AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9D6420 POWER BLADE SHIFT LINES GROUP Replaced by 2G3420 shown on Page 160. Part of 9D6405 and 9D6430 Power Blade Arrangements listed on Page 240. 8J5913 Valve and 8J4568 Swivel Joint parts are shown on Pages 138 and 159 AN ATTACHMENT 140G


HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
OPERATOR STATION
CONTROL GP-HYDRAULIC
HYDRAULIC SYSTEM
SHAFT GP
IMPLEMENTS
MOLDBOARD GP

MOTOR GRADER 140G MOTOR GRADER 72V
 140G MOTOR GRADER 72V00001-00822 (MACHINE) UEG0854S 140G 72V   (1974)

HYDRAULIC SYSTEM

LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
2G-3450 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
2G-3420 LINES GP-HYDRAULIC
POWER BLADE SHIFT LINES GROUP
9D-6420 POWER BLADE SHIFT LINES GROUP
LINES GP-HYDRAULIC
8D-8590 LINES GP-HYDRAULIC
LINES GP-HYDRAULIC
8D-8600 LINES GP-HYDRAULIC
SCARIFIER HYDRAULIC LINES GROUP
9D-2620 SCARIFIER HYDRAULIC LINES GROUP
 

#UEG0854S0310
 

9D-6420: POWER BLADE SHIFT LINES GROUP

9D6420 POWER BLADE SHIFT LINES GROUP
Replaced by 2G3420 shown on Page 160. Part of 9D6405 and 9D6430 Power Blade Arrangements listed
on Page 240. 8J5913 Valve and 8J4568 Swivel Joint parts are shown on Pages 138 and 159
AN ATTACHMENT
c165469 UEG0854S
9D6420 POWER BLADE SHIFT LINES GROUP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-5982 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 369 cm(145.3 in.)  
  8S-6417 [1] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM.  
2. 0S-1594 [2] BOLT  
3. 3B-4506 [5] LOCKWASHER  
4. 1D-4717 [2] NUT  
5. 9D-5983 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 136 cm(53.5 in.)  
  4S-5414 [2] SLEEVE  
  8S-6417 [2] COUPLING ASSEM.  
6. 030-8188 [8] CONNECTOR  
7. 3K-0360 [16] SEAL  
8. 7D-9984 [6] ELBOW  
9. 7K-1181 [1] STRAP  
10. 9D-5980 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 148 cm(57.2 in.)  
  8S-6417 C [2] COUPLING ASSEM.  
  4S-5414 C [2] SLEEVE  
11. 9D-5864 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  5P-0178 H HOSE 85 cm(33.4 in.)  
  3S-8606 [2] SLEEVE  
  8S-4055 [2] COUPLING ASSEM.  
12. 0L-1143 [3] BOLT  
13. 8J-5913 Y [1] VALVE GROUP  
    (Separate Illustration)
14. 005-4362 [2] ELBOW  
15. 4B-4283 [2] WASHER  
16. 8J-4568 Y [1] SWIVEL GROUP  
    (Separate Illustration)
17. 8D-9092 [1] PIN  
18. 3B-4629 [2] COTTER PIN  
19. 1A-1135 [4] BOLT  
  3B-4510 [4] LOCKWASHER  
20. 8D-8974 [1] GUIDE ASSEM.  
21. 5H-1625 [1] CLAMP  
22. 1S-0994 [2] CLIP  
23. 0S-1585 [1] BOLT  
  1D-4719 [1] NUT  
  3B-4508 [1] LOCKWASHER  
  031-5183 [1] SPACER  
24. 9D-5866 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 184 cm(72.44 in.)  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
25. 9D-5871 [1] HOSE ASSEM. (not serv)  
    For service furnish:
  5P-0178 H HOSE 141 cm(55.46 in  
  8S-6417 [2] COUPLING ASSEM.  
  4S-5414 [2] SLEEVE  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE CENTIMETRE
 

#UEG0854S0311
 

9D-6985: BLADE CONTROL ARRANGEMENT

9D6985 BLADE CONTROL ARRANGEMENT--12 Ft.
Replaced by 2G6319 shown on Page 162A. AN ATTACHMENT
UEG0854S0311 UEG0854S
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7D-9945 Y [1] MOUNTING AND BLADE SHIFT CYLINDER GROUP  
  7D-9955 Y [1] MOUNTING AND BLADE TIP CYLINDER GROUP  
  8D-0170 Y [1] SKID SHOE FOLLOWER GROUP  
  8D-8580 Y [1] BLADE TIP LINES GROUP  
    - OR -
  2G-3430 Y [1] BLADE TIP LINES GROUP  
  8D-8640 Y [1] BLADE SHIFT LINES GROUP  
    - OR -
  2G-3450 Y [1] BLADE SHIFT LINES GROUP  
  8D-9110 Y [1] WHEEL FOLLOWER GROUP  
  8D-9120 Y [1] WIRE FOLLOWER GROUP  
  8D-9765 Y [1] LINES AND VALVE GROUP  
  9D-1600 Y [1] CIRCLE DRIVE GROUP  
  9D-2120 Y [1] CAMDRIVE SHAFT GROUP  
    - OR -
  2G-5480 Y [1] CAMDRIVE SHAFT GROUP  
  9D-2325 Y [1] BLADE GROUP  
  9D-2345 Y [1] GRADE FOLLOWER MOUNTING GROUP  
  9D-2365 Y [1] DIAL CONTROL GROUP  
  9D-2370 Y [1] DIAL CONTROL MOUNTING GROUP  
  9D-2400 Y [1] DRAWBAR GROUP  
  9D-3855 Y [1] STABILIZER GROUP  
  9D-2440 Y [1] GRADE FOLLOWER STORAGE GROUP  
  9D-7145 Y [1] MOUNTING AND PENDULUM GROUP  
  9D-8180 Y [1] SLOPE AND GRADE WIRING GROUP  
  9D-9320 Y [1] CIRCLE GROUP  
  9D-2390 Y [1] FRONT FRAME GROUP  
    - OR -
  2G-4960 Y [1] FRONT FRAME GROUP  
  9D-4700 [1] POWER MODULE  
  Y   SEPARATE ILLUSTRATION
 

#UEG0854S0312
 

2G-6319: AUTOMATIC BLADE CONTROL ARRANGEMENT

2G6319 AUTOMATIC BLADE CONTROL ARRANGEMENT--12 Foot
AN ATTACHMENT
UEG0854S0312 UEG0854S
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7D-9955 Y [1] BLADE TIP CYLINDER AND MOUNTING GROUP  
  8D-0170 Y [1] SKID SHOE FOLLOWER GROUP  
  8D-9110 Y [1] WHEEL FOLLOWER GROUP  
  8D-9120 Y [1] WIRE FOLLOWER GROUP  
  8D-9765 Y [1] LINES AND VALVE GROUP  
  9D-1600 Y [1] CIRCLE DRIVE GROUP  
  9D-2345 Y [1] GRADE FOLLOWER MOUNTING GROUP  
  9D-2365 Y [1] DIAL CONTROL GROUP  
  9D-2370 Y [1] DIAL CONTROL MOUNTING GROUP  
  9D-2400 Y [1] DRAWBAR GROUP  
  9D-2440 Y [1] GRADE FOLLOWER STORAGE GROUP  
  9D-3855 Y [1] STABILIZER GROUP  
  9D-7145 Y [1] MOUNTING AND PENDULUM GROUP  
  9D-8180 Y [1] SLOPE AND GRADE WIRING GROUP  
  9D-9320 Y [1] CIRCLE GROUP  
  9D-9830 Y [1] BLADE SHIFT CYLINDER AND MOUNTING GROUP  
  2G-3430 Y [1] BLADE TIP LINES GROUP  
  2G-3450 Y [1] POWER BLADE LINES GROUP  
  2G-4960 Y [1] FRONT FRAME GROUP  
  2G-5480 Y [1] CAMDRIVE SHAFT GROUP  
  2G-6061 Y [1] BLADE GROUP  
  [1] TIRE GROUP FRONT (14.00 X 24)  
  9D-2474 [1] BLADE CONTROL TOOL GROUP  
  9D-4700 [1] POWER MODULE  
  Y   SEPARATE ILLUSTRATION
 

