AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

14G MOTOR GRADER 96U00001-01097 (MACHINE) IMPLEMENTS Caterpillar SIS



MOTOR GRADER 14G MOTOR GRADER 96U
 14G MOTOR GRADER 96U00001-01097 (MACHINE) UEG0783S 14G 96U   (1973)

Parts group 14G:

  For full view, you need register
IMPLEMENTS
CIRCLE GP
CIRCLE GP
8D-6680 CIRCLE GP
CIRCLE (8D6680 N/S)
8D5919 Circle and Beam parts are shown on Page 104
CIRCLE GP
9D-2425 CIRCLE GP
9D2425 CIRCLE GROUP--Factory Installation
Part of 8D9745 and 8D9750 Blade Control Arrangements
listed on Pages 126A and 126B
CIRCLE ASSEMBLY
9D-4927 CIRCLE ASSEMBLY
9D4927 CIRCLE ASSEMBLY
Part of 9D2425 Circle Group
8D5919 Circle and Beam parts are shown on Page 104
CIRCLE & BEAM AS
8D-5919 CIRCLE & BEAM AS
8D5919 CIRCLE AND BEAM ASSEMBLY
Part of 8D6680 Circle and 9D4927 Circle Assembly shown on Pages 103 and 103B
DRAWBAR GP
DRAWBAR GROUP
9D-2445 DRAWBAR GROUP
9D2445 DRAWBAR GROUP--Part 1 of 2--Factory Installation
Part of 8D9745 and 8D9750 Blade Control Arrangements listed on Pages 126A and 126B
9D2360 Camdrive parts are shown on Pages 98D and 98E
DRAWBAR GROUP
9D-2445 DRAWBAR GROUP
9D2445 DRAWBAR GROUP--Part 2 of 2--Factory Installation
Part of 8D9745 and 8D9750 Blade Control Arrangements listed on Pages 126A and 126B
9D2475 Ball Resolver parts are shown on Page 98F
DRAWBAR GROUP
9D-2445 DRAWBAR GROUP
9D2445 DRAWBAR GROUP--Part 1 of 2--Type 2
Part of 8D9745 and 8D9750 Blade Control Arrangements listed on Pages 126A and 126B
9D2360 Camdrive parts are shown on Pages 98D and 98E
DRAWBAR GROUP
9D-2445 DRAWBAR GROUP
9D2445 DRAWBAR GROUP--Part 2 of 2--Type 2
Part of 8D9745 and 8D9750 Blade Control Arrangements listed on Pages 126A and 126B
9D2475 Resolver parts are shown on Page 98F
DRAWBAR GROUP
8D-5100 DRAWBAR GROUP
8D5100 DRAWBAR GROUP
MOLDBOARD GP
FOLLOWER GP-SHOE
8D-0170 FOLLOWER GP-SHOE
8D170 SKID SHOE FOLLOWER GROUP
Part of 8D9745 and 8D9750 Blade Control Arrangements listed
on Pages 126A and 126B
FOLLOWER GP-WHEEL
8D-9110 FOLLOWER GP-WHEEL
8D9110 WHEEL FOLLOWER GROUP--Type 1
Part of 8D9745 and 8D9750 Blade Control Arrangements listed
on Pages 126A and 126B
FOLLOWER GP-WHEEL
8D-9110 FOLLOWER GP-WHEEL
8D9110 WHEEL FOLLOWER GROUP--Type 2
Part of 8D9745 and 8D9750 Blade Control Arrangements listed
on Pages 126A and 126B
FOLLOWER GP-WIRE
8D-9120 FOLLOWER GP-WIRE
8D9120 WIRE FOLLOWER GROUP--Type 1
Part of 8D9745 and 8D9750 Blade Control Arrangements listed
on Pages 126A and 126B
FOLLOWER GP-WIRE
8D-9120 FOLLOWER GP-WIRE
8D9120 WIRE FOLLOWER GROUP--Type 2
Part of 8D9745 and 8D9750 Blade Control Arrangements listed
on Pages 126A and 126B
MOUNTING GP-GRADE FOLLOWER
8D-9570 MOUNTING GP-GRADE FOLLOWER
8D9570 GRADE FOLLOWER MOUNTING GROUP
Part of 8D9745 Blade Control Arrangement listed on Page 126A
MOUNTING GP-GRADE FOLLOWER
8D-9585 MOUNTING GP-GRADE FOLLOWER
8D9585 GRADE FOLLOWER MOUNTING GROUP
Part of 8D9750 Blade Control Arrangement listed on Page 126B
STORAGE GP-FOLLOW
9D-2440 STORAGE GP-FOLLOW
9D2440 GRADE FOLLOWER STORAGE GROUP
Part of 8D9745 and 8D9750 Blade Control Arrangements listed
on Pages 126A and 126B
PLATE GP
PLATE GP-PUSH
9D-3260 PLATE GP-PUSH
9D3260 PUSH PLATE GROUP
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Service Magazine
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Special Instruction
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Installation of Circle Repair Segments For Certain Motor Graders {6152, 6152}
Specifications
Drive For The Circle
14G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING
Circle Drive and Circle Drive With Slip Clutch Group
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Circle Group
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Reuse And Salvage Guidelines
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Disassembly and Assembly
