AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8J24 BLADE TIP CYLINDER GROUP--(Change 3) Replaced by 9J3466 shown on Page 154B Part of 7D9955 Blade Tip Cylinder and Mounting Group shown on Page 154 140G


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-HYDRAULIC
SWIVEL GP
LINES GP-HYDRAULIC

MOTOR GRADER 140G MOTOR GRADER 72V
 140G MOTOR GRADER 72V00001-00822 (MACHINE) UEG0854S 140G 72V   (1974)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & MOUNTING GP
9D-9830 CYLINDER & MOUNTING GP
CYLINDER GP-BLADE TIP
9J-3466 CYLINDER GP-BLADE TIP
BLADE TIP CYLINDER GROUP
8J-0024 BLADE TIP CYLINDER GROUP
CYLINDER GP-BLADE SIDE SHIFT
8J-0028 CYLINDER GP-BLADE SIDE SHIFT
CYLINDER & MOUNTING GP
8D-3310 CYLINDER & MOUNTING GP
STEERING CYLINDER GROUP
8J-5538 STEERING CYLINDER GROUP
 

#UEG0854S0300
 

8J-0024: BLADE TIP CYLINDER GROUP

8J24 BLADE TIP CYLINDER GROUP--(Change 3)
Replaced by 9J3466 shown on Page 154B
Part of 7D9955 Blade Tip Cylinder and Mounting Group shown on Page 154
c200106 UEG0854S
8J0024 BLADE TIP CYLINDER GROUP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-0112 [1] RING  
2. 8J-0023 R [1] CYLINDER ASSEM.  
3. 2D-8652 [1] BEARING  
  8J-3774 [2] RING  
4. 4J-8979 [1] SEAL  
5. 1H-5728 [1] SEAL  
6. 4J-9225 [1] RING  
7. 8J-0119 [1] HEAD  
8. 8J-0118 [1] CROWN  
9. 8J-6901 R [1] ROD ASSEM.  
10. 2D-8652 [1] BEARING  
  8J-3774 [2] RING  
11. 8J-5912 [1] SCREW  
12. 5J-8150 [1] SEAL  
13. 7J-5639 [1] BOLT  
14. 6J-9733 [1] SEAL  
15. 5J-7010 [1] SEAL ASSEM.  
16. 8J-0113 [1] PISTON  
17. 8J-7415 [1] WASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0854S0301
 

8J-0028: CYLINDER GP-BLADE SIDE SHIFT

8J28 BLADE SIDE SHIFT CYLINDER GROUP--(Change 2)--3.00" Bore x 47.00" Stroke
Part of 7D9945 Blade Side Shift Cylinder and Mounting Group shown on Page 154
c200097 UEG0854S
8J0028 CYLINDER GP-BLADE SIDE SHIFT Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7J-5639 [1] BOLT  
2. 6J-5733 [1] RING  
3. 6J-1972 [1] SEAL ASSEM.  
4. 6J-9178 [1] SEAL  
5. 8J-5912 [1] SCREW  
6. 8J-5911 [1] CROWN  
7. 8J-6681 R [1] ROD ASSEM.  
8. 4J-8980 [1] SEAL  
9. 5J-8175 [1] SEAL  
10. 7J-3351 [1] HEAD  
11. 6J-5731 [1] RING  
12. 5H-8848 [1] SEAL  
13. 8J-0027 R [1] CYLINDER ASSEM.  
    (Includes)
14. 6J-0499 [2] LUG  
15. 7J-5682 [1] PISTON  
16. 3K-5234 [1] WASHER  
  R   REMFG PART MAY BE AVAILABLE
 

#UEG0854S0302
 

8D-8580: HYDRAULIC BLADE TIP LINES GROUP

8D8580 HYDRAULIC BLADE TIP LINES GROUP--Type 1
Part of 9D6985, 9D6995 Blade Control and 9D6410, 9D6415 Power Blade and Tip Arrangements listed on Pages 162, 163 and 240
8J5913 Valve parts are shown on Page 138. AN ATTACHMENT
c200424 UEG0854S
8D8580 HYDRAULIC BLADE TIP LINES GROUP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-4362 [9] ELBOW  
2. 3K-0360 [20] SEAL  
3. 9D-5977 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 535 cm(210.63 in.)  
  8S-6392 [1] COUPLING ASSEM.  
4. 8D-0081 [1] BLOCK  
5. 0T-0573 [2] BOLT  
6. 3B-4506 [5] LOCKWASHER  
7. 9S-4191 [2] PLUG  
  3J-1907 [2] SEAL  
8. 7D-9984 [6] ELBOW  
9. 9D-5864 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 85 cm(33.46 in.)  
10. 030-8188 [5] CONNECTOR  
11. 9D-5980 [2] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 148 cm(58.27 in.)  
12. 9D-5978 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [1] COUPLING ASSEM.  
  8S-6393 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 60 cm(23.62 in.)  
13. 9D-5979 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 69 cm(27.17 in.)  
14. 9D-5862 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 54 cm(21.26 in.)  
15. 9D-5981 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 34 cm(13.39 in.)  
  8S-6393 [1] COUPLING ASSEM.  
16. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
17. 0S-1619 [3] BOLT  
  1D-4717 [3] NUT  
  Y   SEPARATE ILLUSTRATION
 

#UEG0854S0303
 

8D-8580: HYDRAULIC BLADE TIP LINES GROUP

8D8580 HYDRAULIC BLADE TIP LINES GROUP--Type 2
Replaced by 2G3430 shown on Page 157B. Part of 9D6985, 9D6995, 9D6410 and 9D6415 Power Blade
Arrangements listed on Pages 162, 163 and 240. 8J5913 Valve parts are shown on Page 138
AN ATTACHMENT
c159025 UEG0854S
8D8580 HYDRAULIC BLADE TIP LINES GROUP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-4362 C [8] ELBOW  
2. 3K-0360 [20] SEAL  
3. 9D-5977 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 535 cm(210.63 in.)  
  8S-6392 [1] COUPLING ASSEM.  
4. 8D-0081 [1] BLOCK  
5. 0T-0573 [2] BOLT  
6. 3B-4506 [5] LOCKWASHER  
7. 9S-4191 [2] PLUG  
  3J-1907 [2] SEAL  
8. 7D-9984 [6] ELBOW  
9. 9D-5864 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 85 cm(33.46 in.)  
10. 030-8188 C [6] CONNECTOR  
11. 9D-5980 [2] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 148 cm(58.27 in.)  
12. 9D-5978 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [1] COUPLING ASSEM.  
  8S-6393 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 60 cm(23.62 in.)  
13. 9D-5979 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 69 cm(27.17 in.)  
14. 9D-5862 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 54 cm(21.26 in.)  
15. 9D-5981 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  5P-0178 HOSE 34 cm(13.39 in.)  
  8S-6393 [1] COUPLING ASSEM.  
16. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
17. 0S-1619 [3] BOLT  
  1D-4717 [3] NUT  
18. 6K-9194 C [1] ELBOW  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#UEG0854S0304
 

2G-3430: LINES GP-HYDRAULIC

2G3430 HYDRAULIC BLADE TIP LINES GROUP--1 Circuit
Part of 9D6985, 9D6995, 9D9900, 9D6410 and 9D6415 Power Blade Arrangements listed on
Pages 162, 163, 163A and 240. 8J5913 Valve parts are shown on Page 138. AN ATTACHMENT
c159026 UEG0854S
2G3430 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-4362 [6] ELBOW  
2. 3K-0360 [12] SEAL  
3. 9D-5977 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 535 cm(210.63 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  8S-6392 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
4. 0L-1143 [3] BOLT  
  5P-1075 [3] WASHER  
5. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
6. 030-8188 [3] CONNECTOR  
7. 2G-2558 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 249 cm(98.04 in.)  
  8S-6417 [2] STEM ASSEM.  
  4S-5414 [2] SLEEVE  
8. 2G-2557 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 243 cm(95.7 in.)  
  8S-6417 [2] STEM ASSEM.  
  4S-5414 [2] SLEEVE  
9. 7D-9984 [3] ELBOW  
10. 9D-5970 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 77 cm(30.32 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [1] STEM ASSEM.  
  8S-6392 [1] STEM ASSEM.  
11. 9D-6048 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 97 cm(38.20 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
 

#UEG0854S0305
 

8D-8640: POWER BLADE SHIFT LINES GROUP

8D8640 POWER BLADE SHIFT LINES GROUP
Replaced by 2G3450 shown on Page 158A. Part of 9D6985, 9D6995 Blade Control and 9D6410, 9D6415 Power
Blade and Tip Arrangements listed on Pages 162, 163 and 240. 8J5913 Valve and 8J384 Swivel parts are
shown on Pages 138 and 159. AN ATTACHMENT
c208783 UEG0854S
8D8640 POWER BLADE SHIFT LINES GROUP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM.  
    For service of each furnish:
  5P-0178 H HOSE 369 cm(145.3 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [4] BOLT  
3. 3B-4506 [7] LOCKWASHER  
4. 1D-4717 [4] NUT  
5. 9D-5983 [2] HOSE ASSEM.  
    For service of each furnish:
  5P-0178 H HOSE 136 cm(53.5 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [16] SEAL  
8. 7D-9984 [6] ELBOW  
10. 9D-5980 [2] HOSE ASSEM.  
    For service of each furnish:
  5P-0178 H HOSE 148 cm(57.2 in.)  
  8S-6417 C [2] COUPLING ASSEM.  
  4S-5414 C [2] SLEEVE  
11. 9D-5864 [2] HOSE ASSEM.  
    For service of each furnish:
  5P-0178 H HOSE 85 cm(33.4 in.)  
  4S-5414 C [2] SLEEVE  
  8S-6417 C [2] COUPLING ASSEM.  
12. 0L-1143 [3] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-0384 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4629 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 3K-8320 [2] CLAMP  
22. 1S-0994 [2] CLIP  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0854S0306
 

2G-3450: LINES GP-HYDRAULIC

2G3450 HYDRAULIC POWER BLADE LINES GROUP--1 Circuit
Part of 9D6985, 9D6995, 9D9900, 9D6410 and 9D6415 Power Blade Arrangements listed on Pages 162,
163, 163A and 240. 8J5913 Valve and 8J384 Swivel parts are shown on Pages 138 and 159
AN ATTACHMENT
c159027 UEG0854S
2G3450 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 369 cm(145.3 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [4] BOLT  
3. 5P-1075 [7] WASHER  
4. 1D-4717 [4] NUT  
5. 9D-6068 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 127 cm(50 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [12] SEAL  
8. 7D-9984 [2] ELBOW  
9. 1S-0994 [2] CLIP  
10. 9D-5980 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 148 cm(57.2 in.)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
11. 2G-2558 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 249 cm(98.04 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
12. 0L-1143 [3] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-0384 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4628 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 3K-8320 [2] CLAMP  
22. 2G-2557 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 243 cm(95.7 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
 

#UEG0854S0307
 

8J-0384: SWIVEL GP

8J384 SWIVEL GROUP
Part of 8D8640 Power Blade Shift Lines Group shown on Page 158
c119661 UEG0854S
8J0384 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5J-1246 [6] SHIM  
2. 4K-1493 [2] SCREW  
3. 8J-0380 [1] RETAINER  
4. 8J-0385 [1] BODY  
5. 8J-2331 [7] SEAL  
6. 2H-3928 [7] SEAL  
7. 8J-0386 [1] ROTOR  
8. 0S-1585 [4] BOLT  
  3B-4508 [4] LOCKWASHER  
9. 3H-0107 [4] SEAL  
10. 8J-0377 [1] COVER  
11. 4J-9964 [2] SEAL  
12. 8J-2330 [2] SEAL  
 

#UEG0854S0308
 

8J-4568: SWIVEL JOINT GP

8J4568 SWIVEL JOINT GROUP
Part of 9D6420 Power Blade Shift Lines Group shown on Page 161
c202423 UEG0854S
8J4568 SWIVEL JOINT GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-4564 [1] RETAINER  
2. 4K-1493 [2] SCREW  
3. 8J-5512 [6] SHIM  
4. 8J-4562 [2] SEAL  
5. 8J-4561 [2] SEAL  
6. 8J-5863 [5] SEAL ASSEM.  
7. 8J-4567 [1] BODY  
8. 8J-4566 [1] ROTOR  
9. 9S-4185 [2] PLUG  
  3K-0360 [2] SEAL  
 

