AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

130G MOTOR GRADER 74V00001-00587 (MACHINE) WORK TOOLS Caterpillar SIS



MOTOR GRADER 130G MOTOR GRADER 74V
 130G MOTOR GRADER 74V00001-00587 (MACHINE) UEG0860S 130G 74V   (1975)

Parts group 130G:

  For full view, you need register
WORK TOOLS
BLADE GP
LIFT GP-BLADE
8D-5285 LIFT GP-BLADE
8D5285 BLADE LIFT GROUP--Part 1 of 2
8D-5285 LIFT GP-BLADE
8D5285 BLADE LIFT GROUP--Part 2 of 2
9D-8860 MECHANICAL RAIL BLADE ARRANGEMENT
9D8860 MECHANICAL RAIL BLADE ARRANGEMENT
AN ATTACHMENT
2G-0450 BLADE AR
2G450 POWER BLADE ARRANGEMENT--14 Foot
AN ATTACHMENT
2G-0440 BLADE & TIP AR
2G440 POWER BLADE AND TIP ARRANGEMENT--14 Foot
AN ATTACHMENT
9D-6395 POWER BLADE ARRANGEMENT
9D6395 POWER BLADE ARRANGEMENT--12 FT.
AN ATTACHMENT
9D-6450 POWER BLADE ARRANGEMENT
9D6450 POWER BLADE ARRANGEMENT--14 FT.
REPLACEMENT BY 2G450 SHOWN ON PAGE 228B
AN ATTACHMENT
9D-6470 POWER BLADE AND TIP ARRANGEMENT
9D6470 POWER BLADE AND TIP ARRANGEMENT--12 FT
AN ATTACHMENT
9D-6475 POWER BLADE AND TIP ARRANGEMENT
9D6475 POWER BLADE AND TIP ARRANGEMENT--14 FT.
REPLACED BY 2G440 SHOWN ON PAGE 228B
AN ATTACHMENT
BLADE GP
9D-3380 BLADE GP
9D3380 BLADE GROUP
Part of 9D8860 Mechanical Rail Arrangement listed on Page 228
BLADE GROUP
9D-1605 BLADE GROUP
9D1605 BLADE GROUP
Part of 9D6395 Power Blade Arrangement and 9D6470 Power Blade and Tip Arrangement listed on Page 229
BLADE GROUP
9D-6495 BLADE GROUP
9D6495 BLADE GROUP--14 Foot
Replaced by 2G400 shown on Page 232A
Part of 9D6450 Power Blade Arrangement and 9D6475 Power Blade and Tip Arrangement listed on Page 229
AN ATTACHMENT
BLADE GROUP
2G-0400 BLADE GROUP
2G400 BLADE GROUP--14 Foot
Part of 2G440 and 2G450 Blade Arrangements listed on Page 228B
AN ATTACHMENT
BLADE GP
9D-0740 BLADE GP
9D740 BLADE GROUP--12 Foot
5D-3061 BLADE EXTENSION GROUP,BLADE EXTENSION GROUP
5D3061 BLADE EXTENSION GROUP--2 Foot--R.H.
5D3062 BLADE EXTENSION GROUP--2 Foot--L.H.
BLADE EXTENSION GROUP,BLADE EXTENSION GROUP
5D-3062 BLADE EXTENSION GROUP,BLADE EXTENSION GROUP
5D3061 BLADE EXTENSION GROUP--2 Foot--R.H.
5D3062 BLADE EXTENSION GROUP--2 Foot--L.H.
EXTENSION GP-BLADE
9D-4924 EXTENSION GP-BLADE
9D4924 BLADE EXTENSION GROUP--2 Foot--R.H.
FOR USE WITH POWER BLADE
AN ATTACHMENT
EXTENSION GP-BLADE
9D-4925 EXTENSION GP-BLADE
9D4925 BLADE EXTENSION GROUP--2 Foot--L.H.
FOR USE WITH POWER BLADE
AN ATTACHMENT
GROUND ENGAGING TOOLS (G.E.T.)
