AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

LINES AND VALVE (8D9765 N/S)--Part 2 of 2--Type 1 Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 170A and 170B 8J8419 and 8J3650 Valve parts are shown on Page 170N 12G


HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
FILTER GP
VALVE GP-CHECK
VALVE GP-SOLENOID
DRIVE GP

MOTOR GRADER 12G MOTOR GRADER 61M
 12G MOTOR GRADER 61M00001-02628 (MACHINE) UEG0772S 12G 61M   (1973)

HYDRAULIC SYSTEM

LINES GP-HYDRAULIC
POWER BLADE LINES GROUP
8D-8640 POWER BLADE LINES GROUP
VALVE & LINES GP
8D-9765 VALVE & LINES GP
VALVE & LINES GP
8D-9765 VALVE & LINES GP
VALVE & LINES GP
8D-9765 VALVE & LINES GP
VALVE & LINES GP
8D-9765 VALVE & LINES GP
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
 

#UEG0772S0330
 

8D-9765: VALVE & LINES GP

LINES AND VALVE (8D9765 N/S)--Part 2 of 2--Type 1
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 170A and 170B
8J8419 and 8J3650 Valve parts are shown on Page 170N
c151800 UEG0772S
8D9765 VALVE & LINES GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-7948 [1] ELBOW  
2. 3K-0360 [2] SEAL  
3. 8M-0505 [1] CONNECTOR  
4. 9D-9401 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE- 204 cm(80.32 in.)  
  8S-4055 [1] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
  9S-9727 [1] COUPLING ASSEM.  
5. 9D-9399 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE -107 cm(42.13 in.)  
  8S-4055 [1] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM.  
6. 4S-1962 [4] CLIP  
7. 0S-1595 [2] BOLT  
8. 3B-4508 [3] LOCKWASHER  
9. 030-8189 [1] CONNECTOR  
  3D-2824 [1] SEAL  
10. 8J-8419 Y [1] VALVE GROUP  
    (Separate Illustration)
11. 1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  4B-4278 [4] WASHER  
12. 8J-3650 Y [2] VALVE GROUP (solenoid)  
    (Separate Illustration)
13. 8J-9339 [2] VALVE GROUP  
    (Each Includes)
  6M-5062 [4] SEAL  
14. 7S-6701 [8] BOLT  
  1J-8314 [8] LOCKWASHER  
15. 005-4173 [1] ELBOW  
  2M-9780 [1] SEAL  
16. 4B-3589 [2] SETSCREW  
17. 9D-9228 [1] PLATE  
18. 1D-5117 [2] NUT  
19. 9D-2311 [2] BRACKET  
20. 9D-6367 [2] CLAMP  
21. 1D-4689 C [1] BOLT (carriage)  
  1D-4719 [1] NUT  
22. 031-0223 [1] BOLT- 1.75 in. (44.45 mm) long  
  4B-4280 C [1] WASHER  
24. 0T-0065 C [1] BOLT  
  6N-0905 [1] SPACER  
25. 5K-7143 [2] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0772S0331
 

8D-9765: VALVE & LINES GP

8D9765 LINES AND VALVE GROUP--Part 1 of 2--Type 2
Part of 8D9735 & 8D9740 Blade Control Arrangements listed on Pages 170A & 170B
9J6456 Filter parts are shown on Page 170M
c209851 UEG0772S
8D9765 VALVE & LINES GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-2361 [1] COVER  
2. 9D-2362 [1] COVER  
3. 8M-0505 [6] CONNECTOR  
4. 3K-0360 [11] SEAL  
5. 9D-9498 [4] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE -148 cm(58.27 in.)  
  2P-1461 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  2P-0987 [1] COUPLING ASSEM.  
6. 030-8144 [4] REDUCER  
7. 1P-1441 [4] NUT  
8. 6S-5693 [4] TEE  
9. 030-7948 [4] ELBOW  
10. 9D-9403 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE- 36 cm(14.17 in.)  
  9S-9727 [2] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
11. 3P-2298 [1] ELBOW  
  3D-2824 [1] SEAL  
12. 9J-6456 Y [1] FILTER GROUP  
    (Separate Illustration)
13. 0L-1143 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
  4B-4278 [2] WASHER  
14. 9D-5192 [1] FILTER (fitting)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0772S0332
 

