AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N6389 GOVERNOR COVER GROUP Part of 7S9332 and 7S9333 Governor Groups shown on Pages 181D & 185D 950


FUEL SYSTEM
GOVERNOR GP
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP

WHEEL LOADER 950 WHEEL LOADER 31K
 3304 VEHICULAR ENGINE 31K01201-01485 (MACHINE) UEG0797S 950 31K   (1968)

FUEL SYSTEM

GOVERNOR GP
7S-9333 GOVERNOR GROUP
COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
COVER GP-GOVERNOR
8N-6389 COVER GP-GOVERNOR
 

#UEG0797S0350
 

8N-6389: COVER GP-GOVERNOR

8N6389 GOVERNOR COVER GROUP
Part of 7S9332 and 7S9333 Governor Groups shown on Pages 181D & 185D
c175207 UEG0797S
8N6389 COVER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-7316 [1] DOWEL  
2. 2S-7465 [1] SCREW  
3. 4B-2042 [1] NUT  
4. 3B-4501 [1] LOCKWASHER  
5. 2S-7307 [2] INSULATOR  
6. 8F-1462 [2] WASHER  
 

#UEG0797S0351
 

4N-7765: ELECTRIC STARTING MOTOR

ELECTRIC STARTING MOTOR (4N7765 N/S)
Part of 2P6777, 2P6782, 2P6784, 2P6785 and 2P9561 Engine Arrangements
4N7902 and 4N7901 Motor parts are shown on Pages 206, 207, 210 and 211
c146551 UEG0797S
4N7765 ELECTRIC STARTING MOTOR Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-7901 [1] MOTOR  
    -OR-
  4N-7902 Y [1] MOTOR  
    (Separate Illustration)
2. 8S-2332 [3] BOLT  
  3B-4510 [3] LOCKWASHER  
3. 4H-7869 [1] GASKET  
4. 9F-4337 [1] WIRE ASSEM.  
    (Includes)
5. 9F-3068 [1] TERMINAL  
6. 7F-8032 [1] TERMINAL (ground)  
  Y   SEPARATE ILLUSTRATION
 

#UEG0797S0352
 

7S-4090: STARTING MOTOR GP-ELECTRIC

ELECTRIC STARTING MOTOR (7S4090 N/S)--24 Volt
Part of all Engine Arrangements except 2P6777, 2P6782, 2P6784, 2P6785
and 2P9561. 2P2502 and 3P6 Motor parts are shown on Pages 204, 205, 208 and 209
c205711 UEG0797S
7S4090 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2P-2502 CY [1] MOTOR GROUP  
    -OR-
  3P-0006 CY [1] MOTOR GROUP  
    (Separate Illustration)
2. 7J-8902 C [3] BOLT  
  8D-5054 [3] WASHER  
3. 4H-7869 [1] GASKET  
4. 9F-4337 [1] WIRE ASSEM.  
5. 9F-3068 [1] TERMINAL  
6. 7F-8032 [1] TERMINAL (Ground)  
7. 9F-5509 [1] INSULATOR  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0797S0353
 

