AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

14G MOTOR GRADER 96U00001-01097 (MACHINE) WORK TOOLS Caterpillar SIS



MOTOR GRADER 14G MOTOR GRADER 96U
 14G MOTOR GRADER 96U00001-01097 (MACHINE) UEG0783S 14G 96U   (1973)

Parts group 14G:

  For full view, you need register
WORK TOOLS
BLADE GP
LIFT GP-BLADE
8D-5970 LIFT GP-BLADE
8D5970 BLADE LIFT GROUP--Part 1
Serial No. 96U1 to 96U973 inclusive
LIFT GP-BLADE
8D-5970 LIFT GP-BLADE
8D5970 BLADE LIFT GROUP--Part 2
Serial No. 96U1 to 96U973 inclusive
LIFT GP-BLADE
8D-5970 LIFT GP-BLADE
8D5970 BLADE LIFT GROUP--Part 1
Serial No. 96U974-Up
LIFT GP-BLADE
8D-5970 LIFT GP-BLADE
8D5970 BLADE LIFT GROUP--Part 2
Serial No. 96U974-Up
STABILIZER GP
9D-3845 STABILIZER GP
9D3845 STABILIZER GROUP
Part of 8D9745 and 8D9750 Blade Control Arrangements listed on Pages 126A and 126B
BLADE GP
9D-1790 BLADE GP
9D1790 BLADE GROUP--14 Foot
BLADE GP
9D-2405 BLADE GP
9D2405 BLADE GROUP--14 Foot--Type 1
Part of 8D9745 Blade Control Arrangement listed on Page 126A
BLADE GP
9D-2405 BLADE GP
9D2405 BLADE GROUP--14 Foot--Type 2
Part of 8D9745 Blade Control Arrangement listed on Page 126A
BLADE GP
9D-2410 BLADE GP
9D2410 BLADE GROUP--16 Foot--Type 1
Part of 8D9750 Blade Control Arrangement listed on Page 126B
BLADE GP
9D-2410 BLADE GP
9D2410 BLADE GROUP--16 Foot--Type 2
Part of 8D9750 Blade Control Arrangement listed on Page 126B
BLADE GP
9D-1780 BLADE GP
9D1780 BLADE GROUP--16 Foot
BLADE EXTENSION GROUP
2G-6075 BLADE EXTENSION GROUP
2G6075 BLADE EXTENSION GROUP--R.H.--2 Foot
AN ATTACHMENT
BLADE EXTENSION GROUP
2G-6085 BLADE EXTENSION GROUP
2G6085 BLADE EXTENSION GROUP--L.H.--2 Foot
AN ATTACHMENT
GROUND ENGAGING TOOLS (G.E.T.)
9D-2160 EDGE GP-CUTTING
9D2160 CUTTING EDGE REPLACEMENT GROUP--CURVED 16 FOOT--.75" THICK
X 8.00" WIDE
AN ATTACHMENT
9D-2170 EDGE GP-CUTTING
9D2170 CUTTING EDGE REPLACEMENT GROUP--CURVED 14 FOOT--.75" THICK
X 8.00" WIDE
AN ATTACHMENT
TOOTH GP-SCARIFIER
8J-1434 TOOTH GP-SCARIFIER
8J1434 TOOTH GROUP
Serial No. 39V1 to 39V545 inclusive
Also part of 9J908 Ripper Arrangement shown on Page 179
TOOTH GP-SCARIFIER
8J-1434 TOOTH GP-SCARIFIER
8J1434 TOOTH GROUP
Serial No. 39V546-Up
Also part of 9J908 Ripper Arrangement shown on Page 179
RIPPER GP
9J-0907 RIPPER AR
9J907 14G RIPPER ARRANGEMENT
AN ATTACHMENT
RIPPER AR-3 SHANK
9J-0908 RIPPER AR-3 SHANK
9J908 BASIC RIPPER ARRANGEMENT
Serial No. 39V1-Up
Part of 9J907 Ripper Arrangement. 8J1434 Tooth parts are shown on Pages 180 and 180A
NOTE: One or two 8J1434 Tooth Groups may be added to convert to a 4 or 5 Tooth Ripper
MOUNTING GP-RIPPER
8J-6628 MOUNTING GP-RIPPER
8J6628 RIPPER MOUNTING GROUP
Part of 9J907 Ripper Arrangement listed on Page 178

