AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6N281 GOVERNOR AND FUEL INJECTION PUMP GROUP Only separate parts serviced. When complete Group is required order 6N2476 shown on Page 176A. Part of 4N3974 Engine Arrangement. Governor and Fuel Injection Pump and Torque Control parts are shown on Pages 156, 156A and 199 950


FUEL SYSTEM
GOVERNOR GP

WHEEL LOADER 950 WHEEL LOADER 31K
 3304 VEHICULAR ENGINE 31K01201-01485 (MACHINE) UEG0797S 950 31K   (1968)

FUEL SYSTEM

GOVERNOR GP
GOV & FUEL INJ PUMP GP
6N-0284 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0284 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0281 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0282 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-2914 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-2914 GOVERNOR AND FUEL INJECTION PUMP GROUP
 

#UEG0797S0230
 

6N-0281: GOV & FUEL INJ PUMP GP

6N281 GOVERNOR AND FUEL INJECTION PUMP GROUP
Only separate parts serviced. When complete Group is required order 6N2476 shown
on Page 176A. Part of 4N3974 Engine Arrangement. Governor and Fuel Injection
Pump and Torque Control parts are shown on Pages 156, 156A and 199
c201367 UEG0797S
6N0281 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] TORQUE CONTROL  
2. Y [1] GOVERNOR & FUEL INJECTION PUMP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4225 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#UEG0797S0231
 

6N-0282: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N282 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 78P8215-Up. Only separate parts serviced. When complete Group is
required order 6N2476 shown on Page 176A. Part of 4N3802 Engine Arrangement
6N243 Governor and Fuel Injection Pump and 6N581 Torque Control parts are
shown on Pages 176 and 198
c153895 UEG0797S
6N0282 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-0581 YC [1] TORQUE CONTROL  
2. 6N-0243 YC [1] GOVERNOR & FUEL INJECTION PUMP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4228 [1] SPRING (std)  
    -OR-
  6N-5169 CH [1] SPRING (increase high idle)  
  H   NOT PART OF 6N282 PUMP GROUP
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0797S0232
 

4N-2914: GOVERNOR AND FUEL INJECTION PUMP GROUP

4N2914 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 78P1 to 78P5942 inclusive
Part of 4N3799 and 2P6779 Engine Arrangements
4N1834 Governor and Fuel Injection Pump and 4N283 Torque Control parts are shown on Pages 160 through 175 and 196
c200709 UEG0797S
4N2914 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT (1 in. long)  
  8S-4710 [2] BOLT (4 in. long)  
3. 4N-0159 [1] GASKET  
4. 4N-4320 [1] SHAFT ASSEM.  
5. 4N-0443 C [1] PIN  
6. Y [1] GOVERNOR AND FUEL PUMP  
    (Separate Illustration)
7. 9L-5914 C [1] WASHER  
8. 4N-1550 [1] COVER  
  4N-1551 [1] GASKET  
9. 4F-4879 [1] BOLT  
  4B-5167 [1] WASHER  
10. 0S-1615 [8] BOLT  
11. 6D-0238 [1] VALVE ASSEM.  
12. 4N-4227 C [1] SPRING  
13. YC [1] TORQUE CONTROL  
    (Separate Illustration)
14. 4B-9782 C [1] BALL  
15. 4N-4366 C [1] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0797S0233
 

