9D8180 SLOPE AND GRADE WIRING GROUP--Part 2--Type 3 Part of 9D6985, 9D6995 and 9D9900 Blade Control Arrangements listed on Pages 162, 163 and 163A 140G

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 9D-8180 SLOPE AND

HYDRAULIC SYSTEM

PENDULUM GP

1. 9D-7145 PENDULUM &

OPERATOR STATION

CONTROL GP-HYDRAULIC

2. 9D-2370 DIAL CONTR
3. 9D-2365 DIAL GP-CO
4. 9D-2365 DIAL GP-CO

WORK TOOLS

BLADE GP

5. 9D-3855 STABILIZER

HYDRAULIC SYSTEM

CYLINDER GP

6. 8D-3310 CYLINDER &

VALVE GP-RELIEF

7. 9J-0630 RELIEF VAL

LINES GP-STEERING

8. 8D-8610 LINES GP-S
9. 8D-8610 LINES GP-S
0. INFORMATION

MOTOR GRADER 140G MOTOR GRADER 72V
140G MOTOR GRADER 72V00001-00822 (MACHINE) UEG0854S 140G 72V (1974)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

9D-8180 SLOPE AND GRADE WIRING GROUP

9D-5675 BULLDOZER WIRING GROUP

9D-5461 HARNESS ASSEMBLY

9D-8707 HARNESS ASSEMBLY

#UEG0854S0330

9D-8180: SLOPE AND GRADE WIRING GROUP

SLOPE AND GRADE WIRING GROUP

9D8180 SLOPE AND GRADE WIRING GROUP--Part 2--Type 3
Part of 9D6985, 9D6995 and 9D9900 Blade Control Arrangements listed on Pages 162, 163 and 163A

c158195 UEG0854S

9D8180 SLOPE AND GRADE WIRING GROUP Parts scheme

For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9D-4234	[1]	HARNESS ASSEM.
			(Includes)
	5P-5629 CH		WIRE (14 gauge)
	2L-8076	[1]	TERMINAL (ground)
	4L-3916	[1]	TERMINAL (socket)
2.	5K-3294	[3]	CLIP
	0S-1620	[1]	BOLT
	3B-4508	[1]	LOCKWASHER
	4B-4280	[1]	WASHER
3.	4D-8123	[3]	CLIP
4.	3B-4506	[5]	LOCKWASHER
5.	9D-5429	[1]	HARNESS ASSEM.
6.	4D-7794	[3]	CLIP
7.	9D-5431	[1]	HARNESS ASSEM.
8.	8K-1433	[1]	GROMMET
9.	8D-9537	[2]	CAP ASSEM.
	6D-3032	[8]	SCREW
10.	8D-7955	[1]	HARNESS ASSEM.
11.	3S-2093	[18]	TIE
12.	9D-6720	[1]	JUNCTION BOX GROUP
			(Includes)
	9D-5831	[1]	BOX
	7D-6915	[16]	SCREW
	6D-3982	[16]	NUT
13.	4B-4278	[7]	WASHER
14.	9D-8066	[1]	PLATE
15.	0S-1614	[4]	BOLT
	3B-4504	[4]	LOCKWASHER
16.	0S-0509	[4]	BOLT
17.	2G-2192	[2]	COVER
18.	0T-0102	[1]	BOLT
	C		INDICATES CHANGE
	H		ORDER BY THE METRE

#UEG0854S0331

9D-7145: PENDULUM & MOUNTING GP

PENDULUM & MOUNTING GP

9D7145 PENDULUM MOUNTING GROUP
Part of 9D6985, 9D6995 and 9D9900 Blade Control Arrangements listed on Pages 162, 163 and 163A
9D7160 Pendulum parts are shown on Page 169