8D-9765: VALVE & LINES GP

8D9765 LINES AND VALVE GROUP--Part 2 of 2--Type 2
Part of 8D9735 & 8D9740 Blade Control Arrangements listed on Pages 170A & 170B
9J5723 & 8J3650 Valve parts are shown on Pages 170M & 170N
c209852 UEG0772S
8D9765 VALVE & LINES GP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-2298 C [1] ELBOW  
2. 3K-0360 C [2] SEAL  
3. 8M-0505 [1] CONNECTOR  
4. 9D-9402 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE- 234 cm(92.20 in.)  
  8S-4055 [1] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
  9S-9727 [1] COUPLING ASSEM.  
5. 9D-9399 [1] HOSE ASSEM. (not serv)  
    (For service furnish:
  5P-0179 H HOSE -107 cm(42.13 in.)  
  8S-4055 [1] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM.  
6. 4S-1962 [4] CLIP  
7. 0S-1595 [2] BOLT  
8. 3B-4508 [3] LOCKWASHER  
9. 030-8189 [1] CONNECTOR  
10. 9J-5723 Y [1] VALVE GROUP  
    (Separate Illustration)
11. 1A-2029 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  4B-4278 [4] WASHER  
12. 8J-3650 Y [2] VALVE GROUP (solenoid)  
    (Separate Illustration)
13. 9J-5724 J [2] VALVE GROUP  
    (Each Includes)
  6M-5062 [4] SEAL  
14. 7S-6701 [8] BOLT  
  1J-8314 [8] LOCKWASHER  
15. 005-4173 [1] ELBOW  
  2M-9780 [1] SEAL  
16. 4B-3589 [2] SETSCREW  
17. 9D-9228 [1] PLATE  
18. 1D-5117 [2] NUT  
19. 9D-2311 [2] BRACKET  
20. 9D-6367 [2] CLAMP  
21. 1D-4689 [1] BOLT (carriage)  
  1D-4719 [1] NUT  
22. 031-0223 [1] BOLT- 44.45 mm(1.75 in.) long  
  4B-4280 [1] WASHER  
24. 0T-0065 [1] BOLT  
  6N-0905 [1] SPACER  
25. 5K-7143 [2] BOLT  
26. 3D-2824 C [2] SEAL  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0772S0333
 

9J-6456: FILTER GROUP

9J6456 FILTER GROUP
Part of Lines and Valve shown on Pages 170K and 170L-1
c152457 UEG0772S
9J6456 FILTER GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-6460 [1] SWITCH ASSEM.  
    (Includes)
2. 3K-0360 H [1] SEAL  
3. 4K-2039 H [1] SEAL  
4. 9J-6470 [1] HEAD  
5. 3J-7354 H [2] SEAL  
6. 9J-6471 [1] BOWL  
7. 9J-6472 [1] ELEMENT ASSEM.  
    (Includes)
8. 4L-7711 H [1] SEAL  
9. 8H-7521 H [1] SEAL  
10. 4J-9219 H [1] RING  
11. 9J-6473 [1] NIPPLE ASSEM.  
12. 5D-6543 H [1] SEAL  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE:
  9J-6488 [1] KIT (seal)  
    (Includes Parts Marked h)
 

#UEG0772S0334
 

9J-5723: CHECK VALVE GROUP

9J5723 CHECK VALVE GROUP
Part of Lines and Valve shown on Page 170L-2
c152059 UEG0772S
9J5723 CHECK VALVE GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8006 [12] PLUG  
  2M-9780 [12] SEAL  
2. 8J-8416 [6] SLEEVE  
3. 5J-4664 [6] SPRING  
4. 9S-8001 [2] PLUG  
  4J-7533 [2] SEAL  
5. 9J-1256 [6] PIN  
6. 4B-9784 [6] BALL  
7. 9S-8002 [22] PLUG  
  3J-7354 [22] SEAL  
8. 9S-8005 [4] PLUG  
  3K-0360 [4] SEAL  
 

