AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

PUMP DRIVE (8D5000 N/S) 8D3259 Joint parts are shown on Page 147 14G MOTOR GRADER


HYDRAULIC SYSTEM
DRIVE GP
LINES GP-PUMP

MOTOR GRADER 14G MOTOR GRADER 96U
 14G MOTOR GRADER 96U00001-01097 (MACHINE) UEG0783S 14G 96U   (1973)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE GP-CIRCLE
9D-5890 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
9D-5890 DRIVE GP-CIRCLE
DRIVE GP-PUMP
8D-5000 DRIVE GP-PUMP
 

#UEG0783S0310
 

8D-5000: DRIVE GP-PUMP

PUMP DRIVE (8D5000 N/S)
8D3259 Joint parts are shown on Page 147
c119471 UEG0783S
8D5000 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-0947 [4] BOLT  
2. 8D-3259 Y [1] JOINT GROUP  
    (Separate Illustration)
3. 0S-0484 [4] BOLT  
4. 8D-4578 [1] YOKE  
5. 1B-8741 [1] KEY  
6. 8B-1002 [1] NUT  
  8D-4968 [1] WASHER  
  3B-4622 [1] COTTER PIN  
  Y   SEPARATE ILLUSTRATION
 

#UEG0783S0311
 

8D-7650: LINES GP-HYDRAULIC PUMP

PUMP LINES (8D7650 N/S)--Part 1 of 3
Serial No. 96U1 to 809, 820 and 96U821 inclusive
c167377 UEG0783S
8D7650 LINES GP-HYDRAULIC PUMP Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-4975 [2] HOSE  
2. 5P-2230 C [4] CLAMP  
3. 8D-6774 [1] TUBE ASSEM.  
4. 030-7935 [1] CONNECTOR  
  7M-8485 [1] SEAL  
5. 0S-1594 [3] BOLT  
  4B-4278 [3] WASHER  
6. 3B-4506 [6] LOCKWASHER  
7. 8D-6811 [1] PLATE  
8. 3B-1915 [3] BOLT  
  0L-1319 [3] WASHER  
  1P-7115 [3] GROMMET ASSEM.  
9. 005-4362 [1] ELBOW  
10. 3K-0360 [3] SEAL  
11. 2R-6276 [1] CONNECTOR  
12. 3D-2824 [6] SEAL  
13. 9D-1607 [1] TUBE ASSEM.  
14. 9D-5898 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 72 cm(28.34 in.)  
  8S-3759 [2] COUPLING ASSEM.  
  3S-7166 [2] SLEEVE  
15. 9D-1681 [1] TUBE ASSEM.  
16. 030-7943 [2] ELBOW  
17. 9D-0884 [1] CONNECTOR  
18. 030-7936 [1] CONNECTOR  
19. 3J-1907 [2] SEAL  
20. 030-7944 [3] ELBOW  
21. 2R-6806 [1] CONNECTOR  
22. 9D-5903 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 71 cm(27.95 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
23. 030-7950 [1] ELBOW  
24. 9D-5913 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 73 cm(28.74 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
25. 9D-5899 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 82 cm(32.28 in.)  
  8S-3759 [2] COUPLING ASSEM.  
  3S-7166 [2] SLEEVE  
26. 9D-5912 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 61 cm(24.01 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
27. 9D-5907 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 42 cm(16.53 in.)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
28. 8D-9918 [1] PLATE ASSEM.  
29. 9F-2978 [2] NUT  
30. 9D-6063 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 85 cm(33.46 in.)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0783S0312
 

