AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9N6435 ROD AND PISTON GP-8 REQUIRED-TYPE 2 S/N 74V7444 TO 75V8226 INCLUSIVE. PART OF 9N5190 SHORT BLOCK GROUP 3208


BASIC ENGINE
PISTON & ROD GP
CYLINDER BLOCK GP
PISTON & ROD GP

MARINE ENGINE 3208 MARINE ENGINE 75V
 3208 MARINE ENGINE 75V00001-UP UEG0823S 3208 75V   (1974)

BASIC ENGINE

PISTON & ROD GP
PISTON & ROD GP
9N-6435 PISTON & ROD GP
PISTON & ROD GP
9N-3538 PISTON & ROD GP
PISTON & ROD GP
9N-6435 PISTON & ROD GP
PISTON & ROD GP
9N-6435 PISTON & ROD GP
4W-8261 RING GP-PISTON
PISTON GP
2W-4841 PISTON GP
 

#UEG0823S0050
 

9N-6435: PISTON & ROD GP

9N6435 ROD AND PISTON GP-8 REQUIRED-TYPE 2
S/N 74V7444 TO 75V8226 INCLUSIVE. PART OF 9N5190 SHORT BLOCK GROUP
c473668 UEG0823S
9N6435 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 [1] PIN-PISTON  
2. 8N-7294 C [2] RETAINER-PIN  
3. 9N-3504 [1] ROD AS-CONNECTING  
  9N-5082 C [1] BEARING-CONNECTING ROD  
4. 9N-3832 [2] BOLT-CONNECTING ROD  
  9L-7669 [2] NUT-CONNECTING ROD  
5. 9N-5790 [1] BEARING-CONNECTING ROD (STANDARD)  
  6N-9837 A [1] BEARING-CONNECTING ROD .254MM(.01IN)US  
  6N-9838 A [1] BEARING-CONNECTING ROD .508MM(.02IN)US  
  7N-4352 A [1] BEARING-CONNECTING ROD 1.27MM(.05IN)US  
6. 1W-5793 [1] PISTON GP (STANDARD)  
  1W-5792 C [1] BODY AS-PISTON  
7. 9L-6233 [1] RING-PISTON-TOP (STANDARD-COMPRESS)  
8. 9L-9316 [1] RING-PISTON (STANDARD-OIL)  
9. 1W-2071 A [1] PISTON GP  
    .508MM(.02IN)O.S.
  2W-8410 [1] BODY AS-PISTON  
10. 2W-8416 [1] RING-PISTON  
    (OVERSIZE OIL)
11. 9N-0581 [1] RING-PISTON-TOP  
    (O.S. COMPRESSION)
12. 1W-2073 A [1] PISTON GP  
    1.016MM(.04IN)O.S.
  1W-2072 C [1] BODY AS-PISTON  
13. 9L-9323 [1] RING-PISTON (OVERSIZE-OIL)  
14. 9N-0578 [1] RING-PISTON-TOP  
    (O.S. COMPRESSION)
  9N-0875 A [1] RING GP-PISTON  
    (INCLUDES COMPLETE
    SET OF RINGS FOR
    ONE STANDARD PISTON)
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0823S0051
 

9N-6435: PISTON & ROD GP

9N6435 ROD AND PISTON GP-8 REQUIRED
S/N 75V8227-UP. ALSO PART OF 9N5190 SHORT BLOCK GROUP
2W4841-PAGE 25A.02
c532640 UEG0823S
9N6435 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 [1] PIN-PISTON  
2. 7E-4728 [1] ROD AS-CONNECTING  
3. 9N-5082 [1] BEARING-CONNECTING ROD  
4. 9N-3832 [2] BOLT-CONNECTING ROD  
5. 9L-7669 [2] NUT-CONNECTING ROD  
6. 7E-7894 C [1] BEARING-ROD (STANDARD)  
  9N-5920 A [1] BEARING .25MM(.010IN)US  
  9N-5921 A [1] BEARING .51MM(.020IN)US  
  9N-5922 A [1] BEARING 1.27MM(.050IN)US  
7. 8N-7294 [2] RETAINER-PIN  
8. 2W-4841 Y [1] PISTON GP (STANDARD)  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#UEG0823S0052
 