#UEG0854S0309
 

2G-3420: LINES GP-HYDRAULIC

2G3420 BLADE SHIFT LINES GROUP--1 Circuit
Part of 9D6405 and 9D6430 Power Blade Arrangements listed on Page 240
8J5913 Valve and 8J4568 Swivel parts are shown on Pages 138 and 159. AN ATTACHMENT
c159029 UEG0854S
2G3420 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 369 cm(145.3 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [2] BOLT  
3. 5P-1075 [5] LOCKWASHER  
4. 1D-4717 [2] NUT  
5. 9D-6068 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 127 cm(50 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [12] SEAL  
8. 7D-9984 [2] ELBOW  
9. 7K-1181 [1] STRAP  
10. 2G-2558 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 249 cm(98 in.)  
  8S-4055 [2] COUPLING ASSEM.  
  3S-8606 [2] SLEEVE  
11. 9D-5980 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 148 cm(58.20 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
12. 0L-1143 [3] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-4568 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4628 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 5H-1625 [1] CLAMP  
22. 1S-0994 [2] CLIP  
23. 0S-1585 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  031-5183 [1] SPACER  
24. 2G-2561 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 279 cm(109.9 in.)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  H   ORDER BY THE CENTIMETRE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Dimensions Of Articulated Joints And Steering Cylinder Bores For Motor Graders{7051, 7065, 7066}
Installation Of Improved Steering Cylinders, Sockets And Crossover Relief Valves On Motor Graders{4303}
Installation Of Improved Steering Cylinders, Sockets And Crossover Relief Valves On Motor Graders{4303}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Cylinders
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Mounting For Articulation Cylinder
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Cylinder Groups
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Cylinder Mounting
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Steering Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Wheel Lean Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Ball And Socket Joint Inserts
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Sideshift Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Centershift Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Tip Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Articulation Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Hydraulic Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Steering Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Wheel Lean Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Ball And Socket Joint Inserts
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Sideshift Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Tip Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Articulation Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Hydraulic Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Service Magazine
Valve Assembly Used In Centershift Lock Control Group To Prevent Accidental Rotation And Lowering Of Blade{5220,5221,5223,6151}
1980/10/20
Valve Assembly And Nipple Moved From Centershift Lock Control Group To Brake Control Group To Prevent Unauthorized Operation{4282,4267,5220,5221,5223,6151}
1980/11/10
Correct Position Of Shims In Blade Lift And Centershift Cylinder Groups{5102,5223}
1982/04/12
New Pin For Moldboard Shift Cylinder Prevents Loss During Operation{5229}
1984/06/04
Centershift Extension Groups: A Better Method To Cut A Bank Slope At A 2:1 Ratio{5229,6151}
1977/04/11
Washers Added To Articulation Cylinders Minimize Damage To Cylinder Crowns{7058,4303}
1987/05/25
New Back-up Rings For Hydraulic Cylinders{5200,5100}
1988/03/28
New Hydraulic Cylinder Washers Keep Piston Retaining Bolts Tighter{5200,5213,5223,5229,6150}
1988/05/16
New Articulation And Scarifier Cylinders Have Larger Piston Retaining Bolts{5213,7058}
1988/10/24
New Blade Lift And Centershift Cylinders Have Caps With Shims For Adjustment{5102,5223}
1979/03/12
Adjustment Procedure For Blade Lift Cylinders And Centershift Cylinders{5223,5102}
1979/03/26
Steering System Improvements Prevent Possible Damage To Steering Cylinder Sockets{4303,4304,4305,4322}
1979/08/27
Adjustable Wear Strip Kit Available For Blade Cylinder Tip Bracket {5254,5230}
1989/05/08
Hydraulic Cylinder Drift On All Caterpillar Series G Motor Graders{5050,6150,7562}
1990/04/02
New Articulation Cylinders Which Prevent Piston Bolt Loosening{5265}
1991/12/02
Improved Performance For The Thirteenth Valve{5106,5140,5212}
1992/05/25
Side Shift Cylinder Guard Group Bracket Has Been Improved To Prevent Being Bent {6154}
1993/06/14
New Side Shift Cylinder Group Used With Higher Torque On Piston Retaining Bolt{5229}
1993/07/12
Lock Valve Group With A Relief For Right Blade Lift Cylinder Is Available On Motor Graders{5102,5100}
1994/02/07
New Threaded Gland Cylinder Heads Have Stronger Seal Land{7562,4303,5102,5104,5105,5223,5229,5265,5452}
1996/11/11
Snap Ring Improves Rod Wiper Seal Retention {4303,5101,5102,5104,5213}
1999/07/12
Correction to Specifications, SENR3488 {5265}
2000/02/21
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Cat<SUP>&reg;</SUP> Reman Announces Remanufactured Cylinders For Motor Grader Applications {4303, 5102, 5106, 5211, 5213, 5223, 5229, 5265}
2015/06/05

Caterpillar Parts SIS Catalog 140G :

CYLINDER GP-BLADE TIP
9J-3466 CYLINDER GP-BLADE TIP
CYLINDER & MOUNTING GP
9D-9830 CYLINDER & MOUNTING GP
CYLINDER & MOUNTING GP
7D-9955 CYLINDER & MOUNTING GP
BLADE SIDE SHIFT CYLINDER AND MOUNTING GROUP
7D-9945 BLADE SIDE SHIFT CYLINDER AND MOUNTING GROUP
CYLINDER & MOUNTING GP
7D-9955 CYLINDER & MOUNTING GP
CYLINDER & MOUNTING GP
8D-7950 CYLINDER & MOUNTING GP
BLADE LIFT CYLINDER GROUP
8J-6380 BLADE LIFT CYLINDER GROUP
8D-5285 LIFT GP-BLADE
CYLINDER GP-BLADE SIDE SHIFT
8J-0028 CYLINDER GP-BLADE SIDE SHIFT
HYDRAULIC BLADE TIP LINES GROUP
8D-8580 HYDRAULIC BLADE TIP LINES GROUP
HYDRAULIC BLADE TIP LINES GROUP
8D-8580 HYDRAULIC BLADE TIP LINES GROUP
LINES GP-HYDRAULIC
2G-3430 LINES GP-HYDRAULIC
POWER BLADE SHIFT LINES GROUP
8D-8640 POWER BLADE SHIFT LINES GROUP
LINES GP-HYDRAULIC
2G-3450 LINES GP-HYDRAULIC
SWIVEL GP
8J-0384 SWIVEL GP
SWIVEL JOINT GP
8J-4568 SWIVEL JOINT GP

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.