8D-7650: LINES GP-HYDRAULIC PUMP

PUMP LINES (8D7650 N/S)--Part 2 of 3
Serial No. 96U1 to 809, 820, and 96U821 inclusive
9J3469 Valve parts are shown on Page 152
c148938 UEG0783S
8D7650 LINES GP-HYDRAULIC PUMP Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-3607 [2] CONNECTOR  
2. 2M-9780 [3] SEAL  
3. 4S-1962 [12] CLIP  
4. 0L-1351 [7] BOLT  
5. 3B-4506 [7] LOCKWASHER  
6. 9D-5909 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 465 cm(183.07 in.)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
7. 9D-5908 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 419 cm(164.96 in.)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
8. 8M-0505 [3] CONNECTOR  
  3K-0360 [3] SEAL  
9. 4S-6797 [1] CONNECTOR  
  2S-4078 [1] SEAL  
10. 9D-5914 [1] HOSE ASSEM.  
    For service furnish:
  5P-0181 H HOSE 45 cm(17.71 in.)  
  1P-9589 [1] COUPLING ASSEM. (90 degrees)  
  3S-7252 [2] SLEEVE  
  8S-3918 [1] COUPLING ASSEM. (straight)  
11. 9S-9334 [1] PLUG  
12. 030-7935 [2] CONNECTOR  
13. 9D-5915 [1] HOSE ASSEM.  
    For service furnish:
  5P-0181 H HOSE 54 cm(21.25 in.)  
  8K-5114 [2] COUPLING ASSEM.  
  3S-7252 [2] SLEEVE  
14. 9D-9284 C [1] PIN (large)  
15. 4J-5325 [1] PIN (small)  
16. 3B-4607 [1] COTTER PIN  
17. 030-7945 [1] ELBOW  
18. 7M-8485 [4] SEAL  
19. 005-4173 [1] ELBOW  
20. 0T-0319 [3] BOLT  
  2H-3920 C [3] LOCKWASHER  
  8D-7185 [3] WASHER  
  8D-0983 [3] MOUNTING  
21. 9D-6361 [1] PLATE ASSEM.  
22. 9J-3469 Y [1] VALVE GROUP  
    (Separate Illustration)
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0783S0313
 

8D-7650: LINES GP-HYDRAULIC PUMP

PUMP LINES (8D7650 N/S)--Part 3 of 3
Serial No. 96U1 to 809, 820 and 96U821 inclusive
8J2011 Valve parts are shown on Page 152
c153675 UEG0783S
8D7650 LINES GP-HYDRAULIC PUMP Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-1915 [3] BOLT  
  0L-1319 [6] WASHER  
  1P-7115 [3] GROMMET ASSEM.  
2. 3B-4506 [5] LOCKWASHER  
3. 0T-0573 [2] BOLT  
4. 8J-2011 Y [1] VALVE GROUP  
    (Separate Illustration)
5. 2R-6276 C [1] CONNECTOR  
6. 3D-2824 [5] SEAL  
7. 9D-5902 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 56 cm(22.04 in.)  
  8S-3759 [2] COUPLING ASSEM.  
  3S-7166 [2] SLEEVE  
8. 9D-5992 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 55 cm(21.65 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
9. 030-8188 [2] CONNECTOR  
10. 9D-5901 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 52 cm(20.47 in.)  
  8S-3759 [2] COUPLING ASSEM.  
  3S-7166 [2] SLEEVE  
11. 9D-5904 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 92 cm(36.22 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  8S-6392 [1] COUPLING ASSEM.  
12. 030-7965 C [1] ELBOW  
13. 7D-9984 [1] ELBOW  
14. 3K-0360 [5] SEAL  
15. 9D-6669 [1] BLOCK  
16. 9S-4185 [1] PLUG  
17. 9S-8008 [1] PLUG  
18. 8D-5381 [1] HOSE  
19. 5P-0598 [2] CLAMP  
20. 8D-7578 [1] TUBE ASSEM.  
21. 0S-1587 [4] BOLT  
22. 3B-4508 [8] LOCKWASHER  
23. 8S-4107 [1] FLANGE  
  5H-8848 [1] SEAL  
24. 030-7935 [1] CONNECTOR  
  7M-8485 [1] SEAL  
25. 8D-9506 [1] TUBE ASSEM.  
26. 8M-0505 [2] CONNECTOR  
27. 9D-6998 [1] ADAPTER  
  4J-0522 [1] SEAL  
28. 061-9258 [1] TEE  
29. 030-3978 [1] CONNECTOR  
  3J-7354 [1] SEAL  
30. 9D-5906 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 54 cm(21.25 in.)  
  8S-6391 [1] COUPLING ASSEM. (straight)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (90 degrees)  
31. 1D-4566 [4] BOLT  
32. 030-7947 [1] ELBOW  
33. 8F-4197 [2] BOLT 5.50 in.(1.40 dm) long  
  7H-3472 [2] BOLT 4.75 in.(1.21 dm) long  
  3B-4507 [4] LOCKWASHER  
34. 8D-6124 [1] TUBE ASSEM.  
  8D-6128 [1] GASKET  
35. 9D-0884 [1] CONNECTOR  
36. 030-7936 [1] CONNECTOR  
37. 3J-1907 [3] SEAL  
38. 2R-6806 [1] CONNECTOR  
39. 030-7944 C [2] ELBOW  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0783S0314
 

