AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9L6584 COVER GP-CYLINDER BLOCK ALSO PART OF 6N3029 SHORT BLOCK GROUP 3208 MARINE ENGINE


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

MARINE ENGINE 3208 MARINE ENGINE 75V
 3208 MARINE ENGINE 75V00001-UP UEG0823S 3208 75V   (1974)

BASIC ENGINE

CYLINDER BLOCK GP
9N-5190 CYLINDER BLOCK GP-SHORT
COVER GP-CYLINDER BLOCK
9L-6065 COVER GP-CYLINDER BLOCK
COVER GP-CYLINDER BLOCK
9L-6584 COVER GP-CYLINDER BLOCK
 

#UEG0823S0060
 

9L-6584: COVER GP-CYLINDER BLOCK

9L6584 COVER GP-CYLINDER BLOCK
ALSO PART OF 6N3029 SHORT BLOCK GROUP
c147385 UEG0823S
9L6584 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-7172 [1] DOWEL  
2. 5B-1866 [1] PLUG  
 

#UEG0823S0061
 

6N-1737: CYLINDER HEAD GP

6N1737 CYLINDER HEAD GROUP
c152338 UEG0823S
6N1737 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1329 [2] BOLT (Location "E")  
2. 3H-7654 [36] WASHER  
3. 0S-1590 [1] BOLT 1.125 in.(2.86 cm) long  
    (Location "C"-Left Head)
4. 9L-9166 [1] STUD BOLT 3.6 in.(9.14 cm)  
    (Location "C"-Right Head)
5. 5M-6213 [4] PLUG  
6. 5B-9603 [6] BOLT (Location "D")  
7. 9L-9164 [2] GASKET  
8. 9L-7627 [2] HEAD ASSEM.  
    (Each Includes)
  9L-7657 [1] PLUG  
9. 9L-7622 [4] INSERT (exhaust)  
10. 0L-1329 [3] BOLT (Location "H")  
11. 8M-5860 [4] PLUG  
12. 9L-9190 [16] SPRING (Outer)  
13. 9L-9425 [16] RETAINER  
14. 2A-4429 [32] LOCK  
15. 9L-8889 [16] WASHER  
16. 9L-9172 [16] SPRING (Inner)  
17. 9L-7682 [8] VALVE (Intake)  
  2N-8943 H [8] INSERT (Intake)  
18. 2B-0947 [8] BOLT (Location "G")  
19. 2B-2006 [12] BOLT (Location "F")  
20. 6F-5282 [8] BOLT (Location "A")  
21. 9L-7683 [8] VALVE (exhaust)  
22. 9L-7657 [2] PLUG  
  H   NOT PART OF CYLINDER HEAD GROUP
 

#UEG0823S0062
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP*R
SERIAL NO. 75V1447 TO 75V1475 INCLUSIVE
c168363 UEG0823S
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-4850 C [8] BOLT 7.62 cm(3 in.) long-Location "E"  
2. 3H-7654 [36] WASHER  
3. 0S-1571 [1] BOLT 4.44 cm(1.75 in.) long Location "C" - Left Head  
  9L-9166 [1] STUDBOLT 9.14 cm(3.6 in.) long-Right Head  
4. 9L-9164 C [2] GASKET  
5. 5M-6213 [4] PLUG  
6. 5B-9603 [6] BOLT 12.7 cm(5 in.) long-Location "D"  
7. 9L-7683 [8] VALVE (exhaust)  
8. 9L-7627 [2] HEAD ASSEM.  
    (Each Includes)
  9L-7657 [1] PLUG  
9. 9L-7622 [4] INSERT (exhaust)  
10. 0L-1329 [3] BOLT 7.62 cm(3 in.) long-Location "H"  
11. 8M-5860 [4] PLUG  
12. 9L-9190 [16] SPRING  
13. 9L-9425 [16] RETAINER  
14. 2A-4429 [32] LOCK  
15. 9L-8889 [16] WASHER  
16. 9N-0906 [16] SPACER  
17. 9L-7682 C [8] VALVE (Intake)  
  2N-8943 H [8] INSERT (Intake)  
18. 5P-4849 C [8] BOLT 5.71 cm(2.25 in.)long-Location "G"  
19. 5P-4851 C [8] BOLT 12 cm(4.75 in.) long-Location "F"  
20. 5P-4852 C [8] BOLT 13.3 cm(5.25 in.) long-Location "A"  
  C   INDICATES CHANGE
  H   NOT PART OF CYLINDER HEAD GROUP
 

