AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

140G MOTOR GRADER 72V00001-00822 (MACHINE) BASIC ENGINE Caterpillar SIS



MOTOR GRADER 140G MOTOR GRADER 72V
 140G MOTOR GRADER 72V00001-00822 (MACHINE) UEG0854S 140G 72V   (1974)

Parts group 140G:

  For full view, you need register
BASIC ENGINE
DAMPER GP
DAMPER GP
1P-9579 DAMPER GP
1P9579 DAMPER GROUP
Part of 3P65 Refrigerant Compressor Arrangement listed on Page 269
AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
3P-0059 DRIVE GP-FAN
FAN BELT DRIVE (3P59 N/S)
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
6N-2802 SUPPORT GP-ENGINE
ENGINE SUPPORT (6N2802 N/S)
Serial No. 72V461-Up and 81V312-Up
BOLT GP-ENGINE MOUNTING
1P-9573 BOLT GP-ENGINE MOUNTING
ENGINE MOUNTING HARDWARE (1P9573 N/S)
PAN GP-OIL
OIL DRAIN EXTENSION GROUP
1P-9577 OIL DRAIN EXTENSION GROUP
1P9577 OIL DRAIN EXTENSION GROUP
Serial No. 72V1 to 72V763 inclusive and 81V1 to 81V370 inclusive
HOSE AS-OIL DRAIN EXTENSION
2P-0698 HOSE AS-OIL DRAIN EXTENSION
2P698 OIL DRAIN EXTENSION HOSE ASSEMBLY
Serial No. 72V764-Up and 81V371-Up
PULLEY GP
PULLEY
3P-0068 PULLEY
PULLEY (3P68 N/S)

Information:

(For parts list, see above)

General Service Information
Tu-Flo 300 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 400, 500, 1000 Compressors
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 501 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 600 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Tu-Flo 700 Compressor
AIR COMPRESSORS TU-FLO 300, 400, 500, 501, 600, 700 & 1000 C
Truck Engine News
A New Special Instruction , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/01
Special Instruction
Air Compressor Installation Instructions{1803}
Air Compressor Installation Instructions{1803}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Troubleshooting Compressed Air System Components and Performance{1803, 5500}
Specifications
Air Compressor
SINGLE CYLINDER AIR COMPRESSOR
Air Compressor Governor<BR> (Bendix Corp. 101654)
120G, 130G & 140G MOTOR GRADERS AIR SYSTEM AND BRAKES
Air Compressor Governor<BR> (Clayton Dewandre APSA4285E-W1)
120G, 130G & 140G MOTOR GRADERS AIR SYSTEM AND BRAKES
Air Compressor Governor<BR> 7N9195
120G & 130G & 140G MOTOR GRADERS AIR SYSTEM & BRAKES
Systems Operation
Systems Operation
SINGLE CYLINDER AIR COMPRESSOR
Testing and Adjusting
Testing And Adjusting
SINGLE CYLINDER AIR COMPRESSOR
Disassembly and Assembly
Head Assembly
SINGLE CYLINDER AIR COMPRESSOR
Piston And Rod
SINGLE CYLINDER AIR COMPRESSOR
Crankshaft
SINGLE CYLINDER AIR COMPRESSOR
Air Governor
SINGLE CYLINDER AIR COMPRESSOR
Air Compressor Governor
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Air Compressor
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Air Compressor Governor
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Air Compressor
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Air Compressor - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New Air Compressor Tube Assembly Is Easier To Install Or Remove{1803,5502}
1983/05/09
Improved Cylinder Head Assembly Used In Air Compressor{1065}
1977/03/07
A Different Air Compressor Will Be Used For A Period Of Time{1065}
1978/06/05
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
New Air Compressor And Hose Assembly Used{5505,1803}
1990/08/27
A New Special Instruction, REHS1428 , "Troubleshooting Compressed Air System Components and Performance" Is Available {1803, 5500}
2002/09/23
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Disassembly and Assembly
Balancer Shafts
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Balancer Shaft Bearings
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Balancer Shafts (3304)
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Balancer Shaft Bearings
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Engine Balancer Shaft - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Engine Balancer Shaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Specifications
Belt Tension Chart
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
V-Belt Tension Chart
3306 VEHICULAR ENGINE
Service Magazine
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Information that Improves the Service Life of the Remanufactured Air Conditioning Compressor {1357, 1358, 1397, 1802, 1805, 1809, 7320, 7342, 7343}
2008/03/10
Disassembly and Assembly
Compression Brake - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Compression Brake - Install
3304B and 3306B Engines for Caterpillar Built Machines
Compression Brake - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Compression Brake - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Special Instruction
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Service Letter-Truck/Ag/Marine
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Specifications
Camshaft
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Camshaft Bearings
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Camshaft
3306 VEHICULAR ENGINE
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REMOVING 0R3023 REMAN CAMSHAFT KITS FROM DEALER PARTS STOCK
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Disassembly and Assembly
Camshaft
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Camshaft Bearings
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Camshaft
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Camshaft Bearings
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Camshaft - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
C7
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C7
Engines for Caterpillar Built Machines
Camshaft - Remove
C7
Engines for Caterpillar Built Machines
Camshaft - Install
C7
