AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

BLADE LIFT (2D7836 N/S)--Side View--Part 1 of 2 Serial No. 24R531-Up. 7D7849 Bearing is replaced by 2G4186 shown on Page 113B Note: Quantities shown are those required for both R.H. and L.H. sides 140


WORK TOOLS
BLADE GP
HYDRAULIC SYSTEM
CYLINDER GP
WORK TOOLS
BLADE GP
OPERATOR STATION
CONTROL GP-STEERING

MOTOR GRADER 140 MOTOR GRADER 11R
 NO. 140 MTR. GRADER 11R00691-UP (MACHINE) UEG0782S 140 11R   (1970)

WORK TOOLS

BLADE GP
LIFT GP-BLADE
2D-7836 LIFT GP-BLADE
2D-7836 LIFT GP-BLADE
LIFT GP-BLADE
2D-7836 LIFT GP-BLADE
2D-7836 LIFT GP-BLADE
BEARING ASSEMBLY
2G-4186 BEARING ASSEMBLY
BLADE BRACKET GROUP
7D-6640 BLADE BRACKET GROUP
 

#UEG0782S0150
 

2D-7836: LIFT GP-BLADE

BLADE LIFT (2D7836 N/S)--Side View--Part 1 of 2
Serial No. 24R531-Up. 7D7849 Bearing is replaced by 2G4186 shown on Page 113B
Note: Quantities shown are those required for both R.H. and L.H. sides
c158334 UEG0782S
2D7836 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1571 [4] BOLT  
  3B-4506 [4] LOCKWASHER  
  7D-4025 [2] CLAMP  
  4D-6471 [2] HOUSING ASSEM.  
  0S-1565 [20] BOLT  
  1B-4206 [20] NUT  
  4B-7054 [20] LOCK  
  5F-5434 [2] VENT ASSEM.  
  4D-3967 [2] BUSHING  
  4D-6472 [2] DOWEL  
    (1 IN EACH ASSEM. 4D6471)
  7F-6269 [1] GEAR (RIGHT HAND 42 TEETH)  
  6F-5201 [1] GEAR (LEFT HAND 42 TEETH)  
  4J-6925 [12] STUD  
    (6 IN EACH ASSEM 4D6471)
  1F-2828 [2] BUSHING  
    (1 IN EACH ASSEM. 4D6471)
  3B-8489 [2] FITTING  
  1F-7958 [22] NUT  
  3B-4508 [22] LOCKWASHER  
  4D-6334 [2] GASKET  
  4D-6473 [4] DOWEL  
  3D-0490 [10] STUD  
    (1/2 OF EACH IN EACH ASSEM. 4D6471)
  5B-0841 [4] BOLT  
  6B-6683 [4] NUT  
  3B-4510 [4] LOCKWASHER  
  2B-7410 [4] PLUG  
  7D-4024 [2] CLAMP  
  7D-7602 [2] SHAFT  
  7D-8245 [2] BALL STUD  
    (1 IN EACH ASSEM. 7D7649)
  3B-8489 [2] FITTING  
  5D-8161 [2] PIN  
  5D-8159 [2] PIN ASSEM.  
  7D-7649 [2] ARM ASSEM.  
  0T-0320 [8] BOLT  
  3B-4507 [8] LOCKWASHER  
  8B-3450 [2] CAP  
  3B-8489 [2] FITTING  
  3B-7384 [2] EXTENSION  
  7D-7849 [2] BEARING  
  6D-0392 [2] RETAINER  
  2H-3855 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
  7D-2196 [2] SLEEVE ASSEM.  
  1A-0224 [2] BOLT  
  1B-4208 [2] NUT  
  7D-2476 [2] LINK ASSEM.  
  7D-2135 [2] SOCKET  
    (1 IN EACH 7D2476 ASSEM.)
  6F-6992 [4] CAP  
  7F-1327 [30] SHIM  
  1A-8063 [8] BOLT  
  3B-4512 [8] LOCKWASHER  
 

