AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3208 INDUSTRIAL ENGINE 90N00001-06120 FUEL SYSTEM Caterpillar SIS



INDUSTRIAL ENGINE 3208 INDUSTRIAL ENGINE 90N
 3208 INDUSTRIAL ENGINE 90N00001-06120 UEG0825S 3208 90N   (1975)

Parts group 3208:

  For full view, you need register
FUEL SYSTEM
CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
3N-7815 CONTROL GP-GOVERNOR
3N7815 GOVERNOR CONTROL GROUP--Positive Lock--Type 2
AN ATTACHMENT
CONTROL GP-GOVERNOR
3N-7815 CONTROL GP-GOVERNOR
3N7815 GOVERNOR CONTROL GROUP--Positive Lock--Type 1
AN ATTACHMENT
CONTROL GP-GOVERNOR
9L-6743 CONTROL GP-GOVERNOR
9L6743 GOVERNOR CONTROL GROUP
Serial No. 90N5609-Up
Only separate parts serviced
CONTROL GP-GOVERNOR
9L-6743 CONTROL GP-GOVERNOR
9L6743 GOVERNOR CONTROL GROUP
Serial No. 90N1 to 90N5608 inclusive
Only separate parts serviced
DRIVE GP-TACHOMETER
TACHOMETER MOUNTING & DRIVE GP
2N-5745 TACHOMETER MOUNTING & DRIVE GP
2N5745 TACHOMETER MOUNTING AND DRIVE GROUP
7L4535 Mounting parts are shown on Pages 132B & 133
FILTER GP-FUEL
FUEL FILTER LINES GROUP
4N-5872 FUEL FILTER LINES GROUP
4N5872 FUEL FILTER LINES GROUP
Only separate parts serviced
FUEL FILTER LINES GROUP
6N-1206 FUEL FILTER LINES GROUP
6N1206 FUEL FILTER LINES GROUP
Only separate parts serviced
FILTER GP-FUEL
4N-5868 FILTER GP-FUEL
4N5868 FUEL FILTER GROUP
Only separate parts serviced
FUEL FILTER GROUP
6N-1204 FUEL FILTER GROUP
6N1204 FUEL FILTER GROUP
Only separate parts serviced
FILTER GP-PRIMARY FUEL
8H-4681 FILTER GP-PRIMARY FUEL
8H4681 PRIMARY FUEL FILTER GROUP
Part of 9N5458 Electrical Fuel Pump Group & 8N3569 Fuel Pump Group shown
on Page 106A
GOVERNOR GP
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-1865 GOVERNOR AND FUEL INJECTION PUMP GROUP
6N1865 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N3617-Up. 6N1864 Governor and Fuel Injection Pump and 6N509
Torque Control parts are shown on Pages 94A and 100. Only separate parts
serviced. When complete Group is required order 1--9N495 Pump and
1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-0870 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N870 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N1 to 90N4716 inclusive. Governor and Fuel Injection Pump and
4N3880 Torque parts are shown on Pages 94 and 100. Only separate parts
serviced. When complete Group is required order 1--9N681 Pump and
1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-0870 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N870 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N4717-Up. 9N454 Governor and Fuel Injection Pump and 6N509
Control parts are shown on Pages 94 and 100. Only separate parts serviced.
When complete Group is required order 1--9N681 Pump and 1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9233 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9233 GOVERNOR AND FUEL INJECTION PUMP GROUP
6N1864 Fuel Injection Pump and 6N509 Torque Control parts are shown on
Pages 94A and 100. Only separate parts serviced. When complete Group is
required order 1--9N495 Pump and 1--9N683 Shut-Off
GOV & FUEL INJ PUMP GP
9N-0457 GOV & FUEL INJ PUMP GP
9N457 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N4717-Up. 9N454 Fuel Injection Pump and 6N509 Control parts
are shown on Pages 94 and 100. Only separate parts serviced. When complete
Group is required order 1--9N681 Pump and 1--9N683 Shut-Off
DRIVE GP-GOVERNOR & FUEL PUMP
9N-0731 DRIVE GP-GOVERNOR & FUEL PUMP
9N731 GOVERNOR AND FUEL PUMP DRIVE GROUP
GOV & FUEL INJ PUMP GP
9N-0457 GOV & FUEL INJ PUMP GP
9N457 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N1 to 90N4716 inclusive. 9N454 Governor and Fuel Injection Pump and
4N3880 Control parts are shown on Pages 94 and 100. Only separate parts serviced
When complete Group is required order 1--9N681 Pump and 1--9N683 Shut-Off
shown on Pages 95, 100D and 101
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9231 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9231 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N454 Fuel Injection Pump and 4N3880 Torque Control parts are shown on
Pages 94 and 100. Only separate parts serviced. When complete Group is
required order 1--9N681 Pump and 1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9184 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9184 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N1 to 90N4716 inclusive. Governor and Fuel Injection Pump and
4N3880 Torque Control parts are shown on Pages 94 and 100. Only separate
parts serviced. When complete Group is required order 1--9N681 Pump and
1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9184 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9184 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N4717-Up. 9N454 Governor and Fuel Injection Pump and 6N509
Control parts are shown on Pages 94 and 100. Only separate parts serviced
When complete Group is required order 1--9N681 Pump and 1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9223 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9223 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N4717-Up. 9N454 Fuel Injection Pump and 6N509 Control parts
are shown on Pages 94 and 100. Only separate parts serviced. When complete
Group is required order 1--9N681 Pump and 1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9223 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9223 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N1 to 90N4716 inclusive. Fuel Injection Pump and 4N3880 Control
parts are shown on Pages 94 and 100. Only separate parts serviced. When
complete Group is required order 1--9N681 Pump and 1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP
4N-9227 GOVERNOR AND FUEL INJECTION PUMP
4N9227 GOVERNOR AND FUEL INJECTION PUMP
9N454 Fuel Injection Pump and 4N3880 Control parts are shown on Pages
94 and 100. Only separate parts serviced. When complete Group is required
order 1--9N681 Pump and 1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9229 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9229 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N1 to 90N3385 inclusive. Fuel Injection Pump and 4N3880 Control
parts are shown on Pages 94 and 100. Only separate parts serviced. When
complete Group is required order 1--9N681 and 1--9N683 Shut-Off
GOV & FUEL INJ PUMP GP
9N-0454 GOV & FUEL INJ PUMP GP
9N454 GOVERNOR AND FUEL INJECTION PUMP GROUP
6N1085 Pump and 9N683 Shut-Off parts are shown on Pages 96, 97, 98, 99 and
101. Part of 9N870, 9N457, 4N9231, 4N9184, 4N9223, 4N9227 and 4N9229
Governor and Fuel Injection Pump Groups shown on Pages 90B, 90D, 91, 92,
92A, 92B, 93, 94 and 94A. Only separate parts serviced
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9229 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9229 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N3386-Up. 9N454 Pump and 6N509 Control parts are shown on Pages
94 and 100. Only separate parts serviced. When complete Group is required order
1--9N681 and 1--9N683 Shut-Off shown on Pages 95, 100D and 101
GOV & FUEL INJ PUMP GP
6N-1864 GOV & FUEL INJ PUMP GP
6N1864 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 6N1865 and 4N9233 Governor and Fuel Injection Pump Groups shown
on Pages 90A and 90C. 6N1863 Pump and 9N683 Shut-Off parts are shown
on Pages 94D, 94F, 94G, 100D and 101
9N-0495 PUMP GP-GOV DRV,FUEL INJ & TFR
9N495 GOVERNOR AND FUEL INJECTION PUMP GROUP
Provides Field Replacement for 4N9233 and 6N1865 when used
in conjunction with 9N683 Shut-Off Group
GOV & FUEL INJ PUMP GP
6N-2337 GOV & FUEL INJ PUMP GP
6N2337 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 9N495 Governor and Fuel Injection Pump Group shown on Page 94B
6N1863 Pump and 6N509 Control parts are shown on Pages 94D, 94E, 94F, 94G and 100
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Part of 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 94A and 94C
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Part of 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 94A and 94C
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4
Part of 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 94A and 94C
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4
Part of 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 94A and 94C
GOV & FUEL INJ PUMP GP
9N-0681 GOV & FUEL INJ PUMP GP
9N681 GOVERNOR AND FUEL INJECTION PUMP GROUP
Pump and Control parts are shown on Pages 96, 97, 98, 99 and 100. Provides Field Replacement for
9N457, 4N9231, 4N9184, 4N9223, 4N9227 and 4N9229 when used in conjunction with 9N683 Shut-Off Group
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
6N1085 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Part of 9N454 and 9N681 Governor and Fuel Injection Pump Groups shown on Pages 94 and 95
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
6N1085 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Part of 9N454 and 9N681 Governor and Fuel Injection Pump Groups shown on Pages 94 and 95
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP (6N1085 N/S)--Part 3 of 4
Part of 9N454 and 9N681 Governor and Fuel Injection Pump Groups shown on Pages 94 and 95
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP (6N1085 N/S)--Part 4 of 4
Part of 9N454 and 9N681 Governor and Fuel Injection Pump Groups shown on Pages 94 and 95
CONVERSION GP-GOVERNOR
4N-7959 CONVERSION GP-GOVERNOR
4N7959 DASHPOT GOVERNOR CONVERSION GROUP--Field Installation--Type 1
Note: Allows Field Changeover from Standard to Dashpot Type Governor
CONVERSION GP-GOVERNOR
4N-7959 CONVERSION GP-GOVERNOR
4N7959 DASHPOT GOVERNOR CONVERSION GROUP--Field Installation--Type 2
Note: Allows Field Changeover from Standard to Dashpot Type Governor
CONVERSION GP-GOVERNOR
4N-7959 CONVERSION GP-GOVERNOR
4N7959 DASHPOT GOVERNOR CONVERSION GROUP--Field Installation--Type 3
Note: Allows Field Changeover from Standard to Dashpot Type Governor
INJECTION GP-CETANE
INJECTION GP-CETANE
9N-3771 INJECTION GP-CETANE
9N3771 CETANE INJECTION GROUP--Field Installation
Note: Reduces while smoke when starting engine in cold temperatures
LINES GP-FUEL
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
4N5873 FUEL INJECTION LINES GROUP--Part 1 of 2
Serial No. 90N1 to 90N4498 inclusive
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
4N5873 FUEL INJECTION LINES GROUP--Part 2 of 2
Serial No. 90N1 to 90N4498 inclusive
Only separate parts serviced
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
4N5873 FUEL INJECTION LINES GROUP--Part 1 of 2
Serial No. 90N4499-Up
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
4N5873 FUEL INJECTION LINES GROUP--Part 2 of 2
Serial No. 90N4499-Up
Only separate parts serviced
FUEL FILTER LINES GROUP
4N-5872 FUEL FILTER LINES GROUP
4N5872 FUEL FILTER LINES GROUP
Only separate parts serviced
FUEL FILTER LINES GROUP
6N-1206 FUEL FILTER LINES GROUP
6N1206 FUEL FILTER LINES GROUP
Only separate parts serviced
PUMP GP-FUEL INJECTION
GOVERNOR AND FUEL INJECTION PUMP GROUP
6N-1865 GOVERNOR AND FUEL INJECTION PUMP GROUP
6N1865 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N3617-Up. 6N1864 Governor and Fuel Injection Pump and 6N509
Torque Control parts are shown on Pages 94A and 100. Only separate parts
serviced. When complete Group is required order 1--9N495 Pump and
1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-0870 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N870 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N1 to 90N4716 inclusive. Governor and Fuel Injection Pump and
4N3880 Torque parts are shown on Pages 94 and 100. Only separate parts
serviced. When complete Group is required order 1--9N681 Pump and
1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
9N-0870 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N870 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N4717-Up. 9N454 Governor and Fuel Injection Pump and 6N509
Control parts are shown on Pages 94 and 100. Only separate parts serviced.
