AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8D7470 CIRCLE DRIVE GROUP--Part 2 Serial No. 72V372 to 383, 641 to 650 and 72V654 to 72V669 inclusive 140G


HYDRAULIC SYSTEM
DRIVE GP
MOTOR GP
VALVE GP-CHECK
MOTOR GP
LINES GP-HYDRAULIC

MOTOR GRADER 140G MOTOR GRADER 72V
 140G MOTOR GRADER 72V00001-00822 (MACHINE) UEG0854S 140G 72V   (1974)

HYDRAULIC SYSTEM

DRIVE GP
8D-7470 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
9D-1600 DRIVE GP-CIRCLE
9D-1600 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
9D-1600 DRIVE GP-CIRCLE
 

#UEG0854S0260
 

8D-7470: DRIVE GP-CIRCLE

8D7470 CIRCLE DRIVE GROUP--Part 2
Serial No. 72V372 to 383, 641 to 650 and 72V654 to 72V669 inclusive
c152950 UEG0854S
8D7470 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4719 [4] NUT  
  3B-4508 [4] LOCKWASHER  
2. 8D-9812 [1] HOUSING ASSEM.  
    (Includes)
3. 2D-8154 [4] STUD  
4. 8D-7426 [1] BEARING  
5. 7D-9137 [2] STUD  
6. 2D-8369 [2] STUD  
7. 5F-5434 [1] VENT ASSEM.  
8. 8D-7174 [1] COVER ASSEM.  
    (Includes)
9. 8D-7173 [1] BEARING  
10. 5H-4909 [1] SEAL  
11. 0S-1625 [9] BOLT  
  3K-2889 [9] LOCKNUT  
  2S-5658 [9] WASHER  
12. 8D-5344 [1] GEAR (36 teeth)  
13. 1D-4609 [2] BOLT  
  4F-8135 [2] WASHER  
14. 5K-5288 R [1] SEAL GROUP  
    (Includes)
15. 5K-5129 [2] RING  
16. 8D-7425 [2] WASHER  
17. 8D-7427 [1] SHAFT  
18. 1A-1415 [1] NUT  
  8D-7423 [1] LOCK  
  8D-7424 [1] SPACER  
19. 1K-6870 [4] NUT  
20. 4D-6989 [4] WASHER  
21. 4F-8824 [1] SEAL  
22. 8D-7414 [1] PINION  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0854S0261
 

9D-1600: DRIVE GP-CIRCLE

9D1600 CIRCLE DRIVE GROUP--Part 1 of 2--Type 1
Part of 9D6985 and 9D6995 Blade Control Arrangements listed on Pages 162 and 163
9J688 and 9J439 Motor parts are shown on Pages 138 and 138A. AN ATTACHMENT
c152449 UEG0854S
9D1600 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0688 [1] MOTOR GROUP  
    -OR-
  9J-0439 YC [1] MOTOR GROUP  
    (Separate Illustration)
3. 1B-5174 [1] PLUG  
4. 9D-1473 [1] WORM  
5. 5K-8454 [3] BOLT  
6. 3B-4508 [10] LOCKWASHER  
7. 6H-1717 [5] BOLT  
8. 2B-7410 [1] PLUG  
9. 2H-9247 [1] SEAL  
10. 9D-1051 [1] CARRIER  
11. 7D-8933 [3] SHAFT  
12. 7D-9015 [3] BEARING  
13. 7D-8932 [6] WASHER  
14. 7D-8931 [1] WASHER  
15. 1H-8128 [1] SEAL  
16. 7D-8929 [3] GEAR (22 teeth)  
17. 7D-9092 [1] HOUSING ASSEM.  
    (Includes)
18. 2D-8806 [2] STUD  
19. 1B-5357 [2] NUT  
20. 7D-8983 [10] SHIM .005 in. (.127 mm) thick  
  7D-8984 [6] SHIM .007 in. (.178 mm) thick  
21. 9M-7432 [1] SEAL  
22. 1B-8708 [1] KEY  
23. 1B-4038 [2] CUP  
  1B-4046 [2] CONE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0854S0262
 