#UEG0823S0063
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP*R
SERIAL NO. 75V1476 TO 75V3021 INCLUSIVE
c215680 UEG0823S
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1329 C [8] BOLT 7.62 cm(3 in.) long-Location "E"  
2. 3H-7654 [36] WASHER  
3. 0S-1571 [1] BOLT 4.44 cm(1.75 in.) Location "C" - Left Head  
  9L-9166 [1] STUDBOLT 9.14 cm(3.6 in.) long-Right Head  
4. 9L-9164 [2] GASKET  
5. 5M-6213 C [3] PLUG  
6. 5B-9603 [6] BOLT 12.7 cm(5 in.) long-Location "D"  
7. 9L-7683 [8] VALVE (exhaust)  
8. 9N-3111 C [2] HEAD ASSEM.  
    (Each Includes)
  9L-7657 [1] PLUG  
9. 9N-2837 [4] INSERT (exhaust)  
10. 0L-1329 [3] BOLT 7.62 cm(3 in.) long-Location "H"  
11. 8M-5860 [4] PLUG  
12. 5M-6214 [1] PLUG  
13. 9L-9425 [16] RETAINER  
14. 2A-4429 [32] LOCK  
15. 9L-8889 [16] WASHER  
16. 9N-0906 [16] SPACER  
17. 9L-7682 [8] VALVE (Intake)  
  2N-8943 H [8] INSERT (Intake)  
18. 2B-0947 C [8] BOLT 5.71 cm(2.25 in.)long-Location "G"  
19. 2B-2006 C [12] BOLT 12 cm(4.75 in.) long-Location "F"  
20. 6F-5282 C [8] BOLT 13.3 cm(5.25 in.) long-Location "A"  
21. 9N-3387 C [16] SPRING  
22. 7H-3171 C [1] PLUG  
  C   INDICATES CHANGE
  H   NOT PART OF CYLINDER HEAD GROUP
 

#UEG0823S0064
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP*R
SERIAL NO. 75V3022 TO 75V7539 INCLUSIVE
c227148 UEG0823S
9N1105 CYLINDER HEAD GP Parts scheme 9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7H-3171 [1] PLUG-PIPE  
2. 5M-6213 [3] PLUG-PIPE  
3. 0L-1329 [8] BOLT (1/2-13X3 IN)(LOCATION E)  
4. 3H-7654 [36] WASHER-HARD (13.5X22.5X3MM THK)  
5. 5B-9603 [6] BOLT (3/8-16X5 IN)(LOCATION D)  
6. 6F-5282 [8] BOLT (1/2-13X5.25 IN)(LOCATION A)  
7. 2B-2006 [12] BOLT (1/2-13X4.75 IN)(LOCATION F)  
8. 2B-0947 [8] BOLT (1/2-13X2.25 IN)(LOCATION G)  
9. 9N-3111 [2] CYLINDER HEAD AS  
    (EACH INCLUDES)
  9L-7657 [1] PLUG-CUP  
10. 9N-2837 [4] INSERT-SEAT (EXHAUST)  
11. 0L-1329 [3] BOLT (1/2-13X3 IN)(LOCATION H)  
12. 8M-5860 [4] PLUG-CUP  
13. 5M-6214 [1] PLUG-PIPE  
14. 5M-6213 [1] PLUG-PIPE  
15. 0S-1571 [1] BOLT (3/8-16X1.75 IN)(LOCATION C-LEFT HEAD)  
  9L-9166 [1] STUDBOLT (3/8-16X3.63 IN)(LEFT HEAD)  
16. 9L-8889 [16] WASHER  
17. 9N-3387 [16] SPRING-VALVE OUTER  
18. 9L-9425 [16] RETAINER-SPRING  
19. 2A-4429 [32] LOCK-RETAINER  
20. 9L-9164 [2] GASKET-CYLINDER HEAD  
21. 9L-7683 [8] VALVE-EXHAUST  
22. 9L-7682 [8] VALVE-INLET  
  2N-8943 A [8] INSERT-VALVE SEAT (INLET)  
23. 9N-0906 [16] SPACER  
 