When complete Group is required order 1--9N681 Pump and 1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9233 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9233 GOVERNOR AND FUEL INJECTION PUMP GROUP
6N1864 Fuel Injection Pump and 6N509 Torque Control parts are shown on
Pages 94A and 100. Only separate parts serviced. When complete Group is
required order 1--9N495 Pump and 1--9N683 Shut-Off
GOV & FUEL INJ PUMP GP
9N-0457 GOV & FUEL INJ PUMP GP
9N457 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N4717-Up. 9N454 Fuel Injection Pump and 6N509 Control parts
are shown on Pages 94 and 100. Only separate parts serviced. When complete
Group is required order 1--9N681 Pump and 1--9N683 Shut-Off
DRIVE GP-GOVERNOR & FUEL PUMP
9N-0731 DRIVE GP-GOVERNOR & FUEL PUMP
9N731 GOVERNOR AND FUEL PUMP DRIVE GROUP
GOV & FUEL INJ PUMP GP
9N-0457 GOV & FUEL INJ PUMP GP
9N457 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N1 to 90N4716 inclusive. 9N454 Governor and Fuel Injection Pump and
4N3880 Control parts are shown on Pages 94 and 100. Only separate parts serviced
When complete Group is required order 1--9N681 Pump and 1--9N683 Shut-Off
shown on Pages 95, 100D and 101
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9231 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9231 GOVERNOR AND FUEL INJECTION PUMP GROUP
9N454 Fuel Injection Pump and 4N3880 Torque Control parts are shown on
Pages 94 and 100. Only separate parts serviced. When complete Group is
required order 1--9N681 Pump and 1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9184 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9184 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N1 to 90N4716 inclusive. Governor and Fuel Injection Pump and
4N3880 Torque Control parts are shown on Pages 94 and 100. Only separate
parts serviced. When complete Group is required order 1--9N681 Pump and
1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9184 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9184 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N4717-Up. 9N454 Governor and Fuel Injection Pump and 6N509
Control parts are shown on Pages 94 and 100. Only separate parts serviced
When complete Group is required order 1--9N681 Pump and 1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9223 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9223 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N4717-Up. 9N454 Fuel Injection Pump and 6N509 Control parts
are shown on Pages 94 and 100. Only separate parts serviced. When complete
Group is required order 1--9N681 Pump and 1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9223 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9223 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N1 to 90N4716 inclusive. Fuel Injection Pump and 4N3880 Control
parts are shown on Pages 94 and 100. Only separate parts serviced. When
complete Group is required order 1--9N681 Pump and 1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP
4N-9227 GOVERNOR AND FUEL INJECTION PUMP
4N9227 GOVERNOR AND FUEL INJECTION PUMP
9N454 Fuel Injection Pump and 4N3880 Control parts are shown on Pages
94 and 100. Only separate parts serviced. When complete Group is required
order 1--9N681 Pump and 1--9N683 Shut-Off
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9229 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9229 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N1 to 90N3385 inclusive. Fuel Injection Pump and 4N3880 Control
parts are shown on Pages 94 and 100. Only separate parts serviced. When
complete Group is required order 1--9N681 and 1--9N683 Shut-Off
GOV & FUEL INJ PUMP GP
9N-0454 GOV & FUEL INJ PUMP GP
9N454 GOVERNOR AND FUEL INJECTION PUMP GROUP
6N1085 Pump and 9N683 Shut-Off parts are shown on Pages 96, 97, 98, 99 and
101. Part of 9N870, 9N457, 4N9231, 4N9184, 4N9223, 4N9227 and 4N9229
Governor and Fuel Injection Pump Groups shown on Pages 90B, 90D, 91, 92,
92A, 92B, 93, 94 and 94A. Only separate parts serviced
GOVERNOR AND FUEL INJECTION PUMP GROUP
4N-9229 GOVERNOR AND FUEL INJECTION PUMP GROUP
4N9229 GOVERNOR AND FUEL INJECTION PUMP GROUP
Serial No. 90N3386-Up. 9N454 Pump and 6N509 Control parts are shown on Pages
94 and 100. Only separate parts serviced. When complete Group is required order
1--9N681 and 1--9N683 Shut-Off shown on Pages 95, 100D and 101
GOV & FUEL INJ PUMP GP
6N-1864 GOV & FUEL INJ PUMP GP
6N1864 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 6N1865 and 4N9233 Governor and Fuel Injection Pump Groups shown
on Pages 90A and 90C. 6N1863 Pump and 9N683 Shut-Off parts are shown
on Pages 94D, 94F, 94G, 100D and 101
9N-0495 PUMP GP-GOV DRV,FUEL INJ & TFR
9N495 GOVERNOR AND FUEL INJECTION PUMP GROUP
Provides Field Replacement for 4N9233 and 6N1865 when used
in conjunction with 9N683 Shut-Off Group
GOV & FUEL INJ PUMP GP
6N-2337 GOV & FUEL INJ PUMP GP
6N2337 GOVERNOR AND FUEL INJECTION PUMP GROUP
Part of 9N495 Governor and Fuel Injection Pump Group shown on Page 94B
6N1863 Pump and 6N509 Control parts are shown on Pages 94D, 94E, 94F, 94G and 100
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Part of 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 94A and 94C
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Part of 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 94A and 94C
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 3 of 4
Part of 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 94A and 94C
GOV & FUEL INJ PUMP GP
6N-1863 GOV & FUEL INJ PUMP GP
6N1863 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 4 of 4
Part of 6N1864 and 6N2337 Governor and Fuel Injection Pump Groups shown on Pages 94A and 94C
GOV & FUEL INJ PUMP GP
9N-0681 GOV & FUEL INJ PUMP GP
9N681 GOVERNOR AND FUEL INJECTION PUMP GROUP
Pump and Control parts are shown on Pages 96, 97, 98, 99 and 100. Provides Field Replacement for
9N457, 4N9231, 4N9184, 4N9223, 4N9227 and 4N9229 when used in conjunction with 9N683 Shut-Off Group
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
6N1085 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 1 of 4
Part of 9N454 and 9N681 Governor and Fuel Injection Pump Groups shown on Pages 94 and 95