TOOTH GP-SCARIFIER
8J-1434 TOOTH GP-SCARIFIER
8J1434 TOOTH GROUP
Serial No. 26V1 to 26V867 inclusive
Also part of 8J7585 130G Ripper Arrangement shown on Page 225
TOOTH GP-SCARIFIER
8J-1434 TOOTH GP-SCARIFIER
8J1434 TOOTH GROUP
Serial No. 26V868-Up
Also part of 8J7585 130G Ripper Arrangement shown on Page 225
TOOTH GP-SCARIFIER
4K-3330 TOOTH GP-SCARIFIER
4K3330 RIPPER-SCARIFIER TOOTH GROUP--9 Teeth
Serial No. 26V1-Up. AN ATTACHMENT
CUTTING EDGE REPLACEMENT GROUPS
CUTTING EDGE REPLACEMENT GROUPS--Curved
7D6255 FOR USE WITH 14 FOOT BLADE
Only separate parts serviced. AN ATTACHMENT
CUTTING EDGE REPLACEMENT GROUPS
CUTTING EDGE REPLACEMENT GROUPS--Curved
7D6265 FOR USE WITH 12 FOOT BLADE
Only separate parts serviced. AN ATTACHMENT
BIT & CUTTING EDGE GP
9D-6780 BIT & CUTTING EDGE GP
9D6780 CUTTING AND END BIT EDGE GROUP--12 Foot
Only separate parts serviced. AN ATTACHMENT
CUTTING AND END BIT EDGE GROUP
9D-6770 CUTTING AND END BIT EDGE GROUP
9D6770 CUTTING AND END BIT EDGE GROUP--14 Foot
AN ATTACHMENT
7D-6671 BIT GP-END
FOR USE WITH 6 INCH WIDTH CURVED EDGE ONLY
RIPPER GP
8J-7586 RIPPER AR
8J7586 130G RIPPER ARRANGEMENT
AN ATTACHMENT
MOUNTING GP-RIPPER
8J-6995 MOUNTING GP-RIPPER
8J6995 RIPPER MOUNTING GROUP
Part of 8J7586 130G Ripper Arrangement
RIPPER AR
8J-7585 RIPPER AR
8J7585 RIPPER ARRANGEMENT
Serial No. 26V1-Up. Part of 8J7586 130G Ripper Arrangement listed on Page 224
8J1434 Tooth parts are shown on Page 228. Note: One or Two 8J1434 Tooth Groups may be added
to convert to a Four or Five Tooth Ripper
SCARIFIER GP
9D-5470 VEE SCARIFIER ARRANGEMENT
9D5470 VEE SCARIFIER ARRANGEMENT
AN ATTACHMENT
HYDRAULIC SCARIFIER GROUP
8D-8595 HYDRAULIC SCARIFIER GROUP
8D8595 HYDRAULIC SCARIFIER GROUP--Part 1 of 2--Type 1
Part of 9D5470 VEE Scarifier Arrangement listed on Page 223
8D-8595 HYDRAULIC SCARIFIER GROUP
8D8595 HYDRAULIC SCARIFIER GROUP--Part 2 of 2--Type 1
Part of 9D5470 VEE Scarifier Arrangement listed on Page 223
HYDRAULIC SCARIFIER GROUP
8D-8595 HYDRAULIC SCARIFIER GROUP
8D8595 HYDRAULIC SCARIFIER GROUP--"V" Type--Part 1 of 2--Type 2
Replaced by 2G5570 shown on Page 227C and 227D
Part of 9D5470 VEE Scarifier Arrangement listed on Page 223
AN ATTACHMENT
8D-8595 HYDRAULIC SCARIFIER GROUP
8D8595 HYDRAULIC SCARIFIER GROUP--"V" Type--Part 2 of 2--Type 2
Replaced by 2G5570 shown on Pages 227C and 227D
Part of 9D5470 VEE Scarifier Arrangement listed on Page 223
AN ATTACHMENT
HYDRAULIC SCARIFIER GROUP
2G-5570 HYDRAULIC SCARIFIER GROUP
2G5570 HYDRAULIC SCARIFIER GROUP--"V" Type--Part 1 of 2
Part of 9D5470 VEE Scarifier Arrangement listed on Page 223
AN ATTACHMENT
2G-5570 HYDRAULIC SCARIFIER GROUP
2G5570 HYDRAULIC SCARIFIER GROUP--"V" Type--Part 2 of 2
Part of 9D5470 VEE Scarifier Arrangement listed on Page 223
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Test Procedure For Automatic Blade Control On Articulated Motor Graders{5216}
Test Procedure For Automatic Blade Control On Articulated Motor Graders{5216}
Installation of 8W2408 Blade Float Arrangement{5241}
Installation of 8W2408 Blade Float Arrangement{5241}
Modifying Early Drawbars To Accept A Bolt-On Ball{6153, 6157, 6170, 6171}
Modifying Early Drawbars To Accept A Bolt-On Ball{6153, 6157, 6170, 6171}
Installation Of 2G6820, 2G6830, 2G6840 And 2G6850 Sideshift Extension Groups{5227}
Installation Of 2G6820, 2G6830, 2G6840 And 2G6850 Sideshift Extension Groups{5227}
Installation Of Blade Cushion Accumulator Arrangements{5077}
Installation Of Blade Cushion Accumulator Arrangements{5077}
Installation Of Blade Float Attachment Arrangements{6150}
Installation Of Blade Float Attachment Arrangements{6150}
Modifications To Blade Cushion Attachments{5077}
Modifications To Blade Cushion Attachments{5077}
