5 and 107B-6
DRAWBAR GP
9D-2400 DRAWBAR GP
9D2400 DRAWBAR GROUP--Part 2 of 2--Type 3
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 170A and 170B
9D2475 Ball Resolver parts are shown on Page 107F
MOLDBOARD GP
MOUNTING GP-GRADE FOLLOWER
9D-2345 MOUNTING GP-GRADE FOLLOWER
9D2345 GRADE FOLLOWER MOUNTING GROUP
Part of 8D9735 Blade Control Arrangement listed on Page 170A
MOUNTING GP-GRADE FOLLOWER
8D-9570 MOUNTING GP-GRADE FOLLOWER
8D9570 GRADE FOLLOWER MOUNTING GROUP
Part of 8D9740 Blade Control Arrangement listed on Page 170B
STORAGE GP-FOLLOW
9D-2440 STORAGE GP-FOLLOW
9D2440 GRADE FOLLOWER STORAGE GROUP
Part of 8D9735 and 8D9740 Blade Control Arrangements
listed on Pages 170A and 170B
FOLLOWER GP-SHOE
8D-0170 FOLLOWER GP-SHOE
8D170 SKID SHOE FOLLOWER GROUP
Part of 8D9735 and 8D9740 Blade Control Arrangements
listed on Pages 170A and 170B
FOLLOWER GP-WHEEL
8D-9110 FOLLOWER GP-WHEEL
8D9110 WHEEL FOLLOWER GROUP--Type 1
Part of 8D9735 and 8D9740 Blade Control Arrangements
listed on Pages 170A and 170B
FOLLOWER GP-WHEEL
8D-9110 FOLLOWER GP-WHEEL
8D9110 WHEEL FOLLOWER GROUP--Type 2
Part of 8D9735 and 8D9740 Blade Control Arrangements
listed on Pages 170A and 107B
FOLLOWER GP-WIRE
8D-9120 FOLLOWER GP-WIRE
8D9120 WIRE FOLLOWER GROUP--Type 1
Part of 8D9735 and 8D9740 Blade Control Arrangements
listed on Pages 170A and 170B
FOLLOWER GP-WIRE
8D-9120 FOLLOWER GP-WIRE
8D9120 WIRE FOLLOWER GROUP--Type 2
Part of 8D9735 and 8D9740 Blade Control Arrangements
listed on Pages 170A and 170B
PLATE GP
PLATE GP-PUSH
9D-3600 PLATE GP-PUSH
9D3600 PUSH PLATE GROUP
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Magazine
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Operation and Maintenance Manual
Foreword
CIRCLE AND DRAWBAR
When Required
CIRCLE AND DRAWBAR
Special Instruction
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Specifications
Drive For The Circle
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Circle Drive Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Circle Drive With Slip Clutch Group (Attachment)<BR> (5T0570 - 12G, 120G, 130G, 140G)
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Circle Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Reuse And Salvage Guidelines
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Disassembly and Assembly
Swivel Joint
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drawbar
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive Motor
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive And Blade Sideshift Lock Check Valves
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drawbar
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drawbar Bolt
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drawbar Bolt
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive Motor (Earlier)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive Motor (Later)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive (Earlier)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive (Later)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Service Magazine
One-Piece Shaft And Lower Brace Made From A Tube Are Now Used In The Circle And Beam Assembly{6154}
1980/04/14
Reinforcement Plate Can Be Installed On Circle Drawbar{6153}
1980/05/26
Front 120&deg; Of Circle Assembly Is Now Heat Treated; Lower Brace Has A Tube And A One-Piece Shaft{6154}
1980/06/02
New Drawbar And Yoke Assembly Has Improved Ball Joint; New Wear Strips Used Between Circle And Drawbar{6153,6154,6155,6170,6171}
1980/08/25
Different Caps And Adapters For Ball Studs On Circle Drawbars Can Be Used Without Plastic Inserts{6170,6171}
