AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3208 INDUSTRIAL ENGINE 90N00001-06120 LUBRICATION SYSTEM Caterpillar SIS



INDUSTRIAL ENGINE 3208 INDUSTRIAL ENGINE 90N
 3208 INDUSTRIAL ENGINE 90N00001-06120 UEG0825S 3208 90N   (1975)

Parts group 3208:

  For full view, you need register
LUBRICATION SYSTEM
BREATHER GP
LINES GP-PCV
9N-0735 LINES GP-PCV
9N735 POSITIVE CRANKCASE VENTILATION VALVE GROUP
Only separate parts serviced
VALVE AS-PCV
9L-8790 VALVE AS-PCV
9L8790 CRANKCASE VENTILATION VALVE ASSEMBLY
Part of 9N735 Positive Crankcase Ventilation Valve Group
FILTER GP-ENGINE OIL
FILTER AS-OIL
9L-9200 FILTER AS-OIL
9L9200 OIL FILTER ASSEMBLY
GAUGE GP-OIL LEVEL (DIPSTICK)
7N-1754 CHANGEOVER GP
7N1754 OIL LEVEL GAUGE CHANGEOVER GROUP
Serial No. 90N1583-Up
OIL LEVEL GAUGE GROUP
4N-5869 OIL LEVEL GAUGE GROUP
4N5869 OIL LEVEL GAUGE GROUP
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-8855 GAUGE GP-OIL LEVEL (DIPSTICK)
4N8855 OIL LEVEL GAUGE GROUP
Only separate parts serviced
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-8930 GAUGE GP-OIL LEVEL (DIPSTICK)
4N8930 OIL LEVEL GAUGE GROUP--Front Sump
Only separate parts serviced
GAUGE GP-OIL LEVEL (DIPSTICK)
6N-0811 GAUGE GP-OIL LEVEL (DIPSTICK)
6N811 OIL LEVEL GAUGE GROUP
Only separate parts serviced
OIL LEVEL GAUGE GROUP
4N-9183 OIL LEVEL GAUGE GROUP
4N9183 OIL LEVEL GAUGE GROUP
Only separate parts serviced
GAUGE GP-OIL LEVEL (DIPSTICK)
4N-7720 GAUGE GP-OIL LEVEL (DIPSTICK)
4N7720 OIL LEVEL GAUGE GROUP
Only separate parts serviced
LINES GP-ENGINE OIL
OIL LINES GROUP
9N-0550 OIL LINES GROUP
9N550 OIL LINES GROUP--Rear Sump
Only separate parts serviced
LINES GP-OIL
4N-8854 LINES GP-OIL
4N8854 OIL LINES GROUP
Only separate parts serviced
OIL LINES GROUP
9N-0533 OIL LINES GROUP
9N533 OIL LINES GROUP--Front Sump
Only separate parts serviced
PUMP GP-ENGINE OIL
PUMP GP-ENGINE OIL
9N-0541 PUMP GP-ENGINE OIL
9N541 OIL PUMP GROUP
DRIVE GP
4N-7390 DRIVE GP
4N7390 WATER PUMP DRIVE GROUP
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
Breather Element Added To PCV Valve
1985/07/01
New Hose Has More Resistance To Heat
1978/12/13
Specifications
Crankcase Ventilation Valve
3208 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Disassembly and Assembly
Crankcase Ventilator Valve
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Breather Element Added To PCV Valve{1300,1074}
1985/07/01
New Hose Has More Resistance To Heat{1074}
1978/11/27
Engine News
Rack Shut-Off Solenoid Can Be Removed And Engine Started When There Is An Emergency
1980/11/12
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance
1982/02/10
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems
1977/02/28
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Check Oil Level Carefully To Prevent Operation With Too Much Oil In Engine Crankcase{1316}
1981/03/02
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1982/07/12
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1984/06/04
Engine News
New Oil Filter And Filter Base Assemblies
1979/03/14
Inspection Of Oil Filters In Parts Stocks
1979/04/25
Inspection Of Parts Stocks Of 9L9200 Oil Filters
1979/06/06
Inspection Of Oil Filters When Bearing Problems Are Found
1979/08/08
Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures
1980/04/30
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals
1981/03/04
Two Oil Change Kits Have Oil Filters, Cooling System Conditioner
1982/09/22
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power
1983/10/26
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper
1986/03/01
Silicone Rubber Hoses Available For Engine Oil Cooler Water Lines
1986/05/01
New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01
New Oil Cooler And Filter Base Assembly And New Oil Cooler And Filter Base Group Have Stronger Mounting Flanges{1378,1306}
1994/05/01
New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01
New Coolant Temperature Regulator Has Flat Washer-Type By-Pass Valve
1978/12/13
Special Instruction
Instructions For 3208 Engine Oil Filter Base Installation{1306}
Instructions For 3208 Engine Oil Filter Base Installation{1306}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Installation Of 7W1762, 9N5233 And 9N3586 Oil Cooler Core Assemblies{1378}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Managing Engine Oil Service Intervals for Equipment Operating at High Altitudes{1261, 1308, 1348}
Specifications
Engine Oil Cooler And Filter
3208 INDUSTRIAL & MARINE ENGINES
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Disassembly and Assembly
Engine Oil Cooler
3208 INDUSTRIAL & MARINE ENGINES
Oil Filter Base & Engine Oil Cooler
3208 INDUSTRIAL & MARINE ENGINES
Oil Filter Base
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures{1378,1306}
1980/04/14
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/21
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals{1318}
1981/02/23