c209854 UEG0854S

9D7145 PENDULUM & MOUNTING GP Parts scheme

For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6D-3059	[1]	DISC
2.	6D-3031	[3]	SCREW
3.	9D-4649	[1]	SEAL
4.	5F-8916	[1]	LOCK
5.	6D-3057	[1]	NUT
6.	9D-9858 C	[1]	YOKE
7.	9D-7133	[1]	ARBOR ASSEM.
			(Includes)
8.	6D-3058	[1]	KEY
9.	5P-3355	[2]	PIN
10.	6D-3023	[4]	BEARING
11.	5P-1905	[4]	BOLT
12.	8D-9936	[1]	HOUSING
13.	9D-4575	[1]	RING
14.	6D-3063	[1]	CUP ASSEM.
15.	9D-4613	[1]	HOUSING
16.	6D-3045	[1]	SPRING
17.	6D-3060	[1]	DISC
18.	6D-7163	[1]	FLANGE ASSEM.
			(Includes)
19.	6D-3907	[2]	DOWEL
20.	9D-7160 Y	[1]	PENDULUM GROUP
			(Separate Illustration)
21.	034-3223	[1]	SCREW
22.	3H-1118	[2]	PIN
23.	9D-0439	[2]	BOLT
	6L-6817	[2]	LOCKWASHER
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION

#UEG0854S0332

9D-2370: DIAL CONTROL MOUNTING GROUP

DIAL CONTROL MOUNTING GROUP

9D2370 DIAL CONTROL MOUNTING GROUP
Part of 9D6985 and 9D6995 Blade Control Arrangements listed on Pages 162 and 163

c148725 UEG0854S

9D2370 DIAL CONTROL MOUNTING GROUP Parts scheme

For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9D-4811	[1]	TUBE ASSEM.
			(Includes)
2.	1L-5821	[1]	ELBOW
3.	9D-4824	[1]	RING
4.	9D-4826	[1]	PLATE
5.	9D-4827	[1]	GROMMET
6.	5P-1835	[3]	SCREW
	1J-8314	[3]	LOCKWASHER
7.	9D-4819	[2]	SETSCREW
	2M-8075	[2]	NUT
8.	9D-4823	[1]	RECEPTACLE
9.	6B-4541	[4]	SCREW
	6B-4542	[4]	LOCKWASHER
10.	9D-4822	[1]	KNOB ASSEM.
			(Includes)
11.	6H-3956	[1]	PIN
12.	9K-8024	[1]	STUD
13.	9D-4814	[1]	TUBE ASSEM.
			(Includes)
14.	7F-5462	[1]	LUG
15.	9D-4821	[1]	KNOB
16.	9D-8532	[1]	DAMPER
17.	9D-8511	[1]	SCREW ASSEM.
18.	9D-4818	[1]	TUBE ASSEM.
			(Includes)
19.	7B-5710	[1]	BOSS
20.	8F-9836	[2]	LUG
21.	0S-1595	[4]	BOLT
	3B-4508	[4]	LOCKWASHER
	8B-3115	[12]	SHIM

#UEG0854S0333

9D-2365: DIAL GP-CONTROL

DIAL GP-CONTROL

9D2365 DIAL CONTROL GROUP--Part 1
Part of 9D6985, 2G6319, 9D6995 and 9D9900 Blade Control Arrangements listed on
Pages 162, 162A, 163 & 163A. AN ATTACHMENT

c226091 UEG0854S

For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9D-4184	[2]	POTENTIOMETER
2.	9D-4176	[2]	LOCK
3.	9D-4331	[1]	POTENTIOMETER
4.	4M-5283	[6]	BOLT
	1L-4789	[6]	LOCKWASHER
5.	9D-2558	[1]	PLATE
6.	9D-2557	[1]	HOUSING
7.	9D-4187	[1]	COUPLING ASSEM.
8.	9D-4194	[1]	WASHER
9.	8D-4333	[2]	SCREW
10.	9D-2556	[1]	SHAFT
11.	9D-2562	[1]	KNOB ASSEM.
12.	4B-9806	[5]	SETSCREW
13.	9D-4196	[2]	BEARING
14.	9D-4202	[1]	WORM
15.	9D-4207	[1]	SPROCKET (32 teeth)
16.	8D-9636	[1]	TAPE
17.	9D-4197	[4]	BEARING
18.	9D-4183	[2]	BOX ASSEM.
19.	9D-2553	[2]	BOLT
20.	4F-2320	[3]	WASHER
21.	1B-8701	[1]	KEY
22.	9D-4198	[2]	BEARING
23.	9D-4190	[1]	GEAR ASSEM. (30 teeth)
			(Includes)
	2L-5894	[1]	PIN
24.	9D-9395	[1]	BOARD
	9D-9396	[2]	SPACER
	9D-4336	[4]	SPACER
25.	032-5462	[2]	SCREW
	8F-1434	[2]	LOCKWASHER
26.	9D-9392	[1]	BOARD (terminal)
27.	6D-8498	[2]	SCREW
28.	9D-9394	[1]	BOARD
29.	9D-4325	[16]	TEST JACK
30.	7D-6915	[8]	SCREW
31.	6D-3982	[8]	NUT
32.	9D-4319	[4]	CARD GUIDE
33.	9D-9393	[1]	BOARD
34.	9D-9387	[4]	CLAMP
35.	7S-1197	[3]	SCREW
36.	6D-5801	[6]	NUT
37.	9D-4326 C	[2]	CONNECTOR
	9D-6862	[2]	KEY
38.	9D-4334	[1]	COMPUTER MODULE
39.	1H-2203	[6]	SCREW ASSEM.
40.	9D-4337	[4]	SCREW
41.	9D-5152	[1]	CONNECTOR ASSEM.
42.	9D-5147	[2]	INSULATOR
43.	9D-4329	[1]	TRANSISTOR
44.	9D-8716	[1]	TRANSISTOR
45.	9D-4204	[1]	HEAT SINK
46.	9D-9388	[2]	CLAMP
47.	2N-3475	[6]	SCREW
	4B-2041	[6]	NUT
	9D-5148	[6]	INSULATOR
48.	6D-5316	[1]	TRANSISTOR
	9D-5146	[1]	INSULATOR
49.	4B-1232	[2]	SCREW
	3B-4502	[2]	LOCKWASHER
50.	3D-2992	[1]	SEAL
	C		INDICATES CHANGE

#UEG0854S0334

9D-2365: DIAL GP-CONTROL

DIAL GP-CONTROL

9D2365 DIAL CONTROL GROUP--Part 2
Part of 9D6985, 2G6319, 9D6995 and 9D9900 Blade Control Arrangements listed on
Pages 162, 162A, 163 & 163A. AN ATTACHMENT

c226092 UEG0854S

For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6D-3982	[4]	NUT
2.	3H-3627 C	[2]	SCREW
3.	6D-5801	[3]	NUT
4.	9D-9389	[1]	CLAMP
5.	9D-4192	[1]	PLATE
	9D-4193	[1]	GASKET
6.	4B-2049	[3]	NUT
7.	9D-4201	[1]	POINTER
8.	9D-4195	[1]	PLATE
9.	9D-4191	[4]	SWITCH (toggle)
	7D-5939	[4]	SEAL
10.	8D-8994	[1]	DIAL GROUP
			(Includes)
	2G-2505 C	[1]	CAP
11.	9D-0005	[2]	KNOB
	9D-4338	[4]	SETSCREW
12.	7S-1197	[2]	SCREW
13.	9D-4206	[1]	PLATE
14.	8D-7712	[3]	SCREW
15.	6D-5327	[1]	LIGHT ASSEM. (indicator)
	9D-4185	[1]	BULB
16.	9D-4203	[1]	METER
17.	9D-9391	[1]	BOARD
18.	9D-9388	[2]	CLAMP
19.	7N-2349 C	[1]	SWITCH (3 position)
20.	9D-4331	[1]	POTENTIOMETER
21.	7N-2350 C	[1]	SWITCH (4 position)
	C		INDICATES CHANGE

#UEG0854S0335

9D-3855: STABILIZER GP

STABILIZER GP

9D3855 STABILIZER GROUP
Part of 9D6985 and 9D6995 Blade Control Arrangements
listed on Pages 162 and 163

c202431 UEG0854S

For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2S-9255	[8]	SCREW
	6D-3982	[8]	NUT
2.	9D-3951	[2]	ACCELEROMETER
3.	9D-4157	[2]	PLATE
4.	0S-1614	[8]	BOLT
	3B-4504	[8]	LOCKWASHER
5.	7D-5473	[4]	SCREW
	3B-4501	[4]	LOCKWASHER
6.	9D-6316	[1]	ARM ASSEM. (L.H.)
			(Includes)
7.	8D-8168	[1]	BEARING
8.	7D-8889	[1]	BEARING
9.	9D-6317	[1]	ARM ASSEM. (R.H.)
			(Includes)
10.	8D-8168	[1]	BEARING
11.	7D-8889	[1]	BEARING

#UEG0854S0336

8D-3310: CYLINDER & MOUNTING GP

CYLINDER & MOUNTING GP

8D3310 STEERING CYLINDER AND MOUNTING GROUP
8J5538 and 8J8820 Steering Cylinder parts are shown
on Pages 180 and 181

c202455 UEG0854S

8D3310 CYLINDER & MOUNTING GP Parts scheme

For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0L-1351 C	[2]	BOLT
	3B-4506	[2]	LOCKWASHER
2.	8J-5538	[1]	CYLINDER GROUP (R.H.)
	8J-8820 Y	[1]	CYLINDER GROUP (L.H.)
			(Separate Illustration)
3.	3B-4618 C	[2]	PIN
4.	8D-2811	[2]	WASHER
5.	7D-8913	[2]	SOCKET
			(Each Includes)
6.	2F-8057	[1]	NUT
7.	2H-3786	[2]	NUT
8.	8D-2429	[2]	PIN ASSEM.
9.	8D-2638	[4]	SPACER
	C		INDICATES CHANGE
	Y		SEPARATE ILLUSTRATION

#UEG0854S0337

9J-0630: RELIEF VALVE GROUP

RELIEF VALVE GROUP

9J630 RELIEF VALVE GROUP
Part of 8D8610 Steering Lines Group shown on Page 179

c219887 UEG0854S

For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-7470 C	[6]	SHIM 1.2192 mm(.048 in.) thick
	3J-7473 C	[20]	SHIM .1270 mm(.005 in.) thick
2.	9S-4187	[2]	PLUG
3.	3K-0360	[5]	SEAL
4.	4F-7115 C	[2]	SPRING
5.	1J-8497	[2]	VALVE
6.	9S-8004	[2]	PLUG
	3J-1907	[2]	SEAL
7.	6J-1038	[4]	SEAL
8.	4J-0519	[2]	SEAL
9.	8J-9300	[1]	MANIFOLD
10.	9S-8005	[3]	PLUG
11.	8J-9301	[1]	BODY
12.	1D-4566	[4]	BODY
	3B-4508	[4]	LOCKWASHER
13.	8J-6334 C	[2]	SEAT
	C		INDICATES CHANGE

#UEG0854S0338

8D-8610: LINES GP-STEERING OIL

LINES GP-STEERING OIL

8D8610 STEERING LINES GROUP--Part 1

c207146 UEG0854S

8D8610 LINES GP-STEERING OIL Parts scheme

For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3M-0496 C	[2]	STUD
	1D-4717	[2]	NUT
2.	5P-1075 C	[18]	WASHER
3.	2B-0941	[4]	SPACER
4.	9D-1209	[2]	PLATE
5.	6D-3386	[3]	SHIM
6.	0S-1590	[2]	BOLT
7.	030-8188	[4]	CONNECTOR
8.	3K-0360	[7]	SEAL
9.	9D-6001	[1]	HOSE ASSEM. (not serv)
			For service furnish:
	5P-0178 H		HOSE 136 cm(53.54 in.)
	4S-5414	[2]	SLEEVE
	1P-9919	[2]	COUPLING ASSEM.
10.	7K-1181 C	[2]	STRAP
11.	005-4362	[3]	ELBOW
12.	9D-6002	[1]	HOSE ASSEM. (not serv)
			For service furnish:
	5P-0178 H		HOSE 156 cm(61.41 in.)
	4S-5414	[2]	SLEEVE
	8S-6417	[1]	COUPLING ASSEM. (straight)
	1P-9919	[1]	COUPLING ASSEM. (45 degrees)
13.	6D-4247	[1]	CLIP
14.	0L-1351	[13]	BOLT
15.	8D-9569	[2]	PLATE
16.	9D-6003	[2]	HOSE ASSEM. (not serv)
			For service of each furnish:
	5P-0178 H		HOSE 655 cm(257.87 in.)
	4S-5414	[2]	SLEEVE
	1P-9919	[1]	COUPLING ASSEM. (45 degrees)
	8S-6417	[1]	COUPLING ASSEM. (straight)
17.	8D-9547	[2]	PLATE
18.	9D-5262	[2]	CLAMP
19.	0S-0509	[1]	BOLT
20.	1S-0994	[1]	CLIP
	C		INDICATES CHANGE
	H		ORDER BY THE CENTIMETRE

#UEG0854S0339

8D-8610: LINES GP-STEERING OIL

LINES GP-STEERING OIL

8D8610 STEERING LINES GROUP--Part 2
9J630 Valve parts are shown on Page 177

c207147 UEG0854S

For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9D-6005	[2]	HOSE ASSEM. (not serv)
			For service of each furnish:
	5P-0178 H		HOSE 75 cm(29.53 in.)
	8S-6417	[1]	COUPLING ASSEM. (straight)
	4S-5414	[2]	SLEEVE
	8S-6393	[1]	COUPLING ASSEM. (90 degrees)
2.	9D-2547	[1]	JUNCTION BLOCK
3.	0T-0573	[2]	BOLT
4.	5P-1075 C	[6]	WASHER
5.	9S-8005	[2]	PLUG
6.	3K-0360	[12]	SEAL
7.	9D-5995	[1]	HOSE ASSEM. (not serv)
			For service furnish:
	5P-0178 H		HOSE 30 cm(11.81 in.)
	4S-5414	[2]	SLEEVE
	8S-6393	[2]	COUPLING ASSEM.
8.	5B-9603	[2]	BOLT
9.	9J-0630 Y	[1]	VALVE GROUP (relief)
			(Separate Illustration)
10.	6D-4247	[2]	CLIP
11.	0T-0102	[2]	BOLT
	1D-4717	[2]	NUT
12.	1S-0994	[2]	CLIP
13.	9D-6004	[2]	HOSE ASSEM. (not serv)
			For service of each furnish:
	5P-0178 H		HOSE 83 cm(32.68 in.)
	8S-6393	[1]	COUPLING ASSEM. (90 degrees)
	4S-5414	[2]	SLEEVE
	8S-6417	[1]	COUPLING ASSEM. (straight)
14.	005-4362	[2]	ELBOW
15.	030-8188	[8]	CONNECTOR
	H		ORDER BY THE CENTIMETRE
	Y		SEPARATE ILLUSTRATION
	C		INDICATES CHANGE

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}
Use of the 4C6534 Speed Switch Calibration Harness{0781, 0785}

Installation Of 9G6981 And 7T8000 Voltage Converter Assemblies{1421}
Installation Of 9G6981 And 7T8000 Voltage Converter Assemblies{1421}

Installation of Electrical Connectors at The Articulation Joint{1408}
Installation of Electrical Connectors at The Articulation Joint{1408}

Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}

Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Replacement Relays Available{4493}
Service Replacement Relays Available{4493}

Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}

Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}
Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}

Service Letter-NACD

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher

A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412}
A Procedure Is Available to Adapt the Glow Plug Harness to Certain Engines{1403, 1412}

Specifications

Glow Plug Positioning<BR> (PC Engines)
3306 VEHICULAR ENGINE

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Service Letter-Asia

Systems Operation

Switches
Electronic Monitoring System

Action Lamp
Electronic Monitoring System

Action Alarm
Electronic Monitoring System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock
Certain 7N4160 Switch Groups And 9W1077 Switch Assemblies Need To Be Removed From Parts Stock

Testing and Adjusting

System Schematic
Machine Security System

Electrical Connector - Inspect
Machine Security System

Electrical Connector - Inspect
Product Link - PL522/523

Wiring Harness (Open Circuit) - Test
Product Link - PL522/523

Wiring Harness (Short Circuit) - Test
Product Link - PL522/523

Electrical Connector - Inspect
Product Link 121S/300

Wiring Harness (Open Circuit) - Test
Product Link 121S/300

Wiring Harness (Short Circuit) - Test
Product Link 121S/300

System Schematic
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
Electronic Monitoring System

Wiring Harness (Short Circuit) - Test
Electronic Monitoring System

Electrical Connector - Inspect
Electronic Monitoring System

Troubleshooting

Electrical Component and Connector Locations
Machine Security System

MID 122 - CID 0269 - FMI 03
Product Link 121S/300

MID 122 - CID 0269 - FMI 04
Product Link 121S/300

Cat Data Link - Test
MSS3s Machine Security System

Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System

Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System

Connector Locations
MSS3s Machine Security System

Connector Contact Description
MSS3s Machine Security System

Electrical Connector - Inspect
MSS3s Machine Security System

Action Alarm Does Not Sound
Electronic Monitoring System

Action Alarm Is On Continuously
Electronic Monitoring System

Action Alarm Sounds with Engine Off
Electronic Monitoring System

Action Lamp Does Not Flash
Electronic Monitoring System

Action Lamp Is On Continuously
Electronic Monitoring System

Test Switch
Electronic Monitoring System

Disassembly and Assembly

Fuse Panel
12G, 14G, 16G, 120G, 130G & 140G MOTOR GRADERS OPERATOR'S ST

Batteries
3304 & 3306 VEHICULAR ENGINES FOR 12G, 14G, 120G, 130G & 140

Batteries
3304 & 3306 VEHICULAR ENGINES FPR 14G. 12G, 120G, 130G, & 12

Service Magazine

Dirty Batteries Cause Light In LED's Of EMS Panel With Disconnect Switch Off{7490,1401}
1981/09/21

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

Maintenance Free Batteries{1401}
1986/03/10

New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10

Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01

Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11

5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23

Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04

Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04

Testing The Starter On The Engine{1401,1450}
1987/05/04

New Glow Plug Wiring Harness Prevents Short Circuit{1403}
1978/08/07

Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14

Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20

Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12

Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29

Shorter Mounting Bolts Used For Glow Plug Wiring{1403,1412}
1979/05/21

Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22

Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05

Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26

High Performance Maintenance Free Battery Available{1401}
1989/01/16

Limitations On Engine Cranking Time{1453,1401}
1989/03/27

How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27

Preventive Maintenance For Batteries{1401}
1989/03/27

Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24

Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01

Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01

Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19

All Wheel Drive System Disabled For Shipping Purposes{7500}
1989/07/03

Correct Mounting And Maintenance Of Amber Rotating Warning Lamp Group {1431,7530}
1990/10/22

Correct Handling And Replacement of 3T6962 Pressure Switch Assembly{7332}
1990/12/10

New Hydraulic Oil Temperature Switch Harness Assembly Used {1408,1402,5731,5734,7413,7488,7490,7553,7556}
1991/07/22

Correct Mounting Of 2M9346 Pressure Switch (Stop Lamp Switch) {1400}
1991/10/21

Fitting Needed To Install New Oil Pressure Switch When Replacing Former Switches{7485}
1991/11/25

Wiring Harness Conduit Component Sizes {1408}
1995/02/13

New Pressure Switch Assembly Is Available For Fuel Applications; 9G-8011 Pressure Switch Assembly Should Not Be Used In Fuel Applications {7414}
1996/02/12

Integral Connector Now Used On The Air Conditioning Condenser Fan Motor Relay Assembly{1408,7320}
1996/04/29

Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07

Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10

Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26

Procedure for the Removal of the Pressure Gauges for the All Wheel Drive Arrangement {1408}
2000/11/13

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2000/10/09

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

An Improved Starting Motor Is Used on Certain C7 Machine Engines {1408, 1453}
2014/06/06

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 140G :

9D-8180 SLOPE AND GRADE WIRING GROUP

9D-7160 PENDULUM GROUP

9D-2440 STORAGE GP-FOLLOW

9D-2345 MOUNTING GP-GRADE FOLLOWER

9D-7145 PENDULUM & MOUNTING GP

9D-2370 DIAL CONTROL MOUNTING GROUP

9D-2365 DIAL GP-CONTROL

9D-3855 STABILIZER GP

8D-3310 CYLINDER & MOUNTING GP

9J-0630 RELIEF VALVE GROUP

8D-8610 LINES GP-STEERING OIL

Truck sale:

Caterpillar 140G
- motor graders
ZIEGLER CAT

68,000

Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT

225,000

Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.

247,000

Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.

69,000

Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT