AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3306 TRUCK ENGINE 76R00371-02778 BASIC ENGINE Caterpillar SIS



TRUCK ENGINE 3306 TRUCK ENGINE 76R
 3306 TRUCK ENGINE 76R00371-02778 UEG0830S 3306 76R   (1978)

Parts group 3306:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR LINES GROUP
9L-5811 AIR COMPRESSOR LINES GROUP
9L5811 AIR COMPRESSOR LINES GROUP
Serial No. 76R371 to 76R2114 inclusive
LINES GP-AIR COMPRESSOR
9N-8080 LINES GP-AIR COMPRESSOR
9N8080 AIR COMPRESSOR LINES GROUP
Serial No. 76R2115 to 76R2441 inclusive
LINES GP-AIR COMPRESSOR
9N-8080 LINES GP-AIR COMPRESSOR
9N8080 AIR COMPRESSOR LINES GROUP
Serial No. 76R2442-Up
AIR COMPRESSOR GROUP
9L-5762 AIR COMPRESSOR GROUP
9L5762 AIR COMPRESSOR GROUP
2P1830 Air Compressor parts are shown on Page 73
AIR COMPRESSOR GP
9N-8069 AIR COMPRESSOR GP
9N8069 AIR COMPRESSOR GROUP
Serial No. 76R2115-Up
6N7582 Compressor parts are shown on Page 72D
AN ATTACHMENT
AIR COMPRESSOR GROUP
7N-7392 AIR COMPRESSOR GROUP
7N7392 AIR COMPRESSOR GROUP--Type 1
6N7582 Air Compressor parts are shown on Page 72D
Provides Field Replacement for 2P1830 shown on Page 73
AIR COMPRESSOR GROUP
7N-7392 AIR COMPRESSOR GROUP
7N7392 AIR COMPRESSOR GROUP--Type 2
6N7582 Air Compressor parts are shown on Page 72D
Provides Field Replacement for 2P1830 shown on Page 73
AIR COMPRESSOR GP
6N-7582 AIR COMPRESSOR GP
6N7582 AIR COMPRESSOR GROUP
Part of 9N8069 and 7N7392 Air Compressor Groups shown on Pages 72, 72A and 72C
AIR COMPRESSOR GROUP
2P-1830 AIR COMPRESSOR GROUP
2P1830 AIR COMPRESSOR GROUP
Part of 9L5762 Air Compressor Group shown on Page 72
CAMSHAFT GP
CAMSHAFT GP-SINGLE
2P-6202 CAMSHAFT GP-SINGLE
2P6202 CAMSHAFT GROUP
CRANKSHAFT GP
CRANKSHAFT GP
2P-6222 CRANKSHAFT GP
2P6222 CRANKSHAFT GROUP
Serial No. 76R371 to 76R389 inclusive. Part of 9L5837 Basic Engine
Arrangement listed on Page 12. Only separate parts serviced
SEAL GP-CRANKSHAFT
2P-6224 SEAL GP-CRANKSHAFT
2P6224 CRANKSHAFT SEAL GROUP
Part of 9L5837 Basic Engine Arrangement listed on Page 12
Only separate parts serviced
CRANKSHAFT GP
2P-6222 CRANKSHAFT GP
2P6222 CRANKSHAFT GROUP
Serial No. 76R390 to 76R1609 inclusive. Part of 9L5837 Basic Engine Arrangement
listed on Page 12. For Field Replacement of 4N7697 Crankshaft Assembly order
4N7693 shown on Page 16B
CRANKSHAFT GP
2P-6222 CRANKSHAFT GP
2P6222 CRANKSHAFT GROUP
Serial No. 76R1610-Up. Part of 9L5837 Basic Engine Arrangement listed on
Page 12. For Field Replacement of 4N7697 Crankshaft Assembly order 4N7693
shown on Page 16B
CRANKSHAFT AS
4N-7693 CRANKSHAFT AS
4N7693 CRANKSHAFT ASSEMBLY--Field Installation
Serial No. 76R390-Up
2P-1444 CRANKSHAFT BEARING REPLACEMENTS
2P1444 CRANKSHAFT BEARING REPLACEMENTS
Serial No. 76R371 to 76R389 inclusive
FOR USE WITH STANDARD CRANKSHAFT
2P-1445 CRANKSHAFT BEARING REPLACEMENTS
2P1445 CRANKSHAFT BEARING REPLACEMENTS
Serial No. 76R371 to 76R389 inclusive
FOR USE WITH .010 UNDERSUZE CRANKSHAFT
2P-1446 CRANKSHAFT BEARING REPLACEMENTS
2P1446 CRANKSHAFT BEARING REPLACEMENTS
Serial No. 76R371 to 76R389 inclusive
FOR USE WITH .020 UNDERSIZE CRANKSHAFT
2P-1447 CRANKSHAFT BEARING REPLACEMENTS
2P1447 CRANKSHAFT BEARING REPLACEMENTS
Serial No. 76R371 to 76R389 inclusive
FOR USE WITH .030 UNDERSIZE CRANKSHAFT
8S-3982 CRANKSHAFT BEARING REPLACEMENTS
8S3982 CRANKSHAFT BEARING REPLACEMENTS
Serial No. 76R390-Up
FOR USE WITH STANDARD CRANKSHAFT
8S-3983 CRANKSHAFT BEARING REPLACEMENTS
8S3983 CRANKSHAFT BEARING REPLACEMENTS
Serial No. 76R390-Up
FOR USE WITH .010 UNDERSIZE CRANKSHAFT
8S-3984 CRANKSHAFT BEARING REPLACEMENTS
8S3984 CRANKSHAFT BEARING REPLACEMENTS
Serial No. 76R390-Up
FOR USE WITH .020 UNDERSIZE CRANKSHAFT
8S-3985 CRANKSHAFT BEARING REPLACEMENTS
8S3985 CRANKSHAFT BEARING REPLACEMENTS
Serial No. 76R390-Up
FOR USE WITH .030 UNDERSIZE CRANKSHAFT
CRANKSHAFT SERVICE THRUST PLATE
CRANKSHAFT SERVICE THRUST PLATE--Field Installation
Provides a Thrust Plate to be used in the event a "Wide" Thrust Journal Crankshaft
is installed in a Spacer Plate Cylinder Block
CYLINDER BLOCK GP
COVER GP
2P-6256 COVER GP
2P6256 CYLINDER BLOCK COVER GROUP
Serial No. 76R371 to 76R1161 inclusive. Only separate parts serviced
Part of 9L5837 Basic Engine Arrangement listed on Page 12
CYLINDER BLOCK GP
2P-6560 CYLINDER BLOCK GP
2P6560 CYLINDER BLOCK GROUP
Only separate parts serviced. Part of 9L5837 Basic Engine Arrangement
listed on Page 12. See Page 17 for Gasket Kits
COVER GP
2P-6256 COVER GP
2P6256 CYLINDER BLOCK COVER GROUP
Serial No. 76R1162 to 76R1294 inclusive
COVER GP
4N-5163 COVER GP
4N5163 CYLINDER BLOCK COVER GROUP
Serial No. 76R1295-Up
CYLINDER BLOCK AS
2P-8776 CYLINDER BLOCK AS
2P8776 CYLINDER BLOCK ASSEMBLY
Part of 2P6560 Cylinder Block Group
For Field Replacement order 2P8776 plus 1--2P8782 Hardware Kit
FASTENER GP
9L-5766 FASTENER GP
9L5766 FRONT HOUSING FASTENER GROUP
CYLINDER HEAD GP
CYLINDER HEAD GP
9N-2382 CYLINDER HEAD GP
9N2382 CYLINDER HEAD GROUP
Serial No. 76R1295 to 76R1903 inclusive
4N7446 Head parts are shown on Page 20
CYLINDER HEAD GP
9N-2382 CYLINDER HEAD GP
9N2382 CYLINDER HEAD GROUP
Serial No. 76R1904-Up
6N8889 Cylinder Head parts are shown on Page 20A
CYLINDER HEAD GP
2P-6496 CYLINDER HEAD GP
2P6496 CYLINDER HEAD GROUP
Serial No. 76R371 to 76R1903 inclusive
4N7446 Cylinder Head parts are shown on Page 20
See Page 17 for Gasket Kits
CYLINDER HEAD GP
2P-6496 CYLINDER HEAD GP
2P6496 CYLINDER HEAD GROUP
Serial No. 76R1904-Up
6N8889 Head parts are shown on Page 20A
See Page 17 for Gasket Kits
CYLINDER HEAD AS
4N-7446 CYLINDER HEAD AS
4N7446 CYLINDER HEAD ASSEMBLY
Part of 9N2382 & 2P6496 Cylinder Head Groups shown on Pages 18B & 19
COVER GP-CYLINDER HEAD
9N-0136 COVER GP-CYLINDER HEAD
9N136 CYLINDER HEAD COVER GROUP
Part of 9L5837 Basic Engine Arrangement listed on Page 12
CYLINDER HEAD AS
6N-8889 CYLINDER HEAD AS
6N8889 CYLINDER HEAD ASSEMBLY
Serial No. 76R1904-Up
Part of 2P6496 Cylinder Head Group shown on Page 19A-1
FASTENER GP-CYLINDER HEAD
2P-6546 FASTENER GP-CYLINDER HEAD
2P6546 CYLINDER HEAD FASTENER GROUP
DAMPER GP
DAMPER GROUP
9L-5772 DAMPER GROUP
9L5772 DAMPER GROUP
Serial No. 76R371 to 76R1294 inclusive
DAMPER GP
9N-2345 DAMPER GP
9N2345 DAMPER GROUP
Serial No. 76R1295 to 76R1322 and 76R1918-Up
DAMPER GROUP
9N-2638 DAMPER GROUP
9N2638 DAMPER GROUP
Serial No. 76R1323 to 76R1917 inclusive
DRIVE GP-FAN
DRIVE GP-FAN
9L-5603 DRIVE GP-FAN
9L5603 FAN DRIVE GROUP
Serial No. 76R371 to 76R1294 inclusive
Available as an attachment from Serial No. 76R1295-Up
DRIVE GP-FAN
9L-5603 DRIVE GP-FAN
9L5603 FAN DRIVE GROUP
Serial No. 76R1295-Up
AN ATTACHMENT
DRIVE GP-FAN
9N-3244 DRIVE GP-FAN
9N3244 FAN DRIVE GROUP
AN ATTACHMENT
DRIVE GP-FAN
9N-5126 DRIVE GP-FAN
9N5126 FAN DRIVE GROUP
AN ATTACHMENT
DRIVE GP-FAN
9L-6094 DRIVE GP-FAN
9L6094 FAN DRIVE GROUP--Type 1
AN ATTACHMENT
DRIVE GP-FAN
9L-6094 DRIVE GP-FAN
9L6094 FAN DRIVE GROUP--Type 2
AN ATTACHMENT
DRIVE GP-FAN (BELT)
9N-1345 DRIVE GP-FAN (BELT)
9N1345 FAN DRIVE GROUP
AN ATTACHMENT
DRIVE GP-FAN (BELT)
9N-1345 DRIVE GP-FAN (BELT)
9N1345 FAN DRIVE GROUP--Type 2
AN ATTACHMENT
DRIVE GP-PUMP
DRIVE GP-PUMP
9L-5621 DRIVE GP-PUMP
9L5621 HYDRAULIC PUMP DRIVE GROUP
AN ATTACHMENT
DRIVE GP-PUMP
6N-9548 DRIVE GP-PUMP
6N9548 HYDRAULIC PUMP DRIVE GROUP
FOR USE WITH BORG WARNER SFR 20 PUMP WITH "C" SHAFT
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL ASSEMBLY
9L-6757 FLYWHEEL ASSEMBLY
9L6757 FLYWHEEL ASSEMBLY
FOR USE WITH LIPE 14 INCH DPB CLUTCH
Replaced by 9N2076 shown on Page 28B. AN ATTACHMENT
FLYWHEEL AS
9N-2076 FLYWHEEL AS
9N2076 FLYWHEEL ASSEMBLY
FOR USE WITH LIPE 14 INCH DPB CLUTCH AND SAE NO. 2 FLYWHEEL
HOUSING. Part of 9N2632 Flywheel Group. AN ATTACHMENT
FLYWHEEL GP
9N-2632 FLYWHEEL GP
9N2632 FLYWHEEL GROUP
AN ATTACHMENT
FLYWHEEL GP
9L-4380 FLYWHEEL GP
9L4380 FLYWHEEL GROUP
FLYWHEEL GROUP
9L-6734 FLYWHEEL GROUP
9L6734 FLYWHEEL GROUP
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING
Part of 9N1237, 9N1239 & 9L6801 Engine Arrangements listed
on Pages 10B, 10C & 11
FLYWHEEL GROUP
9N-1358 FLYWHEEL GROUP
9N1358 FLYWHEEL GROUP
Serial No. 76R1295-Up
FOR USE WITH SAE NO. 1 FLYWHEEL HOUSING AND 15.5 INCH
2 PLATE CLUTCH. AN ATTACHMENT
GEAR GP
GEAR GP-FRONT
9L-6675 GEAR GP-FRONT
9L6675 FRONT TIMING GEAR GROUP
Serial No. 76R371 to 76R2548 inclusive
GEAR GP-FRONT
9L-6675 GEAR GP-FRONT
9L6675 FRONT TIMING GEAR GROUP
Serial No. 76R2549-Up
HOUSING GP-FLYWHEEL
FLYWHEEL HOUSING GROUP
9N-0927 FLYWHEEL HOUSING GROUP
9N927 FLYWHEEL HOUSING GROUP--SAE No. 1
Serial No. 76R371 to 76R1294 inclusive
Part of 9L6801 Engine Arrangement listed on Page 11
FLYWHEEL HOUSING GROUP
9N-0927 FLYWHEEL HOUSING GROUP
9N927 FLYWHEEL HOUSING GROUP--SAE No. 1
Serial No. 76R1295-Up. Part of 9N1237, 9N1239 and 9L6801 Engine
Arrangements listed on Pages 10B, 10C and 11
FLYWHEEL HOUSING GROUP
3N-3276 FLYWHEEL HOUSING GROUP
3N3276 FLYWHEEL HOUSING GROUP--SAE No. 2
Serial No. 76R371 to 76R1294 inclusive
HOUSING GP-FLYWHEEL
6N-5233 HOUSING GP-FLYWHEEL
6N5233 FLYWHEEL HOUSING GROUP--SAE No. 2
Serial No. 76R1295-Up
HOUSING GP-FRONT
HOUSING GP-FRONT
2P-9641 HOUSING GP-FRONT
2P9641 FRONT HOUSING GROUP
COVER GP-FRONT HOUSING
2P-6529 COVER GP-FRONT HOUSING
2P6529 FRONT HOUSING COVER GROUP
LIFTING GP-ENGINE
LIFTING GP
1P-3840 LIFTING GP
1P3840 LIFTING EYE GROUP
Serial No. 76R371 to 76R1903 inclusive
LIFTING GP
6N-8326 LIFTING GP
6N8326 ENGINE LIFTING GROUP
Serial No. 76R1904-Up
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
9N-0547 SUPPORT GP-ENGINE
9N547 FRONT ENGINE SUPPORT GROUP
AN ATTACHMENT
TRUNNION GP-ENGINE
9L-5765 TRUNNION GP-ENGINE
9L5765 TRUNNION GROUP
SUPPORT GP-ENGINE
9N-0548 SUPPORT GP-ENGINE
9N548 REAR ENGINE SUPPORT GROUP
AN ATTACHMENT
SUPPORT GP-ENGINE
9N-2327 SUPPORT GP-ENGINE
9N2327 ENGINE SUPPORT GROUP
FOR USE WITH 9N927 FLYWHEEL HOUSING GROUP SHOWN ON
PAGES 28A & 28B. AN ATTACHMENT
PAN GP-OIL
PAN GP-OIL
9L-5797 PAN GP-OIL
9L5797 OIL PAN GROUP--Front Sump
PAN GP-OIL
9L-5842 PAN GP-OIL
9L5842 OIL PAN GROUP--Rear Sump
PAN GP-OIL
9N-2916 PAN GP-OIL
9N2916 OIL PAN GROUP--Rear Sump
PISTON & ROD GP
PISTON & ROD GP
2P-6272 PISTON & ROD GP
2P6272 CONNECTING ROD AND PISTON GROUP--6 Required
PISTON & ROD GP
9N-1291 PISTON & ROD GP
9N1291 CONNECTING ROD AND PISTON GROUP--6 Required
Serial No. 76R1295-Up
Part of 9N1236, 9N1237, 9N1238 & 9N1239 Engine Arrangements
listed on Pages 10A, 10B & 10C
PULLEY GP
CRANKSHAFT PULLEY GROUP
9L-5769 CRANKSHAFT PULLEY GROUP
9L5769 CRANKSHAFT PULLEY GROUP
Serial No. 76R371 to 76R1294 and 76R1323 to 76R1917 inclusive
PULLEY GP-CRANKSHAFT
9N-2346 PULLEY GP-CRANKSHAFT
9N2346 CRANKSHAFT PULLEY GROUP
Serial No. 76R1295 to 76R1322 and 76R1918-Up
PULLEY GP-FAN
8N-2111 PULLEY GP-FAN
8N2111 FAN PULLEY GROUP
AN ATTACHMENT
PULLEY GP-FAN
8N-2252 PULLEY GP-FAN
8N2252 FAN PULLEY GROUP
AN ATTACHMENT
VALVE MECHANISM GP
VALVE-MECHANISM GP
2P-6526 VALVE-MECHANISM GP
2P6526 VALVE MECHANISM GROUP
COVER GP-VALVE MECHANISM
2P-6516 COVER GP-VALVE MECHANISM
2P6516 VALVE MECHANISM COVER GROUP

Information:

(For parts list, see above)

General Service Information
Tu-Flo 300 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Specifications
Air Compressor<BR> (9L5366)
1673 DIESEL TRUCK ENGINE
Disassembly and Assembly