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
6N1085 GOVERNOR AND FUEL INJECTION PUMP GROUP--Part 2 of 4
Part of 9N454 and 9N681 Governor and Fuel Injection Pump Groups shown on Pages 94 and 95
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP (6N1085 N/S)--Part 3 of 4
Part of 9N454 and 9N681 Governor and Fuel Injection Pump Groups shown on Pages 94 and 95
GOV & FUEL INJ PUMP GP
6N-1085 GOV & FUEL INJ PUMP GP
GOVERNOR AND FUEL INJECTION PUMP GROUP (6N1085 N/S)--Part 4 of 4
Part of 9N454 and 9N681 Governor and Fuel Injection Pump Groups shown on Pages 94 and 95
INJECTION GP-CETANE
9N-3771 INJECTION GP-CETANE
9N3771 CETANE INJECTION GROUP--Field Installation
Note: Reduces while smoke when starting engine in cold temperatures
FASTENER GP-FUEL PUMP HOUSING
9L-6925 FASTENER GP-FUEL PUMP HOUSING
9L6925 FUEL SYSTEM FASTENER GROUP
PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4N-3287 PUMP GP-FUEL PRIMING
4N3287 FUEL PRIMING PUMP GROUP
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL
9N-5458 PUMP GP-FUEL
9N5458 ELECTRICAL FUEL PUMP GROUP--Boost--12 Volt--Field Installation
8H4681 Filter parts are shown on Page 106B
8N-3569 PUMP GP-FUEL
8N3569 FUEL PUMP GROUP--Boost--24 Volt--Field Installation
Provides positive pressure to the sleeve metering fuel system
components on the suction side of the fuel transfer pump
SEPARATOR GP-WATER
SEPARATOR GP-WATER
7N-0950 SEPARATOR GP-WATER
7N950 WATER SEPARATOR GROUP
AN ATTACHMENT
TORQUE CONTROL GP
TORQUE CONTROL GP
4N-3880 TORQUE CONTROL GP
4N3880 TORQUE CONTROL GROUP
Part of 9N870, 9N457, 4N9231, 4N9184, 4N9223, 4N9227 and 4N9229 Governor
and Fuel Injection Pump Groups shown on Pages 90B, 91, 92, 93 and 94
Only separate parts serviced
TORQUE CONTROL GP
6N-0509 TORQUE CONTROL GP
6N509 TORQUE CONTROL GROUP
Part of 6N1865, 9N870, 4N9233, 9N457, 4N9184, 4N9223, 4N9229, 6N2337 and
9N681 Governor and Fuel Injection Pump Groups shown on Pages 90A, 90B,
90C, 90D, 92A, 92B, 94A, 94C and 95. Only separate parts serviced
TORQUE CONTROL GROUP
4N-9993 TORQUE CONTROL GROUP
4N9993 TORQUE CONTROL GROUP

Information:

(For parts list, see above)

Special Instruction
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Service Magazine
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
New Camshaft Rear Bearing For The Sleeve Metering Fuel System{1253}
1978/09/04
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Engine News
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems
1977/10/12
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Specifications
Governor
3208 INDUSTRIAL & MARINE ENGINES
Fuel Temperature Compensating Torque Control Group
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
New Spring Used In Governor Control Groups{1265}
1992/04/20
Engine News
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting {1278,1287}
1996/01/17
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems
1977/10/12
Cat<SUP>&reg;</SUP> Reman Announces Additions to the Fuel Air Ratio Controls Portfolio for Certain Engine Applications {1278}
2015/06/26
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Engine News
New Seal Used On Governor Control Shaft
1982/12/15
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
New Spring Used In Governor Control Groups
1992/04/01
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Service Magazine
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
New Shutoff Solenoid Group Used{1259}
1983/03/21
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
New Spring Used In Governor Control Groups{1265}
1992/04/20
Engine News
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Disassembly and Assembly
Fuel Return Manifolds
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Engine News
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter
1979/04/25
Tachometer Drive Is Now An Attachment
1985/08/01
Service Magazine
Tachometer Drive Is Now An Attachment{1166,1250,7450,7452,7487}
1985/08/12
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter{7462}
1979/04/02
Engine News
Improvements Made To Water Separator Groups
1980/04/30
Use Only Caterpillar Water Separator Elements
1980/10/01
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Improved Water Separator Group Used
1982/06/16
Wrong Water Separator Element Will Not Remove Water
1982/08/25
Water Separator Available
1987/03/01
Improved Fuel Priming Pump Used
1987/05/01
Check Valve Added To Keep Air From Entering Fuel System
1988/10/01
New Oil Cooler And Filter Base Assembly And New Oil Cooler And Filter Base Group Have Stronger Mounting Flanges{1378,1306}
1994/05/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Water Separators Needed On Engines In The Field With SMFS
1977/12/14
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage
1978/04/19
Improved Seal on Fuel Filter {1261}
2007/07/30
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1250, 1261}
2012/08/21
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
A New Specification Has Been Issued for the Primary Fuel Filter Filtration {1260}
Special Instruction
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Installation of Fuel/Water Separator{1260, 1263}
Installation of Fuel/Water Separator{1260, 1263}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Specifications
Fuel Filter Base
3208 INDUSTRIAL & MARINE ENGINES
Water Separator
3208 INDUSTRIAL AND MARINE ENGINE ATTACHMENTS
Tool Operating Manual
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Disassembly and Assembly
Fuel Filter Base
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Improvements Made To Water Separator Groups{1263}
1980/05/05
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
Wrong Water Separator Element Will Not Remove Water{1263}
1982/05/17
Improved Water Separator Group Used {1263}
1982/05/31
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Lubricant Will Ease Installation Of Secondary Radial Seal Air Filter Element {1054}
1994/04/25
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
The Proper Procedure to Enter Claims in SIMSi for Plugged /Restricted Fuel Filters and Water Separators on All Machines {1260, 1261, 1262, 1263}
2011/03/21
New Primary Fuel Filters are Available {1260, 1261}
2008/07/14
Special Instruction