1980/11/10
Slip Clutches Now Available On Circle Drive Group{5058,5237,5207,6154}
1981/02/09
New Circle Guide Shoes Can Be Adjusted For Better Control Of Clearance Between Circle Teeth And Drive Pinion{6155,6153}
1981/07/13
6V6037, 6V6038, And 6V6039 Template Available For Installation Of Circle Tooth Segments{0626,6152}
1982/05/10
Improved Circle Tooth Segment{6152}
1982/08/16
New Shims Available To Make Drawbar Wear Strips Level{6153}
1982/09/06
New, Narrower Blade Tip Brackets Used{5254,6154}
1982/10/11
New Drawbar Group Has Several Improvements{6153,6155}
1982/10/11
Lubrication Of Bronze Alloy Wear Strips Is Not Necessary{6155}
1984/01/30
Less Oil Used In Circle Drive Group To Prevent Leakage Through Vent Assembly{5207}
1984/01/30
Replacement Circle Guide Shoes And Bronze Alloy Wear Strips Available For Parts Service{6150,6154,6155}
1984/09/17
Lubrication Of Circle Drive Pinion And Wear Strips; Wear Strip Clearance Adjustment{5207,6155}
1984/11/05
Order The Correct Replacement Parts For Piston Motor Groups In The Circle Drive{5058}
1984/11/19
Hydraulic Motor And Lines Changed For Circle Drive{5050,5200}
1977/04/11
Correct Adjustment And Lubrication Will Improve Circle Component Life {5207,6154}
1987/08/03
Procedure To Test And Adjust Circle Drive Slip Clutch{5207}
1987/08/10
Back-Up Rings Added To Circle Drive Gerotor Motor Groups{5082}
1987/10/12
Install Braces On Circle And Beam Assembly To Prevent Possible Weld Cracks{6154}
1978/01/09
One-Piece Wear Strip Is Replacement For Two-Piece Wear Plate And Adjustment Screw On The Moldboard Sideshift{6154,6151}
1978/05/22
Back-Up Rings Made Of Harder Material Are Available For Use In Circle Drive Gerotor Motor Groups {5082}
1988/05/02
New Circle Drive Pinions Have Longer Service Life {5207}
1988/09/26
New Circle Drive Gerotor Motor Groups Provide Higher Torque To Circle Drive {5082}
1988/12/19
Circle Segments Are Now Available To Make Repairs To Circles That Have Cracked Or Broken Teeth{6154}
1979/02/05
New Seal Ring Used In Gerotor Motor Group For Circle Drive{5050,5200}
1979/04/02
More Information About Use Of Shims With New One-Piece Wear Strips In Circle Groups For Hydraulic Sideshift Moldboards{6154,6151}
1979/07/02
Items To Check If Excessive Effort Is Required To Operate Circle Drive Motor{5050,5235}
1989/01/30
Stronger Bracket Assembly Used In Circle Groups{6150,6154}
1989/09/18
Circle Repair Segments Available{6152,6154}
1990/04/16
Side Shift Cylinder Guard Group Bracket Has Been Improved To Prevent Being Bent {6154}
1993/06/14
Replaceable Sleeve Bearings Can Be Installed In The Circle Assembly And Moldboard Rail Brackets {6154,6157}
1994/02/21
6G-2943 Circle Assembly Can Be Reinforced To Improve Service Life In Severe Applications {6154,6157}
1994/02/28
Circle Drive Unit Cover Can Be Modified To Prevent Oil Loss Through The Vent{5201,5209}
1994/03/07
New Splined Circle Drive Group Provides Improved Performance {5207}
1995/04/10
Ground Body Bolts And Locknuts Improve Retention Of The Aluminum Gear In The Circle Drive Groups {5207}
1995/09/11
Supplement For Special Instruction, &quot;Installation Of Circle Repair Segments&quot;{6154,6152}
1998/07/06
Special Instruction, SEHS7268, "Installation of Circle Repair Segments" Is Now Available {6152, 6154}
2004/05/03
Circle Tooth Profile and the Correct Use of Templates for the Installation of Circle Segments For Certain Motor Graders {6152, 6152}
2012/03/20
Installation of Circle Repair Segments {6152}
2008/03/31
Steel Wear Strips are Available for the Circle Group on Certain Motor Graders {6152, 6154, 6155}