2P-2502: STARTING MOTOR GP-ELECTRIC

2P2502 MOTOR GROUP--Delco-Remy--Part 1 of 2
Only separate parts serviced. When complete Group is required order 3P7. Part of Electric
Starting Motor shown on Page 203. 6N5123 Switch parts are shown on Page 212
c155230 UEG0797S
2P2502 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7F-4556 [9] BOLT  
  1L-4789 [9] LOCKWASHER  
2. 4M-0189 [2] SEAL  
3. 2L-8166 [1] WASHER  
4. 3P-0173 [1] FRAME ASSEM.  
5. 9F-2247 [1] PLUG  
  9F-2547 [1] WICK  
6. 3P-0170 [1] BUSHING  
7. 6N-5123 YC [1] SWITCH ASSEM.  
    (Separate Illustration)
8. 6H-3622 [4] SCREW ASSEM.  
9. 4M-1850 [1] HOUSING ASSEM.  
  2B-4602 [1] PLUG  
  9F-2547 [1] WICK  
10. 1M-9968 [1] BUSHING  
11. 2F-6678 [1] SEAL  
12. 5L-9056 [4] BRUSH  
13. 8M-5814 [4] SCREW ASSEM.  
14. 066-5545 [2] HOLDER  
15. 5L-8884 [2] SPRING  
16. 5L-8887 [2] SUPPORT ASSEM.  
    (Includes)
17. 9F-3483 [1] LEAD  
18. 4B-4441 [2] RIVET  
19. 5L-8888 [1] PIN  
20. 3L-3867 [2] SCREW  
  4B-2047 [2] NUT  
  7H-2079 [2] LOCKWASHER  
21. 4M-8472 [2] HOLDER  
22. 1S-0297 [1] HOUSING ASSEM.  
    (Includes)
23. 4M-1896 [1] BUSHING  
24. 2P-4708 [1] DRIVE ASSEM. (800068)  
    (Includes)
25. 9S-9771 [1] PINION  
  9S-9770 [1] SPRING  
    -OR-
26. 6N-3827 CH [1] DRIVE ASSEM. (480118)  
27. 4M-1851 [1] GASKET  
28. 1M-9971 [1] SPACER  
29. 8H-1141 [4] SHOE  
30. 3R-8797 [8] SCREW ASSEM.  
31. 3P-0174 [1] COIL ASSEM.  
32. 1H-2629 [1] STRIP  
33. 4M-1833 [5] SCREW 1.5 in. (3.81 cm) long  
  7M-0336 [1] SCREW .86 in. (2.18 cm) long  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE FOR 2P4708 DRIVE ASSEM.:
  9S-9825 [1] KIT (cup)  
  4S-9459 [1] KIT (washer)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   NOT PART OF 2P2502 STARTING MO
 

#UEG0797S0354
 

2P-2502: STARTING MOTOR GP-ELECTRIC

2P2502 MOTOR GROUP--Delco-Remy--Part 2 of 2
Part of Electric Starting Motor shown on Page 203
Only separate parts serviced. When complete Group is required order 3P7
c207039 UEG0797S
2P2502 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-3380 C [1] BUSHING  
2. 3J-4818 [2] LOCKWASHER  
3. 3H-3680 [2] NUT  
4. 0S-1587 C [1] BOLT  
5. 3H-3681 [2] NUT  
6. 9H-3757 [2] WASHER (large)  
  7F-3494 C [2] WASHER (small)  
7. 9F-4976 [1] LOCKWASHER  
8. 4M-1841 [1] CONNECTOR  
9. 5L-8877 [1] ARMATURE ASSEM.  
10. 9M-7606 [1] PLUNGER ASSEM.  
11. 4M-0188 [1] WASHER  
12. 4M-1828 [1] RETAINER  
13. 9M-7609 [1] SPRING  
14. 4M-1829 [1] BOOT  
15. 4M-1827 [1] RETAINER  
16. 9M-7611 [2] RING  
17. 3F-2617 [1] NUT  
18. 4M-1831 [1] PLUG  
  7L-2894 [1] GASKET  
19. 4M-1853 [1] LEVER ASSEM.  
    (Includes)
  4M-1830 [1] GUIDE  
20. 4M-1854 [1] SHAFT  
  1H-1023 [1] SEAL 9.37 mm(.369 in.) diameter  
  2D-6392 [1] SEAL 6.07 mm(.239 in.) diameter  
21. 4L-2729 [1] WASHER  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  3N-3763 C [1] TERMINAL KIT (insulator)  
  C   INDICATES CHANGE
 

