AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

140G MOTOR GRADER 72V00001-00822 (MACHINE) WORK TOOLS Caterpillar SIS



MOTOR GRADER 140G MOTOR GRADER 72V
 140G MOTOR GRADER 72V00001-00822 (MACHINE) UEG0854S 140G 72V   (1974)

Parts group 140G:

  For full view, you need register
WORK TOOLS
BLADE GP
BRACKET GP-BLADE
9D-6425 BRACKET GP-BLADE
9D6425 BLADE BRACKET GROUP--Type 1
Part of 9D6405 and 9D6430 Power Blade Arrangements listed on Page 240
AN ATTACHMENT
BRACKET GP-BLADE
9D-6425 BRACKET GP-BLADE
9D6425 BLADE BRACKET GROUP--Type 2
Part of 9D6405 and 9D6430 Power Blade Arrangements listed on Page 240
AN ATTACHMENT
BRACKET GP-BLADE
9D-6425 BRACKET GP-BLADE
9D6425 BLADE BRACKET GROUP--Type 3
Part of 9D6405 and 9D6430 Power Blade Arrangements listed on Page 240
AN ATTACHMENT
LIFT GP-BLADE
8D-5285 LIFT GP-BLADE
8D5285 BLADE LIFT GROUP--Part 1
8D-5285 LIFT GP-BLADE
8D5285 BLADE LIFT GROUP--Part 2
STABILIZER GP
9D-3855 STABILIZER GP
9D3855 STABILIZER GROUP
Part of 9D6985 and 9D6995 Blade Control Arrangements
listed on Pages 162 and 163
9D-6405 POWER BLADE AND TIP ARRANGEMENT
9D6405 POWER BLADE AND TIP ARRANGEMENT
12 FOOT--REPLACED BY 2G6318 LISTED ON PAGE 240B
AN ATTACHMENT
9D-6430 POWER BLADE AND TIP ARRANGEMENT
9D6430 POWER BLADE AND TIP ARRANGEMENT
14 FOOT--REPLACED BY 9D9920 LISTED ON PAGE 240A
AN ATTACHMENT
9D-6410 POWER BLADE AND TIP ARRANGEMENT
9D6410 POWER BLADE AND TIP ARRANGEMENT
12 FOOT-REPLACED BY 2G6323 LISTED ON PAGE 240B
AN ATTACHMENT
9D-6415 POWER BLADE AND TIP ARRANGEMENT
9D6415 POWER BLADE AND TIP ARRANGEMENT 14 FOOT--REPLACED BY 9D9910 LISTED ON PAGE 240A
AN ATTACHMENT
9D-9920 POWER BLADE AR
9D9920 POWER BLADE ARRANGEMENT--14 Ft.
AN ATTACHMENT
9D-9910 BLADE & TIP AR
9D9910 POWER BLADE AND TIP ARRANGEMENT--14 Ft.
AN ATTACHMENT
2G-6318 BLADE AR-POWER
2G6318 POWER BLADE ARRANGEMENT--12 FT.
AN ATTACHMENT
2G-6323 POWER BLADE & TIP AR
2G6323 POWER BLADE AND TIP ARRANGEMENT--12 FOOT
AN ATTACHMENT
BLADE GP
2G-6058 BLADE GP
2G6058 BLADE GROUP--12 Foot
Part of 2G6318 and 2G6323 Power Blade Arrangements listed on Page 240B
AN ATTACHMENT
BLADE GP
2G-6061 BLADE GP
2G6061 BLADE GROUP--12 Foot
Part of 2G6319 Automatic Blade Control Arrangement listed on Page 162A
AN ATTACHMENT
BLADE GP
9D-3380 BLADE GP
9D3380 BLADE GROUP--12 Foot
BLADE GROUP
9D-4752 BLADE GROUP
9D4752 BLADE GROUP--14 Foot
AN ATTACHMENT
BLADE GROUP
9D-6580 BLADE GROUP
9D6580 BLADE GROUP--12 Foot
Part of 9D6405 and 9D6410 Arrangements listed on Page 240
AN ATTACHMENT
BLADE GROUP
9D-4130 BLADE GROUP
9D4130 BLADE GROUP--14 Foot
Replaced by 9D9780 shown on Page 244A
Part of 9D6430 and 9D6415 Arrangements listed on Page 240. AN ATTACHMENT
BLADE GP
9D-9780 BLADE GP
9D9780 BLADE GROUP--14 Foot
Part of 9D9920 and 9D9910 Blade Arrangements listed on Page 240A
AN ATTACHMENT
BLADE GROUP
9D-2325 BLADE GROUP
9D2325 BLADE GROUP--12 Foot--Type 1
Part of 9D6985 Blade Control Arrangement listed on Page 162
AN ATTACHMENT
BLADE GROUP
9D-2325 BLADE GROUP
9D2325 BLADE GROUP--12 Foot--Type 2
Part of 9D6985 Blade Control Arrangement listed on Page 162
AN ATTACHMENT
BLADE GROUP
9D-2335 BLADE GROUP
9D2335 BLADE GROUP--14 Foot
Replaced by 9D9760 shown on Page 246A
Part of 9D6995 Blade Control Arrangement listed on Page 163. AN ATTACHMENT
BLADE GP
9D-9760 BLADE GP
9D9760 BLADE GROUP--14 Foot
Part of 9D9900 Blade Control Arrangement listed on Page 163A
AN ATTACHMENT
EXTENSION GP-BLADE
9D-4924 EXTENSION GP-BLADE
9D4924 BLADE EXTENSION GROUP--2 Foot--R.H.
AN ATTACHMENT
EXTENSION GP-BLADE
9D-4925 EXTENSION GP-BLADE
9D4925 BLADE EXTENSION GROUP--2 Foot--L.H.
AN ATTACHMENT
GROUND ENGAGING TOOLS (G.E.T.)
TOOTH GP-SCARIFIER
8J-1434 TOOTH GP-SCARIFIER
8J1434 TOOTH GROUP
Serial No. 26V1 to 26V867 inclusive
Also part of 8J7585 Basic Ripper Arrangement listed on Page 238
TOOTH GP-SCARIFIER
4K-3330 TOOTH GP-SCARIFIER
4K3330 RIPPER-SCARIFIER TOOTH GROUP--9 Teeth
Serial No. 26V1-Up. AN ATTACHMENT
TOOTH GP-SCARIFIER
8J-1434 TOOTH GP-SCARIFIER
8J1434 TOOTH GROUP
Serial No. 26V868-Up
Also part of 8J7585 Basic Ripper Arrangement listed on Page 238
7D-6674 CUTTING EDGE GROUP
7D6674 CUTTING EDGE GROUP--Curved
FOR USE WITH 12 FOOT BLADE
AN ATTACHMENT
7D-6675 CUTTING EDGE GROUP
7D6675 CUTTING EDGE GROUP--Curved
FOR USE WITH 14 FOOT BLADE
AN ATTACHMENT
6D-1827 BIT & CUTTING EDGE GP
6D1827 CUTTING EDGE AND END BIT GROUP--Curved
FOR USE WITH 14 FOOT BLADE
AN ATTACHMENT
6D-1837 BIT & CUTTING EDGE GP
6D1837 CUTTING EDGE AND END BIT GROUP--Curved
FOR USE WITH 12 FOOT BLADE
AN ATTACHMENT
7D-6671 BIT GP-END
7D6671 OVERLAY ENDBIT GROUP
FOR USE WITH CUTTING EDGES. AN ATTACHMENT
RIPPER GP
8J-7586 RIPPER AR
8J7586 RIPPER ARRANGEMENT
AN ATTACHMENT
MOUNTING GP-RIPPER
8J-6995 MOUNTING GP-RIPPER
8J6995 RIPPER MOUNTING GROUP
Part of 8J7586 Ripper Arrangement
RIPPER AR
8J-7585 RIPPER AR
8J7585 BASIC RIPPER ARRANGEMENT
Serial No. 26V1-Up
Part of 8J7586 Ripper Arrangement listed on Page 235
8J1434 Tooth parts are shown on Page 239
SCARIFIER GP
9D-5470 VEE SCARIFIER ARRANGEMENT
9D5470 VEE SCARIFIER ARRANGEMENT
AN ATTACHMENT
HYDRAULIC SCARIFIER GROUP
8D-8595 HYDRAULIC SCARIFIER GROUP
8D8595 HYDRAULIC SCARIFIER GROUP--"V" Type--Part 1 of 2-Type 1
Part of 9D5470 VEE Scarifier Arrangement listed on Page 234
8D-8595 HYDRAULIC SCARIFIER GROUP
8D8595 HYDRAULIC SCARIFIER GROUP--"V" Type--Part 2 of 2-Type 1
Part of 9D5470 VEE Scarifier Arrangement listed on Page 234
HYDRAULIC SCARIFIER GROUP
8D-8595 HYDRAULIC SCARIFIER GROUP
8D8595 HYDRAULIC SCARIFIER GROUP--"V" Type--Part 1--Type 2
Replaced by 2G5570 shown on Pages 237C and 237D
Part of 9D5470 VEE Scarifier Arrangement listed on Page 234
8D-8595 HYDRAULIC SCARIFIER GROUP
8D8595 HYDRAULIC SCARIFIER GROUP--"V" Type--Part 2--Type 2
Replaced by 2G5570 shown on Pages 237C and 237D
Part of 9D5470 VEE Scarifier Arrangement listed on Page 234
HYDRAULIC SCARIFIER GROUP
2G-5570 HYDRAULIC SCARIFIER GROUP
2G5570 HYDRAULIC SCARIFIER GROUP--"V" Type--Part 1
Part of 9D5470 VEE Scarifier Arrangement listed on Page 234
2G-5570 HYDRAULIC SCARIFIER GROUP
2G5570 HYDRAULIC SCARIFIER GROUP--"V" Type--Part 2
Part of 9D5470 VEE Scarifier Arrangement listed on Page 234

Information:

(For parts list, see above)

Special Instruction
Test Procedure For Automatic Blade Control On Articulated Motor Graders{5216}
Test Procedure For Automatic Blade Control On Articulated Motor Graders{5216}
Installation of 8W2408 Blade Float Arrangement{5241}
Installation of 8W2408 Blade Float Arrangement{5241}
Modifying Early Drawbars To Accept A Bolt-On Ball{6153, 6157, 6170, 6171}
Modifying Early Drawbars To Accept A Bolt-On Ball{6153, 6157, 6170, 6171}
Installation Of 2G6820, 2G6830, 2G6840 And 2G6850 Sideshift Extension Groups{5227}
Installation Of 2G6820, 2G6830, 2G6840 And 2G6850 Sideshift Extension Groups{5227}
Installation Of Blade Cushion Accumulator Arrangements{5077}
Installation Of Blade Cushion Accumulator Arrangements{5077}
Installation Of Blade Float Attachment Arrangements{6150}
Installation Of Blade Float Attachment Arrangements{6150}
Modifications To Blade Cushion Attachments{5077}
Modifications To Blade Cushion Attachments{5077}
Specifications
Blade Tip
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Centershift And Blade Lift
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Blade Lift Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Reuse And Salvage Guidelines
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Disassembly and Assembly
Blade Lift Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Arms
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Bar
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Tip Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Swivel Joint
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Assembly
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Lock Check And Relief Valve
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Tip Lock Check Valve
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive And Blade Sideshift Lock Check Valves
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Lock Check Valve
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Lock Check And Relief Valve And Lock Check Valves
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Arms
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Bar
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Sideshift Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Tip Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Assembly
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Service Magazine
Valve Assembly Used In Centershift Lock Control Group To Prevent Accidental Rotation And Lowering Of Blade{5220,5221,5223,6151}
1980/10/20
Valve Assembly And Nipple Moved From Centershift Lock Control Group To Brake Control Group To Prevent Unauthorized Operation{4282,4267,5220,5221,5223,6151}
1980/11/10
Replacement Moldboard Rail Sections Are Available{5230,6151}
1981/08/10
Shorter Wiper Blade Prevents Contact With Windshield Seal{7305}
1981/11/23
Correct Position Of Shims In Blade Lift And Centershift Cylinder Groups{5102,5223}
1982/04/12
New, Narrower Blade Tip Brackets Used{5254,6154}
1982/10/11
New Wear Strips For Moldboard Rail Will Increase Service Life Of The Rail{5230}
1984/03/12
Steel Wear Strips Available For Motor Grader Blade Rail{6150,6153}
1986/06/02
Modification Of Circuitry In 9D6720 Junction Box Prevents Failure Of Automatic Blade Control{5260}
1977/03/21
New Windshield Wiper Group Uses Single Arm Instead Of Double Parallel Arm, And Shorter Blade Arc (Movement){7305}
1977/04/11
Centershift Extension Groups: A Better Method To Cut A Bank Slope At A 2:1 Ratio{5229,6151}
1977/04/11
New Accumulator With Improved Piston And Seals Used In Blade Cushion Arrangement And Steering System{5077,5200,4300}
1977/06/20
Correct Adjustment Of Automatic Blade Control For Accuracy Of Slope Angle Cut In Relation To Slope Control Dial Position{5216}
1977/10/03
New Adjustable Rail Wear Strip Kit Available For Blade Brackets{5254,5230}
1987/07/06
One-Piece Wear Strip Is Replacement For Two-Piece Wear Plate And Adjustment Screw On The Moldboard Sideshift{6154,6151}
1978/05/22
Modification To Make The Snow Wing And/Or Blade Sideshift Move Faster{5227,6150}
1988/04/18
New Blade Lift And Centershift Cylinders Have Caps With Shims For Adjustment{5102,5223}
1979/03/12
Adjustment Procedure For Blade Lift Cylinders And Centershift Cylinders{5223,5102}
1979/03/26
More Information About Use Of Shims With New One-Piece Wear Strips In Circle Groups For Hydraulic Sideshift Moldboards{6154,6151}
1979/07/02
Moldboard Repair Plates Are Adaptable To Current Machines{6151}
1979/12/10
Adjustable Wear Strip Kit Available For Blade Cylinder Tip Bracket {5254,5230}
1989/05/08
During Predelivery, Make Sure Nitrogen Charge Pressure Is Correct In Blade Cushion Accumulators{5077}
1989/10/16
Steel Wear Strips Can Be Modified To Make Them Adjustable {6151}
1990/02/05
New Drawbar Group Used As Standard Equipment{6157}
1991/11/25
New End Bits Used On Moldboards {6804}
1992/03/09
Lock Group Available For Plow/Dozer On Motor Graders Equipped With Load Sensing Hydraulics {5116,5100}
1993/01/18
New Blade Lift Valves Used For Easier Addition Of Valve Sections To The Valve Group {5051}
1993/10/04
Lock Valve Group With A Relief For Right Blade Lift Cylinder Is Available On Motor Graders{5102,5100}
1994/02/07
Thicker Retaining Ring Is Available For Use With CAT® GraderBit Assemblies{6151,6150}
1994/02/14
Replaceable Sleeve Bearings Can Be Installed In The Circle Assembly And Moldboard Rail Brackets {6154,6157}
1994/02/21
6G-2943 Circle Assembly Can Be Reinforced To Improve Service Life In Severe Applications {6154,6157}
1994/02/28
Special Instructions SEHS9896, REHS0037 And REHS0038 Available For Installation Of A Bolt-On Ball On Early Drawbars{6153,6157,6170,6171}
1996/11/11
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Hardened Full Length Moldboard Rails Are Available for Parts Service {6151}
2001/09/04
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Snap Ring Improves Rod Wiper Seal Retention {4303,5101,5102,5104,5213}
1999/07/12
Special Instruction
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
Procedure To Adjust Support Bearing Preload And Gear Backlash (Tooth Clearance) For Bevel Gear And Pinion{3258,3256,3257}
1980/04/14
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
New Circle Guide Shoes Can Be Adjusted For Better Control Of Clearance Between Circle Teeth And Drive Pinion{6155,6153}
1981/07/13
6V6037, 6V6038, And 6V6039 Template Available For Installation Of Circle Tooth Segments{0626,6152}
1982/05/10
Improved Circle Tooth Segment{6152}
1982/08/16
Modification To Permit Installation Of Locking Pin In Scarifier Shank Holder{6811}
1978/02/20
New Heavy-Duty Ripper Shank And Tips Available {6808,6810}
1989/05/08
New End Bits Used On Moldboards {6804}
1992/03/09
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
New Adapters for the Moldboard are Now Available on Certain Motor Graders {6174, 6801, 6804}
2015/02/10
Special Instruction
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Service Magazine
New Heavy-Duty Ripper Shank And Tips Available {6808,6810}
1989/05/08
New Cam Adjustable Link Now Used With Motor Grader Rippers{6166}
1994/07/18
An Improved Lower Link for the Ripper Assembly is Available {6313, 6324}
2000/07/17
Special Instruction
Installation Of 2G6835 And 2G6845 Vee And 2G7155 Straight Scarifier Arrangements{6162}
Installation Of 2G6835 And 2G6845 Vee And 2G7155 Straight Scarifier Arrangements{6162}
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Specifications
Scarifier Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Service Magazine
Scarifier Mounting Can Be Modified To Prevent Loosening{6150,6162}
1985/04/29
New Scarifier Arrangements Have Several Design Improvements{6162}
1978/01/23
Modification To Permit Installation Of Locking Pin In Scarifier Shank Holder{6811}
1978/02/20
New Articulation And Scarifier Cylinders Have Larger Piston Retaining Bolts{5213,7058}
1988/10/24
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Hydraulic Swivel {0679, 5060}
Thermal Spray Procedures for Hydraulic Swivel {0679, 5060}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.