AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

BLADE TIP CYLINDER AND MOUNTING (7D9955 N/S) 8J24 Cylinder parts are shown on Page 135 12G MOTOR GRADER


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-CYLINDER
VALVE GP-CHECK
OPERATOR STATION
CONTROL GP-HYDRAULIC

MOTOR GRADER 12G MOTOR GRADER 61M
 12G MOTOR GRADER 61M00001-02628 (MACHINE) UEG0772S 12G 61M   (1973)

HYDRAULIC SYSTEM

CYLINDER GP
BLADE LIFT CYLINDER
8J-6380 BLADE LIFT CYLINDER
MOUNTING GP-CYLINDER
9D-9965 MOUNTING GP-CYLINDER
CYLINDER & MOUNTING GP
7D-9955 CYLINDER & MOUNTING GP
BLADE SHIFT CYLINDER AND MOUNTING
7D-9945 BLADE SHIFT CYLINDER AND MOUNTING
BLADE TIP CYLINDER GROUP
8J-0024 BLADE TIP CYLINDER GROUP
CYLINDER GP-BLADE SIDE SHIFT
8J-0028 CYLINDER GP-BLADE SIDE SHIFT
 

#UEG0772S0240
 

7D-9955: CYLINDER & MOUNTING GP

BLADE TIP CYLINDER AND MOUNTING (7D9955 N/S)
8J24 Cylinder parts are shown on Page 135
c202542 UEG0772S
7D9955 CYLINDER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-0024 Y [1] CYLINDER GROUP  
    (Separate Illustration)
2. 8D-6687 [1] PIN  
3. 5K-5552 C [1] BOLT  
4. 5F-4258 [2] SEAL  
5. 3B-5329 [1] COTTER PIN  
6. 030-1927 C [2] SEAL  
7. 8D-7678 [1] PIN  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0772S0241
 

7D-9945: BLADE SHIFT CYLINDER AND MOUNTING

BLADE SHIFT CYLINDER AND MOUNTING (7D9945 N/S)
8J28 Cylinder parts are shown on Page 136
c202543 UEG0772S
7D9945 BLADE SHIFT CYLINDER AND MOUNTING Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4478 [2] PIN  
2. 8J-0028 Y [1] CYLINDER GROUP  
    (Separate Illustration)
3. 6H-0211 [4] WASHER  
4. 0S-1608 C [1] BOLT  
  1D-4717 [1] NUT  
  3B-4506 [1] LOCKWASHER  
5. 1B-2886 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0772S0242
 

8J-0024: BLADE TIP CYLINDER GROUP

8J24 BLADE TIP CYLINDER GROUP (Change 3)--2.75" Bore x 12.50" Stroke
Part of Blade Tip Cylinder and Mounting
c200106 UEG0772S
8J0024 BLADE TIP CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-0112 [1] RING  
2. 8J-0023 R [1] CYLINDER ASSEM.  
3. 2D-8652 [1] BEARING  
  8J-3774 [2] RING  
4. 4J-8979 [1] SEAL  
5. 1H-5728 [1] SEAL  
6. 4J-9225 [1] RING  
7. 8J-0119 [1] HEAD  
8. 8J-0118 [1] CROWN  
9. 8J-6901 R [1] ROD ASSEM.  
10. 2D-8652 [1] BEARING  
  8J-3774 [2] RING  
11. 8J-5912 [1] SCREW  
12. 5J-8150 [1] SEAL  
13. 7J-5639 [1] BOLT  
14. 6J-9733 [1] SEAL  
15. 5J-7010 [1] SEAL ASSEM.  
16. 8J-0113 [1] PISTON  
17. 8J-7415 [1] WASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0772S0243
 

8J-0028: CYLINDER GP-BLADE SIDE SHIFT

8J28 BLADE SIDE SHIFT CYLINDER GROUP (Change 2)--3.00" Bore x 47.00" Stroke
Part of 7D9945 Blade Shift Cylinder and Mounting Group shown on Page 134
c200097 UEG0772S
8J0028 CYLINDER GP-BLADE SIDE SHIFT Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 6J-5733 [1] RING  
3. 6J-1972 [1] SEAL ASSEM.  
4. 6J-9178 [1] SEAL  
5. 8J-5912 [1] SCREW  
6. 8J-5911 [1] CROWN  
7. 8J-6681 R [1] ROD ASSEM.  
8. 4J-8980 [1] SEAL  
9. 5J-8175 [1] SEAL  
10. 7J-3351 [1] HEAD  
11. 6J-5731 [1] RING  
12. 5H-8848 [1] SEAL  
13. 8J-0027 R [1] CYLINDER ASSEM.  
    (Includes)
14. 6J-0499 [2] LUG  
15. 7J-5682 [1] PISTON  
16. 3K-5234 [1] WASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0772S0244
 