Engines for Caterpillar Built Machines
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
New Camshaft Has Improved Wear Resistance{1210,1209}
1990/11/19
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/07/21
Avoid Overheating Of Rear Power Take Off Clutches{3055}
1982/05/24
Do Not Use Plastic Tubing With Brass Couplings As A Fuel Supply Line{1274}
1977/10/03
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Special Instruction
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Specifications
Crankshaft
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Bearing Surface (Journal) For Main Bearings
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Bearing Surface (Journal) For Connecting Rods
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Connecting Rod and Main Bearings
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Crankshaft Hub And Damper
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Crankshaft
3306 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3306 VEHICULAR ENGINE
Bearing Surface (Journal) For Connecting Rods
3306 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3306 VEHICULAR ENGINE
Crankshaft Hub And Damper
3306 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Crankshaft Hub
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft Front Seal And Wear Sleeve
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft Main Bearings
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft Rear Seal And Wear Sleeve
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft Hub (Later)
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Crankshaft Front Seal And Wear Sleeve
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Crankshaft Main Bearings
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Crankshaft Rear Seal And Wear Sleeve
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Crankshaft
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C7
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C7
Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
C7
Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C7
Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C7
Engines for Caterpillar Built Machines
Crankshaft - Remove
C7
Engines for Caterpillar Built Machines
Crankshaft - Install
C7
Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C7
Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts{1161}
1980/03/24
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
New Seal For Crankshaft{1161}
1977/07/04
Tools To Install Crankshaft Seal And Wear Sleeve{1160,1161,0622}
1977/07/11
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Crankshaft Damper Assembly For 3306 Vehicular Engines Gives Longer Service Life{1205}
1978/06/12
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Type of Main Bearing is Available {1203}
2004/09/27
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Procedure for Crankshafts that will not Rotate after Installation during a Rebuild {1000, 1202}
2008/09/08
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of 2P8774 And 2P8776 Cylinder Block Assemblies{1201}
Installation Of Service Replacement Thrust Plates{1203}
Installation Of Service Replacement Thrust Plates{1203}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Installation Of 0R2554 Remanufactured Short Block Group{1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-CFEL
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-CSARL
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Americas
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Brazil
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Truck/Ag/Marine
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Specifications
Cylinder Block
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Camshaft Bearings
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Cylinder Liner
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Cylinder Liner Projection
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Bearing Surface (Journal) For Main Bearings
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Connecting Rod and Main Bearings
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Cylinder Block
3306 VEHICULAR ENGINE
Cylinder Liner
3306 VEHICULAR ENGINE
Cylinder Liner Projection
3306 VEHICULAR ENGINE
Bearing Surface (Journal) For Main Bearings
3306 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3306 VEHICULAR ENGINE
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Disassembly and Assembly
Spacer Plate
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Camshaft Bearings
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Cylinder Liners
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft Main Bearings
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Piston Cooling Orifices
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Spacer Plate
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Camshaft Bearings
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Crankshaft Main Bearings
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Cylinder Liners
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Piston Cooling Orifices
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Cylinder Liner - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines
Spacer Plate - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Cylinder Liner - Install
3304B and 3306B Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C7
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C7
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C7
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Special Instruction
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