8D-7650: LINES GP-HYDRAULIC PUMP

PUMP LINES (8D7650 N/S)--Part 1 of 3
Serial No. 96U810 to 96U819 and 96U822 to 96U886 inclusive
c167377 UEG0783S
8D7650 LINES GP-HYDRAULIC PUMP Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-4975 [2] HOSE  
2. 5P-2230 C [4] CLAMP  
3. 8D-6774 [1] TUBE ASSEM.  
4. 030-7935 [1] CONNECTOR  
  7M-8485 [1] SEAL  
5. 0S-1594 [3] BOLT  
  4B-4278 [3] WASHER  
6. 3B-4506 [6] LOCKWASHER  
7. 8D-6811 [1] PLATE  
8. 3B-1915 [3] BOLT  
  0L-1319 [3] WASHER  
  1P-7115 [3] GROMMET ASSEM.  
9. 005-4362 [1] ELBOW  
10. 3K-0360 [3] SEAL  
11. 2R-6276 [1] CONNECTOR  
12. 3D-2824 [6] SEAL  
13. 9D-1607 [1] TUBE ASSEM.  
14. 9D-5898 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 72 cm(28.34 in.)  
  8S-3759 [2] COUPLING ASSEM.  
  3S-7166 [2] SLEEVE  
15. 9D-1681 [1] TUBE ASSEM.  
16. 030-7943 [2] ELBOW  
17. 9D-0884 [1] CONNECTOR  
18. 030-7936 [1] CONNECTOR  
19. 3J-1907 [2] SEAL  
20. 030-7944 [3] ELBOW  
21. 2R-6806 [1] CONNECTOR  
22. 9D-5903 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 71 cm(27.95 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
23. 030-7950 [1] ELBOW  
24. 9D-5913 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 73 cm(28.74 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
25. 9D-5899 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 82 cm(32.28 in.)  
  8S-3759 [2] COUPLING ASSEM.  
  3S-7166 [2] SLEEVE  
26. 9D-5912 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 61 cm(24.01 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
27. 9D-5907 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 42 cm(16.53 in.)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
28. 8D-9918 [1] PLATE ASSEM.  
29. 9F-2978 [2] NUT  
30. 9D-6063 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 85 cm(33.46 in.)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0783S0315
 

8D-7650: LINES GP-HYDRAULIC PUMP

PUMP LINES (8D7650 N/S)--Part 2 of 3
Serial No. 96U810 to 96U819 and 96U822 to 96U886 inclusive
9J3469 Valve parts are shown on Page 152
c153676 UEG0783S
8D7650 LINES GP-HYDRAULIC PUMP Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-3607 [2] CONNECTOR  
2. 2M-9780 [3] SEAL  
3. 4S-1962 [12] CLIP  
4. 0L-1351 [7] BOLT  
5. 3B-4506 [7] LOCKWASHER  
6. 9D-6062 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  H HOSE 467 cm(184 in.)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
7. 9D-5908 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 419 cm(164.96 in.)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
8. 8M-0505 [3] CONNECTOR  
  3K-0360 [3] SEAL  
9. 4S-6797 [1] CONNECTOR  
  2S-4078 [1] SEAL  
10. 9D-5914 [1] HOSE ASSEM.  
    For service furnish:
  5P-0181 H HOSE 45 cm(17.71 in.)  
  1P-9589 [1] COUPLING ASSEM. (90 degrees)  
  3S-7252 [2] SLEEVE  
  8S-3918 [1] COUPLING ASSEM. (straight)  
11. 9S-9334 [1] PLUG  
12. 030-7935 [2] CONNECTOR  
13. 9D-5915 [1] HOSE ASSEM.  
    For service furnish:
  5P-0181 H HOSE 54 cm(21.25 in.)  
  8K-5114 [2] COUPLING ASSEM.  
  3S-7252 [2] SLEEVE  
14. 9D-9284 [1] PIN (large)  
15. 4J-5325 [1] PIN (small)  
16. 3B-4607 [1] COTTER PIN  
17. 030-7945 [1] ELBOW  
18. 7M-8485 [4] SEAL  
19. 005-4173 [1] ELBOW  
20. 0T-0319 [3] BOLT  
  2H-3920 [3] LOCKWASHER  
  8D-7185 [3] WASHER  
  8D-0983 [3] MOUNTING  
21. 9D-6361 [1] PLATE ASSEM.  
22. 9J-3469 Y [1] VALVE GROUP  
    (Separate Illustration)
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0783S0316
 