#UEG0782S0151
 

2D-7836: LIFT GP-BLADE

BLADE LIFT (2D7836 N/S)--Sectional Rear View of Gear Housing--Part 2 of 2
Serial No. 24R531-Up
Note: Quantities shown are those required for both R.H. and L.H. sides
c109485 UEG0782S
2D7836 LIFT GP-BLADE Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0T-0768 [4] BOLT  
  3B-4507 [8] LOCKWASHER  
  5D-9511 [4] DOWEL  
    (2 IN EACH ASSEM. 5D9512)
  3D-9194 [2] GEAR (16 TEETH)  
  4B-7077 [2] GASKET  
  4B-7075 [2] WASHER  
  4D-5998 [2] PINION (15 TEETH)  
  5B-0150 [2] WASHER  
  1F-2369 [2] BUSHING  
    (1 OF EACH IN EACH ASSEM. 2D1262)
  1A-2029 [10] BOLT  
  3B-4506 [6] LOCKWASHER  
  1B-4218 [4] WASHER  
  4D-6337 [4] GASKET  
  2D-1262 [2] HOUSING ASSEM.  
  1F-2834 [2] BUSHING  
    (PART OF ASSEM. 2D1262)
  4D-5997 [2] PINION (14 TEETH)  
  3B-8486 [2] FITTING  
  1K-4706 [2] WASHER  
  4B-7073 [2] SPACER  
  1B-4440 [2] NUT  
  3B-4618 [2] COTTER PIN  
  0L-1017 [2] NUT  
  1A-4749 [2] LOCK  
  1F-2027 [2] BUSHING  
    (1 IN EACH ASSEM. 4B7066)
  1D-5152 [2] GEAR (60 TEETH)  
  6F-0307 [2] KEY  
  2B-7409 [2] PLUG  
  4D-6336 [2] GASKET  
  4H-5128 [2] PIN  
  5D-7339 [2] COUPLING  
  1D-4566 [8] BOLT  
  3B-4508 [16] LOCKWASHER  
  4B-7066 [2] HOUSING ASSEM.  
  0S-1588 [14] BOLT  
  3B-4506 [14] LOCKWASHER  
  1B-5174 [2] PLUG  
  5D-7338 [2] SHAFT  
  5D-4085 [2] BOLT  
  4D-6432 [2] NUT  
  8H-3526 [2] WASHER  
  0T-0270 [2] SPRING  
  1D-5117 [2] NUT  
  3B-4508 [10] LOCKWASHER  
  9B-1006 [2] WASHER  
  1B-8710 [2] KEY  
  5D-3961 [2] BLOCK  
  3B-6966 [4] LINING  
  4K-4114 [2] SEAL  
  5D-3962 [2] BOLT  
  4B-4280 [2] WASHER  
  1F-2733 [2] BEARING  
    (1 IN EACH ASSEM 5D9512)
  5D-3963 [1] SHOE  
  5B-5059 [4] BOLT  
  5D-9512 [2] HOUSING ASSEM.  
  4D-6335 [2] GASKET  
  4D-2132 [2] PLATE  
  0S-1587 [8] BOLT  
  4D-2137 [2] SCREW  
  6F-7058 [2] NUT  
  3H-4025 [2] CAP  
  4D-6335 [2] GASKET  
  4H-7969 [4] BEARING  
  4B-7901 [4] PIN  
  6B-6911 [1] WORM (RIGHT HAND)  
  6B-6912 [1] WORM (LEFT HAND)  
  4B-7064 [2] SHAFT  
 

#UEG0782S0152
 

2G-4186: BEARING ASSEMBLY

2G4186 BEARING ASSEMBLY--Field Installation
c161258 UEG0782S
2G4186 BEARING ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-4187 [1] SHELL  
2. 3D-4718 [2] BEARING  
 

