ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPALTERNATOR GP-CHARGING
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#UEG0807S0060
9G-5584: STARTING MOTOR GP-ELECTRIC
9G5584 ELECTRIC STARTING MOTOR GROUP--24 Volt--Prestolite--Part 2 of 2--Type 1
Serial No. 45P1512 to 45P1514 and 45P1516-Up
Part of 6N1889 Electric Starting Motor Group listed on Page 26C-2
Serial No. 45P1512 to 45P1514 and 45P1516-Up
Part of 6N1889 Electric Starting Motor Group listed on Page 26C-2
Parts for your 621B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2P-8822 | [1] | PLATE ASSEM. | |
| 2. | 4N-9401 | [1] | KIT (Includes 6 Brushes) | |
| 2P-8868 | [1] | KIT (Includes 8 Springs) | ||
| 3. | 2P-8825 | [1] | SHIFT YOKE ASSEM. | |
| 4. | 2P-8817 | [1] | KIT (Yoke Adjusting) | |
| (Includes Plugs, Pin, Gasket And Nut) | ||||
| 5. | 8S-1535 | [1] | KIT (Includes 6 Plugs) | |
| 6. | 4N-9402 | [1] | KIT (Includes 10 Insulations) | |
| 7. | 8S-4684 | [1] | KIT (Bearing And Wick) | |
| 8. | 9G-5854 | [1] | HOUSING ASSEM. (Pinion) | |
| 9. | 9F-2247 | [1] | PLUG | |
| 10. | 8S-4680 | [1] | KIT (Includes 10 Seals) | |
| 11. | 9G-5587 | [1] | DRIVE ASSEM. | |
| 12. | 2H-3931 | [1] | SEAL | |
| 13. | 2P-8824 | [1] | HOUSING ASSEM. | |
| 2B-4602 | [1] | PLUG | ||
| 14. | 8S-2226 | [1] | BUSHING | |
| 15. | 8S-2225 | [1] | SEAL | |
| 16. | 0L-1340 | [7] | SCREW | |
| 2P-8816 | [1] | KIT (Includes Housing Screws) | ||
| 17. | 3B-4504 | [7] | LOCKWASHER | |
| 18. | 4M-0189 | [1] | SEAL | |
| 19. | 2P-8818 | [1] | KIT (Field Coil) | |
| (Includes Coils, Gaskets And Screws) | ||||
| 20. | 8S-1546 | [1] | ARMATURE ASSEM. | |
| 8S-8075 | [1] | KIT (Armature Thrust Washers) | ||
#UEG0807S0061
9G-5584: STARTING MOTOR GP-ELECTRIC
9G5584 ELECTRIC STARTING MOTOR GROUP--24 Volt--Prestolite--Part 1 of 2--Type 2
Serial No. 45P1512 to 45P1514 and 45P1516-Up
Part of 6N1889 Electric Starting Motor Group shown on Page 26C-2
3T3369 Solenoid parts are shown on Page 26C-1
Serial No. 45P1512 to 45P1514 and 45P1516-Up
Part of 6N1889 Electric Starting Motor Group shown on Page 26C-2
3T3369 Solenoid parts are shown on Page 26C-1
Parts for your 621B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1D-5117 | [2] | NUT (jam) | |
| 2. | 3B-4508 | [6] | LOCKWASHER | |
| 3. | 4N-9405 | [1] | CONNECTOR | |
| 4. | 4N-9404 | [1] | LEAD ASSEM. | |
| 5. | 2P-8819 | [1] | KIT (Field Terminal Stud) | |
| (Includes Stud, Bushing And Washers) | ||||
| 6. | 1D-4719 | [4] | NUT | |
| 7. | 3T-3369 CY | [1] | SOLENOID ASSEM. | |
| (Separate Illustration) | ||||
| 8. | 6H-3622 | [4] | SCREW | |
| 3B-4504 | [4] | LOCKWASHER | ||
| 3K-6116 | [4] | WASHER | ||
| 9. | 4M-3217 | [2] | SCREW | |
| 10. | 5D-8412 | [3] | SCREW | |
| 11. | 8S-1553 | [1] | GASKET | |
| 12. | 3B-4502 | [7] | LOCKWASHER | |
| 13. | 1P-7831 | [1] | HEAD ASSEM. (Commutator End) | |
| 14. | 2B-4602 | [1] | PLUG | |
| 15. | 1P-7832 | [1] | KIT (Bearing And Wick) | |
