AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

STEERING LINES (8D6610 N/S)--Part 1 of 2 Serial No. 61M1 to 61M1084 inclusive 12G MOTOR GRADER


HYDRAULIC SYSTEM
LINES GP-STEERING
VALVE GP-RELIEF
OPERATOR STATION
CONTROL GP-STEERING
HYDRAULIC SYSTEM
PUMP GP-METERING
OPERATOR STATION
CONTROL GP-STEERING
HYDRAULIC SYSTEM
CYLINDER GP

MOTOR GRADER 12G MOTOR GRADER 61M
 12G MOTOR GRADER 61M00001-02628 (MACHINE) UEG0772S 12G 61M   (1973)

HYDRAULIC SYSTEM

LINES GP-STEERING
STEERING LINES
8D-6610 STEERING LINES
STEERING LINES
8D-6610 STEERING LINES
LINES GP-STEERING OIL
8D-8610 LINES GP-STEERING OIL
LINES GP-STEERING OIL
8D-8610 LINES GP-STEERING OIL
 

#UEG0772S0360
 

8D-6610: STEERING LINES

STEERING LINES (8D6610 N/S)--Part 1 of 2
Serial No. 61M1 to 61M1084 inclusive
c202556 UEG0772S
8D6610 STEERING LINES Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-2743 [2] STUD  
  1D-4717 [2] NUT  
2. 3B-4506 [18] LOCKWASHER  
3. 9L-9167 [4] SPACER  
4. 9D-1209 [2] PLATE  
5. 6D-3386 [3] SHIM  
6. 0S-1590 [2] BOLT  
7. 030-8188 [4] CONNECTOR  
8. 3K-0360 [7] SEAL  
9. 9D-6001 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE -136 cm(53.54 in.)  
  4S-5414 [2] SLEEVE  
  1P-9919 [2] COUPLING ASSEM.  
10. 030-8194 [1] CONNECTOR  
  2M-9780 [1] SEAL  
11. 005-4362 [3] ELBOW  
12. 9D-6002 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE -156 cm(61.41 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
13. 6D-4247 C [1] CLIP  
14. 0L-1351 [13] BOLT  
15. 8D-9569 [2] PLATE  
16. 9D-6003 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE- 655 cm(257.87 in.)  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
17. 8D-9547 [2] PLATE  
18. 9D-5262 [2] CLAMP  
19. 0S-0509 [1] BOLT  
20. 1S-0994 [1] CLIP  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0772S0361
 

8D-6610: STEERING LINES

STEERING LINES (8D6610 N/S)--Part 2 of 2
Serial No. 61M1 to 61M1084 inclusive
9J630 Valve parts are shown on Page 176
c202545 UEG0772S
8D6610 STEERING LINES Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-6005 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE -75 cm(29.53 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
2. 9D-2547 [1] JUNCTION BLOCK  
3. 0T-0573 [2] BOLT  
4. 3B-4506 [6] LOCKWASHER  
5. 9S-8005 [2] PLUG  
6. 3K-0360 [12] SEAL  
7. 9D-5995 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE- 30 cm(11.81 in.)  
  4S-5414 [2] SLEEVE  
  8S-6393 [2] COUPLING ASSEM.  
8. 5B-9603 [2] BOLT  
9. 9J-0630 Y [1] VALVE GROUP (relief)  
    (Separate Illustration)
10. 6D-4247 [2] CLIP  
11. 0T-0102 [2] BOLT  
  1D-4717 [2] NUT  
12. 1S-0994 [2] CLIP  
13. 9D-6004 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE- 83 cm(32.68 in.)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (straight)  
14. 005-4362 [2] ELBOW  
15. 030-8188 [8] CONNECTOR  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
 

#UEG0772S0362
 

8D-8610: LINES GP-STEERING OIL

8D8610 STEERING LINES GROUP--Part 1 of 2
Serial No. 61M1085-Up
c207146 UEG0772S
8D8610 LINES GP-STEERING OIL Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3M-0496 C [2] STUD  
  1D-4717 [2] NUT  
2. 5P-1075 C [18] WASHER  
3. 2B-0941 [4] SPACER  
4. 9D-1209 [2] PLATE  
5. 6D-3386 [3] SHIM  
6. 0S-1590 [2] BOLT  
7. 030-8188 [4] CONNECTOR  
8. 3K-0360 [7] SEAL  
9. 9D-6001 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 136 cm(53.54 in.)  
  4S-5414 [2] SLEEVE  
  1P-9919 [2] COUPLING ASSEM.  
10. 7K-1181 C [2] STRAP  
11. 005-4362 [3] ELBOW  
12. 9D-6002 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 156 cm(61.41 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
13. 6D-4247 [1] CLIP  
14. 0L-1351 [13] BOLT  
15. 8D-9569 [2] PLATE  
16. 9D-6003 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 655 cm(257.87 in.)  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
17. 8D-9547 [2] PLATE  
18. 9D-5262 [2] CLAMP  
19. 0S-0509 [1] BOLT  
20. 1S-0994 [1] CLIP  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0772S0363
 