Circle Drive Lock Check Valve
14G MOTOR GRADER VEHICLE SYSTEMS
Circle
14G MOTOR GRADER VEHICLE SYSTEMS
Circle Drawbar
14G MOTOR GRADER VEHICLE SYSTEMS
Circle Drawbar Bolt
14G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive Motor
14G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive
14G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive Lock Check Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Circle
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Circle Drawbar
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive Motor
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Service Magazine
New Drawbar And Yoke Assembly Has Improved Ball Joint; New Wear Strips Used Between Circle And Drawbar{6153,6154,6155,6170,6171}
1980/08/25
Slip Clutches Now Available On Circle Drive Group{5058,5237,5207,6154}
1981/02/09
New Blade Tip Brackets Used With New Circle And Beam Assembly For Stronger Blade Support{5254,6154}
1981/06/22
6V6037, 6V6038, And 6V6039 Template Available For Installation Of Circle Tooth Segments{0626,6152}
1982/05/10
New Shims Available To Make Drawbar Wear Strips Level{6153}
1982/09/06
New, Narrower Blade Tip Brackets Used{5254,6154}
1982/10/11
Lubrication Of Bronze Alloy Wear Strips Is Not Necessary{6155}
1984/01/30
Replacement Circle Guide Shoes And Bronze Alloy Wear Strips Available For Parts Service{6150,6154,6155}
1984/09/17
Lubrication Of Circle Drive Pinion And Wear Strips; Wear Strip Clearance Adjustment{5207,6155}
1984/11/05
Order The Correct Replacement Parts For Piston Motor Groups In The Circle Drive{5058}
1984/11/19
New Bearings For Circle Beam And Blade Bracket Provide Longer Service Life{6154,5254}
1986/09/08
Hydraulic Motor And Lines Changed For Circle Drive{5050,5200}
1977/04/11
New Drawbar Groups Have Changes To Circle Shoes{6153,6154,6155,6171}
1977/09/12
Hydraulic Motor For Circle Drive Is Changed{5200,5058}
1977/10/10
Correct Adjustment And Lubrication Will Improve Circle Component Life {5207,6154}
1987/08/03
Procedure To Test And Adjust Circle Drive Slip Clutch{5207}
1987/08/10
Back-Up Rings Added To Circle Drive Gerotor Motor Groups{5082}
1987/10/12
One-Piece Wear Strip Is Replacement For Two-Piece Wear Plate And Adjustment Screw On The Moldboard Sideshift{6154,6151}
1978/05/22
Reinforcement Plate Can Be Installed On Circle Drawbar{6153}
1978/09/04
New Method Used To Measure Circle-To-Pinion Clearance{6155}
1988/04/18
Back-Up Rings Made Of Harder Material Are Available For Use In Circle Drive Gerotor Motor Groups {5082}
1988/05/02
New Circle Drive Pinions Have Longer Service Life {5207}
1988/09/26
New Circle Drive Gerotor Motor Groups Provide Higher Torque To Circle Drive {5082}
1988/12/19
Circle Segments Are Now Available To Make Repairs To Circles That Have Cracked Or Broken Teeth{6154}
1979/02/05
More Information About Use Of Shims With New One-Piece Wear Strips In Circle Groups For Hydraulic Sideshift Moldboards{6154,6151}
1979/07/02
Different Cap And Socket For Ball Stud On Circle Drawbar Can Be Used Without Plastic Inserts{6170,6171}
1979/12/17
Items To Check If Excessive Effort Is Required To Operate Circle Drive Motor{5050,5235}
1989/01/30
Circle Repair Segments Available{6152,6154}
1990/04/16
New Circle And Beam Assembly, Circle Drive Group Used{6154,5207,7552}
1991/04/29
Circle Drives Now Use Gear Oil{5207,5200,0645,7555,7561}
1992/03/02
5T2333 Circle Segments Available For Parts Service {6152,6154}
1993/07/05
Circle Drive Unit Cover Can Be Modified To Prevent Oil Loss Through The Vent{5201,5209}
1994/03/07
Ground Body Bolts And Locknuts Improve Retention Of The Aluminum Gear In The Circle Drive Groups {5207}
1995/09/11
Supplement For Special Instruction, "Installation Of Circle Repair Segments"{6154,6152}
1998/07/06
Special Instruction, SEHS7268, "Installation of Circle Repair Segments" Is Now Available {6152, 6154}
2004/05/03
Circle Tooth Profile and the Correct Use of Templates for the Installation of Circle Segments For Certain Motor Graders {6152, 6152}
2012/03/20
Installation of Circle Repair Segments {6152}
2008/03/31
Steel Wear Strips are Available for the Circle Group on Certain Motor Graders {6152, 6154, 6155}
2009/11/16
Steel Wear Strips for the Circle Group May be Modified in Order to Make The Wear Strips Adjustable {6152, 6154, 6155}
2009/11/16
Special Instruction
Modifying Early Drawbars To Accept A Bolt-On Ball{6153, 6157, 6170, 6171}
Modifying Early Drawbars To Accept A Bolt-On Ball{6153, 6157, 6170, 6171}
Installation of 2G7463 and 2G7464 Inserts{6170}
Installation of 2G7463 and 2G7464 Inserts{6170}
Modifications Needed to Install New Drawbar{6153, 6171}
Modifications Needed to Install New Drawbar{6153, 6171}
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Specifications
Drawbar
14G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING
Drawbar Group
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Disassembly and Assembly
Circle Drawbar
14G MOTOR GRADER VEHICLE SYSTEMS
Circle Drawbar Bolt
14G MOTOR GRADER VEHICLE SYSTEMS
Circle Drawbar
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Service Magazine
New Drawbar And Yoke Assembly Has Improved Ball Joint; New Wear Strips Used Between Circle And Drawbar{6153,6154,6155,6170,6171}
1980/08/25
New Shims Available To Make Drawbar Wear Strips Level{6153}
1982/09/06
Steel Wear Strips Available For Motor Grader Blade Rail{6150,6153}
1986/06/02
New Drawbar Groups Have Changes To Circle Shoes{6153,6154,6155,6171}
1977/09/12
Use The Adjustment Procedure That Follows For Later Inserts On Drawbar Ball Stud{6171}
1978/03/20
Reinforcement Plate Can Be Installed On Circle Drawbar{6153}
1978/09/04
New Fittings Give More Clearance Between The Centershift Hydraulic Lines And The Drawbar{5221,7105,5057}
1978/09/04
Different Cap And Socket For Ball Stud On Circle Drawbar Can Be Used Without Plastic Inserts{6170,6171}
1979/12/17
New Specifications For Drawbar Ball Clearance (Prior To Bolt-on Balls) {6170}
1990/03/19
New Specification For Drawbar With Bolt-on Ball{6170,6171}
1992/05/25
Special Instructions SEHS9896, REHS0037 And REHS0038 Available For Installation Of A Bolt-On Ball On Early Drawbars{6153,6157,6170,6171}
1996/11/11
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Specifications
Dust Ejector
3306 VEHICULAR ENGINE
Service Magazine
Exhaust Dust Ejector Operation{1055,1068}
1994/09/26
Recommendations For Replacement Of Tandem Drive Chains{4063}
1980/11/03
Floor Mats To Be Installed By Dealers{7300}
1985/06/17
Specifications
Rear Accessory Drive Gears
3306 VEHICULAR ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Special Instruction
Test Procedure For Automatic Blade Control On Articulated Motor Graders{5216}
Test Procedure For Automatic Blade Control On Articulated Motor Graders{5216}
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Reinforcement Of Motor Grader Circle Shoe Mounting Plates{6150, 6153}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Modification And Installation Of Drawbar And Yoke Assemblies And Installation Of 6G4524 Wear Strips, 6G4525 Wear Strips (Aluminium Bronze) And 6G4526 Circle Shoes{6153, 6155}
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Installation Of Blade Cushion Accumulator Arrangements{5077}
Installation Of Blade Cushion Accumulator Arrangements{5077}
Modifications To Blade Cushion Attachments{5077}
Modifications To Blade Cushion Attachments{5077}
Specifications
Blade Lift Group
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Circle Drive and Circle Drive With Slip Clutch Group
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Circle Group
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Service Magazine
Procedure To Adjust Support Bearing Preload And Gear Backlash (Tooth Clearance) For Bevel Gear And Pinion{3258,3256,3257}
1980/04/14
New Drawbar And Yoke Assembly Has Improved Ball Joint; New Wear Strips Used Between Circle And Drawbar{6153,6154,6155,6170,6171}
1980/08/25
Valve Assembly Used In Centershift Lock Control Group To Prevent Accidental Rotation And Lowering Of Blade{5220,5221,5223,6151}
1980/10/20
Valve Assembly And Nipple Moved From Centershift Lock Control Group To Brake Control Group To Prevent Unauthorized Operation{4282,4267,5220,5221,5223,6151}
1980/11/10
Slip Clutches Now Available On Circle Drive Group{5058,5237,5207,6154}
1981/02/09
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
New Blade Tip Brackets Used With New Circle And Beam Assembly For Stronger Blade Support{5254,6154}
1981/06/22
Replacement Moldboard Rail Sections Are Available{5230,6151}
1981/08/10
Shorter Wiper Blade Prevents Contact With Windshield Seal{7305}
1981/11/23
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
6V6037, 6V6038, And 6V6039 Template Available For Installation Of Circle Tooth Segments{0626,6152}
1982/05/10
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
New, Narrower Blade Tip Brackets Used{5254,6154}
1982/10/11
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Floor Mats To Be Installed By Dealers{7300}
1985/06/17
Improved Adjustment Procedure For Blade Rail Wear Strips{6151,6174}
1985/12/09
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Modification Of Circuitry In 9D6720 Junction Box Prevents Failure Of Automatic Blade Control{5260}
1977/03/21
New Windshield Wiper Group Uses Single Arm Instead Of Double Parallel Arm, And Shorter Blade Arc (Movement){7305}
1977/04/11
Centershift Extension Groups: A Better Method To Cut A Bank Slope At A 2:1 Ratio{5229,6151}
1977/04/11
Hydraulic Motor And Lines Changed For Circle Drive{5050,5200}
1977/04/11
New Accumulator With Improved Piston And Seals Used In Blade Cushion Arrangement And Steering System{5077,5200,4300}
1977/06/20
New Drawbar Groups Have Changes To Circle Shoes{6153,6154,6155,6171}
1977/09/12
Correct Adjustment Of Automatic Blade Control For Accuracy Of Slope Angle Cut In Relation To Slope Control Dial Position{5216}
1977/10/03
One-Piece Wear Strip Is Replacement For Two-Piece Wear Plate And Adjustment Screw On The Moldboard Sideshift{6154,6151}
1978/05/22
New Mounting Pin Assemblies For Blade Tip Cylinder {5106}
1988/11/28
Circle Segments Are Now Available To Make Repairs To Circles That Have Cracked Or Broken Teeth{6154}
1979/02/05
New End Bits Used On Moldboards {6804}
1992/03/09
Thicker Retaining Ring Is Available For Use With CAT® GraderBit Assemblies{6151,6150}
1994/02/14
Circle Drive Unit Cover Can Be Modified To Prevent Oil Loss Through The Vent{5201,5209}
1994/03/07
Hardened Full Length Moldboard Rails Are Available for Parts Service {6151}
2001/09/04
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
6V6037, 6V6038, And 6V6039 Template Available For Installation Of Circle Tooth Segments{0626,6152}
1982/05/10
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Service Magazine
New Seal Kit Available For Hydraulic System Oil Cooler Gear Pumps{5073}
1989/09/11

Truck sale:

Caterpillar 14G
 
Caterpillar 14G
- motor graders
BOYD CAT COMPANY
Caterpillar 14G, motor graders, Construction
46,765 
Caterpillar 14G, motor graders, Construction
- motor graders
FINNING CANADA
Caterpillar 14G, motor graders, Construction
39,880 
Caterpillar 14G, motor graders, Construction
- motor graders
FINNING CANADA
Caterpillar 14G, motor graders, Construction
40,549 
Caterpillar 14G, motor graders, Construction
- motor graders
FINNING CANADA
 
43,900 
Caterpillar 14G, motor graders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.