9N2613 CONNECTING ROD AND PISTON GROUP--8 Required Part of 9N2139 Short Block Group listed on Page 44B-2 3208



BASIC ENGINE
PISTON & ROD GP
CYLINDER HEAD GP
VALVE MECHANISM GP
LIFTING GP-ENGINE
HOUSING GP-FRONT
LIFTING GP-ENGINE

ENGINE - MACHINE 3208 ENGINE - MACHINE 90N
 3208 INDUSTRIAL ENGINE 90N00001-06120 UEG0825S 3208 90N   (2018)

BASIC ENGINE

PISTON & ROD GP
PISTON & ROD GP
9L-6980 PISTON & ROD GP
PISTON & ROD GP
9N-0150 PISTON & ROD GP
PISTON & ROD GP
9N-2613 PISTON & ROD GP
PISTON & ROD GP
9N-3538 PISTON & ROD GP
 

#UEG0825S0070
 

9N-2613: PISTON & ROD GP

9N2613 CONNECTING ROD AND PISTON GROUP--8 Required
Part of 9N2139 Short Block Group listed on Page 44B-2
c162486 UEG0825S
9N2613 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9L-6979 [1] PISTON GROUP (standard)  
  9N-0579 H [1] PISTON GROUP (.020 in. oversize)  
  9N-0580 H [1] PISTON GROUP (.040 in. oversize)  
2. 9L-9316 [1] RING (standard-oil)  
    (Part of 9L6979 Group)
  9L-9673 [1] RING (.020 in. oversize-oil)  
    (Part of 9N579 Group)
  9L-9323 [1] RING (.040 in. oversize-oil)  
    (Part of 9N580 Group)
3. 9L-6233 [1] RING (standard-compression)  
    (Part of 9L6979 Group)
  9N-0581 [1] RING (.030 in. oversize)  
    (Part of 9N579 Group)
  9N-0578 [1] RING (.040 in. oversize)  
    (Part of 9N580 Group)
4. 1J-6473 [2] RING  
5. 9L-6272 R [1] ROD ASSEM.  
    (Includes)
6. 9L-8382 [1] BEARING  
7. 9L-8225 [2] BOLT  
8. 9L-7669 [2] NUT  
9. 9N-2601 [1] BEARING  
  6N-9837 CH BEARING (.010 in. undersize)  
  6N-9838 CH [1] BEARING (.020 in. undersize)  
10. 9L-9889 [1] PIN  
  9N-0875 H [1] PISTON RING GROUP  
    (Includes Complete Set of Rings for One Piston)
  H   NOT PART OF CONNECTING ROD & P
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0825S0071
 

9N-3538: PISTON & ROD GP

9N3538 CONNECTING ROD & PISTON GROUP--8 Required--Field Installation
Part of 9N5190 Short Block Group shown on Page 44B-2
c222630 UEG0825S
9N3538 PISTON & ROD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 7N-9803 [1] PIN  
2. 1J-6473 [2] RETAINER  
3. 9N-3504 [1] ROD ASSEM.  
    (Includes)
  9N-1354 [1] BEARING  
4. 9L-8225 [2] BOLT  
  9L-7669 [2] NUT  
5. 9N-2601 [1] BEARING (standard)  
  6N-9837 H [1] BEARING (.01 in. undersize)  
  6N-9838 H [1] BEARING (.02 in. undersize)  
  7N-4352 H [1] BEARING (.05 in. undersize)  
6. 9N-3744 J [1] PISTON GROUP (standard)  
    (Includes)
7. 9L-6233 [1] RING (standard-compression)  
8. 9L-9316 [1] RING (standard-oil)  
9. 9N-5445 H [1] PISTON GROUP (.02 in. oversize)  
    (Includes)
10. 9L-9673 [1] RING (oversize-oil)  
11. 9N-0581 [1] RING (oversize-compression)  
12. 9N-5446 H [1] PISTON GROUP (.04 in. oversize)  
    (Includes)
13. 9L-9323 [1] RING (oversize-oil)  
14. 9N-0578 [1] RING (oversize-compression)  
  9N-0875 J [1] RING GROUP  
    (Includes complete set of rings for one piston)
  H   NOT PART OF CONNECTING ROD & P
 