| 16. | 4N-9403 | [1] | KIT-(Commutator End Terminal Stud) | |
| (Includes Stud, Bushing And Washers) | ||||
| 17. | 9G-5588 | [1] | SPACER | |
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
#UEG0807S0062
9G-5584: STARTING MOTOR GP-ELECTRIC
9G5584 ELECTRIC STARTING MOTOR GROUP--24 Volt--Prestolite--Part 2 of 2--Type 2
Serial No. 45P1512 to 45P1514 and 45P1516-Up
Part of 6N1889 Electric Starting Motor Group shown on Page 26C-2
Serial No. 45P1512 to 45P1514 and 45P1516-Up
Part of 6N1889 Electric Starting Motor Group shown on Page 26C-2
Parts for your 621B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2P-8822 | [1] | PLATE ASSEM. | |
| 2. | 4N-9401 | [1] | KIT (Includes 6 Brushes) | |
| 2P-8868 | [1] | KIT (Includes 8 Springs) | ||
| 3. | 2P-8825 | [1] | SHIFT YOKE ASSEM. | |
| 4. | 2P-8817 | [1] | KIT (Yoke Adjusting) | |
| (Includes Plugs, Pin, Gasket And Nut) | ||||
| 5. | 8S-1535 | [1] | KIT (Includes 6 Plugs) | |
| 6. | 4N-9402 | [1] | KIT (Includes 10 Insulations) | |
| 7. | 8S-4684 | [1] | KIT (Bearing And Wick) | |
| 8. | 9G-5854 | [1] | HOUSING ASSEM. (Pinion) | |
| 9. | 9F-2247 | [1] | PLUG | |
| 10. | 8S-4680 | [1] | KIT (Includes 10 Seals) | |
| 11. | 9G-5587 | [1] | DRIVE ASSEM. | |
| 12. | 2H-3931 | [1] | SEAL | |
| 13. | 2P-8824 | [1] | HOUSING ASSEM. | |
| 2B-4602 | [1] | PLUG | ||
| 14. | 8S-2226 | [1] | BUSHING | |
| 15. | 8S-2225 | [1] | SEAL | |
| 16. | 0L-1340 | [7] | SCREW | |
| 2P-8816 | [1] | KIT (Includes Housing Screws) | ||
| 17. | 3B-4504 | [7] | LOCKWASHER | |
| 18. | 4M-0189 | [1] | SEAL | |
| 19. | 2P-8818 | [1] | KIT (Field Coil) | |
| (Includes Coils, Gaskets And Screws) | ||||
| 20. | 8S-1546 | [1] | ARMATURE ASSEM. | |
| 8S-8075 | [1] | KIT (Armature Thrust Washers) | ||
#UEG0807S0063
4N-0957: STARTING MOTOR GP-ELECTRIC
4N957 ELECTRIC STARTING MOTOR GROUP--Delco-Remy--24 Volt--Part 1 of 3
Serial No. 45P1512 to 45P1514 and 45P1516-Up
Part of 4N1062 Electric Starting Motor Group shown on Page 26B
6N5123 Switch parts are shown on Page 26C
Serial No. 45P1512 to 45P1514 and 45P1516-Up
Part of 4N1062 Electric Starting Motor Group shown on Page 26B
6N5123 Switch parts are shown on Page 26C
Parts for your 621B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7F-4556 | [4] | BOLT | |
| 2. | 1L-4789 | [4] | LOCKWASHER | |
| 3. | 4M-1844 | [1] | FRAME ASSEM. | |
| (Includes) | ||||
| 4. | 7S-9826 | [1] | PLUG | |
| 5. | 3S-2398 | [1] | BUSHING | |
| 6. | 2B-4602 | [1] | PLUG | |
| 7. | 9F-2547 | [1] | WICK | |
| 8. | 2L-8166 | [1] | WASHER | |
| 9. | 4M-1868 | [1] | ARMATURE ASSEM. | |
| 10. | 3L-3380 | [1] | BUSHING | |
| 11. | 4M-1839 | [1] | COIL ASSEM. | |
| 12. | 9H-3757 | [2] | WASHER | |
| 13. | 7F-3494 | [1] | WASHER | |
| 14. | 4M-1841 | [1] | CONNECTOR | |
| 15. | 1D-5117 | [2] | NUT | |
| 16. | 6N-5123 CY | [1] | SWITCH ASSEM. | |
| (Separate Illustration) | ||||
| 17. | 6H-3622 | [4] | SCREW ASSEM. | |