Air Compressor
3306 DIESEL TRUCK ENGINE
Air Compressor
1673 DIESEL TRUCK ENGINE
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
Specifications
V-Belt Tension Chart
3306 DIESEL TRUCK ENGINE
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Truck Engine News
New Tools Available To Change Brakesaver Control Valve Diaphragm
1985/09/01
Additional Parts Required For Installation Of C-336 &reg; Jacobs Engine Brake
1987/11/01
New Spacer Base Allows Use Of New Integral Valve Cover Seal{1107,1119,1120}
1999/07/01
Compression Brakes Should be Inspected Carefully During Repairs to the Cylinder Head and Valve Mechanism {1119}
2003/05/01
Special Instruction
Jake Brake Part Number Cross-Reference To Caterpillar Part Numbers{1119}
Jake Brake Part Number Cross-Reference To Caterpillar Part Numbers{1119}
Service Magazine
New Tools Available To Change BrakeSaver Control Valve Diaphragm {0600,1155}
1985/09/16
Additional Parts Required For Installation Of C-336 Jacobs&reg; Engine Brake{1119,1209,1210}
1987/11/23
Truck Engine News
New 8T2998 Lubricant Available
1986/02/01
Remanufactured Camshafts And Cam Kits Available For Parts Service
1990/12/01
Correction For Camshaft And Valve Seat Specifications
1992/06/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
Engine News
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Specifications
Camshaft
3306 DIESEL TRUCK ENGINE
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Disassembly and Assembly
Camshaft
3306 DIESEL TRUCK ENGINE
Camshaft Bearings
3306 DIESEL TRUCK ENGINE
Camshaft
1673 DIESEL TRUCK ENGINE
Camshaft Bearings
1673 DIESEL TRUCK ENGINE
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Additional Parts Required For Installation Of C-336 Jacobs&reg; Engine Brake{1119,1209,1210}
1987/11/23
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Truck Engine News
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
Inspection Marks On Bearings
1982/05/19
New Crankshaft Assemblies
1983/01/26
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
Remanufactured Undersize Crankshafts Are Available
1984/04/04
New Rear Crankshaft Seal Group Used
1984/06/27
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/05/01
A New Type of Main Bearing is Available {1203}
2004/09/01
New Connecting Rod and Main Bearings {1203, 1218, 1230}
2006/06/01
Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts
1980/03/12
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
New Seal For Crankshaft
1977/07/13
Use Viscous (Fluid) Type Crankshaft Vibration Damper In Place Of Rubber Type Damper
1977/09/28
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In the Seal Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
3306 DIESEL TRUCK ENGINE
Bearing Surface (Journal) For Main Bearings
3306 DIESEL TRUCK ENGINE
Bearing Surface (Journal) For Connecting Rods
3306 DIESEL TRUCK ENGINE
Crankshaft Pulley
3306 DIESEL TRUCK ENGINE
Crankshaft
1673 DIESEL TRUCK ENGINE
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3306 DIESEL TRUCK ENGINE
Crankshaft Main Bearings
3306 DIESEL TRUCK ENGINE
Crankshaft Rear Seal And Wear Sleeve
3306 DIESEL TRUCK ENGINE
Crankshaft
3306 DIESEL TRUCK ENGINE
Crankshaft Main Bearings
1673 DIESEL TRUCK ENGINE
Crankshaft Pulley And Hub
1673 DIESEL TRUCK ENGINE
Crankshaft Front Seal
1673 DIESEL TRUCK ENGINE
Crankshaft Front Seal Wear Sleeve
1673 DIESEL TRUCK ENGINE
Crankshaft Drive Gear
1673 DIESEL TRUCK ENGINE
Crankshaft Rear Seal
1673 DIESEL TRUCK ENGINE
Crankshaft Rear Seal Wear Sleeve
1673 DIESEL TRUCK ENGINE
Crankshaft
1673 DIESEL TRUCK ENGINE
Service Magazine
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts{1161}
1980/03/24
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
New Seal For Crankshaft{1161}
1977/07/04
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Use Viscous (Fluid) Type Crankshaft Vibration Damper In Place Of Rubber Type Damper{1205}
1977/09/19
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Crankshaft Damper Assembly For 3306 Vehicular Engines Gives Longer Service Life{1205}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Correct Installation Of Crankshaft Thrust Plates Is Very Important To Prevent Engine Damage{1203}
1978/09/11
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Truck Engine News
Inspection Marks On Bearings
1982/05/19
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75 ' Bore Cylinder Blocks
1990/11/01
Remanufactured Camshafts And Cam Kits Available For Parts Service
1990/12/01
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/05/01
Cylinder Pack Puller Groups Improved
1992/12/01
Engine News
New Flywheel Housing Corrects Clearance Problem With Cylinder Block
1979/05/23
Oil Drain Hole Added To Spacer Plate Cylinder Block To Permit Use Of Scroll Fuel System
1980/02/06
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design
1980/03/12
Boss Can Be Removed From Spacer Plate Cylinder Block To Get Clearance For Oil Filler Tube
1980/05/14
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Grind Material From Boss On Parts Service Cylinder Block To Give Clearance For Starting Motor Mounting Bolt
1978/07/05
Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 6N8124 And 6N8127 Cylinder Block Assemblies{1201}
Installation Of 6N8124 And 6N8127 Cylinder Block Assemblies{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Installation Of The 0R-3611 Cylinder Block {1201}
Installation Of The 0R-3611 Cylinder Block {1201}
Installation Of The 0R-2554 Cylinder Block And The 0R-3258 Cylinder Block {1201}