#UEG0782S0153
 

4D-8483: BLADE CYLINDER ASSEMBLY

4D8483 BLADE CYLINDER ASSEMBLY (Change 0-4)--102 mm (4") Bore x 1219 mm (48") Stroke
Part of 7D6630, 7D6620 and 7D6625 Power Blade Arrangements listed on Page 140
c160845 UEG0782S
4D8483 BLADE CYLINDER ASSEMBLY Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5D-6976 [1] PISTON  
  1B-4207 [1] NUT  
  5D-6975 [1] BASE LUG WELD ASSEM.  
  8D-2891 [4] SHAFT  
  1D-4719 [8] NUT  
  2G-5512 C [1] BASE  
  5D-6974 [1] SHAFT AND LUG WELD ASSEM.  
  2G-5511 C [1] HEAD  
  2G-5509 C [1] COVER  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  5D-6977 [1] SEAL KIT  
  C   INDICATES CHANGE
 

#UEG0782S0154
 

7D-6640: BLADE BRACKET GROUP

7D6640 BLADE BRACKET GROUP
Part of 7D6630, 7D6620 and 7D6625 Power Blade Arrangements
listed on Page 140
c109527 UEG0782S
7D6640 BLADE BRACKET GROUP Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1H-4478 [1] PIN  
  6H-0211 [2] WASHER  
  1B-2886 [1] BOLT (3.75" long)  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  5D-0131 [1] BRACKET (Right Hand)  
  6H-1717 [24] BOLT  
  3B-4508 [24] LOCKWASHER  
  5D-0133 [8] PLATE  
  5D-0134 [4] STRIP  
  5D-0132 [1] BRACKET (Left Hand)  
 

#UEG0782S0155
 

7D-6215: HYDRAULIC STEERING GEAR

HYDRAULIC STEERING GEAR (7D6215 N/S)--Side View--Part 1 of 3
Serial No. 11R691 to 11R708 inclusive and 24R531 to 24R537 inclusive
c141384 UEG0782S
7D6215 HYDRAULIC STEERING GEAR Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4D-6679 [1] STEERING WHEEL  
2. 1D-5121 [1] NUT  
  3B-4514 [1] LOCKWASHER  
3. 1B-8714 [3] KEY  
4. 3B-8490 [2] FITTING  
5. 1D-3758 [2] BEARING  
6. 0L-1329 [2] BOLT  
7. 1D-4719 [2] NUT  
8. 3B-4508 [3] LOCKWASHER  
9. 4D-6680 [1] SHAFT  
10. 0S-1748 [2] BOLT  
  1B-4203 [2] NUT  
11. 5B-3529 [1] COLLAR  
12. 4B-3572 [1] SET SCREW  
  1K-3362 [1] COLLAR  
13. 4D-7209 [1] SHAFT  
14. 0S-1604 [1] BOLT  
  1B-4205 [1] NUT  
15. 4B-5231 [1] BRACKET  
16. 0T-0703 [3] BOLT  
17. 3B-4506 [6] LOCKWASHER  
18. 3D-0416 [1] ADJUSTER  
19. 8M-1630 [2] CLAMP  
20. 1B-9575 [2] BOLT  
  1D-4716 [2] NUT  
21. 7S-0451 [1] HOSE ASSEM.  
  9S-0671 H [1] HOSE 9.90"  
  5S-9591 [1] STEM ASSEM.  
  3S-8606 [1] SLEEVE  
22. 0S-1594 [3] BOLT  
23. 2D-9965 [1] BRACKET  
24. 4D-0874 [1] COVER  
  2H-9458 [1] GASKET  
  5F-5442 [4] SCREW  
  H   ORDER BY THE INCH
 