Specifications
Blade Tip
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Centershift And Blade Lift
12G, 130G, 140G MOTOR GRADERS HYDRAULIC SYSTEM AND STEERING
Blade Lift Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Reuse And Salvage Guidelines
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Disassembly and Assembly
Blade Lift Cylinders
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Arms
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Bar
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Tip Cylinder
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Swivel Joint
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Assembly
12G, 120G, 130G & 140G MOTOR GRADER VEHICLE SYSTEMS
Blade Lift Lock Check And Relief Valve
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Tip Lock Check Valve
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Circle Drive And Blade Sideshift Lock Check Valves
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Lock Check Valve
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Lock Check And Relief Valve And Lock Check Valves
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Cylinders
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Arms
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Lift Bar
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Sideshift Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Tip Cylinder
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Blade Assembly
12G,130G & 140G MOTOR GRADERS VEHICLE SYSTEMS
Service Magazine
Valve Assembly Used In Centershift Lock Control Group To Prevent Accidental Rotation And Lowering Of Blade{5220,5221,5223,6151}
1980/10/20
Valve Assembly And Nipple Moved From Centershift Lock Control Group To Brake Control Group To Prevent Unauthorized Operation{4282,4267,5220,5221,5223,6151}
1980/11/10
Replacement Moldboard Rail Sections Are Available{5230,6151}
1981/08/10
Shorter Wiper Blade Prevents Contact With Windshield Seal{7305}
1981/11/23
Correct Position Of Shims In Blade Lift And Centershift Cylinder Groups{5102,5223}
1982/04/12
New, Narrower Blade Tip Brackets Used{5254,6154}
1982/10/11
New Wear Strips For Moldboard Rail Will Increase Service Life Of The Rail{5230}
1984/03/12
Steel Wear Strips Available For Motor Grader Blade Rail{6150,6153}
1986/06/02
Modification Of Circuitry In 9D6720 Junction Box Prevents Failure Of Automatic Blade Control{5260}
1977/03/21
New Windshield Wiper Group Uses Single Arm Instead Of Double Parallel Arm, And Shorter Blade Arc (Movement){7305}
1977/04/11
Centershift Extension Groups: A Better Method To Cut A Bank Slope At A 2:1 Ratio{5229,6151}
1977/04/11
New Accumulator With Improved Piston And Seals Used In Blade Cushion Arrangement And Steering System{5077,5200,4300}
1977/06/20
Correct Adjustment Of Automatic Blade Control For Accuracy Of Slope Angle Cut In Relation To Slope Control Dial Position{5216}
1977/10/03
New Adjustable Rail Wear Strip Kit Available For Blade Brackets{5254,5230}
1987/07/06
Changes Can Be Made To Improve Blade Cushion Arrangement{5200,6150,5077}
1978/12/04
Modification To Make The Snow Wing And/Or Blade Sideshift Move Faster{5227,6150}
1988/04/18
New Blade Lift And Centershift Cylinders Have Caps With Shims For Adjustment{5102,5223}
1979/03/12
Adjustment Procedure For Blade Lift Cylinders And Centershift Cylinders{5223,5102}
1979/03/26
More Information About Use Of Shims With New One-Piece Wear Strips In Circle Groups For Hydraulic Sideshift Moldboards{6154,6151}
1979/07/02
Moldboard Repair Plates Are Adaptable To Current Machines{6151}
1979/12/10
Adjustable Wear Strip Kit Available For Blade Cylinder Tip Bracket {5254,5230}