8D-8610: LINES GP-STEERING OIL

8D8610 STEERING LINES GROUP--Part 2 of 2
Serial No. 61M1085-Up
9J630 Valve parts are shown on Page 176
c207147 UEG0772S
8D8610 LINES GP-STEERING OIL Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-6005 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 75 cm(29.53 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
2. 9D-2547 [1] JUNCTION BLOCK  
3. 0T-0573 [2] BOLT  
4. 5P-1075 C [6] WASHER  
5. 9S-8005 [2] PLUG  
6. 3K-0360 [12] SEAL  
7. 9D-5995 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 30 cm(11.81 in.)  
  4S-5414 [2] SLEEVE  
  8S-6393 [2] COUPLING ASSEM.  
8. 5B-9603 [2] BOLT  
9. 9J-0630 Y [1] VALVE GROUP (relief)  
    (Separate Illustration)
10. 6D-4247 [2] CLIP  
11. 0T-0102 [2] BOLT  
  1D-4717 [2] NUT  
12. 1S-0994 [2] CLIP  
13. 9D-6004 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 83 cm(32.68 in.)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (straight)  
14. 005-4362 [2] ELBOW  
15. 030-8188 [8] CONNECTOR  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0772S0364
 

9J-0630: RELIEF VALVE GROUP

9J630 RELIEF VALVE GROUP
Part of 8D8610 Steering Lines Group shown on Pages 174A & 175
c209660 UEG0772S
9J0630 RELIEF VALVE GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-7470 C [6] SHIM 1.2192 mm(.048 in.) thick  
  3J-7473 [10] SHIM .1270 mm(.005 in.) thick  
2. 9S-4187 [2] PLUG  
3. 3K-0360 [5] SEAL  
4. 4F-7115 C [2] SPRING  
5. 1J-8497 [2] VALVE  
6. 9S-8004 [2] PLUG  
  3J-1907 [2] SEAL  
7. 6J-1038 [4] SEAL  
8. 4J-0519 [2] SEAL  
9. 8J-9300 [1] MANIFOLD  
10. 9S-8005 [3] PLUG  
11. 8J-9301 [1] BODY  
12. 1D-4566 [4] BODY  
  3B-4508 [4] LOCKWASHER  
13. 8J-6334 C [2] SEAT  
  C   INDICATES CHANGE
 

#UEG0772S0365
 

8D-7530: STEERING CONTROL GROUP

8D7530 STEERING CONTROL GROUP
Serial No. 61M1 to 61M2098 inclusive
c200530 UEG0772S
8D7530 STEERING CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-7362 [1] COVER  
2. 8D-8648 [1] WHEEL  
3. 2R-0620 [3] SCREW  
4. 7D-9719 [1] GASKET  
5. 6S-3065 [1] NUT  
6. 3B-1915 [4] BOLT  
  3K-8909 [4] LOCKWASHER  
7. 8J-6223 Y [1] PUMP GROUP  
    (Separate Illustration)
  Y   SEPARATE ILLUSTRATION
 

#UEG0772S0366
 

8J-6223: BASIC METERING PUMP GROUP

8J6223 BASIC METERING PUMP GROUP
Serial No. 61M1 to 61M2098 inclusive
Part of 8D7530 Steering Control Group shown on Page 176
c154381 UEG0772S
8J6223 BASIC METERING PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2928 C [1] BEARING  
2. 1H-9535 [2] RING  
3. 8F-5340 [1] SEAL  
4. 6S-7821 [1] RING  
5. 7F-8267 [1] SEAL  
6. 6S-7808 [2] RACE  
7. 9J-4742 [1] GEAR SET  
8. 9J-4743 [7] BOLT  
9. 6S-8146 [1] CAP  
10. 065-1176 [1] SPACER  
11. 5L-1100 [1] BEARING  
12. 7J-6833 [1] SEAL  
13. 6S-7807 [1] BUSHING  
14. 9J-2931 [1] BODY GROUP  
    (Includes)
15. 2D-6642 [1] BALL  
16. 6S-8144 [1] RETAINER  
17. 6S-8143 [1] INSERT  
18. 7J-8009 [1] PIN  
19. 7J-8010 [6] SPRING  
20. 7J-6839 [1] DRIVE  
21. 9J-2929 [1] HOUSING  
  7J-6834 [2] BOLT  
22. 9J-2935 [1] RING  
23. 9J-2926 [1] SHAFT  
24. 6S-8149 [1] PLATE  
  C   INDICATES CHANGE
 