#UEG0772S0335
 

8J-8419: CHECK VALVE GROUP

8J8419 CHECK VALVE GROUP
Part of Lines and Valve shown on Page 170L
c119804 UEG0772S
8J8419 CHECK VALVE GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8006 [12] PLUG  
  2M-9780 [12] SEAL  
2. 8J-8416 [6] SLEEVE  
3. 5J-4664 [6] SPRING  
4. 9S-8001 [2] PLUG  
  4J-7533 [2] SEAL  
5. 9J-1256 [6] PIN  
6. 4B-9784 [6] BALL  
7. 9S-8002 [22] PLUG  
  3J-7354 [22] SEAL  
8. 9S-8005 [4] PLUG  
  3K-0360 [4] SEAL  
9. 8J-8418 [1] VALVE GROUP  
 

#UEG0772S0336
 

8J-3650: SOLENOID VALVE GROUP

8J3650 SOLENOID VALVE GROUP
Part of Lines and Valve shown on Page 170L
c148718 UEG0772S
8J3650 SOLENOID VALVE GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4330 [1] NUT  
  3B-4504 [1] LOCKWASHER  
2. 8J-9341 [1] SOLENOID  
3. 8J-9340 [1] CARTRIDGE ASSEM.  
    (Includes)
4. 9J-0487 [1] SPRING  
5. [1] RING  
    THE FOLLOWING REPAIR KIT IS AVAILABLE
  8J-9348 [1] KIT (seal)  
    (Consists of Seals and Ring)
 

#UEG0772S0337
 

9D-1600: DRIVE GP-CIRCLE

9D1600 CIRCLE DRIVE GROUP--Part 1 of 2--Type 1
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 170A and 170B
9J688 and 9J439 Piston Motor parts are shown on Page 121. AN ATTACHMENT
c152449 UEG0772S
9D1600 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0688 [1] MOTOR GROUP  
    -OR-
  9J-0439 YC [1] MOTOR GROUP  
    (Separate Illustration)
3. 1B-5174 [1] PLUG  
4. 9D-1473 [1] WORM  
5. 5K-8454 [3] BOLT  
6. 3B-4508 [10] LOCKWASHER  
7. 6H-1717 [5] BOLT  
8. 2B-7410 [1] PLUG  
9. 2H-9247 [1] SEAL  
10. 9D-1051 [1] CARRIER  
11. 7D-8933 [3] SHAFT  
12. 7D-9015 [3] BEARING  
13. 7D-8932 [6] WASHER  
14. 7D-8931 [1] WASHER  
15. 1H-8128 [1] SEAL  
16. 7D-8929 [3] GEAR (22 teeth)  
17. 7D-9092 [1] HOUSING ASSEM.  
    (Includes)
18. 2D-8806 [2] STUD  
19. 1B-5357 [2] NUT  
20. 7D-8983 [10] SHIM .005 in. (.127 mm) thick  
  7D-8984 [6] SHIM .007 in. (.178 mm) thick  
21. 9M-7432 [1] SEAL  
22. 1B-8708 [1] KEY  
23. 1B-4038 [2] CUP  
  1B-4046 [2] CONE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0772S0338
 

9D-1600: DRIVE GP-CIRCLE

9D1600 CIRCLE DRIVE GROUP--Part 2 of 2--Type 1
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 170A and 170B
AN ATTACHMENT
c202443 UEG0772S
9D1600 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-5357 [4] NUT  
  3B-4508 [4] LOCKWASHER  
2. 9D-1407 [1] HOUSING ASSEM.  
    (Includes)
3. 2D-8154 [4] STUD  
4. 8D-7426 [1] BEARING  
5. 7D-9137 [2] STUD  
6. 2D-8369 [2] STUD  
7. 5F-5434 [1] VENT ASSEM.  
8. 8D-7174 [1] COVER ASSEM.  
    (Includes)
9. 8D-7173 [1] BEARING  
10. 5H-4909 [1] SEAL  
11. 0S-1625 [9] BOLT  
  3K-2889 [9] LOCKNUT  
  2S-5658 [9] WASHER  
12. 8D-5344 [1] GEAR (36 teeth)  
13. 1D-4609 [2] BOLT  
  4F-8135 [2] WASHER  
14. 5K-5288 R [1] SEAL GROUP  
    (Includes)
15. 5K-5129 [2] RING  
16. 8D-7425 [2] WASHER  
17. 8D-7427 [1] SHAFT  
18. 1A-1415 [1] NUT  
  8D-7423 [1] LOCK  
  8D-7424 [1] SPACER  
19. 1K-6870 [4] NUT  
20. 4D-6989 [4] WASHER  
21. 4F-8824 [1] SEAL  
22. 8D-7414 [1] PINION  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0772S0339
 