Installation Of The 0R-2554 Cylinder Block And The 0R-3258 Cylinder Block {1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Block<BR> (Counterbored Block)
3306 DIESEL TRUCK ENGINE
Cylinder Block<BR> (With Spacer Plate)
3306 DIESEL TRUCK ENGINE
Cylinder Liner
3306 DIESEL TRUCK ENGINE
Cylinder Liner Projection<BR> (With Spacer Plate)
3306 DIESEL TRUCK ENGINE
Cylinder Liner Projection<BR> (Counterbored Block)
3306 DIESEL TRUCK ENGINE
Bearing Surface (Journal) For Main Bearings
3306 DIESEL TRUCK ENGINE
Main Bearings And Connecting Rod Bearings
3306 DIESEL TRUCK ENGINE
Cylinder Block
1673 DIESEL TRUCK ENGINE
Cylinder Liner
1673 DIESEL TRUCK ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Disassembly and Assembly
Crankshaft Main Bearings
3306 DIESEL TRUCK ENGINE
Rocker Shaft And Push Rods (Spacer Plate)
3306 DIESEL TRUCK ENGINE
Rocker Shaft (Spacer Plate)
3306 DIESEL TRUCK ENGINE
Cylinder Head (Spacer Plate)
3306 DIESEL TRUCK ENGINE
Spacer Plate
3306 DIESEL TRUCK ENGINE
Cylinder Liners
3306 DIESEL TRUCK ENGINE
Cylinder Liners (Spacer Plate)
3306 DIESEL TRUCK ENGINE
Camshaft Bearings
3306 DIESEL TRUCK ENGINE
Crankshaft Main Bearings
1673 DIESEL TRUCK ENGINE
Cylinder Liners
1673 DIESEL TRUCK ENGINE
Camshaft Bearings
1673 DIESEL TRUCK ENGINE
Service Magazine
Oil Drain Hole Added To Spacer Plate Cylinder Block To Permit Use Of Scroll Fuel System{1201,1221}
1980/01/28
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Boss Can Be Removed From Spacer Plate Cylinder Block To Get Clearance For Oil Filler Tube{1201,1316}
1980/05/12
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Correct Installation Of Crankshaft Thrust Plates Is Very Important To Prevent Engine Damage{1203}
1978/09/11
New Flywheel Housing Corrects Clearance Problem With Cylinder Block{1157,1158,1201,1453}
1979/05/21
How To Prevent Cylinder Block Failure From Cracks{1201}
1979/05/21
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Truck Engine News
Separate Valve Stem Gauges Available
1982/06/23
Engine Valve Stem &quot;use Again &quot; Specifications
1983/03/02
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control
1983/10/05
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
Bleed Holes On Parts Service Cylinder Heads
1985/02/01
Check For Interference Between Water Temperature Regulator And Cylinder Head Bore
1985/05/01
Use Correct Valves When Rebuilding Engines
1985/09/01
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines
1987/03/01
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads
1988/06/01
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads
1990/10/01
Correction For Camshaft And Valve Seat Specifications
1992/06/01
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/10/01
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/01
Engine News
Recommended Repairs After Cylinder Head Gasket Failure {1101}
1999/11/01
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
New Glow Plug Wiring Harness Prevents Short Circuit
1978/08/16
New Torque Specification Used On Bolts That Hold The Cylinder Head
1978/08/30
New Exhaust Valve Has Improved Three-Piece Construction
1978/12/13
Special Instruction
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-CFEL
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-CSARL
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Americas
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Specifications
Valves
3306 DIESEL TRUCK ENGINE
Cylinder Head
3306 DIESEL TRUCK ENGINE
Cylinder Head
1673 DIESEL TRUCK ENGINE
Valves
1673 DIESEL TRUCK ENGINE
Valve Guide And Seat Inserts
1673 DIESEL TRUCK ENGINE
Service Letter-China
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Cylinder Head Gasket Failures On Certain 3306 And 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Disassembly and Assembly
Precombustion Chambers
3306 DIESEL TRUCK ENGINE
Cylinder Head
3306 DIESEL TRUCK ENGINE
Cylinder Head (Spacer Plate)
3306 DIESEL TRUCK ENGINE
Valves
3306 DIESEL TRUCK ENGINE
Valve Seat Inserts
3306 DIESEL TRUCK ENGINE
Water Directors
3306 DIESEL TRUCK ENGINE
Valve Guides
3306 DIESEL TRUCK ENGINE
Precombustion Chambers
1673 DIESEL TRUCK ENGINE
Cylinder Head Assembly
1673 DIESEL TRUCK ENGINE
Cylinder Head
1673 DIESEL TRUCK ENGINE
Valves
1673 DIESEL TRUCK ENGINE
Valve Seat Inserts
1673 DIESEL TRUCK ENGINE
Valve Guides
1673 DIESEL TRUCK ENGINE
Service Magazine
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Special Studs And Nuts Available For Exhaust Manifolds On Engines Used In Heavy Load Conditions{1059,1101}
1981/03/09
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control{1109}
1983/09/26
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Check For Interference Between Water Temperature Regulator And Cylinder Head Bore{1355}
1985/05/13
Use Correct Valves When Rebuilding Engines{1105,1103}
1985/09/02
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Crankshaft Seal Usage On 3300 Family of Engines{1160,1161}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Torque Specification Used On Bolts That Hold The Cylinder Head{1101}
1978/09/04
New Exhaust Valve Has Improved Three-Piece Construction{1105}
1978/12/04
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/14
Engine News
Use Viscous (Fluid) Type Crankshaft Vibration Damper In Place Of Rubber Type Damper
1977/09/28
Specifications
Crankshaft Pulley
3306 DIESEL TRUCK ENGINE
Disassembly and Assembly
Vibration Damper And Pulley
3306 DIESEL TRUCK ENGINE
Crankshaft Pulley And Hub
1673 DIESEL TRUCK ENGINE
Service Magazine
Use Viscous (Fluid) Type Crankshaft Vibration Damper In Place Of Rubber Type Damper{1205}