8D-2820: LINES GP-LIFT CYLINDER

8D2820 LIFT CYLINDER LINES GROUP
8J9974 & 8J9975 Valve parts are shown on Pages 127 & 138
c209637 UEG0772S
8D2820 LINES GP-LIFT CYLINDER Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9088 [4] CONNECTOR  
2. 3K-0360 [24] SEAL  
3. 9D-5984 [4] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE (154 cm (60.63 in.)  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
  5P-2467 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
4. 005-4362 [12] ELBOW  
5. 9D-5985 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 90 cm(35.43 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  1P-9919 [1] COUPLING ASSEM. (str(45.0)  
  4S-5414 [2] SLEEVE  
6. 8D-9322 [2] CLAMP  
    -OR-
  2G-5494 C [4] CLAMP  
7. 0S-0509 [8] BOLT  
  4B-4278 [8] WASHER  
8. 3B-4506 [14] LOCKWASHER  
9. 8M-0505 [8] CONNECTOR  
10. 8D-8968 [4] TUBE ASSEM.  
11. 8D-5955 [4] JUNCTION BLOCK  
12. 9S-4191 [4] PLUG  
  3J-1907 [4] SEAL  
13. 9D-5987 [1] HOSE ASSEM. (R.H.-not serv)  
    For service furnish:
  5P-0178 H HOSE 90 cm(35.43 in.)  
  1P-9919 [2] COUPLING ASSEM. (45 degrees)  
  4S-5414 [2] SLEEVE  
  9D-5986 [1] HOSE ASSEM. (L.H.-not serv)  
    For service furnish:
  5P-0178 H HOSE 90 cm(35.43 in.)  
  1P-9919 [2] COUPLING ASSEM. (45 degrees)  
  4S-5414 [2] SLEEVE  
14. 0L-1143 [6] BOLT  
15. 8J-9974 Y [1] VALVE GROUP (R.H.-check)  
  8J-9975 Y [1] VALVE GROUP (L.H.-check)  
    (Separate Illustration)
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0772S0245
 

8J-9975: CHECK & RELIEF VALVE GP

8J9975 PILOT OPERATED CHECK VALVE GROUP
Part of 8D2820 Lift Cylinder Lines, 8D8650 Ripper Lines and 9D2620 Hydraulic
Lines Groups shown on Pages 137, 140 and 189
c207273 UEG0772S
8J9975 CHECK & RELIEF VALVE GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-0331 [1] VALVE  
2. 6J-8696 [1] SHIM 1.22 mm(.048 in.) thick  
  5J-6153 [4] SHIM 0.19 mm(.0076 in.) thick  
3. 2J-6089 [1] SPRINGS  
4. 8J-9285 [1] BYPASS  
5. 9J-4871 C [2] BALL  
6. 9J-0404 [2] PLUG  
  7J-9933 [2] SEAL  
7. 9J-0403 [2] SPRING  
8. 3K-0360 [1] SEAL  
9. 8J-5456 [2] ADAPTER  
  3D-2824 [2] SEAL  
10. 9J-8274 C [1] BODY ASSEM.  
    (Includes)
11. 9J-0405 [2] SEAT  
12. 9J-5768 [1] PISTON  
13. 8J-9979 [2] CHOKE  
14. 4J-5309 [1] SEAL  
15. 8J-9250 [1] PLUG  
  C   INDICATES CHANGE
 

#UEG0772S0246
 

9D-6380: CONTROL AR-HYDRAULIC

9D6380 HYDRAULIC CONTROL ARRANGEMENT--Ripper
AN ATTACHMENT
UEG0772S0246 UEG0772S
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8D-8650 Y [1] RIPPER LINES GROUP  
  8D-9645 Y [1] RIPPER LINKAGE VALVE GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEG0772S0247
 

9D-8375: HYDRAULIC CONTROL ARRANGEMENT

9D8375 HYDRAULIC CONTROL ARRANGEMENT
FOR USE WITH BULLDOZER OR SNOW PLOW
AN ATTACHMENT
UEG0772S0247 UEG0772S
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9D-5675 Y [1] WIRING GROUP  
  9D-8494 Y [1] LINKAGE AND VALVE GROUP  
  9D-8535 Y [1] LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEG0772S0248
 

9D-8376: HYDRAULIC CONTROL ARRANGEMENT

9D8376 HYDRAULIC CONTROL ARRANGEMENT--FOR USE WITH BULLDOZER OR SNOW PLOW AND RIPPER
AN ATTACHMENT
UEG0772S0248 UEG0772S
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8D-8650 Y [1] RIPPER LINES GROUP  
  9D-5675 Y [1] WIRING GROUP  
  9D-8499 Y [1] LINKAGE AND VALVE GROUP  
  9D-8535 Y [1] LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