#UEG0797S0355
 

4N-7902: MOTOR GROUP

4N7902 MOTOR GROUP--Delco-Remy--Part 1 of 2
Only separate parts serviced. When complete Group is required order 4N7751. Part of Electric
Starting Motor shown on Page 203. 6N5123 Switch parts are shown on Page 212
c155657 UEG0797S
4N7902 MOTOR GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7F-4556 [9] BOLT  
  1L-4789 [9] LOCKWASHER  
2. 4M-0189 [2] SEAL  
3. 2L-8166 [1] WASHER  
4. 3P-0173 [1] FRAME ASSEM.  
5. 9F-2247 [1] PLUG  
  9F-2547 [1] WICK  
6. 3P-0170 [1] BUSHING  
7. 6N-5123 CY [1] SWITCH ASSEM.  
    (Separate Illustration)
8. 6H-3622 [4] SCREW ASSEM.  
9. 4S-7899 [1] HOUSING ASSEM.  
  2B-4602 [1] PLUG  
  9F-2547 [1] WICK  
10. 1M-9968 [1] BUSHING  
11. 2F-6678 [1] SEAL  
12. 4L-2729 [1] WASHER  
13. 8M-5814 [4] SCREW ASSEM.  
14. 066-5545 [2] HOLDER  
15. 5L-8884 [2] SPRING  
16. 5L-8887 [2] SUPPORT ASSEM.  
    (Includes)
17. 9F-3483 [1] LEAD  
18. 4B-4441 [2] RIVET  
19. 5L-8888 [1] PIN  
20. 3L-3867 [2] SCREW  
  4B-2047 [2] NUT  
  7H-2079 [2] LOCKWASHER  
21. 4M-8472 [2] HOLDER  
22. 1S-0297 [1] HOUSING ASSEM.  
    (Includes)
23. 4M-1896 [1] BUSHING  
24. 2P-4708 C [1] DRIVE ASSEM. (800068)  
    (Includes)
25. 9S-9771 [1] PINION  
  9S-9770 [1] SPRING  
    -OR-
26. 6N-3827 [1] DRIVE ASSEM. (480118)  
27. 4M-1851 [1] GASKET  
28. 1M-9971 [1] SPACER  
29. 8H-1141 [4] SHOE  
30. 3R-8797 [8] SCREW ASSEM.  
31. 3P-0174 [1] COIL ASSEM.  
32. 1H-2629 [1] STRIP  
33. 5L-9056 [4] BRUSH  
34. 4M-1833 [5] SCREW 1.5 in.(3.81 cm) long  
  7M-0336 [1] SCREW .86 in.(2.18 cm) long  
    THE FOLLOWING REPAIR KITS ARE AVAILABLE FOR 2P4708 DRIVE ASSEM.:
  9S-9825 [1] KIT (cup)  
  4S-9459 [1] KIT (washer)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   NOT PART OF 4N7902 MOTOR GROUP
 

#UEG0797S0356
 

4N-7902: MOTOR GROUP

4N7902 MOTOR GROUP--Delco-Remy--Part 2 of 2
Part of Electric Starting Motor shown on Page 203
Only separate parts serviced. When complete Group is required order 4N7751
c214306 UEG0797S
4N7902 MOTOR GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3L-3380 C [1] BUSHING  
2. 7F-3494 [2] WASHER  
3. 3H-3680 [2] NUT  
4. 0S-1587 C [1] BOLT  
5. 3H-3681 [2] NUT  
6. 9H-3757 [2] WASHER  
7. 9F-4976 [1] LOCKWASHER  
8. 4M-1841 [1] CONNECTOR  
9. 5L-8877 [1] ARMATURE ASSEM.  
10. 9M-7606 [1] PLUNGER ASSEM.  
11. 4M-0188 [1] WASHER  
12. 4M-1828 [1] RETAINER  
13. 9M-7609 [1] SPRING  
14. 4M-1829 [1] BOOT  
15. 4M-1827 [1] RETAINER  
16. 9M-7611 [2] RING  
17. 3F-2617 [1] NUT  
18. 4M-1831 [1] PLUG  
  7L-2894 [1] GASKET  
19. 4M-1853 [1] LEVER ASSEM.  
20. 4M-1854 [1] SHAFT  
  1H-1023 [1] SEAL 9.37 mm(.369 in.) DIA.  
  2D-6392 [1] SEAL 6.07 mm(.239 in.) DIA.  
21. 4L-2729 [1] WASHER  
22. 3J-4818 [2] LOCKWASHER  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  3N-3763 C [1] KIT (insulator)  
    (Includes Insulator Washer & Bushing)
  C   INDICATES CHANGE
 