High Concentration Of Aluminum In Oil Analysis Can Be The Result Of Rocker Arm Support Wear{1318,1102}
1981/03/02
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Lubricant Recommendations Changed For All Caterpillar Engines To Combat Effects Of Fuel Sulfur{1318,0375,0374,1280}
1982/05/03
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1982/07/12
Two Oil Change Kits Have Oil Filters, Cooling System Conditioner {1318,1350}
1982/09/13
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Planned Engine Repairs{0374,0375,1318,0372}
1982/10/04
Engine Maintenance Information Films Available{1318,1352,0375}
1983/09/05
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1984/06/04
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Silicone Rubber Hoses Available For Engine Oil Cooler Water Lines{1378,1380}
1986/04/21
Field Repair Of Cooler Cores Made Of Aluminium{1063,1374,1375}
1977/09/05
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Engine Oil Refill Capacity Reduced {1318,1326}
1987/11/30
New Coolant Temperature Regulator Has Flat Washer-Type By-Pass Valve{1355}
1978/11/27
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
New Oil Filter And Filter Base Assemblies{1306,1378,1318}
1979/03/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Color Coded Dust Caps for S·O·S Ports Will Be Available {7770}
2003/12/01
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Engine News
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges
1980/04/30
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1982/08/25
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1984/06/20
Stronger Guide Assembly For Oil Level Gauge Used On Caterpillar-Built Engines In Massey-Ferguson Tractors
1977/06/22
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation Of 7N1754 Oil Level Gauge{1302}
Installation Of 7N1754 Oil Level Gauge{1302}
Specifications
Oil Level Gauge
3208 INDUSTRIAL & MARINE ENGINES
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/21
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1982/07/12
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1984/06/04
Stronger Guide Assembly For Oil Level Gauge Used On Caterpillar-Built Engines In Massey-Ferguson Tractors{1300}
1977/05/16
Special Instruction
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Installation of Dipstick Guide - 0R0724 and 0R0725 Remanufactured Short Blocks for 3204 Engines{1201, 1300, 7450}
Engine News
Hardened Washers Used In Engine Oil Lines; Locks Removed From Oil Pump
1985/08/01
New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups
1988/01/01
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
Special Instruction
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Service Magazine
Hardened Washers Used In Engine Oil Lines; Locks Removed From Oil Pump{1307}
1985/07/15
Silicone Rubber Hoses Available For Engine Oil Cooler Water Lines{1378,1380}
1986/04/21
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups{1307,1315,1304}
1987/12/21
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Engine News
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Service Magazine
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Engine News
New Oil Filter And Filter Base Assemblies
1979/03/14
Inspection Of Oil Filters In Parts Stocks
1979/04/25
Inspection Of Parts Stocks Of 9L9200 Oil Filters
1979/06/06
Inspection Of Oil Filters When Bearing Problems Are Found
1979/08/08
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges
1980/04/30
Visual Checks And Easy Tests Can Be Of Assistance When Troubleshooting Coolant Leakage Into The Lubrication System
1980/07/09
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Engine Oil Refill Capacity Reduced
1987/12/01
New Oil for All Engines Burning Low-Sulfur Fuel (0.05% or less) Except The 3600 Family Of Engines{1318}
1995/02/01
Stronger Guide Assembly For Oil Level Gauge Used On Caterpillar-Built Engines In Massey-Ferguson Tractors
1977/06/22
Service Magazine
Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures{1378,1306}
1980/04/14
Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/21
Two New Oil Filter Assemblies Available; Always Use Correct Oil Filter And Follow Caterpillar Change Intervals{1318}
1981/02/23
High Concentration Of Aluminum In Oil Analysis Can Be The Result Of Rocker Arm Support Wear{1318,1102}
1981/03/02
Check Oil Level Carefully To Prevent Operation With Too Much Oil In Engine Crankcase{1316}
1981/03/02
New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/09
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1982/07/12
New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests{0372,1318}
1982/09/27
Planned Engine Repairs{0374,0375,1318,0372}
1982/10/04
Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge{1302,1316,1318}
1984/06/04
New Relief Valve Guide Used In Oil Pump{1315}
1984/07/16
Oil Filter Inspection Can Save Additional Internal Engine Damage{1318}
1985/06/17