4W-8261: RING GP-PISTON

4W8261 PISTON RING GROUP--.51 MM (.020 IN.) OVERSIZE
FOR EXCESS OIL CONSUMPTION. NOT FOR USE WITH TURBOCHARGED
ENGINES. AN ATTACHMENT
UEG0823S0052 UEG0823S
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
   
   
   
  4W-8260 [1] RING--TOP  
   
   
   
  2W-8416 [1] RING--OIL  
 

#UEG0823S0053
 

2W-4841: PISTON GP

2W4841 PISTON GP
S/N 75V8227-UP. PART OF 9N6435 CONNECTING ROD & PISTON GROUP
c552109 UEG0823S
2W4841 PISTON GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-6233 [1] RING-PISTON-TOP (COMPRESSION)  
2. 7E-7297 [1] RING AS-PISTON (OIL)  
3. 2W-4831 C [1] BODY AS-PISTON  
4. 2W-8411 A [1] BODY AS-PISTON  
  2W-8647 A [1] RING GP-PISTON 1.02MM(.04IN.)OVERSIZE  
  9N-0578 [1] RING-PISTON-TOP (COMPRESSION)  
  2W-8417 [1] RING-PISTON (OIL)  
5. 2W-8410 A [1] BODY AS-PISTON  
  2W-8646 A [1] RING GP-PISTON .51MM(.02IN.)OVERSIZE  
  9N-0581 [1] RING-PISTON-TOP (COMPRESSION)  
  2W-8416 [1] RING-PISTON (OIL)  
  2W-8265 CA [1] RING GP-PISTON (CONSISTS OF A COMPLETE  
    SET OF RINGS FOR ONE
    STANDARD PISTON)
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0823S0054
 

9N-2613: PISTON & ROD GP

9N2613 CONNECTING ROD AND PISTON GROUP-8 REQUIRED
SERIAL NO. 75V1 TO 75V2598 INCLUSIVE
PART OF 9N2139 SHORT BLOCK GROUP
c179178 UEG0823S
9N2613 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9889 [1] PIN  
2. 1J-6473 [2] RETAINER  
3. 9L-6272 R [1] ROD ASSEM.  
    (Includes)
  9L-8382 [1] BEARING  
4. 9L-8225 [2] BOLT  
  9L-7669 [2] NUT  
5. 9N-2601 [1] BEARING (standard)  
  9N-5921 CH [1] BEARING .51mm(.020 in.)U.S.  
  9N-5920 CH [1] BEARING .25mm(.010 in.) U.S.  
  9N-5922 CH [1] BEARING 1.27mm(.050 in.)U.S.  
6. 9L-6979 [1] PISTON GROUP (standard)  
    (Includes)
7. 9L-6233 [1] RING (standard compression)  
8. 9L-9316 [1] RING (standard-oil)  
9. 9N-0579 H [1] PISTON GROUP (.02 in. oversize)  
    (Includes)
10. 9L-9673 [1] RING (oversize-oil)  
11. 9N-0581 C [1] RING (oversize-compression)  
12. 9N-0580 H [1] PISTON GROUP (.04 in. oversize)  
    (Includes)
13. 9L-9323 [1] RING (oversize-oil)  
14. 9N-0578 [1] RING (oversize-compression)  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF CONNECTING ROD & PISTON
 

#UEG0823S0055
 

9N-2613: PISTON & ROD GP

9N2613 CONNECTING ROD AND PISTON GROUP-8 REQUIRED
SERIAL NO. 75V2599 TO 75V4001 INCLUSIVE
ALSO PART OF 9N2139 SHORT BLOCK GROUP
c179179 UEG0823S
9N2613 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 C [1] PIN  
2. 1J-6473 [2] RETAINER  
3. 9N-0407 R [1] ROD ASSEM.  
    (Includes)
  8N-0701 C [1] BEARING  
4. 9L-8225 [2] BOLT  
  9L-7669 [2] NUT  
5. 9N-2601 [1] BEARING (standard)  
  9N-5921 CH [1] BEARING .51mm(.020 in.) U.S.  
  9N-5920 CH [1] BEARING .25mm(.010 in.) U.S.  
  9N-5922 CH [1] BEARING 1.27mm(.050 in.)U.S.  
6. 9L-6979 [1] PISTON GROUP (standard)  
    (Includes)
7. 9L-6233 [1] RING (standard-compression)  
8. 9L-9316 [1] RING (standard-oil)  
9. 9N-0579 H [1] PISTON GROUP (.02 in. oversize)  
    (Includes)
10. 9L-9673 [1] RING (oversize-oil)  
11. 9N-0581 [1] RING (oversize-compression)  
12. 9N-0580 H [1] PISTON GROUP (.04 in. oversize)  
    (Includes)
13. 9L-9323 [1] RING (oversize-oil)  
14. 9N-0578 [1] RING (oversize-compression)  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
  H   NOT PART OF CONNECTING ROD & PISTON
 