9D-1600: DRIVE GP-CIRCLE

9D1600 CIRCLE DRIVE GROUP--Part 2 of 2--Type 1
Part of 9D6985 and 9D6995 Blade Control Arrangements listed on Pages 162 and 163
AN ATTACHMENT
c202443 UEG0854S
9D1600 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-5357 [4] NUT  
  3B-4508 [4] LOCKWASHER  
2. 9D-1407 [1] HOUSING ASSEM.  
    (Includes)
3. 2D-8154 [4] STUD  
4. 8D-7426 [1] BEARING  
5. 7D-9137 [2] STUD  
6. 2D-8369 [2] STUD  
7. 5F-5434 [1] VENT ASSEM.  
8. 8D-7174 [1] COVER ASSEM.  
    (Includes)
9. 8D-7173 [1] BEARING  
10. 5H-4909 [1] SEAL  
11. 0S-1625 [9] BOLT  
  3K-2889 [9] LOCKNUT  
  2S-5658 [9] WASHER  
12. 8D-5344 [1] GEAR (36 teeth)  
13. 1D-4609 [2] BOLT  
  4F-8135 [2] WASHER  
14. 5K-5288 R [1] SEAL GROUP  
    (Includes)
15. 5K-5129 [2] RING  
16. 8D-7425 [2] WASHER  
17. 8D-7427 [1] SHAFT  
18. 1A-1415 [1] NUT  
  8D-7423 [1] LOCK  
  8D-7424 [1] SPACER  
19. 1K-6870 [4] NUT  
20. 4D-6989 [4] WASHER  
21. 4F-8824 [1] SEAL  
22. 8D-7414 [1] PINION  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0854S0263
 

9D-1600: DRIVE GP-CIRCLE

9D1600 CIRCLE DRIVE GROUP--Part 1--Type 2
Part of 9D6985 and 9D6995 Blade Control Arrangements listed on Pages 162 and 163
9J688 and 9J439 Motor parts are shown on Pages 138 and 138A. AN ATTACHMENT
c156431 UEG0854S
9D1600 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0688 [1] MOTOR GROUP  
    -OR-
  9J-0439 Y [1] MOTOR GROUP  
    (Separate Illustration)
3. 1B-5174 [1] PLUG  
4. 9D-1473 [1] WORM  
5. 5K-8454 [3] BOLT  
6. 3B-4508 [10] LOCKWASHER  
7. 6H-1717 [5] BOLT  
8. 2B-7410 [1] PLUG  
9. 2H-9247 [1] SEAL  
10. 9D-1051 [1] CARRIER  
11. 7D-8933 [3] SHAFT  
12. 7D-9015 [3] BEARING  
13. 7D-8932 [6] WASHER  
14. 7D-8931 [1] WASHER  
15. 1H-8128 [1] SEAL  
16. 7D-8929 [3] GEAR (22 teeth)  
17. 2G-1712 C [1] HOUSING  
19. 0S-1585 C [2] BOLT  
20. 7D-8983 [10] SHIM .005 in. (.127 mm) thick  
  7D-8984 [6] SHIM .007 in. (.178 mm) thick  
21. 9M-7432 [1] SEAL  
22. 1B-8708 [1] KEY  
23. 1B-4038 [2] CUP  
  1B-4046 [2] CONE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0854S0264
 