1977/09/19
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
New Crankshaft Damper Assembly For 3306 Vehicular Engines Gives Longer Service Life{1205}
1978/06/12
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Disassembly and Assembly
Accessory Drive Shaft
1673 DIESEL TRUCK ENGINE
Service Magazine
New Gasket Used In Front Housing Group{1166,1162,1151}
1981/06/29
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
Disassembly and Assembly
Accessory Drive Shaft
1673 DIESEL TRUCK ENGINE
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Disassembly and Assembly
Fan Drive
3306 DIESEL TRUCK ENGINE
Fan Drive
1673 DIESEL TRUCK ENGINE
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Truck Engine News
Spring Pins No Longer Used In Water Pump Drive Gear
1981/09/23
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/12/08
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups
1993/06/01
New Remanufactured Water Pump Groups Include Cast Iron Impellers{1361}
1997/01/27
Engine News
New Remanufactured Water Pump Groups Include Cast Iron Impellers{1361}
1997/01/22
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Installing 3S6610 Water Pump Cage{1361}
Installing 3S6610 Water Pump Cage{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Water Pump
3306 DIESEL TRUCK ENGINE
Fuel Pump Drive Gear And Automatic Timing Advance
3306 DIESEL TRUCK ENGINE
Water Pump
1673 DIESEL TRUCK ENGINE
Hydraulic Pump Drive
1673 DIESEL TRUCK ENGINE
Service Magazine
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps{1361}
1977/06/27
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Gives More Pressure{1361}
1978/09/04
New Rear Cover And Gasket Used On Water Pump{1361,1350}
1979/08/20
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Installing 3S6610 Water Pump Cage{1361}
Installing 3S6610 Water Pump Cage{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps{1361}
1977/06/27
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Gives More Pressure{1361}
1978/09/04
New Rear Cover And Gasket Used On Water Pump{1361,1350}
1979/08/20
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Instructions For 3306 PC Engine Tune-Up{1000}
Instructions For 3306 PC Engine Tune-Up{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Correct Installation Of Crankshaft Thrust Plates Is Very Important To Prevent Engine Damage{1203}
1978/09/11
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Truck Engine News
New Flywheel Assemblies Used In With Rear PTO Arrangements
1988/10/01
Engine News
New Flywheel Housing Corrects Clearance Problem With Cylinder Block
1979/05/23
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Specifications
Flywheel Ring Gear
3306 DIESEL TRUCK ENGINE
Flywheel Housing Tightening
3306 DIESEL TRUCK ENGINE
Flywheel Runout
3306 DIESEL TRUCK ENGINE
Flywheel Housing Runout
3306 DIESEL TRUCK ENGINE
Flywheel Housing Bore
3306 DIESEL TRUCK ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Disassembly and Assembly
Flywheel
3306 DIESEL TRUCK ENGINE
Flywheel Housing
3306 DIESEL TRUCK ENGINE
Crankshaft Drive Gear
1673 DIESEL TRUCK ENGINE
Flywheel
1673 DIESEL TRUCK ENGINE
Flywheel Housing
1673 DIESEL TRUCK ENGINE
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
New Flywheel Housing Corrects Clearance Problem With Cylinder Block{1157,1158,1201,1453}
1979/05/21
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Truck Engine News
New Flywheel Assemblies Used In With Rear PTO Arrangements
1988/10/01
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups
1993/06/01
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque
1993/06/01
Engine News
New Front Housing Has Stronger Boss For Alternator
1977/10/12
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Specifications
Timing Gears
3306 DIESEL TRUCK ENGINE
Timing Gears
1673 DIESEL TRUCK ENGINE
Disassembly and Assembly
Timing Gear Cover
3306 DIESEL TRUCK ENGINE
Timing Gears And Plate
3306 DIESEL TRUCK ENGINE
Timing Gear Cover
1673 DIESEL TRUCK ENGINE
Timing Gears And Plate
1673 DIESEL TRUCK ENGINE
Crankshaft Drive Gear
1673 DIESEL TRUCK ENGINE
Service Magazine
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
New Gasket Used In Front Housing Group{1166,1162,1151}
1981/06/29
Washer, Seal Added To Improve Oil Filter Assembly{1306,1318}
1981/07/13
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Truck Engine News
New Rear Crankshaft Seal Group Used
1984/06/27
Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
New Flywheel Housing Corrects Clearance Problem With Cylinder Block
1979/05/23
New Rear Cover And Gasket Used On Water Pump
1979/08/22
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts
1980/03/12
Specifications
Flywheel Housing Tightening
3306 DIESEL TRUCK ENGINE
Flywheel Housing Runout
3306 DIESEL TRUCK ENGINE
Flywheel Housing Bore
3306 DIESEL TRUCK ENGINE
Disassembly and Assembly
Crankshaft Rear Seal And Wear Sleeve
3306 DIESEL TRUCK ENGINE
Flywheel Housing
3306 DIESEL TRUCK ENGINE
Crankshaft Rear Seal
1673 DIESEL TRUCK ENGINE
Crankshaft Rear Seal Wear Sleeve
1673 DIESEL TRUCK ENGINE
Flywheel Housing
1673 DIESEL TRUCK ENGINE
Service Magazine
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts{1161}
1980/03/24
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
New Flywheel Housing Corrects Clearance Problem With Cylinder Block{1157,1158,1201,1453}
1979/05/21
New Rear Cover And Gasket Used On Water Pump{1361,1350}
1979/08/20
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
Truck Engine News
New Front Housing Assembly And Gaskets Used
1981/02/04