#UEG0782S0156
 

7D-6215: HYDRAULIC STEERING GEAR

HYDRAULIC STEERING GEAR (7D6215 N/S)--Top View--Part 2 of 3
Serial No. 11R691 to 11R708 inclusive and 24R531 to 24R537 inclusive
4J4115 Cylinder, Tank and Pump and 2D2150 Filter parts are shown on Pages 122 and 125
c141385 UEG0782S
7D6215 HYDRAULIC STEERING GEAR Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] TANK AND PUMP  
    (Separate Illustration)
2. 4D-7225 [1] TUBE ASSEM.  
3. 5F-7054 [2] SEAL  
4. 4J-4115 Y [1] CYLINDER GROUP  
    (Separate Illustration)
5. 2D-1076 [2] CLAMP  
6. 0L-1351 [2] BOLT  
7. 3B-4506 [5] LOCKWASHER  
8. 0T-0431 [2] WASHER  
9. 4D-7224 [1] TUBE ASSEM.  
10. 0S-0509 [3] BOLT  
11. 7F-6696 [2] FITTING  
  3H-1833 [2] NUT  
  3H-1834 [2] SLEEVE  
12. 5H-3125 [3] CLAMP  
13. 5D-0061 [1] TUBE ASSEM.  
14. 2D-2238 [1] TUBE  
15. 3F-2953 [1] FITTING  
  3H-1833 [1] NUT  
  3H-1834 [1] SLEEVE  
16. 2A-3223 [1] BOLT  
17. 1B-4205 [1] NUT  
18. 3B-4508 [3] LOCKWASHER  
19. 0S-1595 [2] BOLT  
20. 2D-2150 Y [1] FILTER GROUP  
    (Separate Illustration)
21. 7S-3399 [1] HOSE ASSEM.  
  7S-2369 [1] STEM ASSEM.  
22. 3S-8606 [2] SLEEVE  
23. 9S-0671 H HOSE 17"  
  3S-9454 [1] STEM ASSEM. (Threaded)  
  H   ORDER BY THE INCH
  Y   SEPARATE ILLUSTRATION
 

#UEG0782S0157
 

7D-6215: HYDRAULIC STEERING GEAR

HYDRAULIC STEERING GEAR (7D6215 N/S)--Side View--Part 3 of 3
Serial No. 11R691 to 11R708 inclusive and 24R531 to 24R537 inclusive
4D7215 Gear, 8D1504, 8D1565, 8D2568 and 8D2569 Joint parts are shown on Pages 123, 129 & 130
c140116 UEG0782S
7D6215 HYDRAULIC STEERING GEAR Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-1354 [2] NUT  
2. 3B-4510 [6] LOCKWASHER  
3. 1B-8714 [2] KEY  
4. 8D-7116 C [2] CLAMP  
5. 3B-4505 C [8] LOCKWASHER  
6. 4D-7215 Y [1] GEAR ASSEM.  
    (Separate Illustration)
7. 0S-1625 [4] BOLT  
  1D-4720 [4] NUT  
8. 4D-7213 [1] COUPLING  
9. 7D-7401 [2] NUT  
10. 7D-7387 [1] LOCK  
11. 3D-0403 [1] WASHER  
12. 1P-4574 C [8] FLANGE  
13. 8D-5960 C [1] HOSE ASSEM.  
  9S-0671 H HOSE 29"  
  3S-8618 [1] STEM ASSEM.  
14. 2P-9939 [1] STEM ASSEM. (135 degrees)  
15. 3S-8606 [2] SLEEVE  
16. 7D-7386 [1] SHAFT  
17. 3D-0410 [1] ARM ASSEM.  
18. 3D-4505 [2] BEARING  
19. 1A-4168 [1] NUT  
  3B-4520 [1] LOCKWASHER  
20. 4B-4550 [1] FITTING  
21. 0V-0375 [1] BOLT  
  1D-4719 [1] NUT  
22. 3B-4508 [12] LOCKWASHER  
23. 4D-7358 [1] PIN  
24. 6D-1644 [1] SHAFT  
25. 6K-0545 C [1] NUT  
26. 6D-1599 [1] BLOCK  
27. 3B-8489 [6] FITTING  
28. 3D-0404 [1] WASHER  
29. 1F-1470 [1] CAP  
30. 1B-4438 [1] NUT  
  3B-4622 [1] COTTER PIN  
31. 3D-0444 [2] PIN  
32. 7B-3235 [8] BOLT  
33. 8D-5950 C [1] HOSE ASSEM.  
  9S-0671 H HOSE 32.7"  
34. 3S-8975 [1] STEM ASSEM. (90 degrees)  
35. 3S-8606 [2] SLEEVE  
36. 2P-9939 [1] STEM ASSEM. (135 degrees)  
37. 4B-3388 [24] BOLT  
38. 0S-1579 C [1] BOLT  
39. 5B-1226 C [1] WASHER  
40. 7D-4688 [1] SHAFT ASSEM.  
  7D-4676 [1] SHAFT  
  7D-1983 [1] JOINT ASSEM.  
    Includes:
41. 8D-1504 [1] JOINT ASSEM.  
    -OR-
  8D-1565 Y [1] JOINT ASSEM.  
    (Separate Illustration)
42. 0S-1584 [2] BOLT  
43. 9F-8240 [1] BEARING  
44. 7D-6841 [1] JOINT ASSEM.  
    Includes:
  8D-2568 [1] JOINT ASSEM.  
    -OR-
  8D-2569 Y [1] JOINT ASSEM.  
    (Separate Illustration)
45. 4B-3584 [2] SET SCREW  
46. 4J-5140 [4] SEAL  
47. 7K-1308 C [1] SPACER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#UEG0782S0158
 

7D-6215: HYDRAULIC STEERING GEAR

HYDRAULIC STEERING GEAR (7D6215 N/S)--Side View--Part 1 of 3
Serial No. 11R709-Up and 24R538-Up
c118878 UEG0782S
7D6215 HYDRAULIC STEERING GEAR Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] STEERING WHEEL  
2. [1] NUT  
  [1] LOCKWASHER  
3. [3] KEY  
4. [2] FITTING  
5. [2] BEARING  
6. [2] BOLT  
7. [2] NUT  
8. [3] LOCKWASHER  
9. [1] SHAFT  
10. [2] BOLT  
  [2] NUT  
11. [1] COLLAR  
12. [1] SET SCREW  
  [1] COLLAR  
13. [1] SHAFT  
14. [1] BOLT  
  [1] NUT  
15. [1] BRACKET  
16. [3] BOLT  
17. [6] LOCKWASHER  
18. [1] ADJUSTER  
19. [2] CLAMP  
20. [2] BOLT  
  [2] NUT  
21. [1] HOSE ASSEM.  
  H [1] HOSE 9.90"  
  [1] STEM ASSEM.  
  [1] SLEEVE  
22. [3] BOLT  
23. [1] BRACKET  
24. [1] COVER  
  [1] GASKET  
  [4] SCREW  
  H   ORDER BY THE INCH
 

#UEG0782S0159
 

7D-6215: HYDRAULIC STEERING GEAR

HYDRAULIC STEERING GEAR (7D6215 N/S)--Top View--Part 2 of 3
Serial No. 11R709-Up and 24R538-Up
4J4115 Cylinder, Tank and Pump and 2D2150 Filter parts are shown on Pages 122 and 125
c118879 UEG0782S
7D6215 HYDRAULIC STEERING GEAR Parts scheme
  For full view, you need register

Parts for your 140 MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] TANK AND PUMP  
    (Separate Illustration)
2. 4D-7225 [1] TUBE ASSEM.  
3. 5F-7054 [2] SEAL  
4. 4J-4115 Y [1] CYLINDER GROUP  
    (Separate Illustration)
5. 2D-1076 [2] CLAMP  
6. 0L-1351 [2] BOLT  
7. 3B-4506 [5] LOCKWASHER  
8. 0T-0431 [2] WASHER  
9. 4D-7224 [1] TUBE ASSEM.  
10. 0S-0509 [3] BOLT  
11. 7F-6696 [2] FITTING  
  3H-1833 [2] NUT  
  3H-1834 [2] SLEEVE  
12. 5H-3125 [3] CLAMP  
13. 5D-0061 [1] TUBE ASSEM.  
14. 4S-8387 J TUBE 6 ft  
15. 3F-2953 [1] FITTING  
  3H-1833 [1] NUT  
  3H-1834 [1] SLEEVE  
16. 2A-3223 [1] BOLT  
17. 1B-4205 [1] NUT  
18. 3B-4508 [3] LOCKWASHER  
19. 0S-1595 [2] BOLT  
20. 2D-2150 Y [1] FILTER GROUP  
    (Separate Illustration)
21. 7S-3399 [1] HOSE ASSEM.  
  9S-0671 H HOSE 17 in.  
  3S-9454 [1] STEM ASSEM.  
22. 3S-8606 [2] SLEEVE  
23. 7S-2369 [1] STEM ASSEM.  
24. 3B-6489 C [1] COUPLING  
25. 7S-3389 C [1] HOSE ASSEM.  
  9S-0671 H HOSE 24.3 in.  
26. 3S-8606 [2] SLEEVE  
27. 7S-2369 [2] STEM ASSEM.  
28. 4D-3734 C [1] UNION  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
  J   ORDER BY THE FOOT
 

Information:

Disassembly and Assembly
Blade Lift Arms
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Drive Housings
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS
Blade Assembly
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS
Blade Sideshift Control
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS
Circle Assembly And Blade
NO. 120 & NO. 140 MOTOR GRADERS VEHICLE SYSTEMS
Service Magazine
New End Bits Used On Moldboards {6804}
1992/03/09
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
2011/12/26

Caterpillar Parts SIS Catalog 140 :

2D-7836 LIFT GP-BLADE
LIFT GP-BLADE
2D-7836 LIFT GP-BLADE
7D-6470 VALVE AND LINES GROUP
VALVE AND LINES GROUP
7D-6470 VALVE AND LINES GROUP
7D-6470 VALVE AND LINES GROUP
VALVE AND LINES GROUP
7D-6470 VALVE AND LINES GROUP
CONTROL VALVE ASSEMBLY
7D-3805 CONTROL VALVE ASSEMBLY
VALVE ASSEMBLY
7D-4527 VALVE ASSEMBLY
2D-7836 LIFT GP-BLADE
BEARING ASSEMBLY
2G-4186 BEARING ASSEMBLY
BLADE CYLINDER ASSEMBLY
4D-8483 BLADE CYLINDER ASSEMBLY
BLADE BRACKET GROUP
7D-6640 BLADE BRACKET GROUP
HYDRAULIC STEERING GEAR
7D-6215 HYDRAULIC STEERING GEAR
7D-6215 HYDRAULIC STEERING GEAR
7D-6215 HYDRAULIC STEERING GEAR
HYDRAULIC STEERING GEAR
7D-6215 HYDRAULIC STEERING GEAR

Truck sale:

Caterpillar 140 AWD, motor graders, Construction
425,000 
Caterpillar 140 AWD, motor graders, Construction
- motor graders
HOLT OF CALIFORNIA
Caterpillar 140-13 AWD, motor graders, Construction
500,000 
Caterpillar 140-13 AWD, motor graders, Construction
- motor graders
EMPIRE MACHINERY
Caterpillar H140 S, hammer, Construction
26,318 
Caterpillar H140 S, hammer, Construction
- hammer
HASTINGS DEERING (AUSTRALIA)
Caterpillar 140-15, motor graders, Construction
235,000 
Caterpillar 140-15, motor graders, Construction
- motor graders
NMC
Caterpillar 140-13AWL, motor graders, Construction
377,700 
Caterpillar 140-13AWL, motor graders, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.