Information:

(For parts list, see above)

Special Instruction
Modifying Early Drawbars To Accept A Bolt-On Ball{6153, 6157, 6170, 6171}
Modifying Early Drawbars To Accept A Bolt-On Ball{6153, 6157, 6170, 6171}
Test Procedure For Automatic Blade Control On Articulated Motor Graders{5216}
Test Procedure For Automatic Blade Control On Articulated Motor Graders{5216}
Installation of 8W2408 Blade Float Arrangement{5241}
Installation of 8W2408 Blade Float Arrangement{5241}
Installation Of 2G6820, 2G6830, 2G6840 And 2G6850 Sideshift Extension Groups{5227}
Installation Of 2G6820, 2G6830, 2G6840 And 2G6850 Sideshift Extension Groups{5227}
Installation Of Blade Cushion Accumulator Arrangements{5077}
Installation Of Blade Cushion Accumulator Arrangements{5077}
Modifications To Blade Cushion Attachments{5077}
Modifications To Blade Cushion Attachments{5077}
Specifications
Blade Tip
14G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING
Centershift And Blade Lift
14G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING
Blade Lift Group
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Reuse And Salvage Guidelines
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Disassembly and Assembly
Blade Sideshift Lock Check Valve
14G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Lock Check And Relief Valve, Blade Tip Lock Check Valve
14G MOTOR GRADER VEHICLE SYSTEMS
Articulation Lock Check Valve, Blade Lift Lock Check Valve
14G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Lock Check And Relief Valve
14G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Cylinders
14G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Arms
14G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Bar
14G MOTOR GRADER VEHICLE SYSTEMS
Blade Sideshift Cylinder
14G MOTOR GRADER VEHICLE SYSTEMS
Blade Tip Cylinders
14G MOTOR GRADER VEHICLE SYSTEMS
Blade
14G MOTOR GRADER VEHICLE SYSTEMS
Blade Assembly
14G MOTOR GRADER VEHICLE SYSTEMS
Blade Cushion Accumulator
14G MOTOR GRADER VEHICLE SYSTEMS
Blade Sideshift Lock Check Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Lock Check And Relief Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Lock Check Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Tip Lock Check Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Lock Check And Relief Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Cylinders
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Arms
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Bar
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Sideshift Cylinder
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Centershift Cylinder
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Tip Cylinder
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Blade Assembly
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Service Magazine
Valve Assembly Used In Centershift Lock Control Group To Prevent Accidental Rotation And Lowering Of Blade{5220,5221,5223,6151}
1980/10/20
Valve Assembly And Nipple Moved From Centershift Lock Control Group To Brake Control Group To Prevent Unauthorized Operation{4282,4267,5220,5221,5223,6151}
1980/11/10
New Blade Tip Brackets Used With New Circle And Beam Assembly For Stronger Blade Support{5254,6154}
1981/06/22
Replacement Moldboard Rail Sections Are Available{5230,6151}
1981/08/10
Shorter Wiper Blade Prevents Contact With Windshield Seal{7305}
1981/11/23
Correct Position Of Shims In Blade Lift And Centershift Cylinder Groups{5102,5223}
1982/04/12
New, Narrower Blade Tip Brackets Used{5254,6154}
1982/10/11
New Wear Strips For Moldboard Rail Will Increase Service Life Of The Rail{5230}
1984/03/12
New Control Valve Group Lets Blade Tip Forward Or Backward At Same Speed {5106}
1984/06/25
Improved Adjustment Procedure For Blade Rail Wear Strips{6151,6174}
1985/12/09
Steel Wear Strips Available For Motor Grader Blade Rail{6150,6153}
1986/06/02
New Bearings For Circle Beam And Blade Bracket Provide Longer Service Life{6154,5254}
1986/09/08
