AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

528 SKIDDER 51S00001-00128 (MACHINE) POWER TRAIN Caterpillar SIS



WHEEL SKIDDER 528 WHEEL SKIDDER 51S
 528 SKIDDER 51S00001-00128 (MACHINE) UEG0816S 528 51S   (1973)

Parts group 528:

  For full view, you need register
POWER TRAIN
AXLE GP
AXLE GROUP
8K-5929 AXLE GROUP
8K5929 AXLE GROUP--2 Required
WHEEL & FINAL DRIVE GP-FRONT
1V-6330 WHEEL & FINAL DRIVE GP-FRONT
1V6330 FRONT FINAL DRIVE AND WHEEL GROUP--2 Required
REAR FINAL DRIVE AND WHEEL GROUP
1V-5816 REAR FINAL DRIVE AND WHEEL GROUP
1V5816 REAR FINAL DRIVE AND WHEEL GROUP--2 Required
CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
1P-0568 CONTROL GP-TRANSMISSION HYD
1P568 TRANSMISSION HYDRAULIC CONTROL GROUP
Part of 3P9400 Transmission Arrangement shown on Page 28
3P9500 Valve parts are shown on Page 38
VALVE GP-PRESSURE CONTROL
3P-9443 VALVE GP-PRESSURE CONTROL
3P9443 PRESSURE CONTROL VALVE GROUP
Part of Selector and Pressure Control Valve shown on Page 38
DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
1V-6561 DIFFERENTIAL & BEVEL GEAR GP
FRONT DIFFERENTIAL AND BEVEL GEAR (1V6561 N/S)
1V6563 Differential parts are shown on Page 51B
DIFFERENTIAL & BEVEL GEAR GP
1V-6562 DIFFERENTIAL & BEVEL GEAR GP
REAR DIFFERENTIAL AND BEVEL GEAR (1V6562 N/S)
1V6563 Differential parts are shown on Page 51B
DIFFERENTIAL GP
1V-6563 DIFFERENTIAL GP
1V6563 DIFFERENTIAL GROUP
Part of Front and Rear Differential and Bevel Gear shown on Pages 50 and 51
DRIVE GP
DRIVE GP-PUMP
9K-8047 DRIVE GP-PUMP
9K8047 PUMP DRIVE GROUP
Part of 1V822 Supplemental Steering Arrangement listed on Page 70A
FILLER GP-POWER TRAIN OIL
FILLER GP-POWER TRAIN OIL
8K-5018 FILLER GP-POWER TRAIN OIL
TRANSMISSION OIL FILLER (8K5018 N/S)
FILTER GP
FILTER GP-TRANSMISSION
2S-6457 FILTER GP-TRANSMISSION
2s6457 TRANSMISSION FILTER GROUP
Part of 3P9400 Transmission Arrangement shown on Page 28
GEAR GP
GEAR GP-TRANSFER
3P-9399 GEAR GP-TRANSFER
TRANSFER GEAR (3P9399 N/S)--Part 1 of 2
Part of 3P9400 Transmission Arrangement shown on Page 28
3P-9399 GEAR GP-TRANSFER
TRANSFER GEAR (3P9399 N/S)--Part 2 of 2
Part of 3P9400 Transmission Arrangement shown on Page 28
1V6946 Brake parts are shown on Page 55
PUMP GP
PUMP GP-GEAR
3P-7958 PUMP GP-GEAR
3P7958 TRANSMISSION PUMP GROUP
Part of 3P9400 Transmission Arrangement shown on Page 28
SHAFT GP
DRIVE SHAFT GP
2V-1305 DRIVE SHAFT GP
2V1305 DRIVE SHAFT GROUP
8K5898 and 8K5915 Joint parts are shown on Page 46
SLIP JOINT GP
8K-5898 SLIP JOINT GP
8K5898 JOINT GROUP
Part of 2V1305 Drive Shaft Group shown on Page 45
SLIP JOINT GP
8K-5915 SLIP JOINT GP
8K5915 SLIP JOINT GROUP
Part of 2V1305 Drive Shaft Group shown on Page 45
TORQUE CONVERTER GP
TORQUE CONVERTER GP
1T-1030 TORQUE CONVERTER GP
1T1030 TORQUE CONVERTER GROUP
Part of Torque Converter shown on Page 31
TORQUE CONVERTER GP-W/HSG
9S-5220 TORQUE CONVERTER GP-W/HSG
TORQUE CONVERTER (9S5220 N/S)--Part 1 of 2
Part of 3P9400 Transmission Arrangement shown on Page 28
See Page 119 for Gasket Kit
9S-5220 TORQUE CONVERTER GP-W/HSG
TORQUE CONVERTER (9S5220 N/S)--Part 2 of 2
Part of 3P9400 Transmission Arrangement shown on Page 28
1T1030 Torque Converter parts are shown on Page 29
TRANSMISSION GP
TRANSMISSION AR
3P-9400 TRANSMISSION AR
3P9400 TRANSMISSION ARRANGEMENT--Side View
Torque Converter, Planetary Transmission, Transmission Case, Transmission Hydraulic Control,
