AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4N5873 FUEL INJECTION LINES GROUP--Part 1 of 2 Serial No. 90N1 to 90N4498 inclusive 3208 ENGINE - MACHINE


FUEL SYSTEM
LINES GP-FUEL
FILTER GP-FUEL
ELECTRICAL AND STARTING SYSTEM
STARTING AID GP
FUEL SYSTEM
SEPARATOR GP-WATER
FILTER GP-FUEL

ENGINE - MACHINE 3208 ENGINE - MACHINE 90N
 3208 INDUSTRIAL ENGINE 90N00001-06120 UEG0825S 3208 90N   (2018)

FUEL SYSTEM

LINES GP-FUEL
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
FUEL FILTER LINES GROUP
4N-5872 FUEL FILTER LINES GROUP
FUEL FILTER LINES GROUP
6N-1206 FUEL FILTER LINES GROUP
 

#UEG0825S0200
 

4N-5873: FUEL INJECTION LINES GROUP

4N5873 FUEL INJECTION LINES GROUP--Part 1 of 2
Serial No. 90N1 to 90N4498 inclusive
c158568 UEG0825S
4N5873 FUEL INJECTION LINES GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-9372 [4] LOCK  
2. 9L-6048 [1] LINE ASSEM. (no. 8)  
3. 9L-6046 [1] LINE ASSEM. (no. 6)  
4. 9L-9160 [4] CLAMP ASSEM.  
5. 9L-8714 [8] CLAMP (tapped)  
6. 9L-9014 [20] SCREW  
  3B-4502 [20] LOCKWASHER  
7. 9L-6044 [1] LINE ASSEM. (no. 4)  
8. 0L-2072 C [2] CLIP (long)  
9. 2B-2404 C [1] CLIP (short)  
10. 9L-9251 C [1] CLIP  
11. 9L-8713 [4] CLAMP  
12. 9L-6042 [1] LINE ASSEM. (no. 2)  
13. 9L-6047 [1] LINE ASSEM. (no. 7)  
14. 9L-6041 [1] LINE ASSEM. (no. 1)  
15. 9L-8715 [4] CLAMP  
  9L-8716 [4] CLAMP (tapped)  
16. 9L-6043 [1] LINE ASSEM. (no. 3)  
17. 9L-6045 [1] LINE ASSEM. (no. 5)  
18. 9L-7675 [8] ADAPTER ASSEM.  
  6F-4855 C [1] SEAL  
19. 9L-7883 [8] NOZZLE ASSEM.  
  1H-1023 [1] SEAL  
20. 9L-9099 [1] WASHER  
21. 9L-9098 [1] SEAL  
22. 9L-8388 [8] SPACER  
23. 9L-8134 [8] CLAMP ASSEM.  
24. 9L-6439 [8] BOOT  
25. 9L-8970 [1] CLAMP  
26. 9L-8969 [1] CLAMP  
27. 7K-8332 [1] INSERT  
28. 9N-0911 C [1] TUBE ASSEM.  
29. 8L-8413 [6] TIE  
30. 5P-3395 [1] ELBOW  
  9L-7663 J [8] PLUG (fuel nozzle inlet)  
  6H-3687 [8] CAP (fuel nozzle tip)  
  4N-5730 [8] SHIM (fuel nozzle)  
    .005 in. (.127 mm) thick Pressure Adjusting
  C   INDICATES CHANGE
  J   NOT SHOWN-NOT PART OF 4N5873 F
 

#UEG0825S0201
 

4N-5873: FUEL INJECTION LINES GROUP

4N5873 FUEL INJECTION LINES GROUP--Part 2 of 2
Serial No. 90N1 to 90N4498 inclusive
Only separate parts serviced
c150159 UEG0825S
4N5873 FUEL INJECTION LINES GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-7857 [2] MANIFOLD ASSEM.  
2. 9L-8969 [4] CLAMP  
3. 9L-8344 [2] CONNECTOR  
4. 9L-7834 [2] TUBE  
5. 9L-8095 [2] FITTING  
6. 9L-7848 [1] TUBE ASSEM. (fuel bleed R.H.)  
7. 1D-4717 [1] NUT  
8. 4N-5555 [1] JUNCTION BLOCK  
11. 9L-7851 [1] TUBE ASSEM. (automatic bleed)  
12. 9L-7849 [1] TUBE ASSEM. (fuel bleed L.H.)  
13. 5K-9243 [2] ELBOW  
14. 6L-3616 [1] CONNECTOR  
15. 004-4914 [1] TEE  
17. 5M-2894 C [1] WASHER  
  C   INDICATES CHANGE
 