9D-1600: DRIVE GP-CIRCLE

9D1600 CIRCLE DRIVE GROUP--Part 2--Type 2
Part of 9D6985 and 9D6995 Blade Control Arrangements listed on Pages 162 and 163
AN ATTACHMENT
c209853 UEG0854S
9D1600 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4719 C [4] NUT  
  3B-4508 [4] LOCKWASHER  
2. 9D-1407 [1] HOUSING ASSEM.  
    (Includes)
3. 2D-8154 [4] STUD  
4. 8D-7426 [1] BEARING  
5. 7D-9137 [2] STUD  
6. 4D-6578 C [2] STUD  
7. 5F-5434 [1] VENT ASSEM.  
8. 8D-7174 [1] COVER ASSEM.  
    (Includes)
9. 8D-7173 [1] BEARING  
10. 5H-4909 [1] SEAL  
11. 0S-1625 [9] BOLT  
  3K-2889 [9] LOCKNUT  
  2S-5658 [9] WASHER  
12. 8D-5344 [1] GEAR (36 teeth)  
13. 1D-4609 [2] BOLT  
  7M-2360 C [2] WASHER  
14. 5K-5288 R [1] SEAL GROUP  
    (Includes)
15. 5K-5129 [2] RING  
16. 8D-7425 [2] WASHER  
17. 8D-7427 [1] SHAFT  
18. 1A-1415 [1] NUT  
  8D-7423 [1] LOCK  
  8D-7424 [1] SPACER  
19. [4] NUT  
20. 4D-6989 [4] WASHER  
21. 4F-9653 C [1] SEAL  
22. 8D-7414 [1] PINION  
  C   INDICATES CHANGE
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0854S0265
 

9J-0688: PISTON MOTOR GROUP

9J688 PISTON MOTOR GROUP
Serial No. 72V1 to 371, 384 to 640, 651 to 653 and 72V670-Up. Part of 8D7470
and 9D1600 Circle Drive Groups shown on Pages 134, 136 and 137A
c203506 UEG0854S
9J0688 PISTON MOTOR GROUP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0697 [3] PIN  
2. 9J-0695 [1] SPIDER  
3. 9J-0732 [1] RACE  
4. 5P-1827 [2] RACE  
5. 9J-0731 [1] HOUSING ASSEM.  
    (Includes)
6. 5P-1941 [1] BEARING  
7. 008-3214 [1] RING  
8. 9J-0740 [1] SHAFT  
9. 5P-1825 [1] SEAL  
10. 5P-1828 [1] BEARING  
11. 9J-0736 [1] PIVOT  
12. 9J-2501 [1] RETAINER  
13. 9J-0735 [1] WASHER  
14. 9J-0741 [1] SPRING  
15. 9J-0730 [1] BARREL  
16. 9J-0734 [1] WASHER  
17. 1A-9579 C [6] BOLT  
18. 4F-3544 [1] RING  
19. 9J-0733 [1] PLATE ASSEM.  
    (Includes)
20. 033-5381 [1] BEARING  
21. 1L-3768 [1] RING  
22. 3K-0715 [1] SEAL  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  9J-0738 [1] KIT (piston)  
  C   INDICATES CHANGE
 

#UEG0854S0266
 

8J-5913: VALVE GP

8J5913 PILOT OPERATED CHECK VALVE GROUP
Part of 8D8630 Circle Motor Lines, 8D8580 and 8D8640 Blade Lines, 9D6420
Blades Shift Lines and 8D8600 Hydraulic Leaning Wheel Lines Group shown
c207401 UEG0854S
8J5913 VALVE GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0404 [2] PLUG  
  7J-9933 C [2] SEAL  
3. 9J-4871 C [2] BALL  
4. 9J-0403 [2] SPRING  
5. 9J-8285 C [1] BODY ASSEM.  
    (Includes)
6. 9J-5768 [1] PISTON  
7. 9J-0405 [2] SEAT  
  C   INDICATES CHANGE
 