#UEG0772S0249
 

9D-8377: HYDRAULIC CONTROL ARRANGEMENT

9D8377 HYDRAULIC CONTROL ARRANGEMENT--FOR USE WITH BULLDOZER OR SNOW
PLOW AND SCARIFIER
AN ATTACHMENT
UEG0772S0249 UEG0772S
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9D-5675 Y [1] WIRING GROUP  
  9D-8497 Y [1] LINKAGE AND VALVE GROUP  
  9D-8535 Y [1] LINES GROUP  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Installation Of Improved Steering Cylinders, Sockets And Crossover Relief Valves On Motor Graders{4303}
Installation Of Improved Steering Cylinders, Sockets And Crossover Relief Valves On Motor Graders{4303}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Mounting For Articulation Cylinder
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Cylinder Groups
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Cylinder Mounting
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Steering Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Wheel Lean Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Ball And Socket Joint Inserts
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Sideshift Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Centershift Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Tip Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Articulation Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Hydraulic Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Steering Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Wheel Lean Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Ball And Socket Joint Inserts
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Sideshift Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Tip Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Articulation Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Hydraulic Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Service Magazine
Valve Assembly Used In Centershift Lock Control Group To Prevent Accidental Rotation And Lowering Of Blade{5220,5221,5223,6151}
1980/10/20
Valve Assembly And Nipple Moved From Centershift Lock Control Group To Brake Control Group To Prevent Unauthorized Operation{4282,4267,5220,5221,5223,6151}
1980/11/10
Correct Position Of Shims In Blade Lift And Centershift Cylinder Groups{5102,5223}
1982/04/12
New Pin For Moldboard Shift Cylinder Prevents Loss During Operation{5229}
1984/06/04
Improved Charging Valve For Accumulators And Suspension Cylinders{7107,7201}
1985/06/17
Centershift Extension Groups: A Better Method To Cut A Bank Slope At A 2:1 Ratio{5229,6151}
1977/04/11
Washers Added To Articulation Cylinders Minimize Damage To Cylinder Crowns{7058,4303}
1987/05/25
New Back-up Rings For Hydraulic Cylinders{5200,5100}
1988/03/28
New Hydraulic Cylinder Washers Keep Piston Retaining Bolts Tighter{5200,5213,5223,5229,6150}
1988/05/16
New Articulation And Scarifier Cylinders Have Larger Piston Retaining Bolts{5213,7058}
1988/10/24
New Blade Lift And Centershift Cylinders Have Caps With Shims For Adjustment{5102,5223}
1979/03/12
Adjustment Procedure For Blade Lift Cylinders And Centershift Cylinders{5223,5102}
1979/03/26
Steering System Improvements Prevent Possible Damage To Steering Cylinder Sockets{4303,4304,4305,4322}
1979/08/27
Adjustable Wear Strip Kit Available For Blade Cylinder Tip Bracket {5254,5230}
1989/05/08
Hydraulic Cylinder Drift On All Caterpillar Series G Motor Graders{5050,6150,7562}
1990/04/02
New Articulation Cylinders Which Prevent Piston Bolt Loosening{5265}
1991/12/02
Side Shift Cylinder Guard Group Bracket Has Been Improved To Prevent Being Bent {6154}
1993/06/14
New Side Shift Cylinder Group Used With Higher Torque On Piston Retaining Bolt{5229}
1993/07/12
Lock Valve Group With A Relief For Right Blade Lift Cylinder Is Available On Motor Graders{5102,5100}
1994/02/07
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
Snap Ring Improves Rod Wiper Seal Retention {4303,5101,5102,5104,5213}
1999/07/12
Correction to Specifications, SENR3488 {5265}
2000/02/21
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2002/04/08
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Cat<SUP>&reg;</SUP> Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/07/21

Caterpillar Parts SIS Catalog 12G :

MOUNTING GP-CYLINDER
9D-9965 MOUNTING GP-CYLINDER
LIFT GP-BLADE
8D-5285 LIFT GP-BLADE
LIFT GP-BLADE
8D-5285 LIFT GP-BLADE
BLADE LIFT CYLINDER
8J-6380 BLADE LIFT CYLINDER
CENTERSHIFT CYLINDER GROUP
8J-6367 CENTERSHIFT CYLINDER GROUP
CYLINDER & MOUNTING GP
8D-7950 CYLINDER & MOUNTING GP
CYLINDER & MOUNTING GP
7D-9700 CYLINDER & MOUNTING GP
HYDRAULIC CENTERSHIFT LINES GROUP
8D-9530 HYDRAULIC CENTERSHIFT LINES GROUP
BLADE SHIFT CYLINDER AND MOUNTING
7D-9945 BLADE SHIFT CYLINDER AND MOUNTING
BLADE TIP CYLINDER GROUP
8J-0024 BLADE TIP CYLINDER GROUP
CYLINDER GP-BLADE SIDE SHIFT
8J-0028 CYLINDER GP-BLADE SIDE SHIFT
LINES GP-LIFT CYLINDER
8D-2820 LINES GP-LIFT CYLINDER
CHECK & RELIEF VALVE GP
8J-9975 CHECK & RELIEF VALVE GP
9D-6380 CONTROL AR-HYDRAULIC
9D-8375 HYDRAULIC CONTROL ARRANGEMENT
9D-8376 HYDRAULIC CONTROL ARRANGEMENT

Truck sale:

Caterpillar 12G
 
Caterpillar 12G
- motor graders
MILTON CAT
 
45.000 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 12G, Construction
52,000 
Caterpillar 12G, Construction
- motor graders
ALTORFER INC.
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
86.058 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
75.600 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.