#UEG0823S0056
 

4W-8269: RING GP-PISTON

4W8269 PISTON RING GROUP--1.02 MM (.040 IN.) OVERSIZE
FOR EXCESS OIL CONSUMPTION. NOT FOR USE WITH TURBOCHARGED ENGINES
AN ATTACHMENT
UEG0823S0056 UEG0823S
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
   
   
  4W-8268 [1] RING  
   
   
   
   
  2W-8417 [1] RING  
 

#UEG0823S0057
 

1N-3085: PISTON & ROD GP

1N3085 CONNECTING ROD AND PISTON GROUP-8 REQUIRED-TURBOCHARGED ENGINE
SERIAL NO. 75V5524 TO 75V5844 INCLUSIVE
c178110 UEG0823S
1N3085 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 [1] PIN  
2. 8N-8064 [2] RETAINER  
3. 9N-3504 [1] ROD ASSEM.  
    (Includes)
  9N-5082 C [1] BEARING  
4. 9N-3832 [2] BOLT  
  9L-7669 [2] NUT  
5. 9N-5790 [1] BEARING (standard)  
  9N-5920 H [1] BEARING .25 mm(.010 in.) undersize  
  9N-5921 H [1] BEARING .51 mm(.020 in.) undersize  
  9N-5922 H [1] BEARING 1.27 mm (.050 in.) undersize  
6. 1N-3064 [1] BODY ASSEM.  
7. 9L-9316 J [1] RING (oil)  
8. 9L-6233 J [1] RING (top)  
  9N-0875 [1] RING GROUP  
    (Includes Parts Marked j)
  C   INDICATES CHANGE
  H   NOT PART OF 1N3085 CONNECTING ROD & PISTON GROUP
 

#UEG0823S0058
 

9L-6065: COVER GP-CYLINDER BLOCK

9L6065 CYLINDER BLOCK COVER GP
ALSO PART OF 9N1250, 6N4086, 9N2139, 9N5190, & 9N3763 SHORT BLOCK GPS
c456469 UEG0823S
9L6065 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5B-1866 [1] PLUG-CUP  
2. 9N-0575 [1] DOWEL  
 