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Service Magazine
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Special Instruction
Installation Of 8N9754 Fuel Heater Group{1296}
Installation Of 8N9754 Fuel Heater Group{1296}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Tool Operating Manual
NEHS1126: <NOBR>370-8570</NOBR> Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
NEHS1126: 370-8570 Bulk Fuel Filtration Group 200 GPM Flow Rate {0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8568 Bulk Fuel Filtration Group 50 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0413 Bulk Fuel Filtration Group 50 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0415 Bulk Fuel Filtration Group 100 GPM Flow Rate{0680, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
284-0416 Bulk Fuel Filtration Group 200 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
295-0048 Bulk Fuel Filtration Group 300 GPM Flow Rate{0374, 0599, 0680, 0706, 1250, 1261, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8569 Bulk Fuel Filtration Group 100 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
370-8571 Bulk Fuel Filtration Group 300 GPM Flow Rate{0599, 0680, 0706, 0782, 1250, 1280}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
20 GPM Portable Fuel Filtration System {0374, 0599, 0706, 1250, 1256, 1261}
Reuse And Salvage Guidelines
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Reuse and Salvage of New Scroll Fuel Systems (NSFS) for 3200, 3300, & 3400 Engines {1250, 1256}
Service Magazine
Modification Of Puller Bolt Prevents Thread Damage During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1980/11/03
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Improvements Made To Fuel Injection Pump And Governor Group
1979/03/14
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies
1980/06/04
New Check Valve Used In Fuel Injection Pump Assembly
1980/06/04
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other
1980/10/01
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/17
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups
1985/04/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Changes To The Injection Pump And The Fuel Setting
1977/09/28
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Pump
3208 INDUSTRIAL & MARINE ENGINES
Governor
3208 INDUSTRIAL & MARINE ENGINES
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Fuel Injection Pump Housing &amp; Governor
3208 INDUSTRIAL & MARINE ENGINES
Check Valve &amp; Bypass Valve
3208 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3208 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3208 INDUSTRIAL & MARINE ENGINES
Governor
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies{1251,1272,1254}
1980/06/02
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
1980/09/15
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Changes To The Injection Pump And The Fuel Setting{1251,1257}
1977/09/19
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281,1286}
1979/03/05
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Special Instruction
Installation Of 8N9754 Fuel Heater Group{1296}
Installation Of 8N9754 Fuel Heater Group{1296}
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Repair Kit For Diesel Fuel Heater Available {1296}
1983/04/18
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
Cetane Injection Group Uses New Orifice, Tee and Seals
1984/10/24
Special Instruction
INSTALLATION, OPERATION AND MAINTENANCE OF 9N3771 INJECTION GROUP (CETANE){1250}
INSTALLATION, OPERATION AND MAINTENANCE OF 9N3771 INJECTION GROUP (CETANE){1250}
Service Magazine
Cetane Injection Group Uses New Orifice, Tee and Seals{1250,1274}
1984/10/29
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Engine News
New Fuel Injection Nozzles Are Used In 3208 Engines
1979/03/14
Do Not Use Later 9N3979 Nozzle Assemblies In Place Of Earlier Nozzle Assemblies
1979/05/23
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines
1979/06/06
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies
1979/06/20
Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures
1980/04/30
Improvements Made To Water Separator Groups
1980/04/30
Use Only Caterpillar Water Separator Elements
1980/10/01
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations
1981/04/01
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Improved Water Separator Group Used
1982/06/16
Wrong Water Separator Element Will Not Remove Water
1982/08/25
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/22
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
Tune-Up Kit And Remanufactured Nozzles Available
1984/09/12
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles
1984/10/24
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Water Separator Available
1987/03/01
Check Valve Added To Keep Air From Entering Fuel System
1988/10/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
An Improved O-Ring Seal And Proper Use Of Adapter Locks Reduces Oil Leaks{1252}
1996/10/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line
1977/09/28
Water Separators Needed On Engines In The Field With SMFS
1977/12/14
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage
1978/04/19
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Service Letter-NACD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CFEL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CSARL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Americas
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Specifications
Fuel Injection Nozzles
3208 INDUSTRIAL & MARINE ENGINES
Fuel Filter Base
3208 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Service Letter-China
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-APD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Disassembly and Assembly
Fuel Injection Lines
3208 INDUSTRIAL & MARINE ENGINES
Fuel Return Manifolds
3208 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Improvements Made To Water Separator Groups{1263}
1980/05/05
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
1980/09/15
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Larger Valve Springs{1108,1101,1252}
1981/05/04
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Wrong Water Separator Element Will Not Remove Water{1263}