2S6457 Filter, 3P7958 Pump and Transfer Gear parts are shown on Pages
30, 31, 34 through 37, 44, 45, 48 and 49
PLANETARY GP
9S-5226 PLANETARY GP
9S5226 PLANETARY TRANSMISSION GROUP--Part 1 of 2
Part of 3P9400 Transmission Arrangement shown on Page 28
9S-5226 PLANETARY GP
9S5226 PLANETARY TRANSMISSION GROUP--Part 2 of 2
Part of 3P9400 Transmission Arrangement shown on Page 28
CASE & COVERS GP-TMSN
1P-8577 CASE & COVERS GP-TMSN
TRANSMISSION CASE (1P8577 N/S)
Serial No. 51S1 to 51S121 and 51S125 inclusive
Part of 3P9400 Transmission Arrangement shown on Page 28
CASE & COVERS GP-TMSN
1P-8577 CASE & COVERS GP-TMSN
TRANSMISSION CASE (1P8577 N/S)
Serial No. 51S122 to 51S124 and 51S126-Up
Part of 3P9400 Transmission Arrangement shown on Page 28
PUMP GP-GEAR
3P-7958 PUMP GP-GEAR
3P7958 TRANSMISSION PUMP GROUP
Part of 3P9400 Transmission Arrangement shown on Page 28
SUPPORT GP-TRANSMISSION
8K-6140 SUPPORT GP-TRANSMISSION
TRANSMISSION SUPPORT (8K6140 N/S)
VALVE GP-SELECTOR
VALVE GP-SELECTOR
2P-1056 VALVE GP-SELECTOR
2P1056 SELECTOR VALVE GROUP--Type 1
Part of Selector and Pressure Control Valve shown on Page 38
VALVE GP-SELECTOR
2P-1056 VALVE GP-SELECTOR
2P1056 SELECTOR VALVE GROUP--Type 2
Part of Selector and Pressure Control Valve shown on Page 38
VALVE GP-SELECTOR & PRESS CONT
VALVE GP
3P-9500 VALVE GP
3P9500 SELECTOR AND PRESSURE CONTROL VALVE GROUP
Part of 1P568 Transmission Hydraulic Control Group shown on Page 37
3P9443 and 2P1056 Valve parts are shown on Pages 39 and 40
VALVE GP-TRANSMISSION CONTROL
CONTROL GP-TRANSMISSION HYD
1P-0568 CONTROL GP-TRANSMISSION HYD
1P568 TRANSMISSION HYDRAULIC CONTROL GROUP
Part of 3P9400 Transmission Arrangement shown on Page 28
3P9500 Valve parts are shown on Page 38
VALVE GP-PRESSURE CONTROL
3P-9443 VALVE GP-PRESSURE CONTROL
3P9443 PRESSURE CONTROL VALVE GROUP
Part of Selector and Pressure Control Valve shown on Page 38
WHEEL GP
DEMOUNTABLE RIM
9K-9989 DEMOUNTABLE RIM
DEMOUNTABLE RIM (9K9989 N/S)--4 Required
DEMOUNTABLE RIM GROUP
9K-9988 DEMOUNTABLE RIM GROUP
9K9988 DEMOUNTABLE RIM GROUP--4 Required
FOR USE WITH 30.5 x 32 TIRES WITH TUBES
AN ATTACHMENT
COOLER GP
LINES GP-TORQUE CONV COOLER
8K-9831 LINES GP-TORQUE CONV COOLER
8K9831 TORQUE CONVERTER COOLER LINES GROUP
COOLER GP-TORQUE CONVERTER OIL
2P-2490 COOLER GP-TORQUE CONVERTER OIL
TORQUE CONVERTER OIL COOLER (2P2490 N/S)

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Specifications
Wheel Brakes
528 SKIDDER AIR SYSTEM & BRAKES
Axle Housing (Front and Rear)<BR> 2V8495 (96C1-401, 97C1-294), 9C0638 (96C402-Up, 97C295-Up)
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Final Drives
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Wheel Bearing Adjustment
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Wheel Brakes
528 SKIDDER & 528 GRAPPLE SKIDDER AIR SYSTEM AND BRAKES
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Drive Axles
528 SKIDDER POWER TRAIN
Final Drives
528 SKIDDER POWER TRAIN
Wheel Brake Linings
528 SKIDDER POWER TRAIN
Wheel Brakes
528 SKIDDER POWER TRAIN
Wheel Assembly
528 SKIDDER POWER TRAIN
Final Drive Duo-Cone Seals
528 SKIDDER POWER TRAIN
Wheel Brake Discs
528 SKIDDER POWER TRAIN
Wheel Spindles
528 SKIDDER POWER TRAIN
Service Magazine
Prevent Damage To Brake Lining Before And During Installation{4254,4001}
1983/07/04
Salvage Procedures For Final Drive Planet Carrier {4093,4092,4050}
1984/01/16