8D-7650: LINES GP-HYDRAULIC PUMP

PUMP LINES (8D7650 N/S)--Part 3 of 3
Serial No. 96U810 to 96U819 and 96U822 to 96U886 inclusive
8J2011 Valve parts are shown on Page 152
c153677 UEG0783S
8D7650 LINES GP-HYDRAULIC PUMP Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-1915 [3] BOLT  
  0L-1319 [6] WASHER  
  1P-7115 [3] GROMMET ASSEM.  
2. 3B-4506 [5] LOCKWASHER  
3. 0T-0573 [2] BOLT  
4. 8J-2011 Y [1] VALVE GROUP  
    (Separate Illustration)
5. 2R-6276 [1] CONNECTOR  
6. 3D-2824 [5] SEAL  
7. 9D-5902 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 56 cm(22.04 in.)  
  8S-3759 [2] COUPLING ASSEM.  
  3S-7166 [2] SLEEVE  
8. 9D-5992 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 55 cm(21.65 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
9. 030-8188 [2] CONNECTOR  
10. 9D-8557 C [1] HOSE ASSEM. (notserv)  
    For service furnish:
  5P-0180 H HOSE 55 cm(21.7 in.)  
  8S-3759 [1] COUPLING ASSEM.  
  3S-7166 [2] SLEEVE  
  9S-9726 [1] COUPLING ASSEM.  
11. 9D-5904 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 92 cm(36.22 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  8S-6392 [1] COUPLING ASSEM.  
13. 7D-9984 [1] ELBOW  
14. 3K-0360 [5] SEAL  
15. 9D-6669 [1] BLOCK  
16. 9S-4185 [1] PLUG  
17. 9S-8008 [1] PLUG  
18. 8D-5381 [1] HOSE  
19. 5P-0598 [2] CLAMP  
20. 8D-7578 [1] TUBE ASSEM.  
21. 0S-1587 [4] BOLT  
22. 3B-4508 [8] LOCKWASHER  
23. 8S-4107 [1] FLANGE  
  5H-8848 [1] SEAL  
24. 030-7935 [1] CONNECTOR  
  7M-8485 [1] SEAL  
25. 8D-9506 [1] TUBE ASSEM.  
26. 8M-0505 [2] CONNECTOR  
27. 9D-6998 [1] ADAPTER  
  4J-0522 [1] SEAL  
28. 061-9258 [1] TEE  
29. 030-3978 [1] CONNECTOR  
  3J-7354 [1] SEAL  
30. 9D-6061 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 55 cm(21.7 in.)  
  8S-6391 [1] COUPLING ASSEM. (straight)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (90 degrees)  
31. 1D-4566 [4] BOLT  
32. 030-7942 C [1] ELBOW  
33. 8F-4197 [2] BOLT 5.50 in. (1.40 dm) long  
  7H-3472 [2] BOLT 4.75 in. (1.21 dm) long  
  3B-4507 [4] LOCKWASHER  
34. 2G-1023 C [1] ADAPTER  
  8D-6128 [1] GASKET  
35. 9D-0884 [1] CONNECTOR  
36. 030-7936 [1] CONNECTOR  
37. 3J-1907 [3] SEAL  
38. 2R-6806 [1] CONNECTOR  
39. 030-7944 [2] ELBOW  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0783S0317
 