9D-1600: DRIVE GP-CIRCLE

9D1600 CIRCLE DRIVE GROUP--Part 1 of 2--Type 2
Part of 8D9735 and 8D9740 Blade Control Arrangements listed on Pages 170A and 170B
9J688 and 9J439 Piston Motor parts are shown on Page 121. AN ATTACHMENT
c156431 UEG0772S
9D1600 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0688 [1] MOTOR GROUP  
    -OR-
  9J-0439 Y [1] MOTOR GROUP  
    (Separate Illustration)
3. 1B-5174 [1] PLUG  
4. 9D-1473 [1] WORM  
5. 5K-8454 [3] BOLT  
6. 3B-4508 [10] LOCKWASHER  
7. 6H-1717 [5] BOLT  
8. 2B-7410 [1] PLUG  
9. 2H-9247 [1] SEAL  
10. 9D-1051 [1] CARRIER  
11. 7D-8933 [3] SHAFT  
12. 7D-9015 [3] BEARING  
13. 7D-8932 [6] WASHER  
14. 7D-8931 [1] WASHER  
15. 1H-8128 [1] SEAL  
16. 7D-8929 [3] GEAR (22 teeth)  
17. 2G-1712 C [1] HOUSING  
19. 0S-1585 C [2] BOLT  
20. 7D-8983 [10] SHIM .005 in. (.127 mm) thick  
  7D-8984 [6] SHIM .007 in. (.178 mm) thick  
21. 9M-7432 [1] SEAL  
22. 1B-8708 [1] KEY  
23. 1B-4038 [2] CUP  
  1B-4046 [2] CONE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
New Valve Group Used In Hydraulic Lines Group To Give Protection To Hydraulic Circuits{5235,5057}
1978/08/07
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}

Caterpillar Parts SIS Catalog 12G :

VALVE & LINES GP
8D-9765 VALVE & LINES GP
FOLLOWER GP-WIRE
8D-9120 FOLLOWER GP-WIRE
FOLLOWER GP-WIRE
8D-9120 FOLLOWER GP-WIRE
FOLLOWER GP-WHEEL
8D-9110 FOLLOWER GP-WHEEL
FOLLOWER GP-WHEEL
8D-9110 FOLLOWER GP-WHEEL
FOLLOWER GP-SHOE
8D-0170 FOLLOWER GP-SHOE
STORAGE GP-FOLLOW
9D-2440 STORAGE GP-FOLLOW
MOUNTING GP-GRADE FOLLOWER
8D-9570 MOUNTING GP-GRADE FOLLOWER
VALVE & LINES GP
8D-9765 VALVE & LINES GP
VALVE & LINES GP
8D-9765 VALVE & LINES GP
FILTER GROUP
9J-6456 FILTER GROUP
CHECK VALVE GROUP
9J-5723 CHECK VALVE GROUP
CHECK VALVE GROUP
8J-8419 CHECK VALVE GROUP
SOLENOID VALVE GROUP
8J-3650 SOLENOID VALVE GROUP
DRIVE GP-CIRCLE
9D-1600 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
9D-1600 DRIVE GP-CIRCLE

Truck sale:

Caterpillar 12G
 
Caterpillar 12G
- motor graders
MILTON CAT
 
45.000 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 12G, Construction
52,000 
Caterpillar 12G, Construction
- motor graders
ALTORFER INC.
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
86.058 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
75.600 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.