Modification Of Circuitry In 9D6720 Junction Box Prevents Failure Of Automatic Blade Control{5260}
1977/03/21
New Windshield Wiper Group Uses Single Arm Instead Of Double Parallel Arm, And Shorter Blade Arc (Movement){7305}
1977/04/11
Centershift Extension Groups: A Better Method To Cut A Bank Slope At A 2:1 Ratio{5229,6151}
1977/04/11
New Accumulator With Improved Piston And Seals Used In Blade Cushion Arrangement And Steering System{5077,5200,4300}
1977/06/20
Correct Adjustment Of Automatic Blade Control For Accuracy Of Slope Angle Cut In Relation To Slope Control Dial Position{5216}
1977/10/03
New Bearing Used In Blade Tip Brackets; Different Moldboard Pivot Shafts Used {5254,6151}
1978/04/17
One-Piece Wear Strip Is Replacement For Two-Piece Wear Plate And Adjustment Screw On The Moldboard Sideshift{6154,6151}
1978/05/22
Changes Can Be Made To Improve Blade Cushion Arrangement{5200,6150,5077}
1978/12/04
Modification To Make The Snow Wing And/Or Blade Sideshift Move Faster{5227,6150}
1988/04/18
New Mounting Pin Assemblies For Blade Tip Cylinder {5106}
1988/11/28
New Blade Lift And Centershift Cylinders Have Caps With Shims For Adjustment{5102,5223}
1979/03/12
Adjustment Procedure For Blade Lift Cylinders And Centershift Cylinders{5223,5102}
1979/03/26
More Information About Use Of Shims With New One-Piece Wear Strips In Circle Groups For Hydraulic Sideshift Moldboards{6154,6151}
1979/07/02
During Predelivery, Make Sure Nitrogen Charge Pressure Is Correct In Blade Cushion Accumulators{5077}
1989/10/16
Steel Wear Strips Can Be Modified To Make Them Adjustable {6151}
1990/02/05
New End Bits Used On Moldboards {6804}
1992/03/09
Lock Group Available For Plow/Dozer On Motor Graders Equipped With Load Sensing Hydraulics {5116,5100}
1993/01/18
New Blade Lift Valves Used For Easier Addition Of Valve Sections To The Valve Group {5051}
1993/10/04
Thicker Retaining Ring Is Available For Use With CAT® GraderBit Assemblies{6151,6150}
1994/02/14
Special Instructions SEHS9896, REHS0037 And REHS0038 Available For Installation Of A Bolt-On Ball On Early Drawbars{6153,6157,6170,6171}
1996/11/11
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Hardened Full Length Moldboard Rails Are Available for Parts Service {6151}
2001/09/04
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Special Instruction
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
Procedure To Adjust Support Bearing Preload And Gear Backlash (Tooth Clearance) For Bevel Gear And Pinion{3258,3256,3257}
1980/04/14
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V6037, 6V6038, And 6V6039 Template Available For Installation Of Circle Tooth Segments{0626,6152}
1982/05/10
Circle Segments Are Now Available To Make Repairs To Circles That Have Cracked Or Broken Teeth{6154}
1979/02/05
New Heavy-Duty Ripper Shank And Tips Available {6808,6810}
1989/05/08
New End Bits Used On Moldboards {6804}
1992/03/09
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
New Adapters for the Moldboard are Now Available on Certain Motor Graders {6174, 6801, 6804}
2015/02/05
Special Instruction
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Specifications
Mounting For Ripper
14G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING
Service Magazine
Stronger Ripper Cylinder{5352,6164}
1977/07/11
New Heavy-Duty Ripper Shank And Tips Available {6808,6810}
1989/05/08
Special Instruction
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Truck sale:

Caterpillar 14G
 
Caterpillar 14G
- motor graders
BOYD CAT COMPANY
Caterpillar 14G, motor graders, Construction
46,765 
Caterpillar 14G, motor graders, Construction
- motor graders
FINNING CANADA
Caterpillar 14G, motor graders, Construction
39,880 
Caterpillar 14G, motor graders, Construction
- motor graders
FINNING CANADA
Caterpillar 14G, motor graders, Construction
40,549 
Caterpillar 14G, motor graders, Construction
- motor graders
FINNING CANADA
 
43,900 
Caterpillar 14G, motor graders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.