8D-7650: LINES GP-HYDRAULIC PUMP

PUMP LINES (8D7650 N/S)--Part 1 of 3
Serial No. 96U887-Up
c167377 UEG0783S
8D7650 LINES GP-HYDRAULIC PUMP Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-4975 [2] HOSE  
2. 5P-2230 C [4] CLAMP  
3. 8D-6774 [1] TUBE ASSEM.  
4. 030-7935 [1] CONNECTOR  
  7M-8485 [1] SEAL  
5. 0S-1594 [3] BOLT  
  4B-4278 [3] WASHER  
6. 3B-4506 [6] LOCKWASHER  
7. 8D-6811 [1] PLATE  
8. 3B-1915 [3] BOLT  
  0L-1319 [3] WASHER  
  1P-7115 [3] GROMMET ASSEM.  
9. 005-4362 [1] ELBOW  
10. 3K-0360 [3] SEAL  
11. 2R-6276 [1] CONNECTOR  
12. 3D-2824 [6] SEAL  
13. 9D-1607 [1] TUBE ASSEM.  
14. 9D-5898 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 72 cm(28.34 in.)  
  8S-3759 [2] COUPLING ASSEM.  
  3S-7166 [2] SLEEVE  
15. 9D-1681 [1] TUBE ASSEM.  
16. 030-7943 [2] ELBOW  
17. 9D-0884 [1] CONNECTOR  
18. 030-7936 [1] CONNECTOR  
19. 3J-1907 [2] SEAL  
20. 030-7944 [3] ELBOW  
21. 2R-6806 [1] CONNECTOR  
22. 9D-5903 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 71 cm(27.95 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6392 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
23. 030-7950 [1] ELBOW  
24. 9D-5913 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 73 cm(28.74 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
25. 9D-5899 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 82 cm(32.28 in.)  
  8S-3759 [2] COUPLING ASSEM.  
  3S-7166 [2] SLEEVE  
26. 9D-5912 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 61 cm(24.01 in.)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  4S-5414 [2] SLEEVE  
27. 9D-5907 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 42 cm(16.53 in.)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
28. 8D-9918 [1] PLATE ASSEM.  
29. 9F-2978 [2] NUT  
30. 9D-6063 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 85 cm(33.46 in.)  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  C   INDICATES CHANGE
  H   ORDER BY THE CENTIMETRE
 

#UEG0783S0318
 

8D-7650: LINES GP-HYDRAULIC PUMP

PUMP LINES (8D7650 N/S)--Part 2 of 3
Serial No. 96U887-Up
9J3469 Valve parts are shown on Pages 152 and 152A
c155051 UEG0783S
8D7650 LINES GP-HYDRAULIC PUMP Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6K-3607 [2] CONNECTOR  
2. 2M-9780 [3] SEAL  
3. 4S-1962 [12] CLIP  
4. 0L-1351 [7] BOLT  
5. 3B-4506 [7] LOCKWASHER  
6. 9D-6062 C [1] HOSE ASSEM. (not serv)  
    For service furnish:
  H HOSE 467 cm(184 in.)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
7. 9D-5908 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 419 cm(164.96 in.)  
  8S-4055 [1] COUPLING ASSEM. (straight)  
  3S-8606 [2] SLEEVE  
  8S-6391 [1] COUPLING ASSEM. (90 degrees)  
8. 8M-0505 [3] CONNECTOR  
  3K-0360 [3] SEAL  
9. 4S-6797 [1] CONNECTOR  
  2S-4078 [1] SEAL  
10. 9D-5914 [1] HOSE ASSEM.  
    For service furnish:
  5P-0181 H HOSE 45 cm(17.71 in.)  
  1P-9589 [1] COUPLING ASSEM. (90 degrees)  
  3S-7252 [2] SLEEVE  
  8S-3918 [1] COUPLING ASSEM. (straight)  
11. 9S-8008 C [1] PLUG  
12. 030-7935 [2] CONNECTOR  
13. 9D-5915 [1] HOSE ASSEM.  
    For service furnish:
  5P-0181 H HOSE 54 cm(21.25 in.)  
  8K-5114 [2] COUPLING ASSEM.  
  3S-7252 [2] SLEEVE  
14. 9D-9284 [1] PIN (large)  
15. 4J-5325 [1] PIN (small)  
16. 3B-4607 [1] COTTER PIN  
17. 030-7945 [1] ELBOW  
18. 7M-8485 C [3] SEAL  
19. 005-4173 [1] ELBOW  
20. 0T-0319 [3] BOLT  
  2H-3920 [3] LOCKWASHER  
  8D-7185 [3] WASHER  
  8D-0983 [3] MOUNTING  
21. 9D-6361 [1] PLATE ASSEM.  
22. 9J-3469 Y [1] VALVE GROUP  
    (Separate Illustration)
23. 3D-2824 C [1] SEAL  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0783S0319
 