3306 Cylinder Head To Block Joint Repair Procedure{1124, 1101, 1201}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Service Letter-NACD
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Australia
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-CFEL
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-CSARL
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Americas
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Cylinder Head
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Valve Cover
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Valves (PC)
3306 VEHICULAR ENGINE
Valves (DI)
3306 VEHICULAR ENGINE
Cylinder Head
3306 VEHICULAR ENGINE
Valve Cover
3306 VEHICULAR ENGINE
Glow Plug Positioning<BR> (PC Engines)
3306 VEHICULAR ENGINE
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Service Letter-China
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Service Letter-Asia
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Service Letter-APD
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Cylinder Head Gasket Failures On Certain D6D, D6H, D7G, And D7H Tractors; 12G, 14G, And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966D And 966E Loaders; And 973 Loaders
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Product Support Program For Replacing The Camshaft On Certain D6H And D7H Tractors; 12G, 14G And 140G Motor Graders; D25C, D25D, D30C, D30D, D35C, D250B, D300B, D350C, And D350D Articulated Dump Trucks; Challenger 65 Tractors; 235C Excavators; 528 Skidders; 615C, 627E, And 637E Scrapers; 815B And 816B Compactors; 966E Loaders; 973 Loaders; And 3306 Industrial Engines
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Cylinder Head Gasket And Spacer Deck Gasket Replacement In Various Gasket Kits
Disassembly and Assembly
Cylinder Head
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Valves
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Valve Guides
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Valve Seat Inserts
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Water Directors
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Precombustion Chambers (Earlier)
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Cylinder Head (Earlier)
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Cylinder Head (Later)
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Valves
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Valve Seat Inserts
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Water Directors
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Valve Guides
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Inlet and Exhaust Valves - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Cylinder Head - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Cylinder Head - Install
3304B and 3306B Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C7
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C7
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C7
Engines for Caterpillar Built Machines
Unit Injector Sleeve - Remove
C7
Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
C7
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
C7
Engines for Caterpillar Built Machines
Cylinder Head - Remove
C7
Engines for Caterpillar Built Machines
Cylinder Head - Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1981/10/12
Vacuum Tester Checks For Leaks Between Valve Face and Seat{0651,1103,1105}
1982/09/06
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Check For Interference Between Water Temperature Regulator And Cylinder Head Bore{1355}
1985/05/13
Use Correct Valves When Rebuilding Engines{1105,1103}
1985/09/02
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Improved Cylinder Head Assembly Used In Air Compressor{1065}
1977/03/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Cylinder Head Water Directors No Longer Needed In Direct Injection Engines {1115}
1987/03/09
Salvage Of Cylinder Heads By Using Oversized Valve Guides And Valve Inserts {1104,1103}
1987/03/30
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
New Torque Specification Used On Bolts That Hold The Cylinder Head{1101}
1978/09/04
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Valve Rotator And New Oil Shield Are Available{1104,1105,1109}
1979/10/22
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
Correction For Camshaft And Valve Seat Specifications{1210,1103}
1992/07/20
New Valve Guide Available{1104}
1995/12/25
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
New Valve Cover Seal Used {1107}
1998/05/25
New Cast Iron Valve Guide And New Exhaust Valve With Chrome Plated Stem Will Help Prevent Early Hour Exhaust Valve Sticking In 3304 And 3306 Machine Engines {1104,1105}
1998/06/22
New Specification for Reusability of the Intake Valves and Exhaust Valves {1105}
2002/05/13
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Later Pre-Chamber Cylinder Heads On Early 3304 Engines Without Drilled Rocker Stands Are Used {1100}
2012/10/11
Specifications
Crankshaft Hub And Damper
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Crankshaft Hub And Damper
3306 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Vibration Damper
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft Hub
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Vibration Damper (Earlier)
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Crankshaft Hub (Later)
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Vibration Damper and Pulley - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
New Crankshaft Damper Assembly For 3306 Vehicular Engines Gives Longer Service Life{1205}
1978/06/12
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
Specifications