Breather Element Added To PCV Valve{1300,1074}
1985/07/01
Hardened Washers Used In Engine Oil Lines; Locks Removed From Oil Pump{1307}
1985/07/15
Fuel Sulfur Analyzer Available{0651,1280,1318}
1986/01/13
Oil Total Base Number (TBN) Test Kit Available{1300}
1986/01/20
Engine Oil Filter Element Has Metal Wrapper Instead Of Paper Wrapper{1318}
1986/03/10
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
Separate Parts Of Oil Pump Cover Now Available{1304,1314}
1977/10/17
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Black Light Leak Detection Kit Available For Oil, Fuel and Cooling Systems {0774,1250,1300,1350}
1987/05/11
New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups{1307,1315,1304}
1987/12/21
Use Correct Procedure To Clean The Engine Lubrication System If Permanent Type Antifreeze (Ethylene Glycol) Is In The Engine{1318,1350}
1979/02/19
New Oil Filter And Filter Base Assemblies{1306,1378,1318}
1979/03/19
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. Factories{1318}
1979/10/15
Former Oil Pump Group Is Now Used Again{1304}
1979/11/26
Improved Prelube Pressure Switch Available {1400,1435,1319}
1995/09/11
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
Fast Fuel Delivery Couplings And Fast Oil Change Couplings Are Available For All Caterpillar Equipment{0671,1273,1279,1325}
1979/10/08
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Engine News
Former Oil Pump Group Is Now Used Again
1979/11/28
New Clearance Specifications For Oil Pump Rotor Tip
1981/11/25
Improved Relief Valve Guide Decreases Maximum Oil Pressure During Cold Weather Starts
1982/05/12
Reconditioning Of Oil Pump Covers
1982/10/20
New Relief Valve Guide Used In Oil Pump
1984/07/11
Hardened Washers Used In Engine Oil Lines; Locks Removed From Oil Pump
1985/08/01
New Assembly Procedure Helps Prevent Oil Pump Failures
1987/02/01
New Rotor Assembly For Engine Oil Pump Has A Drilled Passage For Better Lubrication Of Oil Pump Bearing
1977/05/25
Separate Parts Of Oil Pump Cover Now Available
1977/12/14
Specifications
Oil Pump<BR> (with plunger type relief valve)
3208 INDUSTRIAL & MARINE ENGINES
Oil Pump<BR> (with belleville washer type relief valve)
3208 INDUSTRIAL & MARINE ENGINES
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Disassembly and Assembly
Timing Gear Cover &amp; Oil Pump
3208 INDUSTRIAL & MARINE ENGINES
Oil Pump &amp; Relief Valve
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
New Clearance Specifications For Oil Pump Rotor Tip{1304,0374}
1981/11/09
Improved Relief Valve Guide Decreases Maximum Oil Pressure During Cold Weather Starts{1315,1304}
1982/04/26
Reconditioning Of Oil Pump Covers{1304}
1982/10/25
New Relief Valve Guide Used In Oil Pump{1315}
1984/07/16
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Hardened Washers Used In Engine Oil Lines; Locks Removed From Oil Pump{1307}
1985/07/15
Special Tools For Complete Repair Of Water Pump In Direct Injection Engines{0620,1361}
1977/05/02
New Rotor Assembly For Engine Oil Pump Has A Drilled Passage For Better Lubrication Of Oil Pump Bearing{1304}
1977/05/09
Separate Parts Of Oil Pump Cover Now Available{1304,1314}
1977/10/17
New Assembly Procedure Helps Prevent Oil Pump Failures{1304,4457}
1987/02/09
New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups{1307,1315,1304}
1987/12/21
Former Oil Pump Group Is Now Used Again{1304}
1979/11/26
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Engine News
New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups
1988/01/01
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Service Magazine
New Suction Bell Assemblies, Bolts, And Washers Used In Sump Oil Lines Groups{1307,1315,1304}
1987/12/21
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Engine News
Oil Total Base Number (TBN) Test Kit Available
1986/02/01
New 4C5084 Oil Filter Cutter Replaces Former 6V7905 Filter Cutter
1990/11/01
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Reuse And Salvage Guidelines
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Contamination Control Guidelines
Service Magazine
Lubrication For A Rebuilt Engine{0374,1000}
1978/06/19
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Portable Contamination Monitor Group Provides a Lower Cost Alternative to Particle Counting {0781, 0784, 0786, 1300, 5050}
2004/12/01
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
1980/09/15
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
Truck Engine News
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Engine News
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
243-3133 Quick Connect Coupler (Fluid Sampling) Provides A Coupler for Portable Particle Analyzers {0707, 0717, 0731, 0732, 0738}
2004/07/05
Single Purpose Fluid Sampling Valves and Dual Purpose Fluid Sampling Valves Require Different Quick Connect Couplers {0645, 7542}
2004/12/01
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.