Change To Lubricant Recommendations For Differential And Final Drives{3258,4070}
1984/02/20
Improved Retention Of Brake Disc To Wheel{4201,4255}
1988/12/05
Be Sure To Clean Axle Housing Completely After Final Drive Or Differential Failure {3260,3280,4051}
1993/01/18
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Technical Information Bulletin
3V-0197 BOLTS MAY NOT HAVE THE PROPER HEAT TREATMENT
3V-0197 BOLTS MAY NOT HAVE THE PROPER HEAT TREATMENT
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Governor Control<BR> (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE
Governor Control<BR> (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE
Transmission Hydraulic Controls
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Pressure Control Valve<BR> 3P0443 (51S1-51S287), 9P4468 (51S288-Up, 78W1-Up, 96C1-Up, 97C1-Up)
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Bench Test Procedures
Bench Test Procedure For A 528 Wheel Skidder Transmission {3030, 3073}
Bench Test Procedure For A 528 Wheel Skidder Transmission {3030, 3073}
Service Magazine
New Transmission Valve Groups Increase Winch Line Pull When Transmission Is In Neutral{3150,3152,3157,3167,3100}
1978/02/20
New Spool Assembly In Transmission Pressure Control Valve Group Helps Prevent Shift Hesitation{3167}
1990/06/25
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Special Instruction
Installation Of New Bevel Gear And Differential Case (Flange Half){3256, 3258}
Installation Of New Bevel Gear And Differential Case (Flange Half){3256, 3258}
Installation of New Bevel Gear and Differential Case (Flange Half){3258}
Installation of New Bevel Gear and Differential Case (Flange Half){3258}
Specifications
Differential and Bevel Gear
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Winch Drum And Bevel Gear Shaft
528 WINCH
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Salvage of Differential Carriers {3258, 3284}
Salvage of Differential Carriers {3258, 3284}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Front Differential (NoSpin)
528 SKIDDER POWER TRAIN
Rear Differential (NoSpin)
528 SKIDDER POWER TRAIN
Front And Rear Differential (Nospin)
528 SKIDDER POWER TRAIN
Bevel Gear
528 WINCH
Service Magazine
Change To Lubricant Recommendations For Differential And Final Drives{3258,4070}
1984/02/20
3.5&quot;, 4.0&quot;, 5.5&quot;, 5.75&quot; Socket Wrenches Available For Removal Of Differential Pinion Shaft Nuts{0601,3258}
1988/03/14
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
Be Sure To Clean Axle Housing Completely After Final Drive Or Differential Failure {3260,3280,4051}
1993/01/18
Special Instruction, REHS1282, "Installation of New Bevel Gear and Differential Case (Flange Half)"is Available {3258}
2002/03/04
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Salvage of Differential Carriers {3258, 3284}
Salvage of Differential Carriers {3258, 3284}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
3.5&quot;, 4.0&quot;, 5.5&quot;, 5.75&quot; Socket Wrenches Available For Removal Of Differential Pinion Shaft Nuts{0601,3258}
1988/03/14
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Specifications
Flexible Drive Coupling
3306 VEHICULAR ENGINE
Flexible Coupling Drive
3306 VEHICULAR ENGINE
Checking And Adjusting Alignment Of The Flexible Coupling Drive
3306 VEHICULAR ENGINE
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Disassembly and Assembly
Transfer Gears