| 18. | 3B-4508 | [1] | LOCKWASHER | |
| 19. | 3F-0379 | [8] | SCREW | |
| 20. | 2N-3145 | [1] | INSULATOR | |
| 21. | 4M-1831 | [2] | PLUG | |
| 22. | 7L-2894 | [2] | GASKET | |
| 23. | 1H-2629 | [2] | STRIP | |
| 24. | 8H-1141 | [4] | SHOE | |
| C | INDICATES CHANGE | |||
| Y | SEPARATE ILLUSTRATION | |||
#UEG0807S0064
4N-0957: STARTING MOTOR GP-ELECTRIC
4N957 ELECTRIC STARTING MOTOR GROUP--Delco-Remy--24 Volt--Part 2 of 3
Serial No. 45P1512 to 45P1514 and 45P1516-Up
Part of 4N1062 Electric Starting Motor Group shown on Page 26B
Serial No. 45P1512 to 45P1514 and 45P1516-Up
Part of 4N1062 Electric Starting Motor Group shown on Page 26B
Parts for your 621B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4M-1849 | [1] | LEAD ASSEM. | |
| 2. | 4M-0189 | [1] | SEAL | |
| 3. | 7F-3529 | [3] | WASHER | |
| 4. | 8H-0878 | [3] | LOCKWASHER | |
| 5. | 4B-1220 | [3] | SCREW | |
| 6. | 4M-1846 | [1] | PLATE ASSEM. | |
| (Includes) | ||||
| 7. | 7F-3525 | [8] | WASHER | |
| 8. | 7F-4550 | [1] | PLATE | |
| 9. | 5H-6467 | [2] | SCREW | |
| 10. | 7H-2079 | [8] | LOCKWASHER | |
| 11. | 2L-6679 | [2] | PLATE | |
| 12. | 7F-4546 | [4] | HOLDER | |
| 13. | 7F-3522 | [2] | SCREW | |
| 14. | 7F-3512 | [8] | SPRING | |
| 15. | 9M-7652 | [1] | PLATE ASSEM. | |
| 16. | 7F-4549 | [2] | PLATE | |
| 17. | 4B-1311 | [2] | SCREW | |
| 18. | 7F-4545 | [1] | PLATE | |
| 19. | 3H-3697 | [2] | SCREW | |
| 20. | 2F-2860 | [8] | SCREW | |
| 3B-4501 | [8] | LOCKWASHER | ||
| 21. | 4M-1845 | [8] | BRUSH ASSEM. | |
| 22. | 7F-3494 | [1] | WASHER | |
| 23. | 3B-4508 | [2] | LOCKWASHER | |
| 24. | 1D-5117 | [1] | NUT | |
| 25. | 1D-4719 | [1] | NUT | |
| 26. | 7F-3491 | [2] | WASHER | |
| THE FOLLOWING REPAIR KIT IS AVAILABLE: | ||||
| 3N-3763 | [1] | KIT (insulator) | ||
| (Includes insulator, bushings and washer) | ||||
#UEG0807S0065
4N-0957: STARTING MOTOR GP-ELECTRIC
4N957 ELECTRIC STARTING MOTOR GROUP--Delco Remy--24 Volt--Part 3 of 3
Serial No. 45P1512 to 45P1514 and 45P1516-Up
Part of 4N1062 Electric Starting Motor Group shown on Page 26B
Serial No. 45P1512 to 45P1514 and 45P1516-Up
Part of 4N1062 Electric Starting Motor Group shown on Page 26B
Parts for your 621B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9M-7606 | [1] | PLUNGER ASSEM. | |
| 2. | 4M-0188 | [1] | WASHER | |
| 3. | 4M-1829 | [1] | BOOT | |
| 4. | 4M-1828 | [1] | RETAINER | |
| 5. | 9M-7609 | [1] | SPRING | |
| 6. | 4M-1827 | [1] | RETAINER | |
| 7. | 1H-1023 | [1] | SEAL | |
| 8. | 4S-7899 | [1] | HOUSING ASSEM. | |
| (Includes) | ||||
| 9. | 9F-2547 | [1] | WICK | |
| 10. | 2B-4602 | [1] | PLUG | |
| 11. | 1M-9968 | [1] | BUSHING | |
| 12. | 2F-6678 | [1] | SEAL | |
| 13. | 4L-2729 | [1] | WASHER | |
| 14. | 4L-2729 | [1] | WASHER | |
| 15. | 4M-1853 | [1] | LEVER ASSEM. | |
| 16. | 3F-2617 | [1] | NUT | |
| 17. | 7L-2894 | [1] | GASKET | |
| 18. | 4M-1831 | [1] | PLUG | |