4N-2914: GOVERNOR AND FUEL INJECTION PUMP GROUP

4N2914 GOVERNOR AND FUEL INJECTION PUMP GROUP--Type 1
Serial No. 78P5943 to 78P12618 inclusive. Part of 2P6779 Engine Arrangement
4N1834 Governor and Fuel Injection Pump and 4N283 Torque Control parts are shown on Pages 160 through 175 and 196
c200709 UEG0797S
4N2914 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT (1 in. long)  
  8S-4710 [2] BOLT (4 in. long)  
3. 4N-0159 [1] GASKET  
4. 4N-4320 [1] SHAFT ASSEM.  
5. 4N-0443 C [1] PIN  
6. Y [1] GOVERNOR AND FUEL PUMP  
    (Separate Illustration)
7. 9L-5914 C [1] WASHER  
8. 4N-1550 [1] COVER  
  4N-1551 [1] GASKET  
9. 4F-4879 [1] BOLT  
  4B-5167 [1] WASHER  
10. 0S-1615 [8] BOLT  
11. 6D-0238 [1] VALVE ASSEM.  
12. 4N-4227 C [1] SPRING  
13. YC [1] TORQUE CONTROL  
    (Separate Illustration)
14. 4B-9782 C [1] BALL  
15. 4N-4366 C [1] SPRING  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0797S0234
 

4N-2914: GOVERNOR AND FUEL INJECTION PUMP GROUP

4N2914 GOVERNOR AND FUEL INJECTION PUMP GROUP--Type 2
Serial No. 78P5943 to 78P12618 inclusive. Part of 2P6779 Engine Arrangement
6N5525 Governor and Fuel Injection Pump and 6N581 Torque Control parts are shown on Pages
175A thru 175M and 198
c163351 UEG0797S
4N2914 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT (1 in. long)  
  8S-4710 [2] BOLT (4 in. long)  
3. 4N-0159 [1] GASKET  
4. 4N-4320 [1] SHAFT ASSEM.  
5. 4N-0443 [1] PIN  
6. 6N-5525 YC [1] GOVERNOR AND FUEL PUMP GRP.  
    (Separate Illustration)
7. 4N-4366 [1] SPRING  
8. 4N-1550 [1] COVER  
  4N-1551 [1] GASKET  
9. 4F-4879 [1] BOLT  
  4B-5167 [1] WASHER  
10. 0S-1615 [8] BOLT  
11. 7N-0450 C [1] VALVE ASSEM.  
12. 4N-4227 [1] SPRING  
13. 6N-0581 YC [1] TORQUE CONTROL GROUP  
    (Separate Illustration)
14. 4B-9782 [1] BALL  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0797S0235
 

6N-0275: GOVERNOR AND FUEL INJECTION PUMP GROUP

6N275 GOVERNOR AND FUEL INJECTION PUMP GROUP--Replaced by 6N2476
shown on Page 176A
Serial No. 78P12619-Up. Part of 2P6779 Engine Arrangement. 6N243 Governor and
Fuel Injection Pump and 6N509 Torque Control Parts are shown on Pages 176 and 199
c202744 UEG0797S
6N0275 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] TORQUE CONTROL  
2. Y [1] GOVERNOR & FUEL INJECTION PUMP  
    (Separate Illustration)
3. 6N-0269 [1] PIN ASSEM.  
4. 4N-4227 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#UEG0797S0236
 

4N-4201: GOVERNOR AND FUEL INJECTION PUMP GROUP

4N4201 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 78P5188 to 78P5942 inclusive. Part of 4N3803 Engine Arrangement
Governor and Fuel Injection Pump and Torque Control parts are shown on Pages 160 through 175 and 196
c202750 UEG0797S
4N4201 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT (1 in. long)  
  8S-4710 [2] BOLT (4 in. long)  
3. 4N-0159 [1] GASKET  
4. 4N-4320 [1] SHAFT ASSEM.  
5. 4N-0443 [1] PIN  
6. Y [1] GOVERNOR AND FUEL PUMP  
    (Separate Illustration)
7. 9L-5914 [1] WASHER  
8. 4N-1550 [1] COVER  
  4N-1551 [1] GASKET  
9. 4F-4879 [1] BOLT  
  4B-5167 [1] WASHER  
10. 0S-1615 [8] BOLT  
11. 6D-0238 [1] VALVE ASSEM.  
12. 4N-4225 [1] SPRING  
13. YC [1] TORQUE CONTROL  
    (Separate Illustration)
14. 2P-0726 [1] SPRING  
15. 4N-8179 [1] PIN  
16. 4N-0444 [2] SPACER  
17. 6N-0242 C [1] COVER  
  4N-0403 [1] GASKET  
18. 2S-0762 C [2] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0797S0237
 