1982/05/17
Improved Water Separator Group Used {1263}
1982/05/31
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/09
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles{1254}
1984/10/22
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Do Not Use Later 9N3979 Nozzle Assemblies In Plate Of Earlier Nozzle Assemblies{1254}
1979/05/21
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines{7555,1254}
1979/05/21
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Compression Ratio Increased On Remanufactured OR1094 &amp; OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Engine News
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations
1981/04/01
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Check Valve Added To Keep Air From Entering Fuel System
1988/10/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
An Improved O-Ring Seal And Proper Use Of Adapter Locks Reduces Oil Leaks{1252}
1996/10/01
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Service Letter-NACD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injection Nozzles
3208 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
398-9680 Calibration Test Group{0599, 0706, 1250, 1251, 1252, 1280}
Service Letter-China
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter-Asia
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Disassembly and Assembly
Fuel Injection Lines
3208 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
1980/09/15
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Larger Valve Springs{1108,1101,1252}
1981/05/04
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/09
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles{1254}
1984/10/22
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Do Not Use Later 9N3979 Nozzle Assemblies In Plate Of Earlier Nozzle Assemblies{1254}
1979/05/21
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines{7555,1254}
1979/05/21
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Compression Ratio Increased On Remanufactured OR1094 &amp; OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Calibration Fluid for Fuel Nozzle Test Equipment Is Available {1252, 1254}
2008/12/01
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Engine News
New Electric Service Meter Used
1978/12/13
Service Magazine
Self-Powered Hour Meters Available{7480,7450}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
New Electric Service Meter Used{7480}
1978/12/11
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
New Fuel Injection Nozzles Are Used In 3208 Engines
1979/03/14
Improvements Made To Fuel Injection Pump And Governor Group
1979/03/14
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter
1979/04/25
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
Do Not Use Later 9N3979 Nozzle Assemblies In Place Of Earlier Nozzle Assemblies
1979/05/23
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines
1979/06/06
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies
1979/06/20
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
Fuel Heaters Are Now Available For Field Installation
1980/01/09
Improvements Made To Water Separator Groups
1980/04/30
Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies
1980/06/04
New Check Valve Used In Fuel Injection Pump Assembly
1980/06/04
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other
1980/10/01
Use Only Caterpillar Water Separator Elements
1980/10/01
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Rack Shut-Off Solenoid Can Be Removed And Engine Started When There Is An Emergency
1980/11/12
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Explanation Of Differences In Timing Advance Information
1981/08/26
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System
1981/08/26
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance
1982/02/10
New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/17
Causes Of White Exhaust Smoke During Cold Weather Starts And Ways To Reduce It
1984/03/07
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Changes Have Been Made To 0T Microfiche (Fuel Setting And Related Information)
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems
1977/02/28
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Changes To The Injection Pump And The Fuel Setting
1977/09/28
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line
1977/09/28
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems
1977/10/12
Water Separators Needed On Engines In The Field With SMFS
1977/12/14
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage
1978/04/19
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
New Camshaft Rear Bearing For The Sleeve Metering Fuel System
1978/08/30
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
New Electric Service Meter Used
1978/12/13
Special Instruction
INSTALLATION, OPERATION AND MAINTENANCE OF 9N3771 INJECTION GROUP (CETANE){1250}
INSTALLATION, OPERATION AND MAINTENANCE OF 9N3771 INJECTION GROUP (CETANE){1250}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Use And Maintenance Of 8T0910 Fuel Sulfur Analyzer Group{0786, 1280}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Use Of 3P2200 Calibration Tool Group{0650, 1250}
Use Of 3P2200 Calibration Tool Group{0650, 1250}
Installation Of 8N3840 Fuel Temperature Compensator Conversion Group{1250}
Installation Of 8N3840 Fuel Temperature Compensator Conversion Group{1250}
Installation Of 8N3569 (24V) Or 9N5458 (12V) Fuel Boost Pump Group{1250}
Installation Of 8N3569 (24V) Or 9N5458 (12V) Fuel Boost Pump Group{1250}
Service Letter-NACD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CFEL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CSARL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Americas
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-China
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-APD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Magazine
Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07
Improvements Made To Water Separator Groups{1263}
1980/05/05
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies{1251,1272,1254}
1980/06/02
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Troubleshooting Water In Shut-Off Solenoid Housing{1259}