#UEG0854S0267
 

9J-0439: MOTOR GP-PISTON

9J439 PISTON MOTOR GROUP
Serial No. 72V372 to 383, 641 to 650 and 72V654 to 72V699 inclusive
Part of 8D7470 and 9D1600 Circle Drive Groups shown on Pages 134B and 136
c200258 UEG0854S
9J0439 MOTOR GP-PISTON Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1829 [1] BEARING  
2. 2R-1236 [1] RING  
3. 9J-0450 [1] SPACER  
4. 9J-0449 [2] DOWEL  
5. 9J-0443 [1] PLATE ASSEM.  
    (Includes)
6. 033-5381 [1] BEARING  
7. 0S-1590 [4] BOLT  
8. 5P-1830 [1] BEARING  
9. 2N-8611 [1] RING  
10. 9J-0441 [1] CARTRIDGE ASSEM. (15 GPM)  
11. 9J-0438 [1] HOUSING  
12. 9J-0446 [1] RETAINER  
13. 2J-7550 [1] RING  
14. 9J-0442 [1] SHAFT  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  9J-0454 [1] SEAL KIT  
    (Includes Gasket and Seals)
 

#UEG0854S0268
 

8D-8630: CIRCLE DRIVE MOTOR LINES GROUP

8D8630 CIRCLE DRIVE MOTOR LINES GROUP
Serial No. 72V372 to 383, 641 to 650 and 72V654 to 72V669 inclusive
8J5913 Valve parts are shown on Page 138
c152451 UEG0854S
8D8630 CIRCLE DRIVE MOTOR LINES GROUP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-4362 [4] ELBOW  
2. 3K-0360 [15] SEAL  
3. 9D-5968 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 535 cm(210.63 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
4. 030-8188 [4] CONNECTOR  
5. 9D-5964 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 386 cm(151.97 in.)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 DEGREES)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
6. 0L-1143 [3] BOLT  
7. 3B-4506 [7] LOCKWASHER  
8. 8J-5913 Y [1] CHECK VALVE GROUP  
    (Separate Illustration)
9. 7D-9984 [5] ELBOW  
10. 9D-5864 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 85 cm(33.46 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
11. 8D-5258 [1] BLOCK  
  9S-4191 [1] PLUG  
12. 0T-0573 [2] BOLT  
13. 8D-9501 [1] BLOCK  
14. 1A-5822 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
15. 9D-5965 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 156 cm(61.42 in.)  
  4S-5414 [2] SLEEVE  
  2P-0987 [1] COUPLING ASSEM. (str.)  
  2P-1461 [1] COUPLING ASSEM. (90 DEGREES)  
16. 9D-1221 [2] CLAMP  
17. 0L-1351 [2] BOLT  
18. 030-7962 [2] ELBOW  
19. 030-8189 [2] CONNECTOR  
  3D-2824 [2] SEAL  
20. 3J-1907 [2] SEAL  
21. 9D-5929 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 81 cm(31.89 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
22. 030-7948 C [1] ELBOW  
23. 9D-5967 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 168 cm(66.14 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (str.)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
24. 9D-5966 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 167 cm(65.75 in.)  
  4S-5414 [2] SLEEVE  
  2P-0987 [1] COUPLING ASSEM. (str.)  
  2P-1461 [1] COUPLING ASSEM. (90 degrees)  
25. 030-7947 C [1] ELBOW  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#UEG0854S0269
 