2009/11/16
Steel Wear Strips for the Circle Group May be Modified in Order to Make The Wear Strips Adjustable {6152, 6154, 6155}
2009/11/16
Operation and Maintenance Manual
Foreword
CIRCLE AND DRAWBAR
When Required
CIRCLE AND DRAWBAR
Special Instruction
Installation of 2G7463 and 2G7464 Inserts{6170}
Installation of 2G7463 and 2G7464 Inserts{6170}
Modifying Early Drawbars To Accept A Bolt-On Ball{6153, 6157, 6170, 6171}
Modifying Early Drawbars To Accept A Bolt-On Ball{6153, 6157, 6170, 6171}
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Installation Of 6G5393 Adjustable Shoes On Drawbar Group{6153}
Installation Of 6G5393 Adjustable Shoes On Drawbar Group{6153}
Specifications
Drawbar
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Drawbar Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Disassembly and Assembly
Circle Drawbar
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drawbar
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drawbar Bolt
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drawbar Bolt
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Service Magazine
Reinforcement Plate Can Be Installed On Circle Drawbar{6153}
1980/05/26
New Drawbar And Yoke Assembly Has Improved Ball Joint; New Wear Strips Used Between Circle And Drawbar{6153,6154,6155,6170,6171}
1980/08/25
Different Caps And Adapters For Ball Studs On Circle Drawbars Can Be Used Without Plastic Inserts{6170,6171}
1980/11/10
Changes To Drawbar Pivot Cap And Adapter Permit Easier Removal And Installation Of Ballstud Shims{6171,6170,6153}
1981/03/09
New Circle Guide Shoes Can Be Adjusted For Better Control Of Clearance Between Circle Teeth And Drive Pinion{6155,6153}
1981/07/13
New Shims Available To Make Drawbar Wear Strips Level{6153}
1982/09/06
New Drawbar Group Has Several Improvements{6153,6155}
1982/10/11
Steel Wear Strips Available For Motor Grader Blade Rail{6150,6153}
1986/06/02
Use 3F6523 Pin For A Drawbar Pin{7105}
1977/09/05
Use The Adjustment Procedure That Follows For Later Inserts On Drawbar Ball Stud{6171}
1978/03/20
New Specifications For Drawbar Ball Clearance (Prior To Bolt-on Balls) {6170}
1990/03/19
New Specification For Drawbar With Bolt-on Ball{6170,6171}
1992/05/25
Draw Bar Reinforcement Plate Prevents Cracking In Severe Work Applications{6153}
1993/06/07
Ordering The Correct Ballstud When Making Drawbar Group Repairs {6170}
1995/05/15
Special Instructions SEHS9896, REHS0037 And REHS0038 Available For Installation Of A Bolt-On Ball On Early Drawbars{6153,6157,6170,6171}
1996/11/11
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Specifications
Dust Ejector
3306 VEHICULAR ENGINE
Service Magazine
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Recommendations For Replacement Of Tandem Drive Chains{4063}
1980/11/03
Floor Mats To Be Installed By Dealers{7300}
1985/06/17
Specifications
Rear Accessory Drive Gears
3306 VEHICULAR ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Operation and Maintenance Manual
Foreword
CIRCLE AND DRAWBAR
When Required
CIRCLE AND DRAWBAR
Special Instruction
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Installation Of Blade Cushion Accumulator Arrangements{5077}
Installation Of Blade Cushion Accumulator Arrangements{5077}
Installation Of Blade Float Attachment Arrangements{6150}
Installation Of Blade Float Attachment Arrangements{6150}
Modifications To Blade Cushion Attachments{5077}
Modifications To Blade Cushion Attachments{5077}
Service Magazine
One-Piece Shaft And Lower Brace Made From A Tube Are Now Used In The Circle And Beam Assembly{6154}