528 SKIDDER POWER TRAIN
Service Magazine
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Tool Operating Manual
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
Specifications
Transmission Oil Filter
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Optional High Efficiency Filters Are Now Available {3004, 5068}
2003/07/07
Understanding Transmission Filter Plugging Events {3004, 3067}
2007/04/02
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Installation Of New Bevel Gear And Differential Case (Flange Half){3256, 3258}
Installation Of New Bevel Gear And Differential Case (Flange Half){3256, 3258}
Specifications
Transfer Gears
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Disassembly and Assembly
Engine, Transmission, Torque Converter And Transfer Gears
528 SKIDDER POWER TRAIN
Engine, Torque Converter, Transmission And Transfer Gears
528 SKIDDER POWER TRAIN
Transfer Gears
528 SKIDDER POWER TRAIN
Service Magazine
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Installation Of New Bevel Gear And Differential Case (Flange Half){3256, 3258}
Installation Of New Bevel Gear And Differential Case (Flange Half){3256, 3258}
Service Letter-NACD
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Wheel Brakes
528 SKIDDER AIR SYSTEM & BRAKES
Transmission Oil Filter
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Transmission Oil Pump
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Axle Housing (Front and Rear)<BR> 2V8495 (96C1-401, 97C1-294), 9C0638 (96C402-Up, 97C295-Up)
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Final Drives
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Wheel Bearing Adjustment
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Supports For Winch Drive Shaft
528 WINCH
Winch Drive Shaft
528 WINCH
Wheel Brakes
528 SKIDDER & 528 GRAPPLE SKIDDER AIR SYSTEM AND BRAKES
Service Letter-China
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Center Bottom Guards
3306 VEHICULAR ENGINE FOR 528 SKIDDER
Tires And Rims
528 SKIDDER POWER TRAIN
Final Drives
528 SKIDDER POWER TRAIN
Wheel Brake Linings
528 SKIDDER POWER TRAIN
Wheel Brakes
528 SKIDDER POWER TRAIN
Wheel Assembly
528 SKIDDER POWER TRAIN
Final Drive Duo-Cone Seals
528 SKIDDER POWER TRAIN
Wheel Brake Discs
528 SKIDDER POWER TRAIN
Wheel Spindles
528 SKIDDER POWER TRAIN
Transmission Oil Pump
528 SKIDDER POWER TRAIN
Front Differential (NoSpin)
528 SKIDDER POWER TRAIN
Rear Differential (NoSpin)
528 SKIDDER POWER TRAIN
Front And Rear Differential (Nospin)
528 SKIDDER POWER TRAIN
Emergency And Parking Brake
528 SKIDDER POWER TRAIN
Transmission Control Valves
528 SKIDDER POWER TRAIN
Transfer Gears
528 SKIDDER POWER TRAIN
Transmission Oil Pump
528 SKIDDER VEHICLE SYSTEMS
Brake Control Valve
528 SKIDDER VEHICLE SYSTEMS
Service Magazine
Prevent Damage To Brake Lining Before And During Installation{4254,4001}
1983/07/04
Salvage Procedures For Final Drive Planet Carrier {4093,4092,4050}
1984/01/16
Change To Lubricant Recommendations For Differential And Final Drives{3258,4070}
1984/02/20
Stronger Shoe Used In Parking Brake{4267}
1984/04/09
Make Sure New Tire Is Adaptable To Rim{4203,4202}
1984/11/05
Brake Valve Repair Kit Available{4250,4265}
1985/08/19
New Brake Control Valve Used{4265}
1986/10/27
New Engine Mount Keeps Forces Caused From Engine Side-To-Side Movement Away From The Frame Of The Vehicle{1152}
1977/03/21
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Increased Clearance Between Bottom Guard And Transmission Case{7153}
1977/06/20
New Clutch Discs In Speed Clutches Of Power Shift Transmissions{3155}
1978/04/24
New Wheel Rim Assemblies Used; Improved Wheel Rim Assemblies Available{4202}
1988/10/17
Improved Retention Of Brake Disc To Wheel{4201,4255}
1988/12/05
Different O-Ring Seal Used Between Torque Converter Housing And Flywheel Housing{3105,1157,3101}
1979/12/24
Use Grease Gun Adapter To Lubricate Certain U-joints {0645,3251,3253}
1989/05/29
New Spool Assembly In Transmission Pressure Control Valve Group Helps Prevent Shift Hesitation{3167}
1990/06/25
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Service Magazine
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Specifications
Transmission Oil Pump
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Hydraulic Gear Pumps Used in Transmissions {3066, 5073}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Transmission Oil Pump
528 SKIDDER POWER TRAIN
Transmission Oil Pump
528 SKIDDER VEHICLE SYSTEMS
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Service Magazine
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2009/01/26
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Specifications
Supports For Winch Drive Shaft
528 SKIDDER WINCH & FAIRLEAD
Drive Shaft
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Supports For Winch Drive Shaft
528 WINCH
Winch Drive Shaft
528 WINCH
Winch Drive Shaft
528 GRAPPLE SKIDDER WINCH AND CONTROL
Supports For Winch Drive Shaft
528 GRAPPLE SKIDDER WINCH AND CONTROL
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Disassembly and Assembly
Accessory Drive Housing And Shaft
3306 VEHICULAR ENGINE FOR 528 SKIDDER
Center Bottom Guards
3306 VEHICULAR ENGINE FOR 528 SKIDDER
Service Magazine
Increased Clearance Between Bottom Guard And Transmission Case{7153}
1977/06/20
Use Grease Gun Adapter To Lubricate Certain U-joints {0645,3251,3253}
1989/05/29
Lubricate Main Drive Shaft U-Joint Every 250 Service Meter Hours or One Month {3251}
1989/10/09
Machine Articulation Changed To Improve Driveline Life; Procedure To Add Spacers To Steering Stop Blocks {7188,3251,7051}
1994/01/24
Reuse And Salvage Guidelines
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Service Magazine
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
New Infrared Thermometer Has Narrow, 50:1 Target Ratio, Wide Temperature Range {0776, 1350, 3000, 4000, 4150, 4250}
2006/03/01
Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Special Instruction
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
<NOBR>439-3938</NOBR>, <NOBR>439-3939</NOBR>, <NOBR>439-3940</NOBR>, <NOBR>439-3941</NOBR>, <NOBR>439-3942</NOBR>, <NOBR>439-3943</NOBR> Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
439-3938, 439-3939, 439-3940, 439-3941, 439-3942, 439-3943 Link Bracket Assemblies {0374, 0599, 0632, 0700, 7000}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Special Instruction
Installation of Torque Converter Sleeve Bearings{3135}
Installation of Torque Converter Sleeve Bearings{3135}
Specifications
Torque Converter
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Torque Converter Group
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Pump Drive
528 SKIDDER SUPPLEMENTAL STEERING SYSTEM
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Salvage of Center Bearing in Torque Converter Input Housing {3101, 3127}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Carrier - Seal Ring Bore {0374, 0599, 0679, 3101, 3135}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Torque Converter Input Housing {0679, 3101, 3127}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Adapter Housing And Pump Drive (Grapple)
528 WINCH SERIAL NUMBERS: (51S1-51S287, 78W1-UP)
Engine, Transmission, Torque Converter And Transfer Gears
528 SKIDDER POWER TRAIN
Engine, Torque Converter, Transmission And Transfer Gears
528 SKIDDER POWER TRAIN
Torque Converter
528 SKIDDER POWER TRAIN
Service Magazine
Reconditioning Torque Converter Parts With Sleeve Bearings{3101}
1982/07/05
New Retainer Used Between Bolt And Gear In The Torque Converter{3101}
1979/04/23
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
Different O-Ring Seal Used Between Torque Converter Housing And Flywheel Housing{3105,1157,3101}
1979/12/24
Remove Burrs On Bearing Retaining Ring In Torque Converter {3127,3101,3105}
1990/03/26
Improved Torque Converter Stator Carriers Increase Output Shaft Bearing Service Life {3101,3130,3135}
1997/11/17
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Recommendations for Rebuilding Torque Converter Freewheel Stators on All Cat Products {3101, 3129}
Special Instruction
Installation Of Transmission Mounting Brackets{3176}
Installation Of Transmission Mounting Brackets{3176}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Specifications
Planetary Transmission<BR> 9S5226 (51S1-51S287), 8P8277 (52S288-Up, 78W1-Up, 96C1-Up, 97C1-Up)
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Transmission Oil Pump
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Transmission Support
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Engine Mounting Bolts
3306 VEHICULAR ENGINE
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Procedure to Salvage the Slots for the Pin and Holes for the Reaction Dowel in Transmission Clutch Plates, Pistons, and Housings {3030, 3050, 3169, 3170, 3190}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Housing Piston Bore {0679, 3160, 3169}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Clutch Piston Inside Diameter {0679, 3160, 3170}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Testing And Adjusting
528 SKIDDER POWER SHIFT TRANSMISSION
Bench Test Procedures
Bench Test Procedure For A 528 Wheel Skidder Transmission {3030, 3073}
Bench Test Procedure For A 528 Wheel Skidder Transmission {3030, 3073}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission Oil Pump
528 SKIDDER POWER TRAIN
Engine, Transmission, Torque Converter And Transfer Gears
528 SKIDDER POWER TRAIN
Engine, Torque Converter, Transmission And Transfer Gears
528 SKIDDER POWER TRAIN
Transmission
528 SKIDDER POWER TRAIN
Transmission Oil Pump
528 SKIDDER VEHICLE SYSTEMS
Service Magazine
New Engine Mount Keeps Forces Caused From Engine Side-To-Side Movement Away From The Frame Of The Vehicle{1152}
1977/03/21
Improved 5P3000 Engine And Transmission Shipping Stand Assembly; Modification Available For Stands Already In Use{0640}
1977/04/25
Increased Clearance Between Bottom Guard And Transmission Case{7153}
1977/06/20
New Clutch Discs In Speed Clutches Of Power Shift Transmissions{3155}
1978/04/24
Improved Seal Rings For Rotating Clutches, Torque Converters, And Transfer Gear Cases{3101,3155,3159}
1979/12/10
New Spool Assembly In Transmission Pressure Control Valve Group Helps Prevent Shift Hesitation{3167}
1990/06/25
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Disassembly and Assembly
Transmission Control Valves
528 SKIDDER POWER TRAIN
Service Magazine
New Spool Assembly In Transmission Pressure Control Valve Group Helps Prevent Shift Hesitation{3167}
1990/06/25
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Specifications
Selector Valve<BR> 2P1056 (51S1-51S287), 9P4469 (51S288-Up, 78W1-Up, 96C1-Up, 97C1-Up)
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Transmission Hydraulic Controls
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Pressure Control Valve<BR> 3P0443 (51S1-51S287), 9P4468 (51S288-Up, 78W1-Up, 96C1-Up, 97C1-Up)
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Bench Test Procedures
Bench Test Procedure For A 528 Wheel Skidder Transmission {3030, 3073}
Bench Test Procedure For A 528 Wheel Skidder Transmission {3030, 3073}
Disassembly and Assembly
Transmission Control Valves
528 SKIDDER POWER TRAIN
Service Magazine
New Transmission Valve Groups Increase Winch Line Pull When Transmission Is In Neutral{3150,3152,3157,3167,3100}
1978/02/20
New Spool Assembly In Transmission Pressure Control Valve Group Helps Prevent Shift Hesitation{3167}
1990/06/25
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Salvage Procedures For Final Drive Planet Carrier {4093,4092,4050}
1984/01/16
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Special Instruction
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Specifications
Rim Group
528 SKIDDER & 528 GRAPPLE SKIDDER POWER TRAIN
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Disassembly and Assembly
Tires And Rims
528 SKIDDER POWER TRAIN
Final Drive Duo-Cone Seals
528 SKIDDER POWER TRAIN
Service Magazine
Salvage Procedures For Final Drive Planet Carrier {4093,4092,4050}
1984/01/16
Make Sure New Tire Is Adaptable To Rim{4203,4202}
1984/11/05
New Wheel Rim Assemblies Used; Improved Wheel Rim Assemblies Available{4202}
1988/10/17
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Service Magazine
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Assembly and Installation of Conventional Duo-Cone Seals{7561, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Inspection of the Duo-cone Seal Gp{4050, 4051, 7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Final Drive Steering System, Wheel Braking System, and Wheels & Tires Salvage and Reuse Manual Contents {4000, 4050, 4100, 4250, 4300}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Magazine
Salvage Procedures For Final Drive Planet Carrier {4093,4092,4050}
1984/01/16
Product Information Guide, SEBF1015, "Improving Component Durability" , "Final Drives and Differentials" is now available {3258, 3282, 4050}
2004/04/12
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
Determining the Severity of a Leak of the Duo-cone Seal Gp {4050, 4051, 7561}
2010/02/25

Truck sale:

Caterpillar 528, rohrverleger, Bau-Und Bergbauausrüstung
25.000 
Caterpillar 528, rohrverleger, Bau-Und Bergbauausrüstung
- pipelayers
WAGNER EQUIPMENT CO
CAT 528
USD $40,480 
CAT 528

EPJ Trading
1986 CAT 528
Call 
1986 CAT 528

NORTHWEST TRACTOR PARTS
Boring, Oregon
1979 CAT 528
Call 
1979 CAT 528

NORTHWEST TRACTOR PARTS
Boring, Oregon
 
 
CAT 528

NORTHWEST TRACTOR PARTS
Boring, Oregon
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.