8D-8630: CIRCLE DRIVE MOTOR LINES GROUP

8D8630 CIRCLE DRIVE MOTOR LINES GROUP
Serial No. 72V1 to 371, 384 to 640, 651 to 653 and 72V670-Up
8J5913 Valve parts are shown on Page 138
c152450 UEG0854S
8D8630 CIRCLE DRIVE MOTOR LINES GROUP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-4362 C [4] ELBOW  
2. 3K-0360 [15] SEAL  
3. 9D-5968 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 535 cm(210.63 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
4. 030-8188 [4] CONNECTOR  
5. 9D-5964 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 386 cm(151.97 in.)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
6. 0L-1143 [3] BOLT  
7. 3B-4506 [7] LOCKWASHER  
8. 8J-5913 Y [1] CHECK VALVE GROUP  
    (Separate Illustration)
9. 7D-9984 [5] ELBOW  
10. 9D-5864 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 85 cm(33.46 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
11. 8D-5258 [1] BLOCK  
  9S-4191 [1] PLUG  
12. 0T-0573 [2] BOLT  
13. 8D-9501 [1] BLOCK  
14. 1A-5822 [2] BOLT  
  3B-4508 [2] LOCKWASHER  
15. 9D-5965 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 156 cm(61.42 in.)  
  4S-5414 [2] SLEEVE  
  2P-0987 [1] COUPLING ASSEM. (str.)  
  2P-1461 [1] COUPLING ASSEM. (90 degrees)  
16. 9D-1221 [2] CLAMP  
17. 0L-1351 [2] BOLT  
18. 030-7962 [2] ELBOW  
19. 030-8189 [2] CONNECTOR  
  3D-2824 [2] SEAL  
20. 3J-1907 [2] SEAL  
21. 9D-5929 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 81 cm(31.89 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
22. 030-7948 C [1] ELBOW  
23. 9D-5967 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 168 cm(66.14 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] COUPLING ASSEM. (str.)  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
24. 9D-5966 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 167 cm(65.75 in.)  
  4S-5414 [2] SLEEVE  
  2P-0987 [1] COUPLING ASSEM. (str.)  
  2P-1461 [1] COUPLING ASSEM. (90 degrees)  
25. 2R-6806 C [1] CONNECTOR  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

Information:

Special Instruction
Procedure For Rebuilding And Installing The All Wheel Drive (AWD) Pump Drive Transfer Gear Group{3011}
Procedure For Rebuilding And Installing The All Wheel Drive (AWD) Pump Drive Transfer Gear Group{3011}
Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207}
Procedure to Install the New Pinion Shaft and Circle Worm Drive in the Circle Drive{5207}
Service Letter-NACD
Product Support Program For Reworking The Pump Drive Transfer Gear Group On Certain 12G And 140G All Wheel Drive (AWD) Motor Graders
Product Support Program For Reworking The Pump Drive Transfer Gear Group On Certain 12G And 140G All Wheel Drive (AWD) Motor Graders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Specifications
Drive For Hydraulic Pump
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Pump Drive
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Circle Drive Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Circle Drive With Slip Clutch Group (Attachment)<BR> (5T0570 - 12G, 120G, 130G, 140G)
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Service Letter-China
Product Support Program For Reworking The Pump Drive Transfer Gear Group On Certain 12G And 140G All Wheel Drive (AWD) Motor Graders
Product Support Program For Reworking The Pump Drive Transfer Gear Group On Certain 12G And 140G All Wheel Drive (AWD) Motor Graders
Service Letter-Asia
Reuse And Salvage Guidelines
Motor Grader Circle Pinion Reuse {5207}
Motor Grader Circle Pinion Reuse {5207}
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Procedure to Repair Worn Blade Circles for Series G Motor Graders{5207, 6154}
Service Letter-APD
Product Support Program For Reworking The Pump Drive Transfer Gear Group On Certain 12G And 140G All Wheel Drive (AWD) Motor Graders
Product Support Program For Reworking The Pump Drive Transfer Gear Group On Certain 12G And 140G All Wheel Drive (AWD) Motor Graders
Disassembly and Assembly
Pump Group Drive Shaft
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140
Circle Drive Motor
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Pump Drive
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Circle Drive And Blade Sideshift Lock Check Valves
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive Motor (Earlier)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive Motor (Later)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive (Earlier)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive (Later)
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Pump Drive
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Pump Group Drive Shaft
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12
Service Magazine
Slip Clutches Now Available On Circle Drive Group{5058,5237,5207,6154}
1981/02/09
Less Oil Used In Circle Drive Group To Prevent Leakage Through Vent Assembly{5207}
1984/01/30
Lubrication Of Circle Drive Pinion And Wear Strips; Wear Strip Clearance Adjustment{5207,6155}
1984/11/05
Order The Correct Replacement Parts For Piston Motor Groups In The Circle Drive{5058}
1984/11/19
Hydraulic Motor And Lines Changed For Circle Drive{5050,5200}
1977/04/11
Correct Adjustment And Lubrication Will Improve Circle Component Life {5207,6154}
1987/08/03
Procedure To Test And Adjust Circle Drive Slip Clutch{5207}
1987/08/10
Back-Up Rings Added To Circle Drive Gerotor Motor Groups{5082}
1987/10/12
Back-Up Rings Made Of Harder Material Are Available For Use In Circle Drive Gerotor Motor Groups {5082}
1988/05/02
New Circle Drive Pinions Have Longer Service Life {5207}
1988/09/26
New Circle Drive Gerotor Motor Groups Provide Higher Torque To Circle Drive {5082}
1988/12/19
New Seal Ring Used In Gerotor Motor Group For Circle Drive{5050,5200}
1979/04/02
Items To Check If Excessive Effort Is Required To Operate Circle Drive Motor{5050,5235}
1989/01/30
Be Sure To Use Correct Plug On Pump Drive Gearbox To Check Oil Level {3108,7500}
1990/02/26
Different Universal Joint Group May Be Used In 7D9600 Pump Drive Group {3108}
1990/05/28
Corrections to Disassembly and Assembly Module For 12G, 120G, 130G, 140G Motor Graders Vehicle Systems, SENR3650 {5058}
1990/07/02
New Shaft Used In Transfer Gear Group For Hydraulic Pump Drive; Sight Gauge Added{3108,3159,7479}
1991/06/10
Circle Drives Now Use Gear Oil{5207,5200,0645,7555,7561}
1992/03/02
Circle Drive Unit Cover Can Be Modified To Prevent Oil Loss Through The Vent{5201,5209}
1994/03/07
New Splined Circle Drive Group Provides Improved Performance {5207}
1995/04/10
All Wheel Drive (AWD) Pump Drive Transfer Gear Group Has Been Improved To Give Longer Service Life.{3011}
1995/06/26
Ground Body Bolts And Locknuts Improve Retention Of The Aluminum Gear In The Circle Drive Groups {5207}
1995/09/11
Correction to Service Magazine , "Circle Drive can be Modified to Improve Performance" {5207}
2001/12/03
Procedure To Test the Slip Clutch for the Circle Drive {5082, 5207, 5209}
2004/08/16
Circle Worm Drive Has Been Improved on Certain Motor Graders {5207}
2008/05/12
An Improved Pinion Shaft with a New Rugged Bolted Joint Provides Consistent Torque on the Circle Drive {5207}
2008/05/12
The Disassembly and Assembly Manual for Worm Gear Bearing Preload Setting has been Updated on Certain Motor Graders {5207}
2015/01/16
A New Shaft With New Pinion In The Circle Drive Group Is Now Used On Certain Motor Graders {5207}
A New Shaft With New Pinion In The Circle Drive Group Is Now Used On Certain Motor Graders {5207}

Caterpillar Parts SIS Catalog 140G :

DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
8D-7470 DRIVE GP-CIRCLE
AIR RESERVOIR TANK GROUP
9D-5050 AIR RESERVOIR TANK GROUP
CIRCLE AS
9D-4926 CIRCLE AS
CIRCLE AS
9D-4926 CIRCLE AS
DRIVE GP-CIRCLE
9D-1600 DRIVE GP-CIRCLE
9D-1600 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
9D-1600 DRIVE GP-CIRCLE
9D-1600 DRIVE GP-CIRCLE
PISTON MOTOR GROUP
9J-0688 PISTON MOTOR GROUP
VALVE GP
8J-5913 VALVE GP
MOTOR GP-PISTON
9J-0439 MOTOR GP-PISTON
CIRCLE DRIVE MOTOR LINES GROUP
8D-8630 CIRCLE DRIVE MOTOR LINES GROUP

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.