Drive For Hydraulic Pump
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Rear Accessory Drive Gears
3306 VEHICULAR ENGINE
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
Specifications
Rear Accessory Drive Gears
3306 VEHICULAR ENGINE
Service Magazine
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Specifications
Belt Tension Chart
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
V-Belt Tension Chart
3306 VEHICULAR ENGINE
Fan Drive
3306 VEHICULAR ENGINE
Disassembly and Assembly
Fan Drive And Support
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Fan Drive And Support
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Fan Drive
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Fan Drive Mounting Group - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Self Locking Bolts Now Used To Hold Fan Drive Pulley{1359}
1982/07/19
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Installing 3S6610 Water Pump Cage{1361}
Installing 3S6610 Water Pump Cage{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Elbow With Orifice Now Used In Regulator And Housing Groups For Cooling Systems{1355,1361}
1981/02/02
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10
Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps{1361}
1977/06/27
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Gives More Pressure{1361}
1978/09/04
New Rear Cover And Gasket Used On Water Pump{1361,1350}
1979/08/20
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/20
Special Instruction
Installation of Water Pump Seal Group{1361}
Installation of Water Pump Seal Group{1361}
Installing 3S6610 Water Pump Cage{1361}
Installing 3S6610 Water Pump Cage{1361}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Elbow With Orifice Now Used In Regulator And Housing Groups For Cooling Systems{1355,1361}
1981/02/02
Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps{1361}
1977/06/27
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool{1361,0622}
1978/02/13
New Water Pump Gives More Pressure{1361}
1978/09/04
New Rear Cover And Gasket Used On Water Pump{1361,1350}
1979/08/20
New Remanufactured Water Pump Groups Include Cast Iron Impellers {1361}
1997/01/20
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Troubleshooting Engine Vibration In Vehicular Equipment{1000}
Instructions For 3306 PC Engine Tune-Up{1000}
Instructions For 3306 PC Engine Tune-Up{1000}
Instructions For 3306 DI Engine Tune-Up{1000}
Instructions For 3306 DI Engine Tune-Up{1000}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Use of the 4C3502 Engine Repair Indicator Kit{0781, 1000}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Using The 5P6524 Engine Timing Indicator Group And 1P540 Flow Checking Tool Group{0782, 1000}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Installation Of Service Replacement Crankshaft For A 3304 Or 3306 Engine{1202}
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Analyzing A Major Engine Failure{1000}
1982/07/19
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Special Instruction
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Specifications
Flywheel
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Flywheel Housing
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Flywheel Runout
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Flywheel Housing Runout
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Flywheel Housing Bore
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Flywheel Ring Gear
3306 VEHICULAR ENGINE
Flywheel Housing
3306 VEHICULAR ENGINE
Flywheel Housing Tightening
3306 VEHICULAR ENGINE
Flywheel
3306 VEHICULAR ENGINE
Flywheel Housing
3306 VEHICULAR ENGINE
Flywheel Housing Bore
3306 VEHICULAR ENGINE
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Service Letter-APD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Disassembly and Assembly
Flywheel
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Flywheel Housing
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Flywheel
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Flywheel Housing
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Flywheel - Install
3304B and 3306B Engines for Caterpillar Built Machines
Flywheel - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Flywheel - Remove
C7
Engines for Caterpillar Built Machines
Flywheel - Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
New Ring Gears Used In Flywheel Assemblies{1158}
1979/04/30
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156}
Updated Flywheel Housing is Now Used on Certain C7 Powered Engines {1156}
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Specifications
Timing Gears
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Timing Gear Cover
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Timing Gears<BR> (Sleeve Metering Fuel System - PC &amp; DI)
3306 VEHICULAR ENGINE
Timing Gears<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE
Timing Gear Cover
3306 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Timing Gear Cover
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Timing Gears And Plate
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft Front Seal And Wear Sleeve
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Timing Gear Cover
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Timing Gears
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Timing Gear Plate
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Gear Group (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Gear Group (Front) - Install
3304B and 3306B Engines for Caterpillar Built Machines
Camshaft Idler Gear - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
New Ring Gears Used In Flywheel Assemblies{1158}