#UEG0772S0367
 

9J-7025: BASIC METERING PUMP GROUP

9J7025 BASIC METERING PUMP GROUP
Serial No. 61M2099-Up
Part of 8D7530 Steering Control Group shown on Page 177B
c154382 UEG0772S
9J7025 BASIC METERING PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-2928 [1] BEARING  
2. 1H-9535 [2] RING  
3. 8F-5340 [1] SEAL  
4. 6S-8149 [1] PLATE  
5. 7F-8267 [1] SEAL  
6. 6S-7808 [2] RACE  
7. 9J-4742 [1] GEAR SET  
8. 9J-4743 [7] BOLT  
9. 6S-8146 [1] CAP  
10. 065-1176 [1] SPACER  
11. 5L-1100 [1] BEARING  
12. 7J-6833 [1] SEAL  
13. 6S-7807 [1] BUSHING  
14. 9J-6497 [1] BODY GROUP  
    (Includes)
15. 2D-6642 [1] BALL  
16. 6S-8144 [1] RETAINER  
17. 6S-8143 [1] INSERT  
18. 7J-8009 [1] PIN  
19. 7J-8010 [6] SPRING  
20. 9J-6506 [1] DRIVE  
21. 9J-2929 [1] HOUSING  
  7J-6834 [2] BOLT  
22. 9J-2935 [1] RING  
23. 9J-2926 [1] SHAFT  
 

#UEG0772S0368
 

8D-7530: STEERING CONTROL GROUP

8D7530 STEERING CONTROL GROUP
Serial No. 61M2099-Up
9J7025 Pump parts are shown on Page 177A
c154380 UEG0772S
8D7530 STEERING CONTROL GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-7362 [1] COVER  
2. 8D-8648 [1] WHEEL  
3. 2R-0620 [3] SCREW  
4. 7D-9719 [1] GASKET  
5. 6S-3065 [1] NUT  
6. 3B-1915 [4] BOLT  
  3K-8909 [4] LOCKWASHER  
7. 9J-7025 Y [1] PUMP GROUP  
    (Separate Illustration)
  Y   SEPARATE ILLUSTRATION
 

#UEG0772S0369
 

8J-5538: STEERING CYLINDER GROUP

8J5538 STEERING CYLINDER GROUP (Change 2-4)--Right Hand--2.50" Bore x 9.88" Stroke
Part of Steering Cylinder and Mounting shown on Page 180
c207405 UEG0772S
8J5538 STEERING CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 12G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 8J-7415 [1] WASHER  
3. 8J-6212 [1] RING  
4. 8J-6213 [1] SEAL ASSEM.  
5. 8J-6211 [1] PISTON  
6. 8J-6216 [1] ROD ASSEM.  
7. 8J-6221 [1] HEAD  
8. 8F-6711 [1] SEAL  
  030-3239 [1] RING  
9. 6J-9733 [1] SEAL  
10. 5J-8150 [1] SEAL  
11. 4J-8979 [1] SEAL  
12. 8J-6220 [1] SCREW  
13. 8J-6222 [1] CROWN  
14. 8J-6218 [1] CYLINDER ASSEM.  
15. 8J-6215 [2] RING  
16. 005-8639 C [1] BEARING  
  C   INDICATES CHANGE
 

Information:

Service Magazine
Improved Cold Weather Steering For Series "G" Motor Graders{4304,4307,5068}
1978/11/20
Steering System Improvements Prevent Possible Damage To Steering Cylinder Sockets{4303,4304,4305,4322}
1979/08/27

Caterpillar Parts SIS Catalog 12G :

HYDRAULIC TANK GROUP
8D-6670 HYDRAULIC TANK GROUP
HYDRAULIC TANK GROUP
8D-6670 HYDRAULIC TANK GROUP
HYDRAULIC TANK GROUP
8D-6670 HYDRAULIC TANK GROUP
HYDRAULIC TANK GROUP
8D-6670 HYDRAULIC TANK GROUP
COVER GP-PROTECTION
5D-1910 COVER GP-PROTECTION
DIAL GP-CONTROL
9D-2365 DIAL GP-CONTROL
DIAL GP-CONTROL
9D-2365 DIAL GP-CONTROL
DIAL CONTROL MOUNTING GROUP
9D-2370 DIAL CONTROL MOUNTING GROUP
STEERING LINES
8D-6610 STEERING LINES
LINES GP-STEERING OIL
8D-8610 LINES GP-STEERING OIL
LINES GP-STEERING OIL
8D-8610 LINES GP-STEERING OIL
RELIEF VALVE GROUP
9J-0630 RELIEF VALVE GROUP
STEERING CONTROL GROUP
8D-7530 STEERING CONTROL GROUP
BASIC METERING PUMP GROUP
8J-6223 BASIC METERING PUMP GROUP
BASIC METERING PUMP GROUP
9J-7025 BASIC METERING PUMP GROUP
STEERING CONTROL GROUP
8D-7530 STEERING CONTROL GROUP

Truck sale:

Caterpillar 12G
 
Caterpillar 12G
- motor graders
MILTON CAT
 
45.000 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 12G, Construction
52,000 
Caterpillar 12G, Construction
- motor graders
ALTORFER INC.
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
86.058 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
SIME DARBY INDUSTRIAL SDN BHD
Malaysia
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
75.600 
Caterpillar 12G, bergbau-motorgrader, Bau-Und Bergbauausrüstung
- motor graders
HOLT CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.