4N-4201: GOVERNOR AND FUEL INJECTION PUMP GROUP

4N4201 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 78P5943-Up. Part of 4N3799 and 4N3803 Engine Arrangements
Governor and Fuel Injection Pump and Torque Control parts are shown on Pages 160 through 175 and 196
c202750 UEG0797S
4N4201 GOVERNOR AND FUEL INJECTION PUMP GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0053 [1] COVER  
2. 0S-1616 [1] BOLT (1 in. long)  
  8S-4710 [2] BOLT (4 in. long)  
3. 4N-0159 [1] GASKET  
4. 4N-4320 [1] SHAFT ASSEM.  
5. 4N-0443 [1] PIN  
6. Y [1] GOVERNOR AND FUEL PUMP  
    (Separate Illustration)
7. 9L-5914 [1] WASHER  
8. 4N-1550 [1] COVER  
  4N-1551 [1] GASKET  
9. 4F-4879 [1] BOLT  
  4B-5167 [1] WASHER  
10. 0S-1615 [8] BOLT  
11. 6D-0238 [1] VALVE ASSEM.  
12. 4N-4225 [1] SPRING  
13. YC [1] TORQUE CONTROL  
    (Separate Illustration)
14. 2P-0726 [1] SPRING  
15. 4N-8179 [1] PIN  
16. 4N-0444 [2] SPACER  
17. 6N-0242 C [1] COVER  
  4N-0403 [1] GASKET  
18. 2S-0762 C [2] BOLT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0797S0238
 

6N-0279: GOV & FUEL INJ PUMP GP

6N279 GOVERNOR AND FUEL INJECTION PUMP GROUP
Only separate parts serviced. When complete Group is required order 6N2476 shown
on Page 176A. Part of 4N3801 Engine Arrangement. Governor and Fuel Injection
Pump and Torque Control parts are shown on Pages 176 and 198
c201368 UEG0797S
6N0279 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] TORQUE CONTROL  
2. Y [1] GOVERNOR & FUEL INJECTION PUMP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4225 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#UEG0797S0239
 

6N-0277: GOV & FUEL INJ PUMP GP

6N277 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 78P12647-Up. Only separate parts serviced. When complete Group is
required order 6N2476 shown on Page 176A. Part of 4N3803 Engine Arrangement
6N243 Governor and Fuel Injection Pump and 6N2505 Torque Control parts are shown
on Pages 176 and 198A
c152518 UEG0797S
6N0277 GOV & FUEL INJ PUMP GP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-2505 CY [1] TORQUE CONTROL  
    (Separate Illustration)
2. 6N-0243 CY [1] GOVERNOR AND FUEL INJECTION PUMP  
    (Separate Illustration)
3. 4N-0443 [1] PIN  
4. 4N-4225 [1] SPRING  
  C   INDICATES
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Governor Housing<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Injection Pump Housing And Governor (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing And Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Transfer Pump (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Transfer Pump (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing And Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Check Valve And Bypass Valve
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pumps
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor Control Pedal
950 & 966C WHEEL LOADERS OPERATOR'S STATION
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog 950 :

GOV & FUEL INJ PUMP GP
6N-0284 GOV & FUEL INJ PUMP GP
GOV & FUEL INJ PUMP GP
6N-0284 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
8S-0727 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
8S-0727 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOV & FUEL INJ PUMP GP
6N-0284 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
8S-0727 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
7S-9334 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
7S-9334 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0282 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-2914 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-2914 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-2914 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-0275 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-4201 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-4201 GOVERNOR AND FUEL INJECTION PUMP GROUP
GOV & FUEL INJ PUMP GP
6N-0279 GOV & FUEL INJ PUMP GP

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.