1979/04/30
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Special Instruction
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Installation Of 2W3422 Flywheel Housing As The Service Replacement For 8N5013 Flywheel Housing{1157}
Service Letter-NACD
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Specifications
Flywheel Housing
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Flywheel Housing Runout
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Flywheel Housing Bore
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Flywheel Housing
3306 VEHICULAR ENGINE
Flywheel Housing Tightening
3306 VEHICULAR ENGINE
Flywheel Housing
3306 VEHICULAR ENGINE
Flywheel Housing Bore
3306 VEHICULAR ENGINE
Service Letter-China
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Flywheel Housing
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft Rear Seal And Wear Sleeve
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Flywheel Housing
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Crankshaft Rear Seal And Wear Sleeve
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Flywheel Housing - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Flywheel Housing - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts{1161}
1980/03/24
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
New Rear Crankshaft Seal Group Used {1161}
1984/06/25
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Double Lip Seal With Hydrodynamic Grooves Used At Rear Of Crankshaft {1161,1200}
1987/09/28
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
New Rear Cover And Gasket Used On Water Pump{1361,1350}
1979/08/20
Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves {0653,1105}
1979/10/29
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Specifications
Timing Gear Cover
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Timing Gears<BR> (Sleeve Metering Fuel System - PC &amp; DI)
3306 VEHICULAR ENGINE
Timing Gears<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE
Timing Gear Cover
3306 VEHICULAR ENGINE
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Crankshaft Front Seal And Wear Sleeve
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Timing Gear Cover
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Timing Gears And Plate
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Crankshaft Front Seal And Wear Sleeve
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Timing Gear Cover
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Timing Gears
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Timing Gear Plate
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Housing (Front) - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Housing (Front) - Install
3304B and 3306B Engines for Caterpillar Built Machines
Front Cover - Remove and Install
C7
Engines for Caterpillar Built Machines
Housing (Front) - Remove
C7
Engines for Caterpillar Built Machines
Housing (Front) - Install
C7
Engines for Caterpillar Built Machines
Service Magazine
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
Lock Removed From Front Timing Gear Group To Help Prevent Loss Of Tightening Torque {1206}
1993/06/14
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Special Instruction
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Analyzing Cylinder Condition By Measuring Air Flow{0651, 1000}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of 1N3574 Or 1N3576 Cylinder Block Service Group (Spacer Plate) As A Replacement For The Former Counterbored Cylinder Block{1201}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
Service Letter-China
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-APD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Magazine
Spacer Plate Block Group Used For Parts Service Of Block Group With Counterbore Design{1101,1201}
1980/03/03
Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts{1161}
1980/03/24
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
New Front Housing Assembly And Gaskets Used{1162,1166,1151}
1980/12/01
Elbow With Orifice Now Used In Regulator And Housing Groups For Cooling Systems{1355,1361}
1981/02/02
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1981/10/12
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Engine Storage; Engine Start-Up After Storage{1000}
1982/02/22
Use 6V6035 Hardness Tester On Crankshafts{0651,1202}
1982/02/22
Correct Use Of 6V2023 Flow Check Adapter Group Is Important To Prevent Damage To An Engine{0651,0654,1250}
1982/03/22
Separate Valve Stem Gauges Available{0653,1000}
1982/06/07
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11
Reference Chart for Engine Improvements{0374,1000}
1982/10/25
New Crankshaft Assemblies{1202,1204,1206,1207,1212}
1982/11/01
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Water Pump Oil Seal Prevents Leaks{1361}
1983/10/10
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Crankshaft Failures{1202,1230}
1983/11/21
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Undersize Crankshafts Are Available{1202}
1983/11/21
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Improved Cylinder Heads And Valve Covers Used{1107,1101}
1984/09/10
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Remanufactured Crankshafts Are Available In Standard And Two Undersize Dimensions (U.S. and Canada){1202,7754}
1985/11/18
New Fuel Ratio Control Group Used On Engines Equipped With New Scroll Fuel System{1278}
1985/11/25
New 8T2998 Lubricant Available{0645,1210}
1986/02/17
New Index Lists Engine Special Instructions By SMCS Code{1000,0374}
1986/04/07
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Improved Cylinder Head Assembly Used In Air Compressor{1065}