#UEG0797S0357
 

3P-0006: STARTING MOTOR GP-ELECTRIC

3P6 STARTING MOTOR GROUP--Prestolite--Part 1 of 2
Part of Electric Starting Motor shown on Page 203
9S7976 Switch parts are shown on Page 212
Only separate parts serviced. When complete Group is required order 3P7
c207040 UEG0797S
3P0006 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-5117 [3] NUT  
2. 3B-4508 [6] LOCKWASHER  
3. 085-2771 [1] CONNECTOR  
4. 4N-9404 C [1] LEAD ASSEM.  
5. 4N-4694 [1] KIT (Field Terminal Stud)  
    (Includes Stud, Bushing and Washers)
6. 1D-4719 [3] NUT  
7. 9S-7976 Y [1] SOLENOID ASSEM.  
    (Separate Illustration)
8. 6H-3622 [4] SCREW  
  3B-4504 [4] LOCKWASHER  
  3K-6116 [4] WASHER  
9. 4M-3217 [2] SCREW  
10. 4B-1220 [3] SCREW  
11. 8S-6035 [1] GASKET  
12. 3B-4502 [4] LOCKWASHER  
13. 8S-2769 [1] FIELD ASSEM. (Commutator End)  
14. 2B-4602 [1] PLUG  
15. 8S-4682 [1] KIT (Bearing and Wick)  
16. 4N-4693 KIT (Commutator End Terminal Stud)  
    (Includes Stud, Bushing and Washers)
17. 1D-4717 [1] NUT (plain)  
  1B-2578 [1] NUT (jam)  
  3B-4506 [2] LOCKWASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0797S0358
 

3P-0006: STARTING MOTOR GP-ELECTRIC

3P6 STARTING MOTOR GROUP--Prestolite--Part 2 of 2
Part of Electric Starting Motor shown on Page 203
Only separate parts serviced. When complete Group is required order 3P7
c215137 UEG0797S
3P0006 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4691 [1] PLATE ASSEM.  
2. 4N-8618 C [1] KIT (Includes 3 Brushes and 1 Clip)  
  4N-4692 [1] KIT (Includes 8 Springs)  
3. 2P-8825 C [1] SHIFT YOKE ASSEM.  
4. 2P-8817 [1] KIT (Yoke Adjusting)  
    (Includes Plugs, Pin, Gasket and Nut)
5. 8S-1535 [1] KIT (Includes 6 Plugs)  
6. 9S-6100 [1] ARMATURE ASSEM.  
  8S-8071 [1] KIT (Armature Thrust Washers)  
7. 8S-4684 [1] KIT (Bearing and Wick)  
8. 8S-1543 [1] HOUSING ASSEM. (Pinion)  
9. 2B-4602 [1] PLUG  
10. 8S-2780 [1] KIT (Includes 10 Insulations)  
11. 4N-4517 C [1] MOTOR DRIVE ASSEM.  
12. 2H-3931 [1] SEAL  
13. 2P-8824 [1] HOUSING ASSEM.  
  2B-4602 [1] PLUG  
14. 8S-2226 [1] BUSHING  
15. 8S-2225 [1] SEAL  
16. 2P-8816 [1] KIT (Includes Housing Screws)  
17. 3B-4504 [7] LOCKWASHER  
18. 4M-0189 [1] SEAL  
19. 4N-4690 [1] KIT (Field Coil)  
    (Includes Coils, Gaskets and Screws)
  C   INDICATES CHANGE
 

#UEG0797S0359
 

4N-7901: STARTING MOTOR GROUP

4N7901 STARTING MOTOR GROUP--Prestolite--Part 1 of 2
Part of 4N7765 Electric Starting Motor Group shown on Page 203
9S7976 Switch parts are shown on Page 212
c214304 UEG0797S
4N7901 STARTING MOTOR GROUP Parts scheme
  For full view, you need register