New Gasket Used In Front Housing Group
1981/07/07
Front Trunnion Bolts May Come Loose
1990/10/01
Engine News
New Front Housing Has Stronger Boss For Alternator
1977/10/12
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3306 DIESEL TRUCK ENGINE
Timing Gear Cover
3306 DIESEL TRUCK ENGINE
Timing Gears And Plate
3306 DIESEL TRUCK ENGINE
Crankshaft Front Seal
1673 DIESEL TRUCK ENGINE
Crankshaft Front Seal Wear Sleeve
1673 DIESEL TRUCK ENGINE
Timing Gear Cover
1673 DIESEL TRUCK ENGINE
Timing Gears And Plate
1673 DIESEL TRUCK ENGINE
Service Magazine
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
New Gasket Used In Front Housing Group{1166,1162,1151}
1981/06/29
Washer, Seal Added To Improve Oil Filter Assembly{1306,1318}
1981/07/13
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
Front Trunnion Bolts May Come Loose {1153,1154}
1990/10/22
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Truck Engine News
Spring Pins No Longer Used In Water Pump Drive Gear
1981/09/23
Use 6V6035 Hardness Tester On Crankshafts
1982/03/31
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Inspection Marks On Bearings
1982/05/19
Separate Valve Stem Gauges Available
1982/06/23
Engine Slobbering; New Piston And Rings Used
1982/10/27
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08
New Crankshaft Assemblies
1983/01/26
Engine Valve Stem &quot;use Again &quot; Specifications
1983/03/02
New Piston Ring Group Used
1983/06/29
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control
1983/10/05
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23
Reuse Of Engine Bearings
1983/12/21
Crankshaft Failures
1983/12/21
Bleed Holes On Parts Service Cylinder Heads
1985/02/01
Check For Interference Between Water Temperature Regulator And Cylinder Head Bore
1985/05/01
Use Correct Valves When Rebuilding Engines
1985/09/01
New Tools Available To Change Brakesaver Control Valve Diaphragm
1985/09/01
New 8T2998 Lubricant Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Engine Timing Indicator Group Available
1986/07/01
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines
1987/03/01
Additional Parts Required For Installation Of C-336 &reg; Jacobs Engine Brake
1987/11/01
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads
1988/06/01
New Oil Control Piston Ring Used In 3306, 3306B Truck Engines
1990/04/01
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts
1991/01/01
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly
1991/04/01
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service
1991/05/01
Cylinder Pack Puller Groups Improved
1992/12/01
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups
1993/06/01
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque
1993/06/01
Engine News
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed
1979/06/06
New Rear Cover And Gasket Used On Water Pump
1979/08/22
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication
1979/08/22
Oil Drain Hole Added To Spacer Plate Cylinder Block To Permit Use Of Scroll Fuel System
1980/02/06
New Piston Groups Have The Piston Pin Bore Off-Center, Away From The Thrust Side Of The Piston
1980/02/27
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design
1980/03/12
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts
1980/03/12
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores
1980/08/13
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Use Viscous (Fluid) Type Crankshaft Vibration Damper In Place Of Rubber Type Damper
1977/09/28
New Front Housing Has Stronger Boss For Alternator
1977/10/12
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings
1977/11/30
Tolerance Added To Valve Clearance Specifications
1978/01/18
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Grind Material From Boss On Parts Service Cylinder Block To Give Clearance For Starting Motor Mounting Bolt
1978/07/05
Change In Procedure To Check Main Bearing Clearance
1978/08/30
New Torque Specification Used On Bolts That Hold The Cylinder Head
1978/08/30
New Exhaust Valve Has Improved Three-Piece Construction
1978/12/13
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of 6N8124 And 6N8127 Cylinder Block Assemblies{1201}
Installation Of 6N8124 And 6N8127 Cylinder Block Assemblies{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-CFEL
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-CSARL
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Americas
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Specifications
Valve Guide And Seat Inserts
1673 DIESEL TRUCK ENGINE
Timing Gears
1673 DIESEL TRUCK ENGINE
Valve Rocker Arms And Lifters
1673 DIESEL TRUCK ENGINE
Piston Rings
1673 DIESEL TRUCK ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Asia
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-APD
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Product Support Program For Replacing The Camshaft On Certain 3306 and 3306B Truck Engines
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Disassembly and Assembly
Oil Pan
1673 DIESEL TRUCK ENGINE
Water Pump
1673 DIESEL TRUCK ENGINE
Fan Drive
1673 DIESEL TRUCK ENGINE
Crankshaft Pulley And Hub
1673 DIESEL TRUCK ENGINE
Timing Gear Cover
1673 DIESEL TRUCK ENGINE
Accessory Drive Shaft
1673 DIESEL TRUCK ENGINE
Timing Gears And Plate
1673 DIESEL TRUCK ENGINE
Rocker Shaft Assembly And Push Rods
1673 DIESEL TRUCK ENGINE
Valve Lifters
1673 DIESEL TRUCK ENGINE
Valve Guides
1673 DIESEL TRUCK ENGINE
Pistons
1673 DIESEL TRUCK ENGINE
Cylinder Liners
1673 DIESEL TRUCK ENGINE
Flywheel Housing
1673 DIESEL TRUCK ENGINE
Service Magazine