1980/04/14
Procedure To Adjust Support Bearing Preload And Gear Backlash (Tooth Clearance) For Bevel Gear And Pinion{3258,3256,3257}
1980/04/14
New Drawbar And Yoke Assembly Has Improved Ball Joint; New Wear Strips Used Between Circle And Drawbar{6153,6154,6155,6170,6171}
1980/08/25
Valve Assembly Used In Centershift Lock Control Group To Prevent Accidental Rotation And Lowering Of Blade{5220,5221,5223,6151}
1980/10/20
Valve Assembly And Nipple Moved From Centershift Lock Control Group To Brake Control Group To Prevent Unauthorized Operation{4282,4267,5220,5221,5223,6151}
1980/11/10
Slip Clutches Now Available On Circle Drive Group{5058,5237,5207,6154}
1981/02/09
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Replacement Moldboard Rail Sections Are Available{5230,6151}
1981/08/10
Shorter Wiper Blade Prevents Contact With Windshield Seal{7305}
1981/11/23
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
6V6037, 6V6038, And 6V6039 Template Available For Installation Of Circle Tooth Segments{0626,6152}
1982/05/10
Improved Circle Tooth Segment{6152}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
New, Narrower Blade Tip Brackets Used{5254,6154}
1982/10/11
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Floor Mats To Be Installed By Dealers{7300}
1985/06/17
Improved Adjustment Procedure For Blade Rail Wear Strips{6151,6174}
1985/12/09
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Modification Of Circuitry In 9D6720 Junction Box Prevents Failure Of Automatic Blade Control{5260}
1977/03/21
New Windshield Wiper Group Uses Single Arm Instead Of Double Parallel Arm, And Shorter Blade Arc (Movement){7305}
1977/04/11
Centershift Extension Groups: A Better Method To Cut A Bank Slope At A 2:1 Ratio{5229,6151}
1977/04/11
Hydraulic Motor And Lines Changed For Circle Drive{5050,5200}
1977/04/11
New Accumulator With Improved Piston And Seals Used In Blade Cushion Arrangement And Steering System{5077,5200,4300}
1977/06/20
Correct Adjustment Of Automatic Blade Control For Accuracy Of Slope Angle Cut In Relation To Slope Control Dial Position{5216}
1977/10/03
One-Piece Wear Strip Is Replacement For Two-Piece Wear Plate And Adjustment Screw On The Moldboard Sideshift{6154,6151}
1978/05/22
Circle Segments Are Now Available To Make Repairs To Circles That Have Cracked Or Broken Teeth{6154}
1979/02/05
New Seal Ring Used In Gerotor Motor Group For Circle Drive{5050,5200}
1979/04/02
New End Bits Used On Moldboards {6804}
1992/03/09
Thicker Retaining Ring Is Available For Use With CAT&reg; GraderBit Assemblies{6151,6150}
1994/02/14
Replaceable Sleeve Bearings Can Be Installed In The Circle Assembly And Moldboard Rail Brackets {6154,6157}
1994/02/21
Circle Drive Unit Cover Can Be Modified To Prevent Oil Loss Through The Vent{5201,5209}
1994/03/07
New Splined Circle Drive Group Provides Improved Performance {5207}
1995/04/10
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
6V6037, 6V6038, And 6V6039 Template Available For Installation Of Circle Tooth Segments{0626,6152}
1982/05/10
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Service Magazine
New Seal Kit Available For Hydraulic System Oil Cooler Gear Pumps{5073}
1989/09/11

Truck sale:

Caterpillar 12G
 
Caterpillar 12G
- motor graders
MILTON CAT
 
45.000 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 12G, Construction
52,000 
Caterpillar 12G, Construction
- motor graders
ALTORFER INC.
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
86.058 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
75.600 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.