1977/03/07
Tools To Remove Wear Sleeves From Crankshafts{0621,7558}
1977/04/18
Correct Rebuild Kits Must Be Used For Repair Of Earlier And Later Water Pumps{1361}
1977/06/27
New Seal For Crankshaft{1161}
1977/07/04
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
New Front Housing Has Stronger Boss For Alternator{1151}
1977/10/10
Crankshaft Support Groups Are Available To Measure Bent Crankshafts{0653,1202}
1977/11/07
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
The Caterpillar Fuel Flow Monitor System Available {0782,1000,1250}
1987/05/11
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Service Supports Available For Rear Of Engine{0701,0720,1000,3150}
1987/07/27
Single Lip Hydrodynamic Seal Used In Water Pumps{1300,1361}
1987/09/21
Microfiche For Replacement Engine Bills Of Material {0374,1000}
1987/10/26
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Explanation Of Nomenclature Used In Engine Performance{1000,0374}
1978/05/15
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Crankshaft Damper Assembly For 3306 Vehicular Engines Gives Longer Service Life{1205}
1978/06/12
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Torque Specification Used On Bolts That Hold The Cylinder Head{1101}
1978/09/04
New Water Pump Gives More Pressure{1361}
1978/09/04
Silicone Water Passage Seal Can Be Used Where Contact With Oil Is Unavoidable During Assembly Of Cylinder Heads{1100}
1988/06/06
New 6V87 Gauge Measures Valve Stem Wear{0653,1105}
1979/01/08
Current Chart For Dynamometer Adapters{0651,1000}
1979/01/22
Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines{1161}
1979/03/26
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Check Crankshaft Seals During Installation Of Engine Overhaul Gasket Kits; Add A Wear Sleeve When Needed{7555,7558,1161}
1979/06/04
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
New Specification For Installation Of Camshaft Front Bearing In Cylinder Block{1211}
1979/06/11
Improved Engine Design Uses Cylinder Block With Spacer Plate And New Crankshaft Thrust Plates{1000}
1979/07/02
New Rear Cover And Gasket Used On Water Pump{1361,1350}
1979/08/20
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters{0651,1254}
1979/09/03
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Use Only Stainless Steel Cylinder Liner Shims To Salvage Damaged 4.75&quot; Bore Cylinder Blocks{1201,1216,1217}
1990/11/19
New Camshaft Has Improved Wear Resistance{1210,1209}
1990/11/19
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
New Front Crankshaft Seal Used{1160,1202}
1991/02/18
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
7S3161 Valve Lifter Has Three Different Designs{1209}
1991/10/14
New Piston Body Assembly Available To Help Reduce White Smoke During Cold Weather Starts{1241}
1992/02/03
Be Sure To Use Correct Cup Plugs On 0R2077, 0R2554, And 0R3258 Remanufactured Short Blocks{1200,1201}
1992/11/23
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Specifications
Trunnion
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Trunnion
3306 VEHICULAR ENGINE
Engine Mounting Bolts
3306 VEHICULAR ENGINE
Disassembly and Assembly
Engine Front Support
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Service Magazine
Hardened Washers Now Used Between The Bolt Heads And The Engine Front Support To Keep These Bolts Tight{1153}
1977/02/28
Rear Engine Supports No Longer Standard Equipment{1154}
1987/05/25
0R5207 Remanufactured Starter May Not Fit In Some Applications{1453}
1993/11/29
Technical Information Bulletin
3306 Engine Oil Pan Plate Leaks
3306 Engine Oil Pan Plate Leaks
Specifications
Oil Pan<BR> (2P6152, 2P9647 &amp; 4N6057)
3306 VEHICULAR ENGINE
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Oil Pan
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Oil Pan Plate
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Oil Pan
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Oil Pan Plate
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Engine Oil Pan - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Engine Oil Pan - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Longer Ecology-Type Engine Oil Drain Plug Is Available{1302}
1995/06/12
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Special Instruction
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Use of Piston Pin Bearing Removal and Installation Tools{1218}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Piston Cleaning Procedure{1214}
Piston Cleaning Procedure{1214}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Using The 5P2050 Connecting Rod Checking Fixture{0767, 1218}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Connecting Rod Bearings
Connecting Rod Bearings
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Connecting Rods on Certain 3304 and 3306 Gas and Diesel Engines Have Failed{1225}
Specifications
Connecting Rod
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Pistons And Rings
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Bearing Surface (Journal) For Connecting Rods
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Connecting Rod and Main Bearings
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROLL FUEL
Pistons And Rings
3306 VEHICULAR ENGINE
Connecting Rod
3306 VEHICULAR ENGINE
Bearing Surface (Journal) For Connecting Rods
3306 VEHICULAR ENGINE
Main Bearings And Connecting Rod Bearings
3306 VEHICULAR ENGINE
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Disassembly and Assembly
Pistons And Connecting Rods
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Pistons
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Connecting Rod Bearings
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Connecting Rod Bearings
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Pistons
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Pistons (Later)
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Pistons (Earlier)
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Bearing Clearance - Check
3304B and 3306B Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
3304B and 3306B Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
3304B and 3306B Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C7
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C7
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C7
Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C7
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C7
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C7
Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C7
Engines for Caterpillar Built Machines
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores{1213,1214}
1980/08/11
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1981/10/12
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Bearing Standard: Quantity Of One Part Number Now Has Both Halves Of The Bearing{7551}
1982/08/09
Engine Slobbering; New Piston And Rings Used{1214,1215,1000,1225,1104,1052}
1982/10/11
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Use the 6V6167 Contact Point to Measure Wear Steps on Piston Pins{0653}
1982/11/22
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Remanufactured Connecting Rod Assemblies{1218}
1984/01/23
New Connecting Rod And Main Bearings Used{1230,1219,1203}
1984/03/26
Installing New Copper Bonded Bearings Can Extend Engine Life{1230,1203,1219}
1985/04/29
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Two Different Piston Oil Ring Designs Used{1215}
1985/11/11
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Increase Piston Reuse With Keystone Piston Ring Gauge Group{1214,1215}
1986/06/16
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
Check Connecting Rods After Engine Failures Involving Hydraulic Lock{1218,1225}
1986/10/20
Use Only Paint To Mark Connecting Rod Caps For Torque-Turn Method {1218,1219}
1987/06/01
Testing Connecting Rod Eye Bushings When Overhauling Engines{1218}
1987/07/06
Locating Bushings For The 5P3550 Rod Boring Machine Will Now Hold Tapered Piston Pin Bushings {0626}
1978/04/17
Use 6V100 Tool Arrangement To Remove And Install Piston Pin Bearings For Both Tapered And Standard Connecting Rods{0620,1218}
1978/04/24
Sleeve-Type Ring Compressors Can Be Used For Installation Of Pistons From The Bottom Of The Engine{0622}
1978/08/21
5P3519 Piston Ring Gauge Has Improved Design For Better Accuracy And Easier Use; Corrected Information For Use On Pistons That Have Two Ring Grooves{0653,1214}
1979/05/14
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Pin Bore Is Now Offset (Not In The Center) .059&quot; (1.5 mm) In The Piston To Stop Vibration Of The Cylinder Liners Which Can Cause Pitting On The Coolant Side Of The Cylinder Liners {1214,1216}
1979/09/10
New Connecting Rod Is Tapered In Piston Pin Area{1218}
1979/10/22
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Oil Control Piston Ring Used In 3300 Family Of Engines {1213,1214,1215}
1990/03/26
New Piston Body Assembly Available To Help Reduce White Smoke During Cold Weather Starts{1241}
1992/02/03
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Service Replacements For Discontinued Piston Pump Groups{5070}
1996/11/11
Piston Ring Groove Gauges To Quickly And Accurately Determine Reusability Of Pistons{1214,0763}
1997/01/13
New Fractured Connecting Rod is Now Available for Certain Engines {1218}
New Fractured Connecting Rod is Now Available for Certain Engines {1218}
New Guidelines for Inspecting Pistons {1214}
2006/01/02
A New Connecting Rod Bearing is Available {1219, 1225}
2008/12/29
A New Connecting Rod Bearing is Available {1218, 1219, 1225}
2009/02/09
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Check The Radiator Fan Spider Assembly When Doing Yearly General Maintenance{1356}
1989/07/24
Engine Coolant Can Be Recycled{1395}
1989/11/13
Avoid Overheating Of Rear Power Take Off Clutches{3055}
1982/05/24
Instrument Panel Guards Prevent Vandalism (Damage) To Machines{7315}
1982/09/20
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 342-8649 COOLING SYSTEM CONVERSION GROUP ON CERTAIN 140G AND 140H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 342-8649 COOLING SYSTEM CONVERSION GROUP ON CERTAIN 140G AND 140H MOTOR GRADERS
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C7
Engines for Caterpillar Built Machines
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Self Locking Bolts Now Used To Hold Fan Drive Pulley{1359}
1982/07/19
New Color Used For Fan Belt Tightener Spring{1358}
1984/06/04
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
New Crankshaft Damper Assembly For 3306 Vehicular Engines Gives Longer Service Life{1205}
1978/06/12
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Technical Information Bulletin
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Idler Stub Shaft Mounting Bolts; Idler Gear Sleeve Bearings
Tool Operating Manual
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Using The Inspection Borescopes 1U5268 and 8T9290 Borescopes
Service Magazine
6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings{1219,1218,1214}
1980/06/09
Piston And Connecting Rod Assembly Storage Cabinet{0600}
1982/01/18
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
Use 6V6147 Polishing Wheel To Clean Piston Pins{0675,1214}
1982/11/08
Make Change To 6V2100 Multitach And 5P9698 Calibrator{0651}
1982/11/15
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.