New Piston Groups Have The Piston Pin Bore Off-Center, Away From The Thrust Side Of The Piston{1214}
1980/01/21
Oil Drain Hole Added To Spacer Plate Cylinder Block To Permit Use Of Scroll Fuel System{1201,1221}
1980/01/28
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts{1161}
1980/03/24
Boss Can Be Removed From Spacer Plate Cylinder Block To Get Clearance For Oil Filler Tube{1201,1316}
1980/05/12
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
Special Studs And Nuts Available For Exhaust Manifolds On Engines Used In Heavy Load Conditions{1059,1101}
1981/03/09
New Gasket Used In Front Housing Group{1166,1162,1151}
1981/06/29
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Piston Ring Group Used{1215}
1983/05/30
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control{1109}
1983/09/26
New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Additional Remanufactured Water Pumps Available{1361}
1983/10/31
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Improved Shut-Off Solenoids For Engines Equipped With Sleeve Metering Fuel Systems{1259}
1977/03/07
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps{1361}
1977/06/27
New Seal For Crankshaft{1161}
1977/07/04
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Use Viscous (Fluid) Type Crankshaft Vibration Damper In Place Of Rubber Type Damper{1205}
1977/09/19
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
Additional Parts Required For Installation Of C-336 Jacobs&reg; Engine Brake{1119,1209,1210}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Crankshaft Damper Assembly For 3306 Vehicular Engines Gives Longer Service Life{1205}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Torque Specification Used On Bolts That Hold The Cylinder Head{1101}
1978/09/04
New Water Pump Gives More Pressure{1361}
1978/09/04
Correct Installation Of Crankshaft Thrust Plates Is Very Important To Prevent Engine Damage{1203}
1978/09/11
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
New Flywheel Housing Corrects Clearance Problem With Cylinder Block{1157,1158,1201,1453}
1979/05/21
How To Prevent Cylinder Block Failure From Cracks{1201}
1979/05/21
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
New Rear Cover And Gasket Used On Water Pump{1361,1350}
1979/08/20
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Front Trunnion Bolts May Come Loose {1153,1154}
1990/10/22
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/04/15
Oversize Main Bearings Used In Remanufactured Engines Are Also Available For Parts Service{1203}
1991/05/06
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Improved Alternator Groups Now Available{1405}
1998/05/04
Truck Engine News
Front Trunnion Bolts May Come Loose
1990/10/01
Disassembly and Assembly
Engine Front Support
3306 DIESEL TRUCK ENGINE
Engine Front Support
1673 DIESEL TRUCK ENGINE
Service Magazine
6V3100 Diesel Timing Indicator Group Available To Check Engine/Fuel System Timing And Mechanical Advance During Operation{0653,1206,1156}
1981/08/31
Front Trunnion Bolts May Come Loose {1153,1154}
1990/10/22
0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29
Technical Information Bulletin
3306 Engine Oil Pan Plate Leaks
3306 Engine Oil Pan Plate Leaks
Disassembly and Assembly
Oil Pan
3306 DIESEL TRUCK ENGINE
Oil Pan
1673 DIESEL TRUCK ENGINE
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Truck Engine News
Inspection Marks On Bearings
1982/05/19
Engine Slobbering; New Piston And Rings Used
1982/10/27
Use 6V6147 Polishing Wheel To Clean Piston Pins
1982/12/08
New Piston Ring Group Used
1983/06/29
Reuse Of Engine Bearings
1983/12/21
Remanufactured Connecting Rod Assemblies
1984/02/15
Increase Piston Reuse With Keystone Piston Ring Gage Group
1986/07/01
Check Connecting Rods After Engine Failures Involving Hydraulic Lock
1986/11/01
New Oil Control Piston Ring Used In 3306, 3306B Truck Engines
1990/04/01
Cylinder Pack Puller Groups Improved
1992/12/01
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/11/01
New Guidelines for Inspecting Pistons {1214}
2006/01/01
New Connecting Rod and Main Bearings {1203, 1218, 1230}
2006/06/01
Engine News
New Piston Groups Have The Piston Pin Bore Off-Center, Away From The Thrust Side Of The Piston
1980/02/27
In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores
1980/08/13
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Specifications
Pistons And Rings<BR> (With Keystone Piston Ring Groove)
3306 DIESEL TRUCK ENGINE
Pistons And Rings
3306 DIESEL TRUCK ENGINE
Connecting Rod
3306 DIESEL TRUCK ENGINE
Bearing Surface (Journal) For Connecting Rods
3306 DIESEL TRUCK ENGINE
Main Bearings And Connecting Rod Bearings
3306 DIESEL TRUCK ENGINE
Piston Rings
1673 DIESEL TRUCK ENGINE
Connecting Rod
1673 DIESEL TRUCK ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Connecting Rod Bearings
3306 DIESEL TRUCK ENGINE
Pistons
3306 DIESEL TRUCK ENGINE
Connecting Rod Bearings
1673 DIESEL TRUCK ENGINE
Pistons
1673 DIESEL TRUCK ENGINE
Service Magazine
New Piston Groups Have The Piston Pin Bore Off-Center, Away From The Thrust Side Of The Piston{1214}
1980/01/21
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores{1213,1214}
1980/08/11
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
New Piston Ring Group Used{1215}
1983/05/30
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Improved Piston Pins Are Made Of Different Material For Better Hardness Characteristics When Heat Treated{1214}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Verification of Connecting Rod Eye Bushing Retention When Overhauling Engines{1218}