1981/06/08
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Be Sure To Use Correct Water Temperature Regulators{1355}
1982/05/10
Wrong Water Separator Element Will Not Remove Water{1263}
1982/05/17
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/09
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Shutoff Solenoid Group Used{1259}
1983/03/21
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
Causes Of White Exhaust Smoke During Cold Weather Starts And Ways To Reduce It{1250}
1984/03/05
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles{1254}
1984/10/22
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Tachometer Drive Is Now An Attachment{1166,1250,7450,7452,7487}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Engine Information Plate Contains More Data; Use Of Performance Specifications{1250,7557}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Three Element Speed Switch Replaces Dual Element Speed Switch{7418,7411,7410,7421}
1986/04/21
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Engine Power Increased{1250}
1986/12/22
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Diesel Fuel Recommendation Expanded{1280}
1977/02/14
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems{1259}
1977/03/07
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Changes To The Injection Pump And The Fuel Setting{1251,1257}
1977/09/19
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Improved Fuel Priming Pump Used{1258}
1987/04/20
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Change Factory Fuel Or Speed Settings On Truck Engines Unless New Settings Are Certified Under Applicable EPA Regulations{0336,0337,1257}
1978/01/30
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
The Causes And Reduction Of White Exhaust Smoke During Cold Engine Starts; Maintenance Aids Available To Decrease This Problem{1250,1383,1050}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Camshaft Rear Bearing For The Sleeve Metering Fuel System{1253}
1978/09/04
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
New Coolant Temperature Regulator Has Flat Washer-Type By-Pass Valve{1355}
1978/11/27
New Electric Service Meter Used{7480}
1978/12/11
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage{1280}
1979/02/05
New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281,1286}
1979/03/05
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter{7462}
1979/04/02
Two Fuel Pressure Pumps Are Available To Increase Fuel Pressure{1250,1295}
1979/05/14
Do Not Use Later 9N3979 Nozzle Assemblies In Plate Of Earlier Nozzle Assemblies{1254}
1979/05/21
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines{7555,1254}
1979/05/21
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
Temperature Compensator Conversion Group Available For Fuel System To Prevent Low Power Output{1250}
1979/06/18
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
New Thermostat Used In Jacket Water Heater Group{1355,1383}
1993/08/23
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Lubricity Limit Added To Preferred Distillate Fuel Recommendation {1280,7568}
1997/08/18
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Tool Operating Manual
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles{1254}
1984/10/22
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05
Do Not Use Later 9N3979 Nozzle Assemblies In Plate Of Earlier Nozzle Assemblies{1254}
1979/05/21
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines{7555,1254}
1979/05/21
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Compression Ratio Increased On Remanufactured OR1094 &amp; OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Test Sequence for Pencil Type Fuel Nozzles{1254}
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Magazine
Compression Ratio Increased On Remanufactured OR1094 &amp; OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
New Fuel Injection Nozzles Are Used In 3208 Engines
1979/03/14
Improvements Made To Fuel Injection Pump And Governor Group
1979/03/14
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
Do Not Use Later 9N3979 Nozzle Assemblies In Place Of Earlier Nozzle Assemblies
1979/05/23
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines
1979/06/06
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies
1979/06/20
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies
1980/06/04
New Check Valve Used In Fuel Injection Pump Assembly
1980/06/04
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other
1980/10/01
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations
1981/04/01
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Explanation Of Differences In Timing Advance Information
1981/08/26
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System
1981/08/26
New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/17
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/22
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/11/30
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
Tune-Up Kit And Remanufactured Nozzles Available
1984/09/12
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles
1984/10/24
Cetane Injection Group Uses New Orifice, Tee and Seals
1984/10/24
Identification Of Camshaft Groups And Valve Mechanism Groups
1984/12/12
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups
1985/04/01
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Fuel Injection Timing Adjustment
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Changes To The Injection Pump And The Fuel Setting
1977/09/28
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
New Camshaft Rear Bearing For The Sleeve Metering Fuel System
1978/08/30
Improved Guide Pin For Fuel Injection Pump Lifters
1978/08/30
New Torque Procedure for the Bushings that Retain the Fuel Injection Pumps (Specifications Manuals) {1251}
2001/10/01
New Torque Procedure for the Bushings that Retain the Fuel Injection Pumps (Testing and Adjusting Manuals) {1251}
2001/10/01
New Torque Procedure for the Bushings that Retain the Fuel Injection Pumps (Disassembly and Assembly Manuals) {1251}
2001/10/01
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Commercial Engines {1251, 1290}