#UEG0854S0313
 

9D-6995: BLADE CONTROL ARRANGEMENT

9D6995 BLADE CONTROL ARRANGEMENT--14 Ft.
Replaced by 9D9900 shown on Page 163A
AN ATTACHMENT
UEG0854S0313 UEG0854S
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7D-9945 Y [1] MOUNTING AND BLADE SHIFT CYLINDER GROUP  
  7D-9955 Y [1] MOUNTING AND BLADE TIP CYLINDER GROUP  
  8D-0170 Y [1] SKID SHOE FOLLOWER GROUP  
  8D-8580 Y [1] BLADE TIP LINES GROUP  
    - OR -
  2G-3430 Y [1] BLADE TIP LINES GROUP  
  8D-8640 Y [1] BLADE SHIFT LINES GROUP  
    - OR -
  2G-3450 Y [1] BLADE SHIFT LINES GROUP  
  8D-9110 Y [1] WHEEL FOLLOWER GROUP  
  8D-9120 Y [1] WIRE FOLLOWER GROUP  
  8D-9570 Y [1] GRADE FOLLOWER MOUNTING GROUP  
  8D-9765 Y [1] LINES AND VALVE GROUP  
  9D-1600 Y [1] CIRCLE DRIVE GROUP  
  9D-2120 Y [1] CAMDRIVE SHAFT GROUP  
    - OR -
  2G-5480 Y [1] CAMDRIVE SHAFT GROUP  
  9D-2335 Y [1] BLADE GROUP  
  9D-2365 Y [1] DIAL CONTROL GROUP  
  9D-2370 Y [1] DIAL CONTROL MOUNTING GROUP  
  9D-2390 Y [1] FRONT FRAME GROUP  
  9D-2400 Y [1] DRAWBAR GROUP  
  9D-2440 Y [1] GRADE FOLLOWER STORAGE GROUP  
  9D-3855 Y [1] STABILIZER GROUP  
  9D-7145 Y [1] MOUNTING AND PENDULUM GROUP  
  9D-8180 Y [1] SLOPE AND GRADE WIRING GROUP  
  9D-9320 Y [1] CIRCLE GROUP  
  9D-2474 [1] BLADE CONTROL TOOL GROUP  
  9D-4700 [1] POWER MODULE  
  Y   SEPARATE ILLUSTRATION
 

#UEG0854S0314
 

9D-9900: BLADE CONTROL ARRANGEMENT

9D9900 BLADE CONTROL ARRANGEMENT--14 Ft.
AN ATTACHMENT
UEG0854S0314 UEG0854S
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7D-9955 Y [1] MOUNTING AND BLADE TIP CYLINDER GROUP  
  8D-0170 Y [1] SKID SHOE FOLLOWER GROUP  
  8D-9110 Y [1] WHEEL FOLLOWER GROUP  
  8D-9120 Y [1] WIRE FOLLOWER GROUP  
  8D-9570 Y [1] GRADE FOLLOWER MOUNTING GROUP  
  8D-9765 Y [1] LINKAGE AND VALVE GROUP  
  9D-1600 Y [1] CIRCLE DRIVE GROUP  
  9D-2365 Y [1] DIAL CONTROL GROUP  
  9D-2370 Y [1] DIAL CONTROL MOUNTING GROUP  
  9D-2400 Y [1] DRAWBAR GROUP  
  9D-2440 Y [1] GRADE FOLLOWER STORAGE GROUP  
  9D-3855 Y [1] STABILIZER GROUP  
  9D-7145 Y [1] MOUNTING AND PENDULUM GROUP  
  9D-8180 Y [1] SLOPE AND GRADE WIRING GROUP  
  9D-9320 Y [1] CIRCLE GROUP  
  9D-9760 Y [1] BLADE GROUP  
  9D-9830 Y [1] MOUNTING AND BLADE SIDE SHIFT CYLINDER GROUP  
  2G-3430 Y [1] BLADE TIP LINES GROUP  
  2G-3450 Y [1] BLADE SHIFT LINES GROUP  
  2G-4960 Y [1] FRONT FRAME GROUP  
  2G-5480 Y [1] CAMDRIVE SHAFT GROUP  
  9D-2474 [1] BLADE CONTROL TOOL GROUP  
  9D-4700 [1] POWER MODULE  
  Y   SEPARATE ILLUSTRATION
 

#UEG0854S0315
 

2G-5480: SHAFT GP-CAMDRIVE

2G5480 CAMDRIVE SHAFT GROUP
Part of 9D6985, 9D6995 and 9D9900 Blade Control Arrangements listed
on Pages 162, 163 and 163A
c157533 UEG0854S
2G5480 SHAFT GP-CAMDRIVE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-5470 [1] SHAFT GROUP  
    (Includes)
2. 9D-2146 [1] YOKE  
3. 8D-1508 [1] SPIDER & BEARING ASSEM.  
    (Includes)
4. 8D-2835 [4] RING  
5. 8D-1507 [1] YOKE  
6. 2G-5460 [1] SHAFT GROUP  
    (Includes)
7. 8D-1529 [1] YOKE  
8. 8D-1508 [1] SPIDER & BEARING ASSEM.  
    (Includes)
9. 8D-2835 [4] RING  
10. 9D-2146 [1] YOKE  
11. 8J-6220 [2] SETSCREW  
 

#UEG0854S0316
 

9D-2120: CAMDRIVE SHAFT GROUP

9D2120 CAMDRIVE SHAFT GROUP
Replaced by 2G5480 shown on Page 163B. Part of 9D6985 and 9D6995 Blade Control
Arrangements listed on Pages 162 and 163
c202438 UEG0854S
9D2120 CAMDRIVE SHAFT GROUP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9D-1579 [1] SHAFT GROUP  
    (Includes)
2. 9D-2146 [1] YOKE  
3. 8D-1508 [1] SPIDER & BEARING ASSEM.  
    (Includes)
4. 8D-2835 [4] RING  
5. 8D-1507 [1] YOKE  
6. 9D-1577 [1] SHAFT GROUP  
    (Includes)
7. 8D-1529 [1] YOKE  
8. 8D-1508 [1] SPIDER & BEARING ASSEM.  
    (Includes)
9. 8D-2835 [4] RING  
10. 9D-2146 [1] YOKE  
11. 032-0818 [2] SETSCREW  
 

#UEG0854S0317
 

8D-0170: FOLLOWER GP-SHOE

8D170 SKID SHOE FOLLOWER GROUP
Part of 9D6985, 9D6995 and 9D9900 Blade Control Arrangements listed
on Pages 162, 163 and 163A
c112685 UEG0854S
8D0170 FOLLOWER GP-SHOE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-0151 [1] BRACKET ASSEM.  
  9F-2978 [2] NUT (weld)  
2. 0L-1351 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
3. 8D-0156 [1] SHOE ASSEM.  
4. 8F-8804 [1] BOLT  
  1D-5117 [2] NUT  
 

#UEG0854S0318
 

8D-9110: FOLLOWER GP-WHEEL

8D9110 WHEEL FOLLOWER GROUP--Type 1
Part of 9D6985 and 9D6995 Blade Control Arrangements listed on
Pages 162 and 163
c118186 UEG0854S
8D9110 FOLLOWER GP-WHEEL Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-6149 [1] WHEEL ASSEM.  
2. 6D-8955 [1] GASKET  
3. 6D-3034 [7] SCREW  
4. 6D-9425 [1] PLATE  
5. 6D-5447 [1] HARNESS ASSEM.  
6. 6D-5457 [1] PLUG ASSEM.  
7. 6D-4956 [1] COVER  
8. 6D-5592 [1] POTENTIOMETER  
  6D-5589 [1] POTENTIOMETER  
9. 6D-5574 [1] PIN  
10. 6D-5583 [1] COUPLING  
11. 2D-9535 [1] GROMMET  
12. 3S-2093 [1] TIE  
13. 6D-9424 [1] HOUSING  
14. 6D-3041 [3] CLAMP  
15. 6D-3032 [3] SCREW  
16. 6D-5975 [2] BEARING  
17. 6D-4917 [1] SCREW  
18. 6D-5307 [1] SHAFT  
19. 6D-9443 [1] SHIM (.002" Thick)  
20. 6D-9444 [1] SHIM (.010 in. thick)  
21. 6D-9445 [1] SHIM (.005 in. thick)  
22. 6D-9114 [1] PLATE  
23. 8D-8278 [2] WASHER  
24. 6D-5931 [1] PIN  
25. 6F-0612 [1] NUT  
26. 4B-4276 [1] WASHER  
27. 0S-1616 [5] BOLT  
28. 1A-9579 [1] BOLT  
29. 0S-1594 [2] BOLT  
  1D-4717 [2] NUT  
  3B-4506 [2] LOCKWASHER  
30. 6D-5985 [1] TUBE ASSEM.  
  6D-9441 [1] CLAMP  
31. 7D-6751 [1] CLAMP  
32. 2D-6235 [1] NUT  
33. 8D-7982 [1] SETSCREW  
34. 9D-2169 [1] BRACKET ASSEM.  
35. 8D-7977 [1] BRACKET ASSEM.  
36. 8D-7966 [1] SETSCREW  
37. 2H-3855 [1] BOLT  
38. 3B-4508 [1] LOCKWASHER  
39. 6D-5974 [2] BEARING  
40. 8D-8279 [2] WASHER  
41. 6D-9448 [1] SHAFT  
42. 3B-4617 [1] COTTER PIN  
43. 3B-6734 [1] NUT  
44. 4B-4281 [1] WASHER  
45. 1D-4617 [1] BOLT  
  1D-5119 [2] NUT  
46. 3B-4504 [4] LOCKWASHER  
47. 8B-8245 [2] BUSHING  
48. 6D-5213 [1] YOKE ASSEM.  
 

#UEG0854S0319
 

8D-9110: FOLLOWER GP-WHEEL

8D9110 WHEEL FOLLOWER GROUP--Type 2
Part of 9D6985, 2G6319, 9D6995 and 9D9900 Blade Control Arrangements listed
on Pages 162, 162A, 163 and 163A. AN ATTACHMENT
c216156 UEG0854S
8D9110 FOLLOWER GP-WHEEL Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-6149 [1] WHEEL ASSEM.  
2. 6D-8955 [1] GASKET  
3. 6D-3034 [7] SCREW  
4. 6D-9425 [1] PLATE  
5. 6D-5447 [1] HARNESS ASSEM.  
    (Includes)
  030-9492 C [3] HOUSING (socket)  
6. 6D-5457 [1] PLUG ASSEM.  
7. 6D-4956 [1] COVER  
8. 9D-7073 C [1] POTENTIOMETER ASSEM.  
    (Includes)
9. 030-9491 C [3] HOUSING  
11. 2D-9535 [1] GROMMET  
12. 3S-2093 [1] TIE  
13. 6D-9424 [1] HOUSING  
14. 6D-3041 [3] CLAMP  
15. 6D-3032 [3] SCREW  
16. 6D-5975 [2] BEARING  
17. 9D-7072 C [1] COUPLING  
18. 6D-5307 [1] SHAFT  
19. 6D-9443 [1] SHIM 0.06 mm(.002 in.) thick  
20. 6D-9444 [1] SHIM 0.26 mm(010 in.) thick  
21. 6D-9445 [1] SHIM 0.13 mm(.005 in.) thick  
22. 6D-9114 [1] PLATE  
23. 8D-8278 [2] WASHER  
24. 9D-7112 [1] PIN  
25. 6F-0612 [1] NUT  
26. 4B-4276 [1] WASHER  
27. 0S-1616 [5] BOLT  
28. 1A-9579 [1] BOLT  
29. 0S-1594 [2] BOLT  
  1D-4717 [2] NUT  
  3B-4506 [2] LOCKWASHER  
30. 6D-5985 [1] TUBE ASSEM.  
  6D-9441 C [1] CLAMP  
31. 7D-6751 [1] CLAMP  
32. 2D-6235 [1] NUT  
33. 8D-7982 [1] SETSCREW  
34. 9D-2169 [1] BRACKET ASSEM.  
35. 8D-7977 [1] BRACKET ASSEM.  
36. 8D-7966 [1] SETSCREW  
37. 2H-3855 [1] BOLT  
38. 3B-4508 [1] LOCKWASHER  
39. 6D-5974 [2] BEARING  
40. 8D-8279 [2] WASHER  
41. 6D-9448 [1] SHAFT  
42. 3B-4617 [1] COTTER PIN  
43. 3B-6734 [1] NUT  
44. 4B-4281 [1] WASHER  
45. 1D-4617 [1] BOLT  
  1D-5119 [2] NUT  
46. 3B-4504 [4] LOCKWASHER  
47. 8B-8245 [2] BUSHING  
48. 6D-5213 [1] YOKE ASSEM.  
  C   INDICATES CHANGE
 

Information:

Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
New Hose Couplings Are Now Used{0684, 5057, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Technical Information Bulletin
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
Some Hydraulic Couplings are Identified with an Incorrect Part Number{5057}
The Flange Head on <NOBR>442-5593</NOBR> Coupling As May Have Been Manufactured Incorrectly {5057}
The Flange Head on 442-5593 Coupling As May Have Been Manufactured Incorrectly {5057}
Tool Operating Manual
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
358-4528 (380/480 V, 50/60 Hz, 3 Phase), 457-6040 (230V, 60 Hz, Single Phase) , 457-6039 (230V, 50 Hz, Single Phase) Hose Machine Group Set-Up and Operation{0599, 0684}
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
242-3567 Variable Crimp Die Bowl{0684}
242-3567 Variable Crimp Die Bowl{0684}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Crimping Caterpillar 1E294, 1E716, 1E844 Hose and Couplings {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 209-3153 Portable Hose Machine {0374, 0599, 0684, 0738, 5057}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Converting 137-7238 Hose Assembly Machines and 134-5640 Hose Assembly Machines (100 Ton) from Sony Control to Crimputer Control{0374, 0599, 0684, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Set up and Basic Operation of the 145-5161 Floor Model Hose Machine {0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Using the 9U-5792, 4C-5052, 4C-5054, 4C-3670, and 4C-3680 Hydraulic Hose Machines{0374, 0599, 0684, 0738, 5057}
Reuse And Salvage Guidelines
Crimputer III Setup and Operation{0684, 5057}
Crimputer III Setup and Operation{0684, 5057}
Contamination Control Guidelines
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Hose Products Reference Guide {0374, 0599, 0684, 0738, 5057}
Service Magazine
New Valve Group Used In Hydraulic Lines Group To Give Protection To Hydraulic Circuits{5235,5057}
1978/08/07
Color Coded Dust Caps for S&middot;O&middot;S Ports Will Be Available {7770}
2003/12/01
Information Release Memo, HOS04-02, "XT-6 Hose and Couplings to XT-6 ES Components" Is Available {5057}
2004/06/21
Information Release Memo, PELJ0340 , "Reusable Couplings for Caterpillar -12 and -16 XT-6 ES Hose" {5057}
2004/06/28
Five New Wrenches Remove Snap To Connect Couplings from Hydraulic Hose Assemblies {0602, 0738, 5057}
2006/02/13
Caterpillar Hose and Coupling Practices {0618, 1000, 5057, 7000}
2008/05/26
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}
Hydraulic Hose Suppression Sleeves for Certain Machines are Now Available {5057}

Caterpillar Parts SIS Catalog 140G :

LINES GP-HYDRAULIC
2G-3420 LINES GP-HYDRAULIC
SWIVEL JOINT GP
8J-4568 SWIVEL JOINT GP
SWIVEL GP
8J-0384 SWIVEL GP
LINES GP-HYDRAULIC
2G-3450 LINES GP-HYDRAULIC
POWER BLADE SHIFT LINES GROUP
8D-8640 POWER BLADE SHIFT LINES GROUP
LINES GP-HYDRAULIC
2G-3430 LINES GP-HYDRAULIC
HYDRAULIC BLADE TIP LINES GROUP
8D-8580 HYDRAULIC BLADE TIP LINES GROUP
HYDRAULIC BLADE TIP LINES GROUP
8D-8580 HYDRAULIC BLADE TIP LINES GROUP
9D-6985 BLADE CONTROL ARRANGEMENT
2G-6319 AUTOMATIC BLADE CONTROL ARRANGEMENT
9D-6995 BLADE CONTROL ARRANGEMENT
9D-9900 BLADE CONTROL ARRANGEMENT
SHAFT GP-CAMDRIVE
2G-5480 SHAFT GP-CAMDRIVE
CAMDRIVE SHAFT GROUP
9D-2120 CAMDRIVE SHAFT GROUP
FOLLOWER GP-SHOE
8D-0170 FOLLOWER GP-SHOE
FOLLOWER GP-WHEEL
8D-9110 FOLLOWER GP-WHEEL

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.