#UEG0823S0065
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP*R
SERIAL NO. 75V7540 TO 75V7754 INCLUSIVE
1W6221-PAGE 29D
c304319 UEG0823S
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6221 CY [2] HEAD GROUP  
2. 9L-7657 [2] PLUG  
3. 6F-5282 [8] BOLT (LOCATION A)  
4. 9L-9164 [2] GASKET  
5. 0S-1571 [1] BOLT 4.44CM(1.75IN.) (LEFT HEAD)  
6. 5B-9603 [6] BOLT (LOCATION D)  
7. 0L-1329 [8] BOLT (LOCATION E)  
8. 2B-2006 [12] BOLT (LOCATION F)  
9. 2B-0947 [8] BOLT (LOCATION G)  
10. 5M-6213 [4] PLUG  
11. 3H-7654 [36] WASHER  
12. 7H-3171 [1] PLUG (LEFT HEAD)  
13. 5M-6213 [1] PLUG (RIGHT HEAD)  
14. 5M-6214 [2] PLUG  
15. 9L-9166 [1] STUDBOLT 9.14CM(3.6IN.) LONG (RIGHT HEAD)  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0823S0066
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP*R
SERIAL NO. 75V7755 TO 75V8178 INCLUSIVE
1W4241-PAGE 29F
c237233 UEG0823S
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4241 RCY [2] HEAD GROUP  
    (Separate Illustration)
2. 9L-7657 [2] PLUG  
3. 6F-5282 [8] BOLT (location A)  
4. 9L-9164 [2] GASKET  
5. 0S-1571 [1] BOLT 4.44cm(1.75 in.)long (Left Head)  
6. 5B-9603 [6] BOLT (Location D)  
7. 0L-1329 [8] BOLT (Location E)  
8. 2B-2006 [12] BOLT (Location F)  
9. 2B-0947 [8] BOLT (Location G)  
10. 5M-6213 [4] PLUG  
11. 3H-7654 [36] WASHER  
12. 7H-3171 [1] PLUG (Left Head)  
  5M-6213 [1] PLUG (Right Head)  
13. 2B-0858 [2] PLUG  
14. 9L-9166 [1] STUDBOLT 9.14cm(3.6 in.) long (Right Head)  
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0823S0067
 

9N-1105: CYLINDER HEAD GP

9N1105 CYLINDER HEAD GROUP*R
SERIAL NO. 75V8179-UP
1W4241-PAGE 29F
c329434 UEG0823S
9N1105 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-4241 RY [2] HEAD GP.  
2. 9L-7657 [2] PLUG  
3. 6F-5282 [8] BOLT (LOCATION A)  
4. 4W-0045 C [2] GASKET  
5. 0S-1571 [1] BOLT 4.44CM(1.75IN.)LG.  
    (LEFT HEAD)
6. 5B-9603 [6] BOLT (LOCATION D)  
7. 0L-1329 [8] BOLT (LOCATION E)  
8. 2B-2006 [12] BOLT (LOCATION F)  
9. 2B-0947 [8] BOLT (LOCATION G)  
10. 5M-6213 [4] PLUG  
11. 3H-7654 [36] WASHER  
12. 7H-3171 [1] PLUG (LEFT HEAD)  
  5M-6213 [1] PLUG (RIGHT HEAD)  
13. 2B-0858 [2] PLUG  
14. 9L-9166 [1] STUDBOLT 9.14CM(3.6IN.)  
    LONG (RIGHT HEAD)
  R   REMFG PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0823S0068
 

1W-6221: CYLINDER HEAD GP

1W6221 CYLINDER HEAD GP
S/N 75V7540 TO 75V7754 INCLUSIVE
PART OF 9N1105 CYLINDER HEAD GP
c182301 UEG0823S
1W6221 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 1W-4260 [8] RETAINER-SPRING  
3. 1W-4259 [8] SPRING-VALVE  
4. 9N-5565 [8] WASHER-SPRING SEAT  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET  
6. 9N-5819 [1] CYLINDER HEAD AS  
7. 9N-2837 [4] INSERT-SEAT EXHAUST  
  2N-8943 [4] INSERT-INTAKE  
8. 8M-5860 [4] PLUG-CUP  
9. 9L-7657 [1] PLUG-CUP  
10. 5M-6214 [1] PLUG-PIPE  
11. 0L-1329 [3] BOLT  
12. 5M-6213 [1] PLUG  
 

#UEG0823S0069
 

1W-4241: CYLINDER HEAD GP

1W4241 CYLINDER HEAD GROUP*R
S/N 75V7755 - 8509
PART OF 9N1105 CYLINDER HEAD
c180948 UEG0823S
1W4241 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-4429 [16] LOCK-RETAINER  
2. 1W-4260 [8] RETAINER-SPRING  
3. 1W-4259 [8] SPRING-VALVE  
4. 9N-5565 [8] WASHER-SPRING SEAT  
5. 9L-7683 [4] VALVE-EXHAUST  
  9L-7682 [4] VALVE-INLET  
6. 9N-5819 [1] CYLINDER HEAD AS  
7. 9N-2837 [4] INSERT-SEAT EXHAUST  
  2N-8943 [4] INSERT-INTAKE  
8. 8M-5860 [4] PLUG-CUP  
9. 9L-7657 B [1] PLUG-CUP  
10. 2B-0858 B [1] PLUG-PIPE  
11. 0L-1329 B [3] BOLT  
12. 5M-6213 B [1] PLUG  
  2N-1287 BF [1] ELBOW-FLARED  
  1N-3799 BF [1] TUBE AS (VENT LINE)  
  7K-9197 BF [1] ELBOW  
  001-9440 BF [1] CONNECTOR-FLARED  
  B   USE AS REQUIRED
  F   NOT SHOWN
 

Information:

Engine News
New Engine Cylinder Block Used
1979/03/14
New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders
1980/06/04
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspection Marks On Bearings
1982/05/12
List Of Main And Connecting Rod Bearings Currently Available
1982/06/16
Resurfaced Cylinder Blocks And Heads
1982/11/10
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/15
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/15
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure
1983/04/27
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks
1983/05/25
New Procedure And New Tool Can Be Used To Remove Cylinder Sleeves From The Cylinder Block
1983/08/17
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings
1983/09/14
New Relief Valve Guide Used In Oil Pump
1984/07/11
New Main And Connecting Rod Bearings Have Copper Bond Material
1984/10/03
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/04/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/06/01
Substantial Price Reduction For Caterpillar Remanufactured Short Blocks
1985/08/01
All Three Main Bearing Part Numbers Stamped On Lower Portion Of Standard Size Bearing
1987/07/01
New Connecting Rod and Main Bearing Kits Available
1989/11/01
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/10/12
Procedures And Cautions For Use Of A FLEX-HONE On 3204 And 3208 Engines
1978/06/14
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Installation Of 4W6143 Sleeve{1201}
Installation Of 4W6143 Sleeve{1201}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installing Crankshaft Bearing Caps On 4.5" Bore V8 Direct Injection Engines{1200}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
installation of 9n6275 cylinder sleeve{1222}
installation of 9n6275 cylinder sleeve{1222}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Block Group And Cylinder Block Service Group For 1100, 3100 And 3208 Naturally Aspirated Engines Or 3208 Turbocharged Engines{1200, 1201}
Installation Of Short Block Group And Cylinder Block Service Group For 1100, 3100 And 3208 Naturally Aspirated Engines Or 3208 Turbocharged Engines{1200, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Block
3208 INDUSTRIAL & MARINE ENGINES
Bearings For Connecting Rods And Mains
3208 INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3200 Engine Cylinder Blocks {1201}
Reuse and Salvage for 3200 Engine Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Disassembly and Assembly
Crankshaft Main Bearings
3208 INDUSTRIAL & MARINE ENGINES
Camshaft Bearings
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders{1216,1201}
1980/06/02
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
Engine Ground Straps Necessary To Prevent Electrical Discharge Damage To Crankshaft Bearings{1202,1203,1400,1405}
1982/06/21
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Resurfaced Cylinder BlocksAnd Heads{1201,1101,1000}
1982/10/25
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Check Cylinder Bores For Chamfer During Reconditioning{1202,1222,1223}
1983/02/14
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Procedure And New Tool Can Be Used To Remove Cylinder Sleeves From The Cylinder Block{1222,1223}
1983/08/08
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Improved Cylinder Head Gasket{1101,1201}
1984/05/21
New Relief Valve Guide Used In Oil Pump{1315}
1984/07/16
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure{1100,1200}
1985/04/01
Improved Cylinder Head Gasket{1101,1201}
1986/03/24
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
All Three Main Bearing Part Numbers Stamped On Lower Portion Of Standard Size Bearing {1203}
1987/06/15
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Engine Cylinder Block Used{1201}
1979/03/05
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30
Parts Service Information For Pistons{1214,1225,1331}
1990/05/14
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Compression Ratio Increased On Remanufactured OR1094 &amp; OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30

Caterpillar Parts SIS Catalog 3208 :

PISTON & ROD GP
1N-3563 PISTON & ROD GP
COVER GP-CYLINDER BLOCK
9L-6065 COVER GP-CYLINDER BLOCK
PISTON & ROD GP
1N-3085 PISTON & ROD GP
4W-8269 RING GP-PISTON
PISTON & ROD GP
9N-2613 PISTON & ROD GP
PISTON & ROD GP
9N-2613 PISTON & ROD GP
PISTON GP
2W-4841 PISTON GP
4W-8261 RING GP-PISTON
CYLINDER HEAD GP
6N-1737 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
CYLINDER HEAD GP
9N-1105 CYLINDER HEAD GP
CYLINDER HEAD GP
1W-6221 CYLINDER HEAD GP

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.