2012/07/06
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Commercial Engines {1250, 1251, 1290, 1713}
2013/10/17
Special Instruction
INSTALLATION, OPERATION AND MAINTENANCE OF 9N3771 INJECTION GROUP (CETANE){1250}
INSTALLATION, OPERATION AND MAINTENANCE OF 9N3771 INJECTION GROUP (CETANE){1250}
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of Short Block Group For 3208 Or Cylinder Block Service Group For 1100, 3100 And 3208 Engines{1201, 1203, 1286}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles{1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CFEL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CSARL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Americas
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Technical Information Bulletin
Fuel Leaks on the Fuel Injection Pumps on 3208 Applications
Fuel Leaks on the Fuel Injection Pumps on 3208 Applications
Specifications
Fuel Injection Pump
3208 INDUSTRIAL & MARINE ENGINES
Governor
3208 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3208 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance Unit
3208 INDUSTRIAL & MARINE ENGINES
Drive Gear For The Injection Pump
3208 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Service Letter-China
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Disassembly and Assembly
Fuel Injection Pump Housing &amp; Governor
3208 INDUSTRIAL & MARINE ENGINES
Check Valve &amp; Bypass Valve
3208 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pumps
3208 INDUSTRIAL & MARINE ENGINES
Fuel Transfer Pump
3208 INDUSTRIAL & MARINE ENGINES
Fuel Injection Pump Housing
3208 INDUSTRIAL & MARINE ENGINES
Governor
3208 INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assemblies &amp; Push Rods
3208 INDUSTRIAL & MARINE ENGINES
Rocker Shaft Assemblies
3208 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3208 INDUSTRIAL & MARINE ENGINES
Automatic Timing Advance
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies{1251,1272,1254}
1980/06/02
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
1980/09/15
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
High Concentration Of Aluminum In Oil Analysis Can Be The Result Of Rocker Arm Support Wear{1318,1102}
1981/03/02
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Use Correct Torque To Prevent Broken Rocker Arm Shafts{1102}
1982/07/05
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/09
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
New Thrust Washer Can Prevent Wrong Oil Sample Readings{1102}
1982/08/23
New Rocker Arm Assemblies Used {1102}
1982/09/13
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles{1254}
1984/10/22
Cetane Injection Group Uses New Orifice, Tee and Seals{1250,1274}
1984/10/29
Identification Of Camshaft Groups And Valve Mechanism Groups{1210,1102}
1984/11/26
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Changes To The Injection Pump And The Fuel Setting{1251,1257}
1977/09/19
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Camshaft Rear Bearing For The Sleeve Metering Fuel System{1253}
1978/09/04
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281,1286}
1979/03/05
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
Do Not Use Later 9N3979 Nozzle Assemblies In Plate Of Earlier Nozzle Assemblies{1254}
1979/05/21
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines{7555,1254}
1979/05/21
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Compression Ratio Increased On Remanufactured OR1094 &amp; OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
New Spring Used In Governor Control Groups{1265}
1992/04/20
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Truck Engine News
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/11/26
Engine News
Improved Fuel Priming Pump Used
1987/05/01
New Fuel Priming Pump Assembly Used In Fuel Priming Pump Group {1258}
1994/09/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/08
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Tool Operating Manual
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Service Magazine
Improvements Made To Water Separator Groups{1263}
1980/05/05
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Improved Fuel Priming Pump Used{1258}
1987/04/20
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES&reg; Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12
Special Instruction, REHS1037 , "Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System" has been Revised {1258}
2004/03/29
An Improved Hand Operated Fuel Priming Pump Is Available {1258}
2012/10/04
Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
Improvements Made To Fuel Injection Pump And Governor Group
1979/03/14
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.
1979/05/09
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group
1979/08/22
Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies
1980/06/04
New Check Valve Used In Fuel Injection Pump Assembly
1980/06/04
Service Magazine
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies{1251,1272,1254}
1980/06/02
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
1980/09/15
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
New Gasket Used In Governor And Fuel Injection Pump Group{1259,1286}
1982/03/01
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block{1201}
1983/11/21
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Changes To The Injection Pump And The Fuel Setting{1251,1257}
1977/09/19
Improved Fuel Priming Pump Used{1258}
1987/04/20
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Stronger Fuel Inlet Flanges Prevent Parts Damage And Keeps Air Out Of The Fuel System{1253}
1978/05/15
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
New Camshaft Rear Bearing For The Sleeve Metering Fuel System{1253}
1978/09/04
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281,1286}
1979/03/05
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
Two Fuel Pressure Pumps Are Available To Increase Fuel Pressure{1250,1295}
1979/05/14
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Governor Housing Assembly Used In Governor And Fuel Injection Pump Group{1253,1264}
1979/08/27

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.