#UEG0825S0072
 

9N-0732: CYLINDER HEAD GP

9N732 CYLINDER HEAD GROUP
Only separate parts serviced
c201693 UEG0825S
9N0732 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 0L-1329 [2] BOLT (3 in. long-location "E")  
2. 3H-7654 [36] WASHER  
3. 0S-1571 [1] BOLT (1.75 in. long-location "C") (Left Head)  
  9L-9166 STUD BOLT (3.6 in. long-Right Head)  
4. 5M-2894 [5] WASHER  
5. 5M-6213 [2] PLUG  
6. 5B-2638 [4] BOLT (5.25 in. long-location "D")  
7. 1A-5964 [2] BOLT (4.75 in. long-location "B")  
8. 9L-7627 [2] HEAD ASSEM.  
    (Each Includes)
  9L-7657 [1] PLUG  
9. 9L-7622 [4] INSERT (Exhaust)  
10. 0L-1329 [3] BOLT (3" Long-Location "H")  
11. 8M-5860 [4] PLUG  
12. 9L-9190 [16] SPRING (Outer)  
13. 9L-9425 [16] RETAINER  
14. 2A-4429 [32] LOCK  
15. 9L-8889 [16] WASHER  
16. 9L-9172 [16] SPRING (Inner)  
17. 9L-7682 [8] VALVE (intake)  
  2N-8943 H [8] INSERT (intake)  
18. 2B-0947 [8] BOLT (2.25 in. long-location "G")  
19. 2B-2006 [12] BOLT (4.75 in. long-Location "F")  
20. 6F-5282 [8] BOLT (5.25 in. long-Location "A")  
21. 9L-9164 [2] GASKET  
22. 9L-9251 [2] CLIP (left head)  
23. 9L-7683 [8] VALVE (exhaust)  
  H   NOT PART OF CYLINDER HEAD GROU
 

#UEG0825S0073
 

9N-0734: VALVE MECHANISM GROUP

9N734 VALVE MECHANISM GROUP
Only separate parts serviced
c201692 UEG0825S
9N0734 VALVE MECHANISM GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9L-6386 [16] ARM ASSEM.  
  9L-9398 [16] WASHER  
2. 9L-9315 [2] SHAFT ASSEM.  
3. 9L-8094 [2] BRACKET  
4. 2B-2694 [4] BOLT (2 in. long)  
  9L-8076 [4] WASHER  
  9M-1974 [4] WASHER  
5. 9L-8198 [16] SCREW  
6. 9L-7712 [16] NUT  
7. 9L-8623 [16] ROD ASSEM.  
8. 9L-9630 [16] TAPPET ASSEM.  
9. 1D-4540 [8] BOLT  
  2A-5328 [8] LOCK  
10. 9L-9848 [8] CLIP  
 

#UEG0825S0074
 

9N-0730: COVER GP-VALVE MECHANISM

9N730 VALVE MECHANISM COVER GROUP
Only separate parts serviced
c201690 UEG0825S
9N0730 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9L-7430 [1] COVER  
2. 9L-8439 [1] CAP ASSEM.  
3. 9L-8925 [16] BOLT  
4. 9L-7490 [2] GASKET  
5. 9L-7429 [1] COVER  
 

#UEG0825S0075
 

9L-6978: COVER GP-VALVE MECHANISM

9L6978 VALVE MECHANISM COVER GROUP
Only separate parts serviced
c201763 UEG0825S
9L6978 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9L-7897 [2] COVER ASSEM.  
    (Each Includes)
  9L-7430 [1] COVER  
2. 9L-8439 [2] CAP  
3. 9L-8925 [16] BOLT  
4. 9L-8020 [2] GASKET  
5. 9L-9849 [1] COVER  
  9L-8786 [1] GASKET  
6. 9L-9850 [4] BOLT  
  9L-9021 [2] LOCK  
 

#UEG0825S0076
 

9L-6927: COVER GP-VALVE MECHANISM

9L6927 VALVE MECHANISM COVER GROUP
Only separate parts serviced
c201756 UEG0825S
9L6927 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9L-7430 [2] COVER  
2. 9L-8439 [2] CAP ASSEM.  
3. 9L-8925 [16] BOLT  
4. 9L-8020 [2] GASKET  
5. 9L-9849 [1] COVER  
  9L-8786 [1] GASKET  
6. 9L-9850 [4] BOLT  
  9L-9021 [2] LOCK  
 

#UEG0825S0077
 

4N-5871: LIFTING GROUP

4N5871 LIFTING GROUP
Only separate parts serviced
c201381 UEG0825S
4N5871 LIFTING GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9L-8625 [1] BRACKET (R.H.)  
2. 9L-9847 [1] BRACKET (L.H.)  
3. 4F-8965 [2] BOLT  
4. 4S-9191 [2] WASHER  
    (Used Without Low Mounted Alternator)
5. 4F-8965 [2] BOLT  
6. 4S-9191 [2] WASHER  
 

#UEG0825S0078
 

9N-0560: COVER GP-FRONT HOUSING

9N560 FRONT HOUSING COVER GROUP
Only separate parts serviced
c205638 UEG0825S
9N0560 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. 9N-1827 C [1] COVER  
2. 4F-8965 [4] BOLT  
  4S-9191 [4] WASHER  
3. 9N-1828 C [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
 

#UEG0825S0079
 

9N-0191: LIFTING GP

LIFTING (9N191 N/S)
c204325 UEG0825S
9N0191 LIFTING GP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

Pos. Part No Qty Parts name Comments
1. [ 1] BRACKET  
2. 4F-8965 [ 2] BOLT  
2. 4S-9191 [ 2] WASHER  
 

Information:

Engine News
5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods
1979/01/24
New Piston And Connecting Rod Are Tapered In Area Of Piston Pin
1979/03/14
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Inspect Piston Skirts During Engine Overhaul Procedures
1981/07/01
Top Rings For Pistons Have Two Designs
1981/08/26
List Of Main And Connecting Rod Bearings Currently Available
1982/06/16
Carbon Cutting On Piston Top Land
1982/06/16
New Compression Ring Available For Control Of Excessive Oil Consumption
1982/09/22
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/11/10
New Piston Design
1983/01/19
Parts Service Information For Pistons
1983/02/16
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure
1983/04/27
New Piston Oil Rings
1983/09/14
Parts Service Information For Pistons
1984/01/18
Remanufactured Connecting Rod Assemblies
1984/02/22
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
New Main And Connecting Rod Bearings Have Copper Bond Material
1984/10/03
Increase Piston Reuse With Keystone Piston Ring Gauge Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/12/01
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines
1987/07/01
New Connecting Rod and Main Bearing Kits Available
1989/11/01
Parts Service Information For Pistons
1990/05/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
Improved Piston Rings Available{1215}
1997/07/01
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor
1977/03/15
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength
1977/10/12
Excessive Oil Consumption Can Be Caused By Dirt In Air Inlet System Or By Flaking Of The Piston Compression Ring
1977/12/14
New Guidelines for Inspecting Pistons {1214}
2006/01/02
Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod
3208 INDUSTRIAL & MARINE ENGINES
Pistons And Rings
3208 INDUSTRIAL & MARINE ENGINES
Bearings For Connecting Rods And Mains
3208 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Connecting Rod Bearings
3208 INDUSTRIAL & MARINE ENGINES
Pistons & Connecting Rod Assemblies
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Inspect Piston Skirts During Engine Overhaul Procedures{1214,1213}
1981/06/08
Top Rings For Pistons Have Two Designs{1215,1214}
1981/07/13
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
List Of Main And Connecting Rod Bearings Currently Available{1203,1219,1230,1226,1227}
1982/06/07
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
New Compression Ring Available For Control Of Excessive Oil Consumption{1215}
1982/08/16
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
New Piston Design Decreases Oil Consumption{1214,1215}
1982/12/20
Parts Service Information For Pistons{1214,1225}
1983/01/31
New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure {0374,1223,1216,1201}
1983/04/18
Installation Of Bearing For Connecting Rod Piston Pin{1219}
1983/05/09
Reuse Of Engine Bearings{1230}
1983/05/16
New Piston Oil Rings{1215}
1983/09/05
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Parts Service Information For Pistons{1214,1225}
1984/01/09
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
New Main And Connecting Rod Bearings Have Copper Bond Material{1203,1219,1230}
1984/10/01
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Lock Now Available For Connecting Rod Bolt Used In TU-FL0501 Air Compressor{1065}
1977/02/28
Improved Main, Thrust And Connecting Rod Bearings Have Aluminum Alloy With More Strength{1230}
1977/10/17
Excessive Oil Consumption Can Be Caused By Dirt In Air Inlet System Or By Flaking Of The Piston Compression Ring{1213,1215}
1977/12/12
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods{0622,1214,1218}
1979/01/15
Main Bearings Now Have Larger Diameter Oil Hole For Better Lubrication Of Main And Rod Bearings{1203,1219,1300}
1979/03/05
New Piston And Connecting Rod Are Tapered In Area Of Piston Pin{1213,1214,1218,1219}
1979/03/05
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Connecting Rod and Main Bearing Kits Available{1230,1203,1219}
1989/10/30
Parts Service Information For Pistons{1214,1225,1331}
1990/05/14
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Guidelines for Inspecting Pistons {1214}
2006/01/02

Caterpillar Parts SIS Catalog 3208 :

PISTON & ROD GP
9N-0150 PISTON & ROD GP
CAMSHAFT GP-SINGLE
9N-0728 CAMSHAFT GP-SINGLE
PISTON & ROD GP
9L-6980 PISTON & ROD GP
CRANKSHAFT BEARING REPLACEMENTS
CRANKSHAFT BEARING REPLACEMENTS
GASKET KITS
PULLEY GP-CRANKSHAFT
9L-7461 PULLEY GP-CRANKSHAFT
CRANKSHAFT COVER GROUP
3N-1291 CRANKSHAFT COVER GROUP
CRANKSHAFT GP
4N-5465 CRANKSHAFT GP
PISTON & ROD GP
9N-3538 PISTON & ROD GP
CYLINDER HEAD GP
9N-0732 CYLINDER HEAD GP
VALVE MECHANISM GROUP
9N-0734 VALVE MECHANISM GROUP
COVER GP-VALVE MECHANISM
9N-0730 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9L-6978 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
9L-6927 COVER GP-VALVE MECHANISM
LIFTING GROUP
4N-5871 LIFTING GROUP
COVER GP-FRONT HOUSING
9N-0560 COVER GP-FRONT HOUSING

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California