#UEG0825S0202
 

4N-5873: FUEL INJECTION LINES GROUP

4N5873 FUEL INJECTION LINES GROUP--Part 1 of 2
Serial No. 90N4499-Up
c158569 UEG0825S
4N5873 FUEL INJECTION LINES GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9M-1974 C [1] WASHER  
2. 9L-6048 [1] LINE ASSEM. (no. 8)  
3. 9L-6046 [1] LINE ASSEM. (no. 6)  
4. 9L-9160 C [3] CLAMP ASSEM.  
5. 9L-8714 C [7] CLAMP (tapped)  
6. 9L-9014 C [16] SCREW  
  3B-4502 [16] LOCKWASHER  
7. 9L-6044 [1] LINE ASSEM. (no. 4)  
8. 0L-2072 C [2] CLIP (long)  
9. 2B-2404 [1] CLIP (short)  
10. 9L-9251 [1] CLIP  
11. 9L-8713 [4] CLAMP  
12. 9L-6042 [1] LINE ASSEM. (no. 2)  
13. 9L-6047 C [1] LINE ASSEM. (no. 7)  
14. 9N-0861 C [1] LINE ASSEM. (no. 1)  
15. 9L-8715 C [2] CLAMP  
  9L-8716 [2] CLAMP (tapped)  
16. 9N-0863 C [1] LINE ASSEM. (no. 3)  
17. 9L-6045 C [1] LINE ASSEM. (no. 5)  
18. 9L-7675 [8] ADAPTER ASSEM.  
  6F-4855 C [1] SEAL  
19. 9L-7883 [8] NOZZLE ASSEM.  
  1H-1023 [1] SEAL  
20. 9L-9099 [1] WASHER  
21. 9L-9098 [1] SEAL  
22. 9L-8388 [8] SPACER  
23. 9L-8134 [8] CLAMP ASSEM.  
24. 9L-6439 [8] BOOT  
25. 9L-8970 [1] CLAMP  
26. 9L-8969 [1] CLAMP  
27. 7K-8332 [1] INSERT  
28. 9N-0911 [1] TUBE ASSEM.  
29. 8L-8413 [6] TIE  
30. 5P-3395 [1] ELBOW  
  9L-7663 J [8] PLUG (fuel nozzle inlet)  
  6H-3687 J [8] CAP (fuel nozzle tip)  
  4N-5730 J [8] SHIM (fuel nozzle) .005 in. (.127 mm) thick Pressure Adjusting  
  C   INDICATES CHANGE
  J   NOT SHOWN-NOT PART OF 4N5873 F
 

#UEG0825S0203
 

4N-5873: FUEL INJECTION LINES GROUP

4N5873 FUEL INJECTION LINES GROUP--Part 2 of 2
Serial No. 90N4499-Up
Only separate parts serviced
c152648 UEG0825S
4N5873 FUEL INJECTION LINES GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-7857 [2] MANIFOLD ASSEM.  
2. 9L-8969 [4] CLAMP  
3. 9L-8344 [2] CONNECTOR  
4. 9L-7834 [2] TUBE  
5. 9L-8095 [2] FITTING  
6. 9L-7848 [1] TUBE ASSEM. (fuel bleed R.H.)  
7. 1D-4717 [1] NUT  
8. 4N-5555 [1] JUNCTION BLOCK  
9. 9L-9372 [4] LOCK  
11. 9L-7851 [1] TUBE ASSEM. (automatic bleed)  
12. 9L-7849 [1] TUBE ASSEM. (fuel bleed L.H.)  
13. 5K-9243 [2] ELBOW  
14. 6L-3616 [1] CONNECTOR  
15. 004-4914 [1] TEE  
17. 5M-2894 [1] WASHER  
 

#UEG0825S0204
 

4N-5872: FUEL FILTER LINES GROUP

4N5872 FUEL FILTER LINES GROUP
Only separate parts serviced
c201382 UEG0825S
4N5872 FUEL FILTER LINES GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-9478 [1] TUBE ASSEM.  
2. 2M-7943 [2] CLAMP  
3. 0S-1615 [1] BOLT  
  1B-4330 [1] NUT  
  5P-0537 [2] WASHER  
4. 5P-2559 [1] FITTING  
5. 030-6816 [2] ELBOW  
6. 1J-9671 [2] SEAL  
7. 4N-9479 [1] TUBE ASSEM.  
8. 4B-9233 [1] CLIP  
9. 1P-6909 [4] STRIP ASSEM.  
10. 5M-5690 [8] DAMPER  
11. 0S-0550 [1] CLIP  
12. 4H-6141 [1] CONNECTOR  
13. 9S-2299 [4] STRIP  
14. 1D-4716 [4] NUT  
  9M-1974 [4] WASHER  
 

#UEG0825S0205
 

6N-1206: FUEL FILTER LINES GROUP

6N1206 FUEL FILTER LINES GROUP
Only separate parts serviced
c202032 UEG0825S
6N1206 FUEL FILTER LINES GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-8031 [1] TUBE ASSEM.  
2. 2M-7943 [2] CLAMP  
3. 0S-1615 [1] BOLT  
  1B-4330 [1] NUT  
  5P-0537 [2] WASHER  
4. 5P-2559 [1] FITTING  
5. 030-6816 [2] ELBOW  
6. 1J-9671 [2] SEAL  
7. 3N-8032 [1] TUBE ASSEM.  
8. 4B-9233 [1] CLIP  
9. 1P-6909 [4] STRIP ASSEM.  
10. 5M-5690 [8] DAMPER  
11. 0S-0550 [1] CLIP  
12. 4H-6141 [1] CONNECTOR  
13. 9S-2299 [4] STRIP  
14. 1D-4716 [4] NUT  
  9M-1974 [4] WASHER  
 

#UEG0825S0206
 

9N-3771: INJECTION GP-CETANE

9N3771 CETANE INJECTION GROUP--Field Installation
Note: Reduces while smoke when starting engine in cold temperatures
c218068 UEG0825S
9N3771 INJECTION GP-CETANE Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-3335 [2] STRAP  
2. 4B-1248 [2] SCREW-MACHINE  
  4B-2051 [2] NUT  
  4B-4674 [4] WASHER  
3. 9N-3334 [1] TANK AS  
4. 9N-3336 [1] CAP AS  
5. 8L-5000 [1] SWITCH-PUSH (START)  
6. 9N-3828 [1] HARNESS AS-WIRING  
  5P-5623 D WIRE 6.2M(242IN)  
7. 1S-9593 [3] STRAP-CABLE  
8. 2L-8075 [2] TERMINAL  
9. 031-5637 [1] HOLDER-FUSE  
  3P-8989 [1] FUSE  
10. 2L-8076 [1] TERMINAL  
11. 6N-9587 [1] CONNECTOR  
12. 7G-1018 [1] CONTROL GP-ELECTRONIC  
13. 5P-5009 [1] REDUCER-FLARED  
14. 031-5894 [1] TEE  
15. 3J-7354 [3] SEAL-O-RING  
16. 9N-3770 [1] ORIFICE  
17. 9L-8791 [1] SOLENOID  
18. 030-6984 [1] CONNECTOR-FLARED  
19. 031-7224 I [1] HOSE AS  
  5P-0733 D HOSE 2.5M(98.4IN)  
20. 001-6285 [2] COUPLING  
21. 8L-6557 [1] CONNECTOR  
22. 9N-3778 [1] FILTER AS-FUEL  
23. 5H-7826 [1] NIPPLE-PIPE  
24. 053-3567 [2] BRACKET  
  9N-3620 F [1] FILM-INSTRUCTION (LOCATED ON DASH)  
  9N-3621 F [1] FILM-CAUTION (LOCATED ON TANK)  
  D   ORDER BY THE METER
  F   NOT SHOWN
  I   SEE HOSE FABRICATION GUIDE
 

#UEG0825S0207
 

7N-0950: SEPARATOR GP-WATER

7N950 WATER SEPARATOR GROUP
AN ATTACHMENT
c163074 UEG0825S
7N0950 SEPARATOR GP-WATER Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7624 [1] BASE  
2. 6N-7617 [1] ELEMENT  
3. 5M-6213 [2] PLUG  
4. 2P-4173 [1] COCK  
5. 6N-7618 [1] CLAMP  
 

#UEG0825S0208
 

4N-5868: FILTER GP-FUEL

4N5868 FUEL FILTER GROUP
Only separate parts serviced
c201378 UEG0825S
4N5868 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-5965 [1] BRACKET  
2. 0S-1618 [2] BOLT  
  1D-4716 [2] NUT  
  9M-1974 [2] WASHER  
3. 4N-8897 [1] BASE ASSEM.  
    (Includes)
4. 9S-8004 [1] PLUG  
5. 3J-1907 [1] SEAL  
6. 8F-2621 [1] SPRING  
7. 4N-3298 [1] SEAT  
8. 4N-3297 [1] DISK  
9. 4N-3296 [1] SPRING  
10. 9S-4167 [1] STUD  
11. 1P-2299 [1] FILTER ASSEM.  
12. 0T-0055 [1] BOLT  
  1D-4717 [1] NUT  
  5M-2894 [1] WASHER  
 

#UEG0825S0209
 

6N-1204: FUEL FILTER GROUP

6N1204 FUEL FILTER GROUP
Only separate parts serviced
c202031 UEG0825S
6N1204 FUEL FILTER GROUP Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-8897 [1] BASE ASSEM.  
    (Includes)
2. 9S-8004 [1] PLUG  
  3J-1907 [1] SEAL  
3. 8F-2621 [1] SPRING  
4. 4N-3298 [1] SEAT  
5. 4N-3297 [1] DISK  
6. 4N-3296 [1] SPRING  
7. 9S-4167 [1] STUD  
8. 1P-2299 [1] FILTER ASSEM.  
9. 0S-1618 [2] BOLT  
  1D-4716 [2] NUT  
  9M-1974 [4] WASHER  
10. 0T-0055 [1] BOLT  
  1D-4717 [1] NUT  
  5M-2894 [2] WASHER  
11. 3N-8030 [1] BRACKET  
 

Information:

Engine News
New Fuel Injection Nozzles Are Used In 3208 Engines
1979/03/14
Do Not Use Later 9N3979 Nozzle Assemblies In Place Of Earlier Nozzle Assemblies
1979/05/23
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines
1979/06/06
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies
1979/06/20
Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures
1980/04/30
Improvements Made To Water Separator Groups
1980/04/30
Use Only Caterpillar Water Separator Elements
1980/10/01
Inspect All Engine Oil And Fuel Filter Elements Before Installation
1980/11/12
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations
1981/04/01
Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/05/20
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03
Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26
Improved Water Separator Group Used
1982/06/16
Wrong Water Separator Element Will Not Remove Water
1982/08/25
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/22
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
Tune-Up Kit And Remanufactured Nozzles Available
1984/09/12
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles
1984/10/24
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines
1985/09/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles
1986/10/01
Water Separator Available
1987/03/01
Check Valve Added To Keep Air From Entering Fuel System
1988/10/01
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles
1989/03/01
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque
1989/09/01
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN)
1992/04/01
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/01
An Improved O-Ring Seal And Proper Use Of Adapter Locks Reduces Oil Leaks{1252}
1996/10/01
Troubleshooting Reminder For Engine Low Power Or Intermittent Low Power Symptoms{1250,1252,1256,1260,1261,1273}
1998/10/01
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage
1977/03/15
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line
1977/09/28
Water Separators Needed On Engines In The Field With SMFS
1977/12/14
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage
1978/04/19
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line
1978/07/05
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned
1978/08/16
Special Instruction
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Installation Of 9N6519 Or 1W1166 Water Separator Group{1263}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Service Letter-NACD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Australia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CFEL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-CSARL
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Americas
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Specifications
Fuel Injection Nozzles
3208 INDUSTRIAL & MARINE ENGINES
Fuel Filter Base
3208 INDUSTRIAL & MARINE ENGINES
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Service Letter-China
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Asia
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-APD
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Product Support Program For Replacing Failed Fuel Injection Nozzles On Certain 3208 Engines
Service Letter Extension
Service Letter Extension
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Disassembly and Assembly
Fuel Injection Lines
3208 INDUSTRIAL & MARINE ENGINES
Fuel Return Manifolds
3208 INDUSTRIAL & MARINE ENGINES
Fuel Injection Nozzles
3208 INDUSTRIAL & MARINE ENGINES
Service Magazine
Improvements Made To Water Separator Groups{1263}
1980/05/05
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
Reverse Flow Check Valves And Check Valves With A Groove Can Not Be Used In Place Of Each Other{1251,1272,1254}
1980/09/15
Use Only Caterpillar Water Separator Elements{1263}
1980/09/15
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Larger Valve Springs{1108,1101,1252}
1981/05/04
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Wrong Water Separator Element Will Not Remove Water{1263}
1982/05/17
Improved Water Separator Group Used {1263}
1982/05/31
New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure{1254}
1982/08/09
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Tool Makes Installation Of Carbon Stop Seals Easier{0622,1254}
1982/10/04
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power{1252}
1983/10/17
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
Tune-Up Kit And Remanufactured Nozzles Available{1254,1074,1107}
1984/09/03
Information For Testing 8N7004, 4W7011 And 4W7015 Fuel Injection Nozzles{1254}
1984/10/22
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Correct Position Of The Bleed Hole In The Fuel Line Adapter{1252}
1986/04/21
Use Correct Compression Seal Washer (Gas Seal) On 7000 Series Fuel Injection Nozzles{1254,1250}
1986/09/29
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
Drains In New Fuel Injection Pump Housing And Governor Housing Prevent Possible Corrosion And Freezing Damage{1286}
1977/03/07
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Water Separators Needed On Machines And Engines In The Field With SMFS{1250,0336}
1977/12/05
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Water Separator Element And Retaining Clamp Stops Fuel Leakage{1250}
1978/04/24
Water Separator Added To Give Protection To The Sleeve Metering Fuel System{1250}
1978/05/01
Do Not Use Plastic Tubing And Compression Fittings Without An Insert As A Fuel Supply Line{1274}
1978/06/26
Remove Fuel Injection Nozzles Before The Bottom Surface Of A Cylinder Head Is Cleaned{1254,1101}
1978/08/07
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
New 1U9139 Universal Fuel Line Pickup Available{0775}
1988/05/23
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
New Fuel Injection Nozzles Are Used In 3208 Engines{1254}
1979/03/05
New Larger Capacity Water Separator Is Available{1250}
1979/03/12
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Do Not Use Later 9N3979 Nozzle Assemblies In Plate Of Earlier Nozzle Assemblies{1254}
1979/05/21
New Washers For Injection Valve Nozzles Must Be Added To Valve Grinding Gasket Kit When Used With Later Engines{7555,1254}
1979/05/21
Test Specifications Now Available For 9N3979 And 9N2366 Pencil Type Fuel Nozzle Assemblies{0652,1254}
1979/06/11
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Bleed Screw Used On 7000 Series Fuel Injection Nozzles{1254}
1989/03/06
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
Compression Ratio Increased On Remanufactured OR1094 & OR1095 Engines To Reduce Amount Of White Smoke On Cold Weather Start-Ups{1000,1254,1290}
1991/09/30
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
New Fuel Priming Pump And Improved Gasket Used{1258}
1994/08/22
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Be Sure To Correctly Tighten 1R-0712, 1R-0740, 1R-0749, 1R-0750, 1R-0751, 1R-0753, And 1R-0759 Fuel Filter Assemblies {1261}
1998/01/26
New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES® Replace All Standard Fuel Filters In February Of 1999 {1261}
1999/04/12

Caterpillar Parts SIS Catalog 3208 :

CONTROL GP-GOVERNOR
9L-6743 CONTROL GP-GOVERNOR
SHUT-OFF GP-ELECTRICAL
9N-0683 SHUT-OFF GP-ELECTRICAL
SOLENOID GP-SHUT-OFF
7N-8883 SOLENOID GP-SHUT-OFF
SOLENOID GP-SHUT-OFF
9N-1068 SOLENOID GP-SHUT-OFF
SOLENOID AS-SHUT-OFF
6N-3749 SOLENOID AS-SHUT-OFF
SHUT-OFF GP-SOLENOID
9N-1067 SHUT-OFF GP-SOLENOID
SHUT-OFF GP-ELECTRICAL
9N-0683 SHUT-OFF GP-ELECTRICAL
SHUT-OFF GP-ELECTRICAL
9N-0683 SHUT-OFF GP-ELECTRICAL
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
FUEL INJECTION LINES GROUP
4N-5873 FUEL INJECTION LINES GROUP
FUEL FILTER LINES GROUP
4N-5872 FUEL FILTER LINES GROUP
FUEL FILTER LINES GROUP
6N-1206 FUEL FILTER LINES GROUP
INJECTION GP-CETANE
9N-3771 INJECTION GP-CETANE
SEPARATOR GP-WATER
7N-0950 SEPARATOR GP-WATER
FILTER GP-FUEL
4N-5868 FILTER GP-FUEL

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.