8D-7650: LINES GP-HYDRAULIC PUMP

PUMP LINES (8D7650 N/S)--Part 3 of 3
Serial No. 96U887-Up
8J2011 Valve parts are shown on Page 152
c155052 UEG0783S
8D7650 LINES GP-HYDRAULIC PUMP Parts scheme
  For full view, you need register

Parts for your 14G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-1915 [3] BOLT  
  0L-1319 [6] WASHER  
  1P-7115 [3] GROMMET ASSEM.  
2. 3B-4506 [5] LOCKWASHER  
3. 0T-0573 [2] BOLT  
4. 8J-2011 Y [1] VALVE GROUP  
    (Separate Illustration)
5. 2R-6276 [1] CONNECTOR  
6. 3D-2824 [5] SEAL  
7. 9D-5902 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 56 cm(22.04 in.)  
  8S-3759 [2] COUPLING ASSEM.  
  3S-7166 [2] SLEEVE  
8. 9D-5992 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 55 cm(21.65 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
9. 030-8188 [2] CONNECTOR  
10. 9D-8557 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0180 H HOSE 55 cm(21.7 in.)  
  8S-3759 [1] COUPLING ASSEM.  
  3S-7166 [2] SLEEVE  
  9S-9726 [1] COUPLING ASSEM.  
11. 9D-5904 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 92 cm(36.22 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  8S-6392 [1] COUPLING ASSEM.  
13. 7D-9984 [1] ELBOW  
14. 3K-0360 [5] SEAL  
15. 9D-6669 [1] BLOCK  
16. 9S-4185 [1] PLUG  
17. 9S-8008 [1] PLUG  
18. 8D-5381 [1] HOSE  
19. 5P-0598 [2] CLAMP  
20. 8D-7578 [1] TUBE ASSEM.  
21. 0S-1587 [4] BOLT  
22. 3B-4508 [8] LOCKWASHER  
23. 8S-4107 [1] FLANGE  
  5H-8848 [1] SEAL  
24. 030-7935 [1] CONNECTOR  
  7M-8485 [1] SEAL  
25. 8D-9506 [1] TUBE ASSEM.  
26. 8M-0505 [2] CONNECTOR  
27. 9D-6998 [1] ADAPTER  
  4J-0522 [1] SEAL  
28. 061-9258 [1] TEE  
29. 030-3978 [1] CONNECTOR  
  3J-7354 [1] SEAL  
30. 9D-6061 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0179 H HOSE 55 cm(21.7 in.)  
  8S-6391 [1] COUPLING ASSEM. (straight)  
  3S-8606 [2] SLEEVE  
  8S-4055 [1] COUPLING ASSEM. (90 degrees)  
31. 1B-2886 C [4] BOLT  
32. 030-7942 [1] ELBOW  
33. 8F-4197 [2] BOLT 5.50 in. (1.40 dm) long  
  7H-3472 [2] BOLT 4.75 in. (1.21 dm) long  
  3B-4507 [4] LOCKWASHER  
34. 2G-1023 [1] ADAPTER  
  8D-6128 [1] GASKET  
35. 9D-0884 [1] CONNECTOR  
36. 030-7936 [1] CONNECTOR  
37. 3J-1907 [3] SEAL  
38. 2R-6806 [1] CONNECTOR  
39. 030-7944 [2] ELBOW  
40. 005-8164 C [1] PLUG  
  3D-2824 [1] SEAL  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

Information:

Special Instruction
Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207}
Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207}
Specifications
Drive For Hydraulic Pump
14G MOTOR GRADER HYDRAULIC SYSTEM AND STEERING
Pump Drive<BR> 8D5000
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Circle Drive and Circle Drive With Slip Clutch Group
14G & 16G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Reuse And Salvage Guidelines
Motor Grader Circle Pinion Reuse {5207}
Motor Grader Circle Pinion Reuse {5207}
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Disassembly and Assembly
Circle Drive Lock Check Valve
14G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive Motor
14G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive
14G MOTOR GRADER VEHICLE SYSTEMS
Pump Drive
14G MOTOR GRADER VEHICLE SYSTEMS
Pump Group Drive Shaft
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Circle Drive Lock Check Valve
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive Motor
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Pump Drive
14G & 16G MOTOR GRADER VEHICLE SYSTEMS
Pump Group Drive Shaft
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Service Magazine
Slip Clutches Now Available On Circle Drive Group{5058,5237,5207,6154}
1981/02/09
Lubrication Of Circle Drive Pinion And Wear Strips; Wear Strip Clearance Adjustment{5207,6155}
1984/11/05
Order The Correct Replacement Parts For Piston Motor Groups In The Circle Drive{5058}
1984/11/19
Hydraulic Motor And Lines Changed For Circle Drive{5050,5200}
1977/04/11
Hydraulic Motor For Circle Drive Is Changed{5200,5058}
1977/10/10
Correct Adjustment And Lubrication Will Improve Circle Component Life {5207,6154}
1987/08/03
Procedure To Test And Adjust Circle Drive Slip Clutch{5207}
1987/08/10
Back-Up Rings Added To Circle Drive Gerotor Motor Groups{5082}
1987/10/12
Back-Up Rings Made Of Harder Material Are Available For Use In Circle Drive Gerotor Motor Groups {5082}
1988/05/02
New Circle Drive Pinions Have Longer Service Life {5207}
1988/09/26
Improved Lubrication To Stubshaft Portion Of Drive Shaft{3253}
1988/10/17
New Circle Drive Gerotor Motor Groups Provide Higher Torque To Circle Drive {5082}
1988/12/19
Items To Check If Excessive Effort Is Required To Operate Circle Drive Motor{5050,5235}
1989/01/30
Optional Method To Improve Lubrication To Stubshaft Portion Of Drive Shaft {3253}
1989/09/04
New Circle And Beam Assembly, Circle Drive Group Used{6154,5207,7552}
1991/04/29
Circle Drives Now Use Gear Oil{5207,5200,0645,7555,7561}
1992/03/02
Circle Drive Unit Cover Can Be Modified To Prevent Oil Loss Through The Vent{5201,5209}
1994/03/07
Ground Body Bolts And Locknuts Improve Retention Of The Aluminum Gear In The Circle Drive Groups {5207}
1995/09/11
Correction to the Disassembly and Assembly Manual for Vehicle Systems {5207}
2000/10/23
Procedure To Test the Slip Clutch for the Circle Drive {5082, 5207, 5209}
2004/08/16
An Improved Circle Drive Pinion Is Now Used {5207}
2006/02/06
Circle Worm Drive Has Been Improved on Certain Motor Graders {5207}
2008/05/12
An Improved Pinion Shaft with a New Rugged Bolted Joint Provides Consistent Torque on the Circle Drive {5207}
2008/05/12
The Disassembly and Assembly Manual for Worm Gear Bearing Preload Setting has been Updated on Certain Motor Graders {5207}
2015/01/16
A New Shaft With New Pinion In The Circle Drive Group Is Now Used On Certain Motor Graders {5207}
A New Shaft With New Pinion In The Circle Drive Group Is Now Used On Certain Motor Graders {5207}

Caterpillar Parts SIS Catalog 14G :

SLIP JOINT GP
8D-3259 SLIP JOINT GP
CHECK VALVE GROUP
8J-8814 CHECK VALVE GROUP
HARNESS ASSEMBLY
9D-5461 HARNESS ASSEMBLY
ACCUMULATOR LINES GROUP
2G-9405 ACCUMULATOR LINES GROUP
ACCUMULATOR LINES GROUP
2G-9405 ACCUMULATOR LINES GROUP
ACCUMULATOR LINES GROUP
9D-6455 ACCUMULATOR LINES GROUP
ACCUMULATOR LINES GROUP
9D-6455 ACCUMULATOR LINES GROUP
VALVE GP-SOLENOID
9J-1736 VALVE GP-SOLENOID
LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP
LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP
LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP
LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP
LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP
LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP
LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP
LINES GP-HYDRAULIC PUMP
8D-7650 LINES GP-HYDRAULIC PUMP

Truck sale:

Caterpillar 14G
 
Caterpillar 14G
- motor graders
BOYD CAT COMPANY
Caterpillar 14G, motor graders, Construction
46,765 
Caterpillar 14G, motor graders, Construction
- motor graders
FINNING CANADA
Caterpillar 14G, motor graders, Construction
39,880 
Caterpillar 14G, motor graders, Construction
- motor graders
FINNING CANADA
Caterpillar 14G, motor graders, Construction
40,549 
Caterpillar 14G, motor graders, Construction
- motor graders
FINNING CANADA
 
43,900 
Caterpillar 14G, motor graders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.