1989/05/08
During Predelivery, Make Sure Nitrogen Charge Pressure Is Correct In Blade Cushion Accumulators{5077}
1989/10/16
Steel Wear Strips Can Be Modified To Make Them Adjustable {6151}
1990/02/05
New End Bits Used On Moldboards {6804}
1992/03/09
Lock Group Available For Plow/Dozer On Motor Graders Equipped With Load Sensing Hydraulics {5116,5100}
1993/01/18
New Blade Lift Valves Used For Easier Addition Of Valve Sections To The Valve Group {5051}
1993/10/04
Lock Valve Group With A Relief For Right Blade Lift Cylinder Is Available On Motor Graders{5102,5100}
1994/02/07
Thicker Retaining Ring Is Available For Use With CAT® GraderBit Assemblies{6151,6150}
1994/02/14
Replaceable Sleeve Bearings Can Be Installed In The Circle Assembly And Moldboard Rail Brackets {6154,6157}
1994/02/21
6G-2943 Circle Assembly Can Be Reinforced To Improve Service Life In Severe Applications {6154,6157}
1994/02/28
Special Instructions SEHS9896, REHS0037 And REHS0038 Available For Installation Of A Bolt-On Ball On Early Drawbars{6153,6157,6170,6171}
1996/11/11
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Hardened Full Length Moldboard Rails Are Available for Parts Service {6151}
2002/07/08
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Snap Ring Improves Rod Wiper Seal Retention {4303,5101,5102,5104,5213}
1999/07/12
Special Instruction
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
Procedure To Adjust Support Bearing Preload And Gear Backlash (Tooth Clearance) For Bevel Gear And Pinion{3258,3256,3257}
1980/04/14
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
New Circle Guide Shoes Can Be Adjusted For Better Control Of Clearance Between Circle Teeth And Drive Pinion{6155,6153}
1981/07/13
6V6037, 6V6038, And 6V6039 Template Available For Installation Of Circle Tooth Segments{0626,6152}
1982/05/10
Improved Circle Tooth Segment{6152}
1982/08/16
Modification To Permit Installation Of Locking Pin In Scarifier Shank Holder{6811}
1978/02/20
Circle Segments Are Now Available To Make Repairs To Circles That Have Cracked Or Broken Teeth{6154}
1979/02/05
New Heavy-Duty Ripper Shank And Tips Available {6808,6810}
1989/05/08
New End Bits Used On Moldboards {6804}
1992/03/09
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
New Adapters for the Moldboard are Now Available on Certain Motor Graders {6174, 6801, 6804}
2015/02/10
Special Instruction
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Service Magazine
New Heavy-Duty Ripper Shank And Tips Available {6808,6810}
1989/05/08
New Cam Adjustable Link Now Used With Motor Grader Rippers{6166}
1994/07/18
An Improved Lower Link for the Ripper Assembly is Available {6313, 6324}
2000/07/17
Special Instruction
Installation Of 2G6835 And 2G6845 Vee And 2G7155 Straight Scarifier Arrangements{6162}
Installation Of 2G6835 And 2G6845 Vee And 2G7155 Straight Scarifier Arrangements{6162}
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Installation Of 12G, 14G, 130G And 140G Ripper-Scarifier (26V, 39V, 47W){5351, 6325, 6165}
Specifications
Scarifier Group
12G, 120G, 130G & 140G MOTOR GRADERS HYDRAULIC SYSTEM & STEE
Service Magazine
Scarifier Mounting Can Be Modified To Prevent Loosening{6150,6162}
1985/04/29
New Scarifier Arrangements Have Several Design Improvements{6162}
1978/01/23
Modification To Permit Installation Of Locking Pin In Scarifier Shank Holder{6811}
1978/02/20
New Articulation And Scarifier Cylinders Have Larger Piston Retaining Bolts{5213,7058}
1988/10/24
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Hydraulic Swivel {0679, 5060}
Thermal Spray Procedures for Hydraulic Swivel {0679, 5060}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.