#UEG0823S0059
 

1N-3563: PISTON & ROD GP

1N3563 CONNECTING ROD AND PISTON GROUP-8 REQUIRED-TURBOCHARGED ENGINE
SERIAL NO. 75V5845-UP
c178114 UEG0823S
1N3563 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9803 [1] PIN-PISTON  
2. 8N-7294 C [2] RETAINER-PIN  
3. 9N-3504 [1] ROD AS-CONNECTING  
  9N-5082 C [1] BEARING-CONNECTING ROD  
4. 9N-3832 [2] BOLT-CONNECTING ROD  
  9L-7669 [2] NUT-CONNECTING ROD  
5. 9N-5790 [1] BEARING-CONNECTING ROD (STANDARD)  
  9N-5920 A [1] BEARING .25MM(.010IN)UNDERSIZE  
  9N-5921 A [1] BEARING .51MM(.020IN)UNDERSIZE  
  9N-5922 A [1] BEARING 1.27MM(.050IN)UNDERSIZE  
6. 1N-3227 [1] BODY AS-PISTON  
7. 9L-9316 [1] RING-PISTON (OIL)  
8. 9L-6233 [1] RING-PISTON-TOP  
  9N-0875 A [1] RING GP-PISTON (INCLUDES A COMPLETE SET  
    OF RINGS FOR ONE PISTON)
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods
1979/01/24
New Piston And Connecting Rod Are Tapered In Area Of Piston Pin
1979/03/14
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspect Piston Skirts During Engine Overhaul Procedures
1981/07/01
Top Rings For Pistons Have Two Designs
1981/08/26
List Of Main And Connecting Rod Bearings Currently Available
1982/06/16
Carbon Cutting On Piston Top Land
1982/06/16
New Compression Ring Available For Control Of Excessive Oil Consumption
1982/09/22
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
New Piston Design
1983/01/19
Parts Service Information For Pistons
1983/02/16
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure
1983/04/27
New Piston Oil Rings
1983/09/14
Parts Service Information For Pistons
1984/01/18
Remanufactured Connecting Rod Assemblies
1984/02/22
New Main And Connecting Rod Bearings Have Copper Bond Material
1984/10/03
Additional Zinc Rods Improve Service Life Of Sea Water Heat Exchanger
1985/04/01
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
New Connecting Rod and Main Bearing Kits Available
1989/11/01
Parts Service Information For Pistons
1990/05/01
Installation Of Zinc Rods In Caterpillar Marine Engines
1991/01/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/10/12
Excessive Oil Consumption Can Be Caused By Dirt In Air Inlet System Or By Flaking Of The Piston Compression Ring
1977/12/14
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Special Instruction
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod
3208 INDUSTRIAL & MARINE ENGINES
Pistons And Rings
3208 INDUSTRIAL & MARINE ENGINES
Bearings For Connecting Rods And Mains
3208 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Connecting Rod Bearings
3208 INDUSTRIAL & MARINE ENGINES
Pistons & Connecting Rod Assemblies
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Inspect Piston Skirts During Engine Overhaul Procedures{1214,1213}
1981/06/08
Top Rings For Pistons Have Two Designs{1215,1214}
1981/07/13
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
New Compression Ring Available For Control Of Excessive Oil Consumption{1215}
1982/08/16
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Piston Design Decreases Oil Consumption{1214,1215}
1982/12/20
Parts Service Information For Pistons{1214,1225}
1983/01/31
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18
Installation Of Bearing For Connecting Rod Piston Pin{1219}
1983/05/09
Reuse Of Engine Bearings{1230}
1983/05/16
New Piston Oil Rings{1215}
1983/09/05
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Parts Service Information For Pistons{1214,1225}
1984/01/09
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
Additional Zinc Rods Improve Service Life Of Sea Water Heat Exchanger{1379}
1985/04/08
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/10/17
Excessive Oil Consumption Can Be Caused By Dirt In Air Inlet System Or By Flaking Of The Piston Compression Ring{1213,1215}
1977/12/12
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods{0622,1214,1218}
1979/01/15
New Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218,1219}
1979/03/05
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30
Parts Service Information For Pistons{1214,1225,1331}
1990/05/14
Installation Of Zinc Rods In Caterpillar Marine Engines{1350,1388}
1990/12/24
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13

Caterpillar Parts SIS Catalog 3208 :

PISTON & ROD GP
9N-3538 PISTON & ROD GP
PISTON & ROD GP
9N-6435 PISTON & ROD GP
PISTON & ROD GP
9N-0150 PISTON & ROD GP
PISTON & ROD GP
9L-6980 PISTON & ROD GP
PULLEY GP-CRANKSHAFT
9L-7461 PULLEY GP-CRANKSHAFT
CAMSHAFT GP
9N-0728 CAMSHAFT GP
SEAL GP-CRANKSHAFT
9N-0542 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
9N-0542 SEAL GP-CRANKSHAFT
PISTON & ROD GP
9N-6435 PISTON & ROD GP
4W-8261 RING GP-PISTON
PISTON GP
2W-4841 PISTON GP
PISTON & ROD GP
9N-2613 PISTON & ROD GP
PISTON & ROD GP
9N-2613 PISTON & ROD GP
4W-8269 RING GP-PISTON
PISTON & ROD GP
1N-3085 PISTON & ROD GP
COVER GP-CYLINDER BLOCK
9L-6065 COVER GP-CYLINDER BLOCK

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.