1994/10/31
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Engine News
Use Viscous (Fluid) Type Crankshaft Vibration Damper In Place Of Rubber Type Damper
1977/09/28
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Specifications
Crankshaft Pulley
3306 DIESEL TRUCK ENGINE
Disassembly and Assembly
Fan Drive
3306 DIESEL TRUCK ENGINE
Vibration Damper And Pulley
3306 DIESEL TRUCK ENGINE
Fan Drive
1673 DIESEL TRUCK ENGINE
Crankshaft Pulley And Hub
1673 DIESEL TRUCK ENGINE
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Use Viscous (Fluid) Type Crankshaft Vibration Damper In Place Of Rubber Type Damper{1205}
1977/09/19
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
New Crankshaft Damper Assembly For 3306 Vehicular Engines Gives Longer Service Life{1205}
1978/06/12
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Truck Engine News
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/19
Separate Valve Stem Gauges Available
1982/06/23
Make Change To 6V2100 Multitach And 5P9698 Calibrator
1982/12/08
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08
New Tools Available To Change Brakesaver Control Valve Diaphragm
1985/09/01
New Engine Timing Indicator Group Available
1986/07/01
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity
1986/11/01
Cylinder Pack Puller Groups Improved
1992/12/01
Special Instruction
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Troubleshooting And Repair Of The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement<SUP><FONT SIZE=-1>*</FONT></SUP>{0781, 0782}
Using The 5P2160 Engine Horsepower Meter Arrangement*{0781, 0782}
Using The 4S6553 Engine Evaluation Test Group{0781}
Using The 4S6553 Engine Evaluation Test Group{0781}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Dynamometer Test Specifications For Caterpillar Engines{1000}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Service Information And Use of 6V3100 Engine Timing Indicator Group{0782}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Electronic Repair Of 6V3100 Diesel Engine Timing Indicator{0651, 1250}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Using the 1U5470 Engine Pressure Group{0781}
Using the 1U5470 Engine Pressure Group{0781}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Using the 4C6821 Injection Line Speed Pickup Group{0781}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
New Special Instruction For Troubleshooting 5P2150 Engine Horsepower Meter{0651,1250}
1977/01/17
Troubleshooting The Tachometer System Of The 4S6553 Engine Instrument Group{0651}
1977/10/10
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Extraction Tools For &quot;Live Oil Sampling&quot;{7770,0770,0781,0783,0784}
1988/04/18
Installation Of Valves For Live Oil Sampling{7770,0770,0781,0783,0784}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
6V117 And 6V2001 Bushings Used In 9S8140 Pressurizing Pump Group Are Available For Parts Service{0651}
1979/06/25
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Specifications
V-Belt Tension Chart
3306 DIESEL TRUCK ENGINE
Truck Engine News
New 8T2998 Lubricant Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly
1991/04/01
7S3161 Valve Lifter Has Three Different Designs
1991/10/01
New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking{1104,1105}
1998/05/01
New Valve Cover Seal Used{1107}
1998/05/01
Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01
New Spacer Base Allows Use Of New Integral Valve Cover Seal{1107,1119,1120}
1999/07/01
Engine News
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication
1979/08/22
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings
1977/11/30
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Special Instruction
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Service Letter-NACD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Valve Rocker Arms And Lifters
3306 DIESEL TRUCK ENGINE
Valve Cover
3306 DIESEL TRUCK ENGINE
Valve Rocker Arms And Lifters
1673 DIESEL TRUCK ENGINE
Valve Cover
1673 DIESEL TRUCK ENGINE
Service Letter-China
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Disassembly and Assembly
Valve Cover
3306 DIESEL TRUCK ENGINE
Rocker Shaft Assembly And Push Rods
3306 DIESEL TRUCK ENGINE
Rocker Shaft
3306 DIESEL TRUCK ENGINE
Valve Lifters
3306 DIESEL TRUCK ENGINE
Rocker Shaft And Push Rods (Spacer Plate)
3306 DIESEL TRUCK ENGINE
Rocker Shaft (Spacer Plate)
3306 DIESEL TRUCK ENGINE
Valve Cover
1673 DIESEL TRUCK ENGINE
Rocker Shaft Assembly And Push Rods
1673 DIESEL TRUCK ENGINE
Valve Lifters
1673 DIESEL TRUCK ENGINE
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control{1109}
1983/09/26
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Additional Parts Required For Installation Of C-336 Jacobs&reg; Engine Brake{1119,1209,1210}
1987/11/23
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/04/15
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23

Truck sale:

 
9,775 
Caterpillar 3306T, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
FINANZAUTO S.A.
Caterpillar 3306T, Stationary Generator Sets, Construction
35,500 
Caterpillar 3306T, Stationary Generator Sets, Construction
- Stationary Generator Sets
RING POWER CORP.
Caterpillar 3306, Stationary Generator Sets, Construction
8,185 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
TOROMONT POWER SYSTEMS
Caterpillar 3306, Stationary Generator Sets, Construction
41,500 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
 
35,000 
Caterpillar 3306, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.