| 19. | 1S-0297 | [1] | HOUSING ASSEM. | |
| (Includes) | ||||
| 20. | 4M-1896 | [1] | BUSHING | |
| 21. | 4M-1833 | [5] | SCREW 38.10 mm(1.50 in.) long | |
| 7M-0336 | [1] | SCREW 22.23 mm(.875 in.) long | ||
| 22. | 6N-3826 H | [1] | DRIVE ASSEM. (480321) | |
| -OR- | ||||
| 1P-2508 | [1] | DRIVE ASSEM. (1894211) | ||
| (Includes) | ||||
| 23. | 9S-9774 | [1] | PINION | |
| 24. | 9M-7611 | [2] | RING | |
| 25. | 2D-6392 | [1] | SEAL | |
| 26. | 7F-4556 | [5] | BOLT | |
| 27. | 1L-4789 | [5] | LOCKWASHER | |
| 28. | 4M-0189 | [1] | SEAL | |
| 29. | 1M-9971 | [1] | SPACER | |
| 30. | 4M-1851 | [1] | GASKET | |
| 31. | 4M-1854 | [1] | SHAFT | |
| THE FOLLOWING REPAIR KITS ARE AVAILABLE FOR 1P2508 DRIVE ASSEM: | ||||
| 7N-6098 | [1] | KIT (cup) | ||
| (Includes cup, spring and retainer) | ||||
| 4S-9459 | [1] | KIT (washer) | ||
| (Includes cup & washers) | ||||
| H | NOT PART OF 4N957 MOTOR GROUP | |||
#UEG0807S0066
9G-5585: STARTING MOTOR GP-ELECTRIC
9G5585 ELECTRIC STARTING MOTOR GROUP--24 Volt--Delco-Remy--Part 1 of 3
Serial No. 45P1512 to 45P1514 & 45P1516-Up
Part of 6N1889 Electric Starting Motor Group listed on Page 26C-2
4M1812 Solenoid Switch parts are shown on Page 26C-1
Serial No. 45P1512 to 45P1514 & 45P1516-Up
Part of 6N1889 Electric Starting Motor Group listed on Page 26C-2
4M1812 Solenoid Switch parts are shown on Page 26C-1
Parts for your 621B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7F-4556 | [4] | BOLT | |
| 2. | 1L-4789 | [4] | LOCKWASHER | |
| 3. | 4M-1844 | [1] | FRAME ASSEM. | |
| (Includes) | ||||
| 4. | 7S-9826 | [1] | PLUG | |
| 5. | 3S-2398 | [1] | BUSHING | |
| 6. | 2B-4602 | [1] | PLUG | |
| 7. | 9F-2547 | [1] | WICK | |
| 8. | 2L-8166 | [1] | WASHER | |
| 9. | 4M-1868 | [1] | ARMATURE ASSEM. | |
| 10. | 3L-3380 | [1] | BUSHING | |
| 11. | 4M-1839 | [1] | COIL ASSEM. | |
| 12. | 9H-3757 | [2] | WASHER | |
| 13. | 7F-3494 | [1] | WASHER | |
| 14. | 4M-1841 | [1] | CONNECTOR | |
| 15. | 1D-5117 | [2] | NUT | |
| 16. | 4M-1812 Y | [1] | SWITCH ASSEM. | |
| (Separate Illustration) | ||||
| 17. | 6H-3622 | [4] | SCREW | |
| 18. | 3B-4508 | [1] | LOCKWASHER | |
| 19. | 3F-0379 | [8] | SCREW | |
| 20. | 2N-3145 | [1] | INSULATOR | |
| 21. | 4M-1831 | [2] | PLUG | |
| 22. | 7L-2894 | [2] | GASKET | |
| 23. | 1H-2629 | [2] | STRIP | |
| 24. | 8H-1141 | [4] | SHOE | |
| Y | SEPARATE ILLUSTRATION | |||
#UEG0807S0067
9G-5585: STARTING MOTOR GP-ELECTRIC
9G5585 ELECTRIC STARTING MOTOR GROUP--24 Volt--Delco-Remy--Part 2 of 3
Serial No. 45P1512 to 45P1514 & 45P1516-Up
Part of 6N1889 Electric Starting Motor Group listed on Page 26C-2
Serial No. 45P1512 to 45P1514 & 45P1516-Up
Part of 6N1889 Electric Starting Motor Group listed on Page 26C-2
Parts for your 621B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4M-1849 | [1] | LEAD ASSEM. | |
| 2. | 4M-0189 | [1] | SEAL | |
| 3. | 7F-3529 | [3] | WASHER | |
| 4. | 8H-0878 | [3] | LOCKWASHER | |
| 5. | 4B-1220 | [3] | SCREW | |
| 6. | 4M-1846 | [1] | PLATE ASSEM. | |
| (Includes) | ||||
| 7. | 7F-3525 | [8] | WASHER | |
| 8. | 7F-4550 | [1] | PLATE | |
| 9. | 5H-6467 | [2] | SCREW | |
| 10. | 7H-2079 | [8] | LOCKWASHER | |
| 11. | 2L-6679 | [2] | PLATE | |
| 12. | 7F-4546 | [4] | HOLDER | |
| 13. | 7F-3522 | [2] | SCREW | |
| 14. | 7F-3512 | [8] | SPRING | |
| 15. | 9M-7652 | [1] | PLATE ASSEM. | |
| 16. | 7F-4549 | [2] | PLATE | |
| 17. | 4B-1311 | [2] | SCREW | |
| 18. | 7F-4545 | [1] | PLATE | |
| 19. | 3H-3697 | [2] | SCREW | |
| 20. | 2F-2860 | [8] | SCREW | |
| 3B-4501 | [8] | LOCKWASHER | ||
| 21. | 4M-1845 | [8] | BRUSH ASSEM. | |
| 22. | 7F-3494 | [1] | WASHER | |
| 23. | 3B-4508 | [2] | LOCKWASHER | |
| 24. | 1D-5117 | [1] | NUT | |
| 25. | 1D-4719 | [1] | NUT | |
| 26. | 7F-3491 | [2] | WASHER | |
| THE FOLLOWING REPAIR KIT IS AVAILABLE: | ||||
| 3N-3763 | [1] | KIT (insulator) | ||
| (Includes insulator,bushings and washer) | ||||
#UEG0807S0068
9G-5585: STARTING MOTOR GP-ELECTRIC
9G5585 ELECTRIC STARTING MOTOR GROUP--24 Volt--Delco-Remy--Part 3 of 3
Serial No. 45P1512 to 45P1514 & 45P1516-Up
Part of 6N1889 Electric Starting Motor Group listed on Page 26C-2
Serial No. 45P1512 to 45P1514 & 45P1516-Up
Part of 6N1889 Electric Starting Motor Group listed on Page 26C-2
Parts for your 621B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9M-7606 | [1] | PLUNGER ASSEM. | |
| 2. | 4M-0188 | [1] | WASHER | |
| 3. | 4M-1829 | [1] | BOOT | |
| 4. | 4M-1828 | [1] | RETAINER | |
| 5. | 9M-7609 | [1] | SPRING | |
| 6. | 4M-1827 | [1] | RETAINER | |
| 7. | 1H-1023 | [1] | SEAL | |
| 8. | 4S-7899 | [1] | HOUSING ASSEM. | |
| (Includes) | ||||
| 9. | 9F-2547 | [1] | WICK | |
| 10. | 2B-4602 | [1] | PLUG | |
| 11. | 1M-9968 | [1] | BUSHING | |
| 12. | 2F-6678 | [1] | SEAL | |
| 13. | 4L-2729 | [1] | WASHER | |
| 14. | 4L-2729 | [1] | WASHER | |
| 15. | 4M-1853 | [1] | LEVER ASSEM. | |
| 16. | 3F-2617 | [1] | NUT | |
| 17. | 7L-2894 | [1] | GASKET | |
| 18. | 4M-1831 | [1] | PLUG | |
| 19. | 1S-0297 | [1] | HOUSING ASSEM. | |
| (Includes) | ||||
| 20. | 4M-1896 | [1] | BUSHING | |
| 21. | 4M-1833 | [5] | SCREW 38.10 mm(1.50 in.) long | |
| 7M-0336 | [1] | SCREW 22.23 mm(.875 in.) long | ||
| 22. | 6N-3826 A | [1] | DRIVE ASSEM. (480321) | |
| -OR- | ||||
| 1P-2508 | [1] | DRIVE ASSEM. (1894211) | ||
| (Includes) | ||||
| 23. | 9S-9774 | [1] | PINION | |
| 24. | 9M-7611 | [2] | RING | |
| 25. | 2D-6392 | [1] | SEAL | |
| 26. | 7F-4556 | [5] | BOLT | |
| 27. | 1L-4789 | [5] | LOCKWASHER | |
| 28. | 4M-0189 | [1] | SEAL | |
| 29. | 1M-9971 | [1] | SPACER | |
| 30. | 4M-1851 | [1] | GASKET | |
| 31. | 4M-1854 | [1] | SHAFT | |
| THE FOLLOWING REPAIR KITS ARE AVAILABLE FOR 1P2508 DRIVE ASSEM.: | ||||
| 7N-6098 | [1] | KIT (cup) | ||
| (Includes cup, spring and retainer) | ||||
| 4S-9459 | [1] | KIT (washer) | ||
| (Includes cup and washers) | ||||
| A | NOT PART OF THIS GROUP | |||
#UEG0807S0069
5S-9088: ALTERNATOR GP-CHARGING
5S9088 ALTERNATOR ASSEMBLY--24 Volt, 50 Ampere--Part 1 of 2
Standard with Serial No. 45P1512 to 45P1514 and 45P1516 to 45P2084 inclusive & Attachment with Serial No. 45P2085-Up
Part of 4N2286 & 6N8991 Alternator Groups shown on Pages 26K & 27
Standard with Serial No. 45P1512 to 45P1514 and 45P1516 to 45P2084 inclusive & Attachment with Serial No. 45P2085-Up
Part of 4N2286 & 6N8991 Alternator Groups shown on Pages 26K & 27
Parts for your 621B WHEEL TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-2260 | [1] | PLATE | |
| 2. | 9S-2544 | [4] | SCREW | |
| 3. | 8H-0878 | [6] | LOCKWASHER | |
| 4. | 9S-2438 | [2] | SCREW | |
| 5. | 7H-2079 | [7] | LOCKWASHER | |
| 6. | 9S-2255 | [1] | COVER | |
| 7. | 9S-2262 | [1] | GASKET | |
| 8. | 9S-2246 | [1] | LEAD ASSEM. | |
| 9. | 9S-9830 | [1] | SCREW | |
| 10. | 8F-1326 | [3] | WASHER | |
| 11. | 9B-7233 | [3] | LOCKWASHER (shake proof) | |
| 12. | 9S-9829 | [1] | SCREW ASSEM. | |
| 13. | 4B-2043 | [4] | NUT | |
| 14. | 7N-0129 C | [1] | REGULATOR ASSEM. | |
| 15. | 9S-2250 | [1] | GROMMET | |
| 16. | 9S-2542 | [1] | SCREW | |
| 17. | 9S-2437 | [5] | SCREW | |
| 18. | 9S-2389 | [1] | STUD ASSEM. | |
| 19. | 7N-0174 C | [1] | HOUSING ASSEM. | |
| (Includes) | ||||
| 20. | 9N-0943 | [1] | PLUG | |
| 21. | 5P-3418 | [1] | BEARING | |
| 22. | 9S-2396 | [1] | BUSHING | |
| 23. | 9S-2292 | [1] | HEAT SINK ASSEM. | |
| 24. | 9S-2300 | [4] | INSULATOR | |
| 25. | 9S-9830 | [4] | SCREW | |
| 9S-2247 | [4] | WASHER (spring) | ||
| 4B-4863 | [4] | WASHER (plain) | ||
| 26. | 9S-2007 | [3] | SCREW | |
| 27. | 9S-2301 | [1] | INSULATION | |
| 9S-2013 A | [1] | KIT (terminal relay) | ||
| (Consists of Bushing, "O" Ring and Hardware) | ||||
| 9S-2012 A | [1] | KIT (terminal output) | ||
| (Consists of Gaskets, Terminal and Hardware) | ||||
| 9S-2290 A | [1] | KIT (heat sink) | ||
| (Diode Junction Hardware) | ||||
| 9S-2291 A | [1] | KIT (heat sink) | ||
| (Positive Diode Hardware) | ||||
| A | NOT PART OF THIS GROUP | |||
| C | INDICATES CHANGE | |||
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
General Service Information
Engine News
Special Instruction
Installation of Emergency Starting Receptacles{1453, 1463}
Installation of Emergency Starting Receptacles{1453, 1463}
Installation of Emergency Starting Receptacles{1453, 1463}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Systems Operation
Testing and Adjusting
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
37-MT, 41-MT, and 42-MT Series Starting Motors
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
Starting Motor - Delco 50-MT
Starting Motor - Delco 50-MT
Starting Motor Continues to Operate after Start Switch Has Been Released
Starting Motor - Delco 50-MT
Starting Motor - Delco 50-MT
Disassembly and Assembly
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
1987/03/16