Parts for your 950 WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-5117 [3] NUT  
2. 3B-4508 [6] LOCKWASHER  
3. 8S-2771 [1] CONNECTOR  
4. 3B-4506 [2] LOCKWASHER  
5. 4N-4694 [1] KIT (Field Terminal Stud)  
    (Includes Stud, Bushing & Washers)
6. 1D-4719 [3] NUT  
7. 9S-7976 Y [1] SOLENOID ASSEM.  
    (Separate Illustration)
8. 6H-3622 [4] SCREW  
  3B-4504 [4] LOCKWASHER  
  3K-6116 [4] WASHER  
9. 4M-3217 [2] SCREW  
10. 4B-1220 [3] SCREW  
11. 8S-6035 [1] GASKET  
12. 3B-4502 [4] LOCKWASHER  
13. 8S-2769 [1] HEAD ASSEM. (Commutator End)  
14. 2B-4602 [1] PLUG  
15. 8S-4682 [1] KIT (Bearing & Wick)  
16. 4N-4693 [1] KIT (Commutator End Terminal Stud)  
    (Includes Stud, Bushing & Washers)
17. 4N-9404 C [1] LEAD ASSEM.  
18. 1D-4717 [1] NUT (plain)  
  1B-2578 [1] NUT (jam)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - PC)
3304 VEHICULAR ENGINE
Governor Housing<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Governor<BR> (Scroll Fuel System - DI)
3304 VEHICULAR ENGINE
Disassembly and Assembly
Fuel Injection Pump Housing And Governor (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing And Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Transfer Pump (Earlier)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Transfer Pump (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing And Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pump Housing (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor (Later)
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Check Valve And Bypass Valve
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Fuel Injection Pumps
3304 VEHICULAR ENGINE FOR 950 WHEEL LOADER
Governor Control Pedal
950 & 966C WHEEL LOADERS OPERATOR'S STATION
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4180 Off-Engine Lifter Setting Tool Group{0654}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Components Help Prevent Air Leaks In Improved Fuel Ratio Control Groups{1278}
1992/05/25
New Diaphragm Used In Fuel Ratio Control Groups{1278}
1992/06/15
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07

Caterpillar Parts SIS Catalog 950 :

COVER GP-GOVERNOR
4N-4510 COVER GP-GOVERNOR
TORQUE CONTROL GROUP
9S-3423 TORQUE CONTROL GROUP
TORQUE CONTROL GROUP
8S-5549 TORQUE CONTROL GROUP
TORQUE CONTROL GROUP
8S-5549 TORQUE CONTROL GROUP
TORQUE CONTROL GROUP
8S-6099 TORQUE CONTROL GROUP
TORQUE CONTROL GROUP
8S-6099 TORQUE CONTROL GROUP
TORQUE CONTROL GROUP
7S-7813 TORQUE CONTROL GROUP
TORQUE CONTROL GROUP
9S-3312 TORQUE CONTROL GROUP
ELECTRIC STARTING MOTOR
4N-7765 ELECTRIC STARTING MOTOR
STARTING MOTOR GP-ELECTRIC
7S-4090 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
2P-2502 STARTING MOTOR GP-ELECTRIC
2P-2502 STARTING MOTOR GP-ELECTRIC
MOTOR GROUP
4N-7902 MOTOR GROUP
4N-7902 MOTOR GROUP
STARTING MOTOR GP-ELECTRIC
3P-0006 STARTING MOTOR GP-ELECTRIC
3P-0006 STARTING MOTOR GP-ELECTRIC

Truck sale:

 
 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950M, Wheel Loaders, Construction
385,000 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
Caterpillar 950M, Wheel Loaders, Construction
454,718 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
WYOMING MACHINERY
 
167,802 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
 
166,716 
Caterpillar 950M, Wheel Loaders, Construction
